Kia Niro - 2018 Fuse Box Diagram

Kia Niro - 2018 Fuse Box Diagram

H40
The Hybrid battery uses high voltage
to operate the electric motor and
other components and other compo-
nents. High voltage is dangerous if
touched.
Your vehicle is equipped with orange
colored insulation and covers over
the high voltage components to pro-
tect people from electric shock. High
voltage warning labels are attached
to some system components as addi-
tional warnings. Have your vehicle
serviced by an authorized Kia dealer.
WARNING -
High voltage
components
Never touch orange or high
voltage labeled components
including wires,
cables,
and
connections. If the insulators or
covers
are
damaged
or
removed, severe injury or death
from electrocution may occur.
WARNING -
Touching
HPCU
When replacing the fuses in the
engine
compartment,
never
touch the HPCU. The HPCU car-
ries high voltage. Touching the
HPCU could result in electrocu-
tion, serious injury, or death.
ODEQ016002
ODEQ016003
HPCU
HEV Battery
COMPONENTS OF THE HYBRID/PLUG-IN HYBRID VEHICLE (CONT.)
3 49
Safety features of your vehicle
• The SRS can function only when
engine start/stop button is ON
position. If the SRS air bag warning
light does not illuminate, or contin-
uously remains on after illuminat-
ing for about 6 seconds when
engine start/stop button is ON
position, or after the engine is
started, comes on while driving,
the SRS is not working properly. If
this occurs, have your vehicle
immediately
inspected
by
an
authorized Kia dealer.
NOTICE
Before you replace a fuse or discon-
nect a battery terminal, change
Engine Start/Stop button to the OFF
position. Never remove or replace
the air bag related fuse(s) when
engine start/stop button is ON posi-
tion. Failure to heed this warning
will cause the SRS air bag warning
light to illuminate.
Occupant Detection System
(ODS)
Your vehicle is equipped with an
occupant detection system in the
front passenger's seat.
The occupant detection system is
designed to detect the presence of a
properly-seated front passenger and
determine if the passenger's front air
bag should be enabled (may inflate)
or not. Only the front passenger front
air bag is controlled by the Occupant
Detection System.
Do not put anything in front of the
passenger air bag
indicator.
ODE036039N
Features of your vehicle
32
4
When the power window lock
button is pressed :
- The driver's master control can
operate all the power windows.
- The front passenger's control can
operate the front passenger's
power window.
- The rear passenger's control can-
not operate the rear passenger's
power window.
Always double check to make sure
all arms, hands, head and other
obstructions are safely out of the way
before closing a window.
If the window cannot be close
because it is blocked by objects,
remove the objects and close the
window.
CAUTION
- Opening /clos-
ing Window
To prevent possible damage to
the power window system, do
not open or close two windows
or more at the same time. This
will also ensure the longevity of
the fuse.
WARNING
- Power win-
dows
• Do not allow children to play
with the power windows. Keep
the power window lock button
(on the driver's door) in the
LOCK (pressed) position.
• Do not extend a face or arms
outside through the window
opening while driving.
4 43
Features of your vehicle
Sunshade
When opening the sunroof, the sun-
shade will also open. Once the sun-
roof is closed, the sunshade can be
manually closed.
Resetting the sunroof
Whenever the vehicle battery is dis-
connected or discharged, or related
fuse is blown, you must reset your
sunroof system as follows:
1.Turn the ignition switch to the ON
position or start the engine. We
recommend resetting the sunroof
while the engine is running.
2.Close the sunroof completely if
opened.
3.Release the sunroof control lever.
4.Move the sunroof control lever for-
ward in the direction of close until
the sunroof
moves tilt up. Then,
release the lever.
5.Move the sunroof control lever for-
ward in the direction of close, until
the sunroof operates as follows
again:
Tilt down
Slide Open
Slide
Close.
OBK049019
CAUTION
- Sunroof
motor damage
If you try to open the sunroof
when the temperature is below
freezing or when the sunroof is
covered with snow or ice, the
glass or the motor could be
damaged.
WARNING
- Sunroof
Do not extend the face, neck,
arms or body outside through
the sunroof opening while driv-
ing or operating the sunroof.
Features of your vehicle
44
4
NOTICE
Do not release the lever until the
operation is completed.
If you release the lever during oper-
ation, try again from step 2.
6. Release the sunroof control lever
after all operation has completed.
(The sunroof system has been
reset.)
For more detailed information,
contact
an authorized Kia dealer.
NOTICE
If the sunroof is not reset when the
vehicle battery is disconnected or
discharged, or related fuse is blown,
the sunroof may operate improper-
ly.
4 81
Features of your vehicle
Service Mode
Service in
It calculates and displays when you
need a scheduled maintenance
service (mileage or days).
If the remaining mileage or time
reaches 1,500 km (900 mi) or 30
days, “Service in” message is dis-
played for several seconds each time
you set the ignition switch or Engine
Start/Stop Button to the ON position.
Service required
If you do not have your vehicle serv-
iced
according
to
the
already
inputted service interval, “Service
required” message is displayed for
several seconds each time you set
the
ignition
switch
or
Engine
Start/Stop Button to the ON position.
To reset the service interval to the
mileage and days you inputted
before:
- Press the OK button (reset) for
more than 1 second.
Service interval OFF
If the service interval is not set,
“Service interval OFF” message is
displayed on the LCD window.
NOTICE
If any of the following conditions
occurs, the mileage and days may be
incorrect.
- The battery cable is disconnected.
- The fuse switch is turned off.
- The battery is discharged.
