Infiniti QX80/QX - 2017 Fuse Box Diagram

Infiniti QX80/QX - 2017 Fuse Box Diagram

Z62-D-110202-8C8F180E-0520-4D0C-9AA2-07D387D3F374
SSI0733
1.
Side ventilator (P.4-43)
2.
Meters and gauges (P.2-6)
3.
Hazard warning flasher switch (P.6-2)
4.
Center ventilator (P.4-43)
5.
Center multi-function control panel
(P.4-3)
— Vehicle
information
and
setting
buttons (P.4-7)
6.
Center display
— Around View
®
Monitor (P.4-21)
— Navigation system**
— DVD player operation (P.4-70)
7.
Clock (P.2-53)
8.
Defroster switch (P.2-38)
9.
Front passenger supplemental air bag
(P.1-54)
10. Fuse box (P.8-20)
11. Parking brake (P.5-22)
12. Hood release handle (P.3-22)
13. Steering wheel
— Horn (P.2-47)
— Driver supplemental air bag
(P.1-54)
— Power steering system (P.5-134)
14. Push-button ignition switch (P.5-12)
15. Climate controlled seat switch*
(P.2-50)/Heated seat switch* (P.2-48)
16. Remote tip-up 2nd row seat switch*
(P.1-9)
17. Heated steering wheel switch (P.2-47)
18. Power outlet (P.2-53)
19. Front passenger air bag status light
(P.1-62)
20. Cup holder (P.2-55)
Illustrated table of contents
0-9
INSTRUMENT PANEL
0-12
Illustrated table of contents
Z62-D-110202-9403BD0A-8FC0-4429-95F9-7EE0FBDAD869
JVC0976X
VK56VD ENGINE
Z62-D-110202-F5728C95-8AB7-4D3F-9C26-000F8895595E
1.
Window washer fluid reservoir
(P.8-11)
2.
Fuse/fusible link holder (P.8-18)
3.
Engine oil dipstick (P.8-6)
4.
Power steering fluid reservoir (P.8-9)
5.
Engine oil filler cap (P.8-6)
6.
Brake fluid reservoir (P.8-10)
7.
Fuse/fusible link holder (P.8-18)
8.
Battery (P.8-12)
9.
Radiator filler cap (P.8-4)
10. Engine coolant reservoir (P.8-4)
11. Drive belts (P.8-14)
12. Air cleaner (P.8-15)
ENGINE COMPARTMENT
Z62-D-110202-A7D4030A-2862-489B-A7AF-66159DF04F04
SSI0733
1.
Side ventilator
2.
Meters and gauges
3.
Hazard indicator flasher switch
4.
Center ventilator
5.
Center multi-function control panel
— Vehicle
information
and
setting
buttons
6.
Center display
— Around View
®
Monitor
— Navigation system**
— DVD player operation
7.
Clock
8.
Defroster switch
9.
Front passenger supplemental air bag
10. Fuse box
11. Parking brake
12. Hood release handle
13. Steering wheel
— Horn
— Driver supplemental air bag
— Power steering system
14. Push-button ignition switch
15. Climate
controlled
seat
switch*/
Heated seat switch*
16. Remote tip-up 2nd row seat switch*
17. Heated steering wheel switch
18. Power outlet
19. Front passenger air bag status light
20. Cup holder
21. Automatic air conditioning system
22. Audio system
23. Glove box
*: if so equipped
**: Refer to the separate Navigation Sys-
tem Owner’s Manual.
Instruments and controls
2-5
INSTRUMENT PANEL
2-18
Instruments and controls
.
Forward Emergency Braking (FEB) sys-
tem warning (if so equipped)
.
Extended storage fuse warning (if so
equipped)
See “Vehicle information display” (P.2-22).
Seat belt warning light and
chime
GUID-0814253C-2DA7-4755-AE28-6292F7CEB3E9
The light and chime remind you to fasten
seat belts. The light illuminates whenever
the ignition switch is pushed to the ON
position, and will remain illuminated until
the driver’s seat belt is fastened. At the
same time, the chime will sound for about
6 seconds unless the driver’s seat belt is
securely fastened.
