Nissan Maxima - 2018 Fuse Box Diagram

Nissan Maxima - 2018 Fuse Box Diagram

17.
Push-button ignition switch
(P. 5-11)
18.
Bluetooth® Hands-Free Phone
System*
Cruise control switches
(if so equipped) (P. 5-41)
Intelligent Cruise Control (ICC)
switches (if so equipped) (P. 5-43)
19.
Tilt and telescopic steering (P. 3-26)
20.
Audio control switches*
Vehicle information display control
switches (P. 2-16)
21.
Hood release (P. 3-22)
22.
Fuse box (P. 8-18)
23.
Heated steering wheel switch
(if so equipped) (P. 2-52)
Vehicle Dynamic Control (VDC)
OFF switch (P. 2-53)
Trunk release switch (P. 3-22)
Rear power sunshade switch
(if so equipped) (P. 2-65)
24.
Instrument brightness control
(P. 2-45)
Twin trip odometer reset switch
(P. 2-5)
*: Refer to the separate NissanConnect®
Owner’s Manual.
Refer to the page number indicated in
parentheses for operating details.
Illustrated table of contents
0-7
VQ35DE engine
1.
Engine coolant reservoir (P. 8-4)
2.
Drive belt location (P. 8-14)
3.
Engine oil filler cap (P. 8-6)
4.
Brake fluid reservoir (P. 8-10)
5.
Air cleaner (P. 8-15)
6.
Fuse box (P. 8-18)
7.
Fuse box/Fusible links (P. 8-18)
8.
Fusible links (P. 8-18)
9.
Battery (P. 8-12)
10.
Engine oil dipstick (P.8-6)
11.
Radiator cap (P. 8-4)
12.
Power steering fluid reservoir
(P. 8-10)
13.
Windshield-washer fluid reservoir
(P. 8-11)
Refer to the page number indicated in
parentheses for operating details.
LDI2749
ENGINE COMPARTMENT CHECK
LOCATIONS
0-8
Illustrated table of contents
17.
Push-button ignition switch
(P. 5-11)
18.
Bluetooth® Hands-Free Phone
System*
Cruise control switches
(if so equipped) (P. 5-41)
Intelligent Cruise Control (ICC)
switches (if so equipped) (P. 5-43)
19.
Tilt and telescopic steering (P. 3-26)
20.
Audio control switches*
Vehicle information display control
switches (P. 2-16)
21.
Hood release (P. 3-22)
22.
Fuse box (P. 8-18)
23.
Heated steering wheel switch
(if so equipped) (P. 2-52)
Vehicle Dynamic Control (VDC)
OFF switch (P. 2-53)
Trunk release switch (P. 3-22)
Rear power sunshade switch
(if so equipped) (P. 2-65)
24.
Instrument brightness control
(P. 2-45)
Twin trip odometer reset switch
(P. 2-5)
*: Refer to the separate NissanConnect®
Owner’s Manual.
Refer to the page number indicated in
parentheses for operating details.
Instruments and controls
2-3
VEHICLE INFORMATION DISPLAY
WARNINGS AND INDICATORS
1. No Key Detected
2. Key ID Incorrect
3. Key Battery Low
4. I-Key
System
Error:
See
Owner’s
Manual
5. Shift to Park
6. Push brake and start switch to drive
7. Engine start operation for Intelligent
Key system (if I-Key battery level is low)
8. Release Parking Brake
9. Low Fuel
10. Low Washer Fluid
11. Tire Pressure Low – Add Air
12. Door/Trunk Open
13. Alarm
-
Time
for
a
break?
(if
so
equipped)
14. Power will turn off to save the battery
15. Power turned off to save the battery
16. Reminder: Turn OFF Headlights
17. Headlight System Error: See Owner’s
Manual (if so equipped)
18. Sensor (if so equipped)
19. Park Sensor (if so equipped)
20. Parking
Sensor
Error:
See
Owner’s
Manual (if so equipped)
21. Blind
Spot Warning
(BSW)
and
Rear
Cross Traffic Alert (RCTA) indicator (if so
equipped)
22. Malfunction: See Owner’s Manual (if so
equipped)
23. Chassis
Control
System
Error:
See
Owner’s Manual (if so equipped)
24. Cruise control indicator (if so equipped)
25. Intelligent Cruise Control (ICC) indicator
(if so equipped)
26. Driver Attention Alert — Take a Break? (if
so equipped)
27. Driver Attention Alertness Malfunction
(if so equipped)
28. Shipping Mode On Push Storage Fuse
29. CVT Error: See Owner’s Manual
30. SPORT
31. Illumination indicator
32. Transmission Shift Position indicator
33. Outside Temperature Display
34. Low Outside Temperature Alert
35. Oil and Filter
36. Tire
37. Other
38. Loose Fuel Cap
39. Unavailable: Front Radar Obstruction (if
so equipped)
40. Side Radar Obstruction (if so equipped)
No Key Detected
This warning appears when the Intelligent
Key is left outside the vehicle with the igni-
tion switch in the ON position. Make sure
the Intelligent Key is inside the vehicle.