OJF045294L
ODEP047243C
ODE046169N
4 85
Features of your vehicle
NOTICE
If any of the following conditions
occur, the mileage and number of
days to service may be incorrect.
- The battery cable is disconnected.
- The fuse switch is turned off.
- The battery is discharged.
Other Features
• Instrument
Cluster
layout
(if
equipped) : Selecting the mode
Simple/Normal/Detailed changes
the LCD screen of the instrument
cluster. (For Type B cluster of Plug-
in Hybrid)
• Aux. Battery Saver + (if equipped)
: If this item is checked, the Aux.
Battery Saver + function will be
activated.
For more details, refer to “Aux.
Battery Saver +” in chapter Intro.
Fuel Economy Auto Reset
- Off : The average fuel economy
will not reset automatically when-
ever refueling.
- After Ignition : The average fuel
economy will reset automatically
whenever it has passed 4 hours
after turning OFF the engine.
- After Refueling : The average fuel
economy will reset automatically
when refueling.
For more details, refer to “Trip
Computer” in this chapter.
• Fuel Economy Unit : Choose the
fuel economy unit. (L/100 km,
km/L, US gallon, UK gallon)
• Temperature Unit : Choose the
temperature unit. (°C, °F)
• Tire Pressure Unit (if equipped) :
Choose the tire pressure unit. (psi,
kPa, bar)
Reset
You can reset the menus in the User
Settings Mode. All menus in the User
Settings Mode are initialized, except
service interval.
Features of your vehicle
88
4
Sunroof Open (if equipped)
• This warning is displayed if you
turn off the engine when the sun-
roof is open.
Turn on FUSE SWITCH (if equipped)
• This warning message illuminates
if the fuse switch under the steer-
ing wheel is OFF.
• It means that you should turn the
fuse switch on.
For more details, refer to “Fuses
in chapter 8.
Engine has overheated
This warning message illuminates
when the engine coolant tempera-
ture is above 120°C (248°F). This
means that the engine is overheated
and may be damaged.
If your vehicle is overheated, refer to
“Overheating” in chapter 7.
OJF045166L
ODE046119
ODE046137L
Features of your vehicle
90
4
Press START button again
(for smart key system)
• This warning message illuminates
if you can not operate the Engine
Start/Stop Button when there is a
problem with the Engine Start/Stop
Button system.
• It means that you could start the
engine by pressing the Engine
Start/ Stop Button once more.
• If the warning illuminates each
time
you
press
the
Engine
Start/Stop Button, have your vehi-
cle inspected by an authorized Kia
dealer.
Press START button with smart key
(for smart key system)
• This warning message illuminates
if you press the Engine Start/Stop
Button while the warning message
“Key not detected” is illuminating.
At this time, the immobilizer indica-
tor light blinks.
Check fuse “BRAKE SWITCH”
(for smart key system)
• This warning message illuminates
if the brake switch fuse is discon-
nected.
• It means that you should replace
the fuse with a new one. If that is
not possible, you can start the
engine by pressing the Engine
Start/Stop Button for 10 seconds in
the ACC position.
Shift to P or N to start engine
(for smart key system)
• This warning message illuminates
if you try to start the engine with
the shift lever not in the P (Park) or
N (Neutral) position.
NOTICE
You can start the engine with the
shift lever in the N (Neutral) posi-
tion. But, for your safety, we recom-
mend that you start the engine with
the shift lever in the P (Park) posi-
tion.
Low Washer Fluid
• This warning message illuminates
on the service reminder mode if
the washer fluid level in the reser-
voir is nearly empty.
• It means that you should refill the
washer fluid.
Low Fuel
• This warning message illuminates
if the fuel tank is nearly empty.
- When the low fuel level warning
light is illuminates.
Add fuel as soon as possible.
Features of your vehicle
156
4
• Only use 12V electric accessories
which are less than 10A in electric
capacity.
Adjust the air-conditioner or heater
to the lowest operating level when
using the power outlet.
Close the cover when not in use.
Some electronic devices can cause
electronic
interference
when
plugged into a vehicle’s power out-
let. These devices may cause
excessive audio static and malfunc-
tions in other electronic systems or
devices used in your vehicle.
Push the plug in as far as it will go.
If good contact is not made, the
plug may overheat and the fuse
may open.
Plug in battery equipped electronic
devices with reverse current pro-
tection. The current from the bat-
tery may flow into the vehicle’s
electri cal/electronic system and
cause system malfunction.
USB charger (if equipped)
The USB charger is designed to
recharge batteries of small size elec-
trical devices using a USB cable.The
electrical devices can be recharged
when the Engine Start/Stop button is
in ACC/ON/START position.
The battery charging state may be
monitored on the electrical device.
Disconnect the USB cable from the
USB port after use.
WARNING -
Electric shock
Do not put a finger or a foreign
element (pen, etc.) into a power
outlet and do not touch with a
wet hand. You may receive an
electric shock.
ODE046434
6 13
Driving your vehicle
• If the battery is weak or the smart
key does not work correctly, you
can start the engine by pressing
the engine start/stop button with
the smart key.
The side with the lock button
should
contact
the
engine
start/stop button directly.
When you press the engine
start/stop button directly with the
smart key, the smart key should
contact the button at a right angle.
When the stop lamp fuse is blown,
you can't start the engine normally.
Replace the fuse with a new one. If
it is not possible, you can start the
engine by pressing the ENGINE
START/STOP button for 10 sec-
onds
while it is in the ACC posi-
tion. The engine can start without
depressing the brake pedal. But for
your safety always depress the
brake pedal before starting the
engine.
Do not press the ENGINE START/
STOP button for more than 10 sec-
onds except when the stop lamp fuse
is blown.