The seat belt warning light for the front
passenger will illuminate if the seat belt is
not fastened when the front passenger’s
seat
is
occupied.
For
approximately 5
seconds after the ignition switch is in the
ON position, the system does not activate
the warning light for the front passenger.
See “Seat belts” (P.1-19) for precautions
on seat belt usage.
Supplemental air bag warning
light
GUID-C235D6CF-9E94-44B2-9A0A-791836B028D4
After pushing the ignition switch to the ON
position, the supplemental air bag warning
light will illuminate. The supplemental air
bag warning light will turn off after about 7
seconds if the air bag and/or pretensioner
systems are operational.
If any of the following conditions occur, the
air bag and/or pretensioner systems needs
servicing.
.
The supplemental air bag warning light
remains on after approximately 7 sec-
onds.
.
The supplemental air bag warning light
flashes intermittently.
.
The supplemental air bag warning light
does not come on at all.
It is recommended you visit an INFINITI
retailer for these services.
Unless checked and repaired, the supple-
mental restraint system (air bag system)
and/or the pretensioners may not function
properly.
For additional information, see “Supple-
mental restraint system” (P.1-54).
WARNING
If the supplemental air bag warning light is
on, it could mean that the front air bag, side
air bag, curtain air bag systems and/or
pretensioner systems will not operate in an
accident. To help avoid injury to yourself or
others, have your vehicle checked by a
retailer as soon as possible.
Vehicle Dynamic Control (VDC)
warning light
Z62-D-110202-A21C0CCC-8233-4804-99FE-34F6086D39A7
The light will blink when the VDC system or
the traction control system is operating,
thus alerting the driver that the vehicle is
nearing its traction limits. The road surface
may be slippery.
When the VDC warning light illuminates
when the VDC system is turned on, this
light alerts the driver to the fact that the
VDC system’s fail-safe mode is operating,
for example the VDC or hill start assist
system may not be functioning properly.
Have the system checked. It is recom-
mended you visit an INFINITI retailer for
this service. If a malfunction occurs in the
system, the VDC system function will be
2-26
Instruments and controls
parking brake is applied.
9. Low fuel warning
Z62-D-110202-0B9AA09A-F108-42F0-942D-F3A90A308EBB
This warning appears when the fuel level in
the tank is getting low. Refuel as soon as it
is convenient, preferably before the fuel
gauge reaches the 0 (Empty) position.
There is a small reserve of fuel remaining
in the tank when the fuel gauge reaches
the 0 (Empty) position.
10. Low washer fluid warning
Z62-D-110202-927EF2ED-C502-4AB1-8686-9A49AA3BE78A
This warning appears when the washer
tank fluid is at a low level. Add washer fluid
as necessary. (See “Window washer fluid”
(P.8-11).)
11. Door/liftgate open warning
(ignition switch is in the ON posi-
tion)
Z62-D-110202-EDCD3B6E-D8A1-49C9-ACC8-D59FCFEB1B43
This warning appears if any of the doors
and/or the liftgate are open or not closed
securely. The vehicle icon indicates which
door or the liftgate is open on the display.
12. Loose fuel cap warning
Z62-D-110202-6669BB8C-55C8-4A9F-920D-2FB21A5A43C8
This warning appears when the fuel-filler
cap is not tightened correctly after the
vehicle has been refueled. (See “Fuel-filler
cap” (P.3-28).)
13. Check tire pressure warning
Z62-D-110202-F1C1AE6E-7DFD-4B4C-A2F3-BBC23AC21A09
This warning appears when the low tire
pressure warning light in the meter illumi-
nates and low tire pressure is detected.The
warning appears each time the ignition
switch is placed in the ON position as long
as the low tire pressure warning light
remains illuminated. If this warning ap-
pears, stop the vehicle and adjust the tire
pressure to the recommended COLD tire
pressure shown on the Tire and Loading
Information label. (See “Low tire pressure
warning light” (P.2-16) and “Tire Pressure
Monitoring System (TPMS)” (P.5-5).)