For additional information, refer to “NISSAN
Intelligent Key®” in the “Pre-driving checks
and adjustments” section of this manual.
Key ID Incorrect
This warning appears when the ignition
switch is placed from the OFF position and
the Intelligent Key is not recognized by the
system. You cannot start the engine with
an unregistered key.
For additional information, refer to “NISSAN
Intelligent Key®” in the “Pre-driving checks
and adjustments” section of this manual.
Instruments and controls
2-27
Malfunction: See Owner’s Manual (if so
equipped)
This warning appears when one or more of
the following systems (if so equipped) is
not functioning properly:
Blind Spot Warning (BSW)
Rear Cross Traffic Alert (RCTA)
If one or more of these warning appears,
have the system checked. It is recom-
mended that you visit a NISSAN dealer for
this service.
Chassis Control System Error: See Own-
er’s Manual (if so equipped)
This
warning
appears
if
the
Integrated
Dynamics-control Module detects an error
in the Intelligent Trace Control, Intelligent
Engine Brake, or the Active Ride Control
systems. Have the system checked. It is
recommended
that
you
visit
a
NISSAN
dealer for this service. For additional infor-
mation, refer to “Chassis control” in the
“Starting
and
driving”
section
of
this
manual.
Cruise control indicator (if so equipped)
This indicator shows the cruise control sys-
tem status.
When cruise control is activated, a green
circle will illuminate to indicate it is set. The
vehicle information display will also display
the speed the cruise control was set at. If
you accelerate past the set speed, the
speed will blink until you either cancel
cruise control or go back to the set speed. If
cruise
control
is
on
and
canceled,
the
speed will be displayed to show the speed
the vehicle will return to if the resume but-
ton is activated.
Intelligent Cruise Control (ICC) indicator
(if so equipped)
This indicator shows the Intelligent Cruise
Control (ICC) system status. The status is
shown by the color. For additional informa-
tion, refer to “Intelligent Cruise Control (ICC)”
in the “Starting and driving” section of this
manual.
Driver Attention Alert - Take a Break? (if
so equipped)
This alert appears when the system has
detected that the driver may be displaying
fatigue or a lack of attention.
Driver Attention Alert Malfunction (if so
equipped)
This warning appears when the Driver At-
tention Alert system is not functioning
properly.For additional information,refer to
“Intelligent Driver Alertness (I-DA)” in the
“Starting
and
driving”
section
of
this
manual.
Shipping Mode On Push Storage Fuse
This warning may appear if the extended
storage switch is not pushed in. When this
warning appears, push in the extended
storage switch to turn off the warning. For
additional information, refer to “Extended
storage switch” in this section.
CVT Error: See Owner’s Manual
This warning illuminates when there is a
problem with the CVT system. If this warn-
ing comes on, have the system checked. It
is recommended that you visit a NISSAN
dealer for this service.
2-30
Instruments and controls
The power outlet is for powering electrical
accessories such as cellular telephones. It
is rated at 12 volt, 120W (10A) maximum.
The power outlet is powered only when the
ignition switch is in the ACC or ON position.
CAUTION
∙ The outlet and plug may be hot during
or immediately after use.
∙ Only certain power outlets are de-
signed for use with a cigarette lighter
unit. Do not use any other power out-
let for an accessory lighter. It is rec-
ommended that you visit a NISSAN
dealer for additional information.
∙ Do not use with accessories that ex-
ceed a 12 volt, 120W (10A) power draw.
∙ Do not use double adapters or more
than one electrical accessory.
∙ Use power outlets with the engine
running to avoid discharging the ve-
hicle battery.
∙ Avoid using power outlets when the
air
conditioner,
headlights,
or
rear
window defroster is on.
∙ Before inserting or disconnecting a
plug, be sure the electrical accessory
being used is turned off.
∙ Push the plug in as far as it will go. If
good contact is not made, the plug
may overheat or the internal tem-
perature fuse may open.
∙ When not in use, be sure to close the
cap. Do not allow water or any other
liquid to contact the outlet.
The extended storage switch is used when
the vehicle is in transit from the factory. It is
located in the fuse panel to the left of the
steering wheel on the instrument panel. If
any electrical equipment does not operate,
ensure the extended storage switch is
pushed fully in place, as shown.