WARNING
- Unintended
vehicle movement
Never leave the smart key in the
vehicle with children or vehicle
occupants who are unfamiliar
with the vehicle operation.
Pushing
the
ENGINE
START/STOP button while the
smart key is in the vehicle may
result in unintended engine
activation and/or unintended
vehicle movement.
ODE056008
8 3
Maintenance
ENGINE COMPARTMENT
ODE076001
Hybrid (Kappa 1.6 GDI)
The actual engine room in the vehicle may differ from the illustration.
1. Engine coolant reservoir
2. Engine oil filler cap
3. Engine oil dipstick
4. Brake fluid reservoir
5. Inverter coolant reservoir
6. Fuse box
7. Engine clutch actuator reservoir tank
8. Air cleaner
9. Windshield washer fluid reservoir
Maintenance
4
8
ODEP077001
Plug-in Hybrid (Kappa 1.6 GDI)
The actual engine room in the vehicle may differ from the illustration.
1. Engine coolant reservoir
2. Engine oil filler cap
3. Engine oil dipstick
4. Brake fluid reservoir
5. Inverter coolant reservoir
6. Fuse box
7. Engine clutch actuator reservoir tank
8. Air cleaner
9. Windshield washer fluid reservoir
8 67
Maintenance
FUSES
Left side : Normal , Right side : Blown
A vehicle’s electrical system is pro-
tected from electrical overload dam-
age by fuses.
This vehicle has 2 (or 3) fuse panels,
one located in the driver’s side panel
bolster, the other in the engine com-
partment near the battery.
If any of your vehicle’s lights, acces-
sories, or controls do not work, check
the appropriate circuit fuse. If a fuse
has blown, the element inside the
fuse will
melt.
If the electrical system does not
work, first check the driver’s side
fuse panel.
Always replace a blown fuse with
one of the same rating.
If the replacement fuse blows, this
indicates an electrical problem. Avoid
using the system involved and imme-
diately consult an authorized Kia
dealer.
Three kinds of fuses are used: blade
type for lower amperage rating, car-
tridge type, and multi fuse for higher
amperage ratings.
Do not arbitrarily modify or add-on
electric wiring to the vehicle.
WARNING
- Fuse replace-
ment
Never replace a fuse with any-
thing but another fuse of the
same rating.
• A higher capacity fuse could
cause damage and possibly a
fire.
• Never install a wire or alu-
minum foil instead of the
proper fuse - even as a tem-
porary repair. It may cause
extensive wiring damage and
a possible fire.
CAUTION
Do not use a screwdriver or any
other metal object to remove
fuses because it may cause a
short circuit and damage the
system.
OJF075021
Blade type
Cartridge type
Multi fuse
BFT
Maintenance
68
8
NOTICE
• When replacing fuse, turn the
ignition “OFF” and
turn off
switches of all electrical devices
then remove battery (-) terminal.
• The actual fuse/relay panel label
may differ from equipped items.
Inner panel fuse replacement
1. Turn the engine start/stop button
to the OFF position and all other
switches off.
2. Open the fuse panel cover.
If the switch is located in the “OFF”
position, a caution indicator will be
displayed in the cluster.
WARNING
- Electrical Fire
Always ensure replacements
fuses and relays are securely
fastened when installed. Failure
to do so can result in a vehicle
fire.
CAUTION
• When replacing a blown fuse
or relay, make sure the new
fuse or relay fits tightly into
the clips. Failure to tightly
install the fuse or relay may
cause damage to the wiring
and electric systems.
• Do not remove fuses, relays
and terminals fastened with
bolts or nuts.The fuses, relays
and terminals may not be fas-
tened correctly which may
cause vehicle damage.
ODE076017
8 69
Maintenance
3. Pull the suspected fuse straight
out. Use the removal tool provided
on the
engine compartment fuse
panel cover.
4. Check the removed fuse; replace it
if it is blown.
Spare fuses are provided in the
engine compartment fuse panel.
5. Push in a new fuse of the same
rating, and make sure it fits tightly
in the clips.
If it fits loosely, consult an authorized
Kia dealer.
If you do not have a spare, use a
fuse of the same rating from a circuit
you may not need for operating the
vehicle, such as the power outlet
fuse.
If the head lamp, turn signal lamp,
stop signal lamp, fog lamp, DRL, tail
lamp, HMSL do not work and the
fuses are OK, check the fuse panel
in the engine compartment. If a fuse
is blown, it must be replaced.
NOTICE
If the headlamp, fog lamp, turn sig-
nal lamp, or tail lamp malfunction
even without any problem to the
lamps, have the vehicle checked by
an authorized Kia dealer for assis-
tance.
CAUTION -
Fuse Panel
Covers
• Set all switches to ON before
driving.
• If the vehicle is going to be
unused for over 1 month, set
all switches to OFF to prevent
the batteries from draining.
• The contact points of the
switches may wear out with
excessive use. Please refrain
from excessive use of the
switches (except for long-term
parking for over 1 month).
ODE076020
Maintenance
70
8
Fuse switch
Always set the fuse switch to the ON
position before using the vehicle.
If you move the switch to the OFF
position, some items such as audio
and digital clock must be reset and
transmitter (or smart key) may not
work properly. When the switch is
Off, the caution indicator will be dis-
played on the instrument cluster.
Always place the fuse switch in the
ON position while driving the vehicle.
If the switch is located in the “OFF”
position, a caution indicator will be
displayed in the cluster.
Engine compartment fuse
replacement
1. Turn the engine start/stop button
to the OFF position
and all other
switches off.