14. Extended storage fuse warning
(if so equipped)
GUID-7DA1636E-6A7A-4E8F-B601-658D874CC489
This warning may appear if the extended
storage
fuse
switch
is
not
pushed
in
(switched on). When this warning appears,
push in (switch on) the extended storage
fuse switch to turn off the warning. For
more information, see “Extended storage
fuse switch” (P.8-20).
15. Back-up Collision Intervention
(BCI) not available warning (if so
equipped)
GUID-DBBC21DA-C334-4CE3-8103-539CE6EF8655
This warning appears when the Back-up
Collision Intervention (BCI) system is tem-
porarily not available.
For more details, see “Back-up Collision
Intervention (BCI)” (P.5-56).
16. Back-up Collision Intervention
(BCI) malfunction warning (if so
equipped)
GUID-3FA9A9FF-3D49-4246-AFF4-632006160E82
This warning appears when the Back-up
Collision Intervention (BCI) system is not
functioning properly.
For more details, see “Back-up Collision
Intervention (BCI)” (P.5-56).
17. Headlight warning
GUID-BF7B5A55-CEC2-4AEE-9E36-5392582FD837
This warning appears if the LED headlights
are malfunctioning. It is recommended you
have the system checked by an INFINITI
retailer.
18. Front radar obstruction warning
(if so equipped)
GUID-7CF792FC-2988-437D-942D-44C131CA8C58
This warning appears when the sensor
area of the front bumper is covered with
dirt or is obstructed, making it impossible
to detect a vehicle ahead.
The following systems will be automati-
cally canceled.
2-54
Instruments and controls
SIC4445
Instrument panel
SIC4453
Center console
SIC4456
Back side of front console
SIC4391
Luggage room
Type A (if so equipped)
The power outlet is used for powering
electrical
accessories
such
as
cellular
telephones.
CAUTION
.
The outlet and plug may be hot during or
immediately after use.
.
Do not use with accessories that exceed
a combined power draw of 12 volts,
120W (10A) for all the power outlets. Do
not use double adapters or more than
one electrical accessory.
.
This power outlet is not designed for use
with a cigarette lighter unit.
.
Push the plug in as far as it will go. If
good contact is not made, the plug may
overheat or
the
internal temperature
fuse may blow.
the steering wheel will move up when the
driver’s door is opened with the ignition
switch in the LOCK position.
The driver’s seat and steering wheel will
return to the previous positions when the
ignition
switch
is
pushed
to
the
ACC
position.
The driver’s seat will not return to the
previous positions if the seat or steering
adjusting switch is operated when the seat
is at the exit position.
Cancel or activate entry/exit func-
tion
Z62-D-110202-36B2AB1C-293A-4BB8-A8C4-91B4FF80CB04
The shift lever must be in the P (Park)
position with the ignition switch in the OFF
position.
The entry/exit function can be activated or
canceled by pressing and holding the SET
switch for more than 10 seconds.
The entry/exit function can also be acti-
vated or canceled if the “Lift Steering
Wheel on Exit” key or “Slide Driver Seat
Back on Exit” key is turned to ON or OFF in
the
“Comfort”
settings.
(See
“Vehicle
information and settings” (P.4-7).)
Initialize entry/exit function
Z62-D-110202-707D895A-7A25-406E-AA97-39E093E2D380
If the battery cable is disconnected, or if
the fuse opens, the entry/exit function will
not work though this function was set on
before. In such a case, after connecting the
battery or replacing with a new fuse, open
and close the driver’s door more than two
times after the ignition switch is turned
from the ON position to the LOCK position.
The entry/exit function will be activated.
MEMORY STORAGE
Z62-D-110202-62A92DAD-2A2F-4325-BBE6-39FE9299E0E3
Two positions for the driver’s seat, steering
column and outside mirrors can be stored
in the automatic drive positioner memory.
Follow these procedures to use the mem-
ory system.
1.
Move the shift lever to the P (Park)
position.
2.
Adjust the driver’s seat, steering col-
umn and outside mirrors to the desired
positions by manually operating each
adjusting switch. For additional infor-
mation, see “Seats” (P.1-3) and “Tilt/
telescopic steering” (P.3-30) and “Out-
side mirrors” (P.3-32).