Console Box
WIC1119
LDI2758
POWER OUTLET
EXTENDED STORAGE SWITCH
2-54
Instruments and controls
The driver’s seat and steering wheel will
return to the previous position:
When the ignition switch is turned to
ACC or ON while the shift lever is in the P
(Park) position.
The entry/exit function can be adjusted or
canceled through the “Vehicle Settings” in
the vehicle information display by perform-
ing the following:
Switch the Exit Seat Slide from ON to
OFF.
Switch the Exit Steering Up from ON to
OFF.
Restarting the entry/exit function
If the battery cable is disconnected or if the
fuse opens, the stored memory positions
may be lost and some of the functions will
be restricted.
1. Drive the vehicle over 25 mph (40 km/h).
OR
2. Open and close the driver’s door more
than two times with the ignition switch
in the OFF position.
The entry/exit function should now work
properly.
SYSTEM OPERATION
The automatic drive positioner system will
not work or will stop operating under the
following conditions:
When the vehicle speed is above 0 mph
(0 km/h) or 4 mph (7km/h) for some
limited functions such as linking a key
fob
to
the
meter
when
the
power
source is turned on from off or during
the exit function.
When any of the memory switches are
pushed while the automatic drive posi-
tioner is operating.
When the adjusting switch for the driv-
er’s seat and steering column is turned
on while the automatic drive positioner
is operating.
When the seat has already been moved
to the memorized position.
When no seat position is stored in the
memory switch.
When the shift lever is moved from P
(Park) to any other position.
3-34
Pre-driving checks and adjustments
VQ35DE engine
1.
Engine coolant reservoir
2.
Drive belt location
3.
Engine oil filler cap
4.
Brake fluid reservoir
5.
Air cleaner
6.
Fuse box
7.
Fuse box/Fusible links
8.
Fusible links
9.
Battery
10.
Engine oil dipstick
11.
Radiator cap
12.
Power steering fluid reservoir
13.
Windshield-washer fluid reservoir
LDI2749
ENGINE COMPARTMENT CHECK
LOCATIONS
Do-it-yourself
8-3
Under some driving or climate conditions,
occasional brake squeak, squeal or other
noise
may
be
heard. Occasional
brake
noise during light to moderate stops is nor-
mal and does not affect the function or
performance of the brake system.
Proper brake inspection intervals should
be followed.
For additional information re-
garding brake inspections, refer to the ap-
propriate maintenance schedule informa-
tion in the “Maintenance and schedules”
section of this manual.”
If any electrical equipment does not oper-
ate, check for an open fuse.
Fuses are used in the passenger and en-
gine compartment. Spare fuses are pro-
vided and can be found in the passenger
compartment fuse box.
When installing a fuse make sure the fuse is
installed in the fuse box securely.
ENGINE COMPARTMENT
WARNING
Never use a fuse of a higher or lower
amperage rating than that specified on
the fuse box cover. This could damage
the electrical system or electronic con-
trol units or cause a fire.
If any electrical equipment does not come
on, check for an open fuse.
1. Be sure the ignition switch and the
headlight switch are in the OFF posi-
tion.
LDI2385
LDI2636
FUSES
8-18
Do-it-yourself
2. Open the engine hood.
3. Remove the fuse box cover by pushing
the tab and lifting the cover up.
4. Remove the fuse with the fuse puller.
The fuse puller is located in the center
of the fuse block in the passenger
compartment.
5. If the fuse is open
±
A
, replace it with a
new fuse
±
B
.
6. If a new fuse also opens, have the elec-
trical system checked and repaired. It is
recommended that you visit a NISSAN
dealer for this service.
Fusible links
If the electrical equipment does not oper-
ate and fuses are in good condition, check
the fusible links. If any of these fusible links
are
melted,
replace
with
only
Genuine
NISSAN parts.
PASSENGER COMPARTMENT
WARNING
Never use a fuse of a higher or lower
amperage rating than that specified on
the fuse box cover. This could damage
the electrical system or electronic con-
trol units or cause a fire.
LDI0456
LDI2758
Do-it-yourself
8-19
If any electrical equipment does not oper-
ate, check for an open fuse.
1.
Be sure the ignition switch and the head-
light switch are in the OFF position.
2. Pull the fuse box cover to remove.
3. Remove the fuse with the fuse puller
±
A
.
4. If the fuse is open
±
B
, replace it with an
equivalent good fuse
±
C
.
5. Push the fuse box cover to install.
6. If a new fuse also opens, have the elec-
trical system checked and repaired. It is
recommended that you visit a NISSAN
dealer for this service.
LDI2759
LDI2760
8-20
Do-it-yourself