2. Remove the fuse panel cover by
pressing the tab and pulling the
cover up. When the blade type
fuse is disconnected, remove it by
using the clip designed for chang-
ing fuses located in the engine
compartment fuse box.
Upon
removal, securely insert reserve
fuse of the same rating.
3. Check the removed fuse; replace it
if it is blown. To remove or insert
the fuse, use the fuse puller in the
engine compartment fuse panel.
4. Push in a new fuse of the same
rating, and make sure it fits tightly
in the clips. If it fits loosely, consult
an authorized Kia dealer.
CAUTION
After checking the fuse panel in
the
engine
compartment,
securely install the fuse panel
cover through the audible click-
ing sound.
If not, electrical failures may
occur from water contact.
ODE076018
ODE076021
8 71
Maintenance
Multi fuse
If the multi fuse is blown, it must be
removed as follows:
1. Turn off the engine.
2. Disconnect the negative battery
cable.
3. Remove the nuts shown in the pic-
ture above.
4. Replace the fuse with a new one
of the same rating.
5. Reverse these steps to reinstall
the multi fuse.
NOTICE
Do not disassemble nor assemble the
multi fuse when it is secured with
nuts and bolts. Incorrect or partial
assembly torque may cause a fire.
Have the vehicle checked by an
authorized Kia dealer.
Main fuse (Plug-in Hybrid)
If the multi fuse is blown, it must be
removed as follows:
1. Turn off the engine.
2. Disconnect the negative battery
cable.
3. Remove the nuts shown in the pic-
ture above.
4. Replace the fuse with a new one
of the same rating.
5. Reverse these steps to reinstall
the multi fuse.
ODE076022
ODE076023
Maintenance
72
8
NOTICE
The electronic system may not func-
tion correctly even when the engine
compartment and internal fuse
box’s individual fuses are not dis-
connected. In such case the cause of
the problem may be disconnection
of the main fuse (BFT type), which is
located inside the positive battery
terminal (+) cap.
Since the main fuse is designed more
intricately than other parts, have the
vehicle checked by an authorized
Kia dealer.
NOTICE
- Remodeling
Prohibited
Do not rewire your vehicle in any
way as doing so may affect the per-
formance of several safety features
in your vehicle.
Rewiring your vehi-
cle may also void your warranty and
cause you to be responsible for any
subsequent vehicle damage which
may result.
CAUTION
Visually inspect the battery cap
to ensure it is securely closed.
If the battery cap is not securely
closed, moisture may enter the
system and damage the electri-
cal components.
WARNING
- Random
wiring prohibited when
retrofitting equipment
Use of random wiring in the
vehicle might cause danger due
to failure and damage of the
vehicle’s performance.
Using random wires especially
when retrofitting AVN or theft
alarm system, remote engine
control,
car phone or radio
might damage the vehicle or
cause fire.
8 73
Maintenance
Driver’s side fuse panel
Inside the fuse/relay panel covers,
you can find the fuse/relay label
describing fuse/relay name and
capacity.
NOTICE
Not all fuse panel descriptions in
this manual may be applicable to
your vehicle. It is accurate at the
time of printing. When you inspect
the fuse panel in your vehicle, refer
to the fuse panel label.
ODE076066N
ODE076024
Fuse/relay panel description
Driver’s side fuse panel (Hybrid)
Maintenance
74
8
Driver’s side fuse panel
Inside the fuse/relay panel covers,
you can find the fuse/relay label
describing fuse/relay name and
capacity.
NOTICE
Not all fuse panel descriptions in
this manual may be applicable to
your vehicle. It is accurate at the
time of printing. When you inspect
the fuse panel in your vehicle, refer
to the fuse panel label.
ODEP077072N
Driver’s side fuse panel (Plug-in Hybrid)
ODE076024
8 75
Maintenance
Instrument panel (Driver’s side fuse panel) (Hybrid)
Fuse Name
Fuse rating
Circuit Protected
MODULE 5
10A
Electro Chromic Mirror, Audio/Video & Navigation Head Unit, Audio, Driver IMS (Integrated memory system)
Module, VESS (Virtual Engine Sound System) Unit, Shift Lever Indicator, Air Conditioner Control Module,
Rear Seat Warmer Control Module, Front Air Ventilation Seat Control Module, Front Seat Warmer Control
Module, Head Lamp LH/RH
MODULE 4
10A
Lane Keeping Assist Control Module, Crash Pad Switch, AEB Module, Blind Spot Detection Radar LH/RH,
AFLS (Adaptive Front Lighting System) Unit
INTERIOR