3.
Push the SET switch and, within 5
seconds, push the memory switch (1
or 2) fully for at least 1 second.
The
indicator
light
for
the
pushed
memory switch will stay on for approxi-
mately 5 seconds after pushing the
switch.
When the memory is stored in the
memory switch (1 or 2), a buzzer will
sound.
If
memory
is
stored
in
the
same
memory switch, the previous memory
will be deleted.
Linking Intelligent Key to a stored
memory position
GUID-C9BC757A-173A-4B3E-A57F-5562A0AC4142
The Intelligent Key can be linked to a
stored memory position with the following
procedure.
1.
Follow the steps for storing a memory
position.
2.
While the indicator light for the memory
switch being set is illuminated for 5
seconds, push the
button on the
Intelligent Key. If the indicator light
blinks, the Intelligent Key is linked to
that memory setting.
Push the ignition switch to the OFF posi-
tion, and then push the
button on the
Intelligent Key. The driver’s seat, steering
wheel and outside mirrors will move to the
Pre-driving checks and adjustments
3-35
3-36
Pre-driving checks and adjustments
memorized position.
Confirming memory storage
GUID-9378AE50-C1C2-4613-9D7C-EFD84ABC9796
.
Push the ignition switch to the ON
position and push the SET switch. If
the main memory has not been stored,
the indicator light will come on for
approximately 0.5 second. When the
memory has stored in position, the
indicator light will stay on for approxi-
mately 5 seconds.
.
If the battery cable is disconnected, or if
the fuse opens, the memory will be
canceled. In this case, reset the desired
position using the previous procedure.
.
If optional Intelligent Keys are added to
your vehicle, the memory storage pro-
cedure to switch 1 or 2 and linking
Intelligent Key procedure to a stored
memory position should be performed
again
for
each
Intelligent
Key.
For
additional Intelligent Key information,
see “Keys” (P.3-2).
Selecting the memorized position
Z62-D-110202-61CB8D25-4C16-4408-86C8-3E8C6CB4CD74
1.
Move the shift lever to the P (Park)
position.
2.
Use one of the following methods to
move the driver’s seat, the outside
mirrors and the steering wheel.
.
Within 45 seconds of opening the
driver’s
door,
push
the
memory
switch (1 or 2) fully for at least 1
second.
The driver’s seat, steering column and
outside mirrors will move to the mem-
orized position or to the exit position
when the entry/exit function is set to
active with the indicator light flashing,
and then the light will stay on for
approximately 5 seconds.
SETTING MEMORY FUNCTION
GUID-F0B70533-59E7-4927-939A-3EABF9E152DC
The status of the following settings can be
linked
to
the
Intelligent
Key
and
the
memorized settings can be available for
each Intelligent Key.
.
Air conditioner system
.
Navigation system
.
Audio system
To use the memory function, lock the doors
with the Intelligent Key that is linked to the
settings.
To enable the memorized settings:
1.
Carry the Intelligent Key that is linked
to the settings, and unlock the doors by
pushing the driver’s door handle re-
quest switch or “UNLOCK”
button
on the Intelligent Key.
2.
Push the ignition switch to the “ON”
position. “Connection with the key has
been done” will be displayed on the
screen and the memorized settings are
available (only when a new Intelligent
Key is used).
SYSTEM OPERATION
Z62-D-110202-530B08C3-C309-4A10-8207-69FB04AE47C5
The automatic drive positioner system will
not work or will stop operating under the
following conditions:
.
When the vehicle speed is above 4 MPH
(7 km/h).
.
When
the
adjusting
switch
for
the
driver’s seat and steering column is
turned on while the automatic drive
positioner is operating.
.
When the memory switch 1 or 2 is not
pushed for at least 1 second.
.
When the seat, steering column and
outside
mirrors
have
already
been
moved to the memorized position.
.
When
no
position
is
stored
in
the
memory switch.
.
When the engine is started while mov-
ing the automatic drive positioner.
4-68
Monitor, climate, audio, phone and voice recognition systems
.
OFF AIR (Broadcasting signed off)
.
CHECK ANTENNA (Antenna connection
error)
.
LOADING (When the initial setting is
performed)
.
UPDATING
(When
the
satellite radio
subscription is not active)
.
INVALID
CH
(Invalid
channel
is
re-
ceived.)
SCAN tuning:
GUID-360BCFC6-E409-4BCD-AD41-622C6BFA4831
Push the SCAN tuning button to tune from
low to high frequencies and stop at each
broadcasting station/channel for 5 sec-
onds. Pushing the button again during this
10 seconds period will stop SCAN tuning
and the radio will remain tuned to that
station/channel.
If the SCAN tuning button is not pushed
within 5 seconds, SCAN tuning moves to
the next station/channel.
*
1
to
*
6
Station memory operations:
GUID-4AC75AE4-ADA6-41FC-9981-F2ACBD0E6F56
12 stations/channels can be set for the FM
band (6 each for FM1 and FM2), 18 for
SiriusXM Satellite Radio (6 each for XM1,
XM2 and XM3) and 6 stations can be set for
the AM band.
1.
Choose the radio band using the radio
band select button.
2.
Tune to the desired station/channel
using
the
SEEK·CAT,
TRACK,
SCAN
button or the radio TUNE knob.
3.
Push
and
hold
the
desired
station
preset button
*
1
to
*
6
until the radio
mutes.
4.
The station indicator will then come on
and the sound will resume. Memorizing
is now complete.
5.
Other buttons can be set in the same
manner.
If the battery cable is disconnected, or if
the fuse opens, the radio memory will be
erased. In that case, reset the desired
stations/channels.
Menu (SiriusXM Satellite Radio):
GUID-07030CBC-DFD9-4AD3-A394-4A09EBBEA84A
When the “Menu” key on the display is
selected while the SiriusXM Satellite Radio
is being played, the menu list will be
displayed.
The following items are available.
.
Preset List
Displays the preset channel list. If 1 of
the 6 preset stations listed is touched
and held, the current station will be
stored as the new preset.
.
Customize Channel List
Selects specific channels to skip while
using the TUNE, SEEK·CAT or Menu-
Categories feature.
.
Favorite Artists & Songs
Stores the current artist or song that is
being played. Touch the “Alert” key to
be reminded when the stored artist or
song is playing on a station while
listening to SiriusXM Satellite Radio.
.
Categories
Selecting a category will go to the first
channel in that category as defined by
SiriusXM Satellite Radio.
.
Direct Tune
Inputs the channel number by using a
keypad.
Compact Disc (CD) player operation
Z62-D-110202-8EDF958F-CBBC-4976-8BEB-2FC7318F874F
Push the ignition switch to the ACC or ON
position and insert the Compact Disc (CD)
into the slot with the label side facing up.
The CD will be guided automatically into
the slot and start playing.
After loading the CD, the number of tracks
on the CD and the play time will appear on
the display.
doubt about any servicing, it is recom-
mended you have it done by an INFINITI
retailer.
Z62-D-110202-0FD69969-98CF-4B76-993A-772AC6053520
JVC0976X
VK56VD ENGINE MODEL
Z62-D-110202-CE045E86-1FAB-4B03-A2FF-59AEDA4CE682
1.
Window washer fluid reservoir
2.
Fuse/fusible link holder
3.
Engine oil dipstick
4.
Power steering fluid reservoir
5.
Engine oil filler cap
6.
Brake fluid reservoir
7.
Fuse/fusible link holder
8.
Battery
9.
Radiator filler cap
10. Engine coolant reservoir
11. Drive belts
12. Air cleaner
Do-it-yourself
8-3
ENGINE COMPARTMENT CHECK LOCATIONS
ENGINE COMPARTMENT
Z62-D-110202-EF7088A6-CC7C-4081-9EF3-60446453E90D
WARNING
Never use a fuse of a higher or lower
amperage rating than that specified on the
fuse box cover. This
could
damage the
electrical system or electronic control units
or cause a fire.