LAMP
10A
Front Vanity Lamp LH/RH, Room Lamp, Overhead Console Lamp, Ignition Key ILL. & Door Warning Switch,
Luggage Lamp
A/BAG
15A
SRS (Supplemental Restraint System) Control Module, Passenger Occupant Detection Sensor
IG 1
25A
Engine Room Junction Block (Fuse - DCT4, HPCU2, ACTIVE HYDRAULIC BOOSTER3, ECU3)
CLUSTER
10A
Instrument Cluster
MODULE 3
10A
BCM (Body Control Module), DCT (Dual Clutch Transmission) Shift Lever, Stop Lamp Switch, Driver Door
Module, Passenger Door Module
MEMORY 2
7.5A
Active Air Flap Unit
MODULE 8
10A
Active Air Flap Unit, Electric Water Pump (Engine), VPD Sensor, Engine Room Junction Block (Battery
C/Fan Relay), BMS (Battery Management System) Control Module
A/BAG IND
7.5A
Air Conditioner Control Module, Instrument Cluster
START
7.5A
[Without Smart Key & Without Immobilizer] Burglar alarm Relay
[With Smart Key/With Immobilizer] Inhibitor Switch
Maintenance
76
8
Fuse Name
Fuse rating
Circuit Protected
MODULE 2
10A
Engine Room Junction Block (Power Outlet Relay), Wireless Charger, BCM (Body Control Module), USB
Charger, Smart Key Control Module, Audio, BMS (Battery Management System) Control Module,
Audio/Video & Navigation Head Unit, Driver Power Outside Mirror Switch, AMP (Amplifier)
PDM 3
7.5A
[Without Smart Key] Immobilizer Module
[With Smart Key] Smart Key Control Module
MEMORY 1
10A
Instrument Cluster, Driver IMS (Integrated memory system) Module, BCM (Body Control Module), Air
Conditioner Control Module, Auto Light & Photo Sensor, Driver Door Module, Passenger Door Module, ICM
Relay Box (Outside Mirror Folding/Unfolding Relay), Wireless Charger
MULTI MEDIA
15A
Audio, Audio/Video & Navigation Head Unit
EEWP
10A
Electric Water Pump (HEV)
MDPS
7.5A
MDPS (Motor Driven Power Steering) Unit
TAIL GATE
10A
Tail Gate Relay, ICM Relay Box (Fuel Filler Door Relay), Fuel Filler Switch
PDM 1
15A
Smart Key Control Module
MODULE 7
7.5A
Front Seat Warmer Control Module, AC Inverter (220V), Front Air Ventilation Seat Control Module, Rear
Seat Warmer Module, AC Inverter Module
WIPER (REAR)
15A
Engine Room Junction Block (Wiper RR Relay), Rear Wiper Motor
HEATED
STEERING
15A
BCM (Body Control Module)
SUNROOF
20A
Sunroof Motor
8 77
Maintenance
Fuse Name
Fuse rating
Circuit Protected
P/WINDOW RH
25A
Power Window (RH) Relay, Passenger Safety Power Window Module
P/WINDOW LH
25A
Power Window (LH) Relay, Driver Safety Power Window Module
PDM 2
7.5A
[Without Smart Key] Immobilizer Module
[With Smart Key] Smart Key Control Module, Start/Stop Button Switch
BRAKE SWITCH
7.5A
Stop Lamp Switch, Smart Key Control Module
A/CON
7.5A
Air Conditioner Control Module, Electronic Air Conditioner Compressor, Ionizer, Engine Room Junction
Block (Blower Relay, PTC Heater1 Relay, PTC Heater2 Relay)
WASHER
15A
Multifunction Switch
S/HEATER (FRT)
25A
Front Seat Warmer Control Module, Front Air Ventilation Seat Control Module
BATTERY
MANAGEMENT
10A
BMS (Battery Management System) Control Module
P/SEAT (DRV)
30A
[Without IMS] Driver Seat Manual Switch
[With IMS] Driver Seat Manual Switch, Driver IMS (Integrated memory system) Module
AMP
30A
AMP (Amplifier)
AMS
10A
Not Used
MODULE 1
10A
Data Link Connector, AEB Module, Hazard Switch, Driver/Passenger Door Module, Driver/Passenger Smart
Key Outside Handle, Key Interlock, Natural Vacuum Leak Detection
Maintenance
78
8
Fuse Name
Fuse rating
Circuit Protected
DOOR LOCK
20A
Door Lock/Unlock Relay, ICM Relay Box (Two Turn Unlock Relay)
WIPER 2 (FRT)
10A
Wiper Motor, Engine Room Junction Block (Front Wiper (Low) Relay), ECM (Engine Control Module),
BCM (Body Control Module)
MODULE 6
7.5A
BCM (Body Control Module), Smart Key Control Module
S/HEATER
(REAR)
25A
Rear Seat Warmer Control Module
HEATED
MIRROR
10A
Driver Power Outside Mirror, Passenger Power Outside Mirror, Air Conditioner Control Module
WIPER1 (FRT)
30A
Wiper Motor, Engine Room Junction Block (Front Wiper (Low) Relay)
8 79
Maintenance
Instrument panel (Driver’s side fuse panel) (Plug-in Hybrid)
Fuse Name
Fuse rating
Circuit Protected
MODULE 5
10A
Electro Chromic Mirror, Audio/Video & Navigation Head Unit, Audio, Driver IMS (Integrated memory system)
Module, VESS (Virtual Engine Sound System) Unit, Shift Lever Indicator, Air Conditioner Control Module,
Rear Seat Warmer Control Module, Front Air Ventilation Seat Control Module, Front Seat Warmer Control
Module
MODULE 4
10A