If
any
electrical
equipment
does
not
operate, check for an open fuse.
1.
Be sure the ignition switch is pushed to
the
OFF
or
LOCK
position
and
the
headlight switch is turned to OFF.
2.
Open the engine hood and remove the
cover on the battery.
3.
Remove the fuse/fusible link holder
cover
*
1
,
*
2
or
*
3
.
4.
Remove the fuse with the fuse puller.
SDI1753
Type A
SDI1754
Type B
5.
If the fuse is open
*
A
, replace it with a
new fuse
*
B
. Spare fuses are stored in
the passenger compartment fuse box.
6.
If a new fuse also opens, have the
electrical system checked and repaired.
It is recommended you visit an INFINITI
retailer for this service.
Fusible links
Z62-D-110202-236AFFF2-6A85-4D86-8CB6-6A361FB7E742
If
any
electrical
equipment
does
not
operate and fuses are in good condition,
check the fusible links. If any of these
fusible links are melted, replace only with
genuine INFINITI parts.
Do-it-yourself
8-19
8-20
Do-it-yourself
JVM0200X
PASSENGER COMPARTMENT
Z62-D-110202-ADA929EC-C7B9-4E8D-B793-60C0DEBB37E3
WARNING
Never use a fuse of a higher or lower
amperage rating than that specified on the
fuse box cover. This
could
damage the
electrical system or electronic control units
or cause a fire.
If
any
electrical
equipment
does
not
operate, check for an open fuse.
1.
Be sure the ignition switch is pushed to
the
OFF
or
LOCK
position
and
the
headlight switch is turned to OFF.
2.
Open the fuse box lid.
3.
Remove the fuse with the fuse puller
*
A
.
4.
If the fuse is open, replace it with a new
fuse.
5.
If a new fuse also opens, have the
electrical system checked and repaired.
It is recommended you visit an INFINITI
retailer for this service. Spare fuses are
stored in the fuse box.
SDI2704
Extended storage fuse switch (if so
equipped)
GUID-B77E0EC2-D21F-4B62-BCE0-654B39F2DE6F
To
reduce battery
drain,
the
extended
storage fuse switch comes from the factory
switched off. Prior
to delivery of
your
vehicle, the switch is pushed in (switched
on) and should always remain on.
If the extended storage fuse switch is not
pushed in (switched on), the “SHIPPING
MODE ON, PUSH STORAGE FUSE” warning
may appear on the vehicle information
display
(if
so
equipped).
See
“Vehicle
information display” (P.2-22).
If
any
electrical
equipment
does
not
operate, remove the extended storage fuse
switch and check for an open fuse.
NOTE:
If the extended storage fuse switch mal-
functions or if the fuse is open, it is not
necessary to replace the switch. In this
case, remove the extended storage fuse
switch and replace it with a new fuse of the
same rating.
How to remove the extended storage fuse
switch:
GUID-9FE4541A-5A0F-41C1-A9FB-AFF77A7C7E7A
1.
To remove the extended storage fuse
switch, be sure the ignition switch is in
the OFF or LOCK position.
2.
Be sure the headlight switch is in the
OFF position.
3.
Remove the fuse box cover.
4.
Pinch the locking tabs
*
1
found on
each side of the storage fuse switch.
5.
Pull the storage fuse switch straight out
from the fuse box
*
2
.
Z62-D-110202-6334A362-2949-483B-8BD4-808E92561299
CAUTION
Be careful not to allow children to swallow
the battery and removed parts.
SDI2451
Replace the battery as follows:
1.
Release the lock knob at the back of the
Intelligent Key and remove the mechan-
ical key.
2.
Insert a small screwdriver into the slit
of the corner and twist it to separate the
upper part from the lower part. Use a
Do-it-yourself
8-21
INTELLIGENT KEY BATTERY REPLACEMENT
QR25DER engine
1.
Power steering fluid reservoir (P. 8-11)
2.
Engine coolant reservoir (P. 8-4)
3.
Drive belt location (P. 8-15)
4.
Fuse box (P. 8-19)
5.
Engine oil filler cap (P. 8-7)
6.
Inverter coolant reservoir (P. 8-6)
7.
Brake fluid reservoir (P. 8-11)
8.
Air cleaner (P. 8-16)
9.
Fuse/Fusible link box and remote posi-
tive battery terminal (P. 8-19)
10.
Fuse box(P. 8-19)
11.
Fuse/Fusible link box (P. 8-19)
12.
Fuse/Fusible link box (P. 8-19)
13.
12–volt battery (P. 8-13)
14.
Engine oil dipstick (P. 8-7)
15.
Radiator cap (P. 8-4)
16.
Windshield-washer fluid reservoir
(P. 8-12)
Refer to the page number indicated in pa-
rentheses for operating details.
NOTE:
Hybrid system engine compartment cov-
er(s) removed for clarity.
LDI2514
ENGINE COMPARTMENT CHECK
LOCATIONS
0-8
Illustrated table of contents
VEHICLE INFORMATION DISPLAY
WARNINGS AND INDICATORS
1. No Key Detected
2. Key ID Incorrect
3. Key Battery Low
4. I-Key System Error: See Owner’s Manual
5. Key Registration Complete
6. Push brake and start switch to drive
7. Shift to Park
8. Shift to Park Li-ion Battery Low
9. Hybrid System Overheated
10. HV System Warm up Please Wait in Park
11. Push Ignition to OFF
12. Engine start operation for Intelligent Key sys-
tem (if I-Key battery level is low)
13. Release Parking Brake
14. Low Fuel
15. Loose Fuel Cap
16. Low Oil Pressure: See Owner’s Manual
17. Low Washer Fluid
18. Tire Pressure Low - Add Air
19. TPMS Error: See Owner’s Manual
20. AWD Error: See Owner’s Manual (if so
equipped)
21. AWD
High
Temp.
Stop
vehicle
(if
so
equipped)
22. Tire Size Incorrect: See Owner’s Manual (if
so equipped)
23. Door Open
24. Liftgate Open
25. Timer Alert – Have a break?
26. Low Outside Temperature
27. Power will turn off to save the battery
28. Turn off the lights
29. Parking Sensor Error: See Owner’s Manual
30. Predictive
Forward
Collision
Warning
(PFCW) indicator (if so equipped)
31. Lane Departure Warning (LDW) indicator (if
so equipped)
32. Blind Spot Warning (BSW) and Rear Cross
Traffic
Alert
(RCTA)
indicator
(if
so
equipped)
33. Malfunction: See Owner’s Manual (if so
equipped)
34. Intelligent Cruise Control (ICC) indicators (if
so equipped)
35. Cruise control indicators (if so equipped)
36. INFINITI drive mode selector indicators
37. Distance Control Assist (DCA) indicators (if
so equipped)
38. Unavailable:
Front
radar
blocked
(if
so
equipped)
39. Unavailable:
Road
is
slippery
(if
so
equipped)
40. Unavailable:
Snow
Mode
Active
(if
so
equipped)
41. Unavailable: VDC OFF (if so equipped)
42. Unavailable:
High
Cabin
Temp.
(if
so
equipped)
43. Unavailable: Side Radar Obstruction (if so
equipped)
44. Unavailable: High Accelerator Temp. (if so
equipped)
45. BCI OFF (if so equipped)
46. Shipping Mode On Push Storage Fuse
47. CVT Error: See Owner’s Manual
48. High Coolant Temp: See Owner’s Manual
Instruments and controls
2-27
Unavailable: Front radar blocked (if so
equipped)
This
message
appears
when
the
Intelligent
Cruise Control (ICC) or Distance Control Assist
(DCA) systems become unavailable because the
front radar is obstructed. For additional informa-
tion, refer to “Intelligent Cruise Control (ICC)” or
“Distance Control Assist (DCA)” in the “Starting
and driving” section of this manual.
Unavailable: Road is slippery (if so
equipped)
This message appears when the Distance Con-
trol Assist (DCA) system becomes unavailable
because the road is slippery. For additional infor-
mation, refer to “Distance Control Assist (DCA)”
in the “Starting