Lane Keeping Assist Control Module, Crash Pad Switch, AEB Module, Blind Spot Detection Radar Left
Handle side/Right Handle side
INTERIOR
LAMP
10A
Front Vanity Lamp LH/RH, Room Lamp, Overhead Console Lamp, Ignition Key ILL. & Door Warning Switch,
Luggage Lamp, Wireless Charger
A/BAG
15A
SRS (Supplemental Restraint System) Control Module, Passenger Occupant Detection Sensor
IG 1
25A
Engine Room Junction Block (Fuse - DCT4, HPCU2, ACTIVE HYDRAULIC BOOSTER3)
CLUSTER
10A
Instrument Cluster
MODULE 3
10A
BCM (Body Control Module), DCT (Dual Clutch Transmission) Shift Lever, Stop Lamp Switch, Driver Door
Module, Passenger Door Module
IG3 2
10A
Fuel Filler Door & Battery Charger Switch, Instument Cluster, Audio, Charger Indicator, Integrated Gateway
Power control Module, Audio/Video & Navigation Head Unit
MEMORY 2
7.5A
Active Air Flap Unit
MODULE 8
10A
Active Air Flap Unit, Electric Water Pump (Engine)
A/BAG IND
7.5A
Air Conditioner Control Module, Instrument Cluster
Maintenance
80
8
Fuse Name
Fuse rating
Circuit Protected
START
7.5A
Transaxle Range Switch
MODULE 2
10A
Engine Room Junction Block (Power Outlet Relay), Wireless Charger, BCM (Body Control Module), USB
Charger, Smart Key Control Module, Audio, Audio / Video & Navigation Head Unit, Power Outside Mirror
Switch, AMP (Amplifier)
PDM3
7.5A
Immobilizer Module, Smart Key Control Module
MEMORY 1
10A
Instrument Cluster, Driver IMS (Integrated memory system) Module, BCM (Body Control Module), Air
Conditioner Control Module, Auto Light & Photo Sensor, Driver Door Module, Passenger Door Module, ICM
Relay Box (Outside Mirror Folding/Unfolding Relay)
MULTI MEDIA
15A
Audio, Audio / Video & Navigation Head Unit
IG3 4
10A
OBC (On-Board Charger) Unit, TCM (Transmission Control Module), ECM (Engine Control Module), HPCU
(Hybrid Power Control Unit)
IG3 3
10A
Electric Water Pump (PHEV)
IG3 5
15A
Transaxle Range Switch, BMS (Battery Management System) Control Module, Engine Room Junction Block
(Battery C/Fan Relay)
IG3 1
20A
ICM Relay Box (IG3 #1, IG3 #2, IG3 #3 Relay)
MDPS
7.5A
MDPS (Motor Driven Power Steering) Unit
TAIL GATE
OPEN
10A
Tail Gate Relay, ICM Relay Box (Fuel Filler Door Relay, Charger Connector Lock/Unlock Relay), Fuel Filler
& Battery Charger Switch, Charge Connector Lamp
PDM 1
15A
Smart Key Control Module
8 81
Maintenance
Fuse Name
Fuse rating
Circuit Protected
MODULE 7
7.5A
Front Seat Warmer Control Module, AC Inverter (220V), Front Air Ventilation Seat Control Module, Rear
Seat Warmer Module, AC Inverter Module
WIPER (REAR)
15A
Engine Room Junction Block (Wiper RR Relay), Rear Wiper Motor
HEATED
STEERING
15A
BCM (Body Control Module)
SUNROOF
20A
Sunroof Motor
P/WINDOW RH
25A
Power Window (RH) Relay, Power Window Main Switch, Passenger Power Window Switch, Rear Power
Window Switch RH, Passenger Safety Power Window Module
P/WINDOW LH
25A
Power Window (LH) Relay, Power Window Main Switch, Rear Power Window Switch LH, Driver Safety
Power Window Module
PDM 2
7.5A
Immobilizer Module, Smart Key Control Module, Start/Stop Button Switch
BRAKE SWITCH
7.5A
Stop Lamp Switch, Smart Key Control Module
OBC
10A
OBC (On-Board Charger) Unit
A/CON
7.5A
Air Conditioner Control Module, Electronic Air Conditioner Compressor, Ionizer, Engine Room Junction
Block (Blower Relay, PTC Heater1 Relay, PTC Heater2 Relay)
WASHER
15A
Multifunction Switch
S/HEATER (FRT)
25A
Front Seat Warmer Control Module, Front Air Ventilation Seat Control Module
Maintenance
82
8
Fuse Name
Fuse rating
Circuit Protected
BATTERY
MANAGEMENT
10A
BMS (Battery Management System) Control Module
P/SEAT (DRV)
30A
Driver Seat Manual Switch, Driver IMS (Integrated memory system) Module
AMP
30A
AMP (Amplifier)
AMS
10A
Battery Sensor
MODULE 1
10A
Data Link Connector, AEB Module, Hazard Switch, Driver/Passenger Door Module, Driver/Passenger Smart
Key Outside Handle
DOOR LOCK
20A
Door Lock/Unlock Relay, ICM Relay Box (Two Turn Unlock Relay)
WIPER2 (FRT)
10A
Wiper Motor, Engine Room Junction Block (Front Wiper (Low) Relay), ECM (Engine Control Module), BCM
(Body Control Module)
MODULE 6
7.5A
BCM (Body Control Module), Smart Key Control Module
S/HEATER
(REAR)
25A
Rear Seat Warmer Control Module
HEATED
MIRROR
10A
Driver Power Outside Mirror, Passenger Power Outside Mirror, Air Conditioner Control Module
WIPER 1 (FRT)
30A
Wiper Motor, Engine Room Junction Block (Front Wiper (Low) Relay)
8 83
Maintenance
Engine compartment fuse panel
ODE076067N
ODE076027N
Maintenance
84
8
Engine room compartment fuse panel (Hybrid)
Fuse Name
Fuse rating
Circuit Protected
MULTI FUSE
B+ 5
60A
Fuse - BATTERY C/FAN, HORN, B/ALARM HORN, ECU2, Engine Control Relay
B+ 2
60A
Instrument Panel Junction Block (Fuse - S/HEATER (REAR))
B+ 3
60A
Instrument Panel Junction Block
B+ 4
50A
Instrument Panel Junction Block (Fuse - BATTERY MANAGEMENT, P/WINDOW (LH), P/WIN-
DOW (RH), TAIL GATE OPEN, SUNROOF, AMP, S/HEATER (FRT), P/SEAT (DRV))
COOLING FAN
60A
Cooling Fan Relay
REAR HEATED
50A
Rear Heated Relay
BLOWER
40A
Blower Relay
IG 1
40A
[Without Smart Key] Ignition Switch, [With Smart Key] PDM1 (ACC) Relay, PDM2 (IG1) Relay
IG 2
40A
[Without Smart Key] Ignition Switch, [With Smart Key] PDM3 (IG2) Relay
MDPS
80A
MDPS (Motor Driven Power Steering) Unit
PTC
HEATER 1
50A
PTC Heater 1 Relay
PTC
HEATER 2
50A
PTC Heater 2 Relay
CLUTCH
ACTUATOR
40A
Clutch Actuator (HEV)
MAIN
150A
Fuse - POWER OUTLET1, H/LAMP HI, INVERTER, ACTIVE HYDRAULIC BOOSTER1,
ACTIVE HYDRAULIC BOOSTER2, WIPER RR, Low Voltage DC-DC Converter
8 85
Maintenance
Fuse Name
Fuse rating
Circuit Protected
FUSE
POWER
OUTLET 3
20A
Power Outlet #2
POWER
OUTLET 2
20A
Power Outlet #1
DCT 3
15A
TCM (Transmission Control Module)
HPCU 1
10A
HPCU (Hybrid Power Control Unit)
EWP
10A
Electric Water Pump (Engine)
FUEL PUMP
20A
Fuel Pump Relay
B + 1
40A
Instrument Panel Junction Block (Fuse - BRAKE SWITCH, PDM1, PDM2, MODULE1, DOOR
LOCK, Leak Current Autocut Device)
DCT 2
40A
TCM (Transmission Control Module)
DCT 1
40A
TCM (Transmission Control Module)
WIPER RR
15A
Wiper RR Relay
H/LAMP HI
10A
H/Lamp HI Relay
ACTIVE
HYDRAULIC
BOOTER 1
40A
Integrated Brake Actuation Unit, Multipurpose Check Connector
Maintenance
86
8
Fuse Name
Fuse rating
Circuit Protected
FUSE
ACTIVE
HYDRAULIC
BOOTER 2
30A
Integrated Brake Actuation Unit
INVERTER
30A
AC Inverter Module
POWER
OUTLET 1
40A
Power Outlet Relay
B/UP LAMP
10A
Electro Chromic Mirror, Back-Up Lamp LH/RH
ECU 3
10A
ECM (Engine Control Module)
HPCU 2
15A
HPCU (Hybrid Power Control Unit), Clutch Actuator (HEV)
ACTIVE
HYDRAULIC
BOOTER 3
10A
Integrated Brake Actuation Unit, Multipurpose Check Connector
DCT 4
15A
DCT (Dual clutch transmission) Shift Lever, TCM (Transmission Control Module), Inhibitor
Switch
SENSOR 3
10A
Fuel Pump Relay, Oil Control Valve #1/#2 (Intake/Exhaust), Camshaft Position Sensor #1/#2
(Intake/Exhaust)
BATTERY C/FAN
15A
Battery C/Fan Relay
HORN
20A
Horn Relay
SENSOR 2
10A
Purge Control Solenoid Valve, Cooling Fan Relay, Canister Close Valve, Mass Air Flow Sensor
ECU 1
20A
ECM (Engine Control Module)
8 87
Maintenance
Fuse Name
Fuse rating
Circuit Protected
FUSE
SENSOR 1
15A
Oxygen Sensor (Up), Oxygen Sensor (Down)
IGN COIL
20A
Ignition Coil #1/#2/#3/#4
ECU 2
15A
ECM (Engine Control Module)
B/ALARM HORN
10A
Burglar Alarm Horn Relay
Maintenance
88
8
Engine room compartment fuse panel (Plug-in Hybrid)
Fuse Name
Fuse rating
Circuit Protected
MULTI FUSE
B+ 5
60A
Fuse - BATTERY C/FAN, HORN, B/ALARM HORN, ECU2, Engine Control Relay
B+ 2
60A
Instrument Panel Junction Block (Fuse - S/HEATER (REAR))
B+ 3
60A
Instrument Panel Junction Block
B+ 4
50A
Instrument Panel Junction Block (Fuse - BATTERY MANAGEMENT, P/WINDOW (LH), P/WIN-
DOW (RH), TAIL GATE OPEN, SUNROOF, AMP, S/HEATER (FRT), P/SEAT (DRV), IG3 1,
OBC, AMS)
COOLING FAN
60A
Cooling Fan Relay
REAR HEATED
50A
Rear Heated Relay
BLOWER
40A
Blower Relay
IG 1
40A
[Without Smart Key] Ignition Switch, [With Smart Key] PDM1 (ACC) Relay, PDM2 (IG1) Relay
IG 2
40A
[Without Smart Key] Ignition Switch, [With Smart Key] PDM3 (IG2) Relay
MDPS
80A
MDPS (Motor Driven Power Steering) Unit
PTC
HEATER 1
50A
PTC Heater 1 Relay
PTC
HEATER 2
50A
PTC Heater 2 Relay
CLUTCH
ACTUATOR
40A
Clutch Actuator (PHEV)
MAIN
150A
Fuse - POWER OUTLET1, H/LAMP HI, INVERTER, ACTIVE HYDRAULIC BOOSTER1,
ACTIVE HYDRAULIC BOOSTER2, WIPER RR, Low Voltage DC-DC Converter
8 89
Maintenance
Fuse Name
Fuse rating
Circuit Protected
FUSE
POWER
OUTLET 3
20A
Power Outlet #2
POWER
OUTLET 2
20A
Power Outlet #1
DCT 3
15A
TCM (Transmission Control Module)
HPCU 1
10A
HPCU (Hybrid Power Control Unit)
EWP
10A
Electric Water Pump (Engine)
FUEL PUMP
20A
Fuel Pump Relay
B + 1
40A
Instrument Panel Junction Block (Fuse - BRAKE SWITCH, PDM1, PDM2, MODULE1, DOOR
LOCK, Leak Current Autocut Device)
DCT 2
40A
TCM (Transmission Control Module)
DCT 1
40A
TCM (Transmission Control Module)
WIPER RR
15A
Wiper RR Relay
H/LAMP HI
10A
H/Lamp HI Relay
ACTIVE
HYDRAULIC
BOOTER 1
40A
Integrated Brake Actuation Unit, Multipurpose Check Connector
Maintenance
90
8
Fuse Name
Fuse rating
Circuit Protected
FUSE
ACTIVE
HYDRAULIC
BOOTER 2
30A
Integrated Brake Actuation Unit
INVERTER
30A
AC Inverter Module
POWER
OUTLET 1
40A
Power Outlet Relay
B/UP LAMP
10A
Electro Chromic Mirror, Back-Up Lamp LH/RH
ECU 3
10A
ECM (Engine Control Module)
HPCU 2
15A
HPCU (Hybrid Power Control Unit), Clutch Actuator (PHEV)
ACTIVE
HYDRAULIC
BOOTER 3
10A
Integrated Brake Actuation Unit, Multipurpose Check Connector
DCT 4
15A
DCT(Dual clutch transmission) Shift Lever, TCM (Transmission Control Module), Inhibitor
Switch
SENSOR 3
10A
Fuel Pump Relay, Oil Control Valve #1/#2 (Intake/Exhaust), Camshaft Position Sensor #1/#2
(Intake/Exhaust)
BATTERY C/FAN
15A
Battery C/Fan Relay
HORN
20A
Horn Relay
SENSOR 2
10A
Purge Control Solenoid Valve, Cooling Fan Relay, Canister Close Valve, Mass Air Flow Sensor
ECU 1
20A
ECM (Engine Control Module)
8 91
Maintenance
Fuse Name
Fuse rating
Circuit Protected
FUSE
SENSOR 1
15A
Oxygen Sensor (Up), Oxygen Sensor (Down)
IGN COIL
20A
Ignition Coil #1/#2/#3/#4
ECU 2
15A
ECM (Engine Control Module)
B/ALARM HORN
10A
Burglar Alarm Horn Relay
Maintenance
94
8
Battery terminal cover
NOTICE
Not all fuse panel descriptions in
this manual may be applicable to
your vehicle. It is accurate at the
time of printing. When you inspect
the fuse panel in your vehicle, refer
to the fuse panel label.
OJFH075172
OJFH075171
8 95
Maintenance
LIGHT BULBS
Bulb replacement precaution
Please keep extra bulbs on hand
with appropriate wattage ratings in
case of emergencies.
Refer to “Bulb Wattage” in chapter 9.
When changing lamps, first turn off
the engine at a safe place, firmly
apply the parking brake and detach
the battery’s negative (-) terminal.
Use only bulbs of the specified
wattage.
NOTICE
If the light bulb or lamp connector
is removed while the lamp is still
on, the fuse box's electronic sys-
tem may log it as a malfunction.
Therefore, a lamp malfunction
incident may be recorded as a
Diagnostic Trouble Code (DTC) in
the fuse box.
It is normal for an operating lamp
to flicker momentarily. This is due
to a stabilization function of the
vehicle’s electronic control device.
If the lamp lights up normally
after momentarily blinking, then
it is functioning as normal.
However, if the lamp continues to
flicker several times or turns off
completely, there may be an error
in the vehicle’s electronic control
device. Please have the vehicle
checked by an authorized Kia
dealer immediately.
WARNING
- Working on
the lights
Prior to working on the light,
firmly apply the parking brake,
ensure
that
the
engine
start/stop button is in OFF posi-
tion and turn off the lights to
avoid sudden movement of the
vehicle and burning your fingers
or receiving an electric shock.
CAUTION -
Light replace-
ment
Be sure to replace the burned-
out bulb with one of the same
wattage rating.
Otherwise,
it
may cause damage to the fuse
or electric wiring system.
CAUTION -
Headlamp
Lens
To prevent damage,
do not
clean the headlamp lens with
chemical solvents or strong
detergents.
Maintenance
96
8
If you don’t have the necessary tools,
the correct bulbs and the expertise,
consult an authorized Kia dealer. In
many cases, it is difficult to replace
vehicle light bulbs because other
parts of the vehicle must be removed
before you can get to the bulb.This is
especially true if you have to remove
the headlamp assembly to get to the
bulb(s).
Removing/installing the headlamp
assembly can result in damage to
the vehicle.
If
non-genuine parts or substandard
bulbs are used, it may lead to blow-
ing a fuse or other wiring damages.
Do not install extra lamps or LEDs to
the vehicle. If additional lights are
installed, it may lead to lamp mal-
functions and flickering. Additionally,
the fuse box and other writing may
be damaged.
Light bulb position (Front)
(1) Headlamp (Low/High) (Bulb type)
(2) Front turn signal lamp (Bulb type)
(3) Position lamp (LED type)
(4) Side marker (Bulb type)
(5) Headlamp (Low/High) (LED type)
(6) Headlamp (Low) (LED type)
(7) Front turn signal lamp/Position
lamp (LED type)
(8) Side marker (LED type)
(9) Day time running lamp (LED
type)
(10) Front fog lamp (Bulb type)
Head lamp - Type B
Head lamp - Type A
ODEP077029N
Fog lamp
ODE076029N
ODEP077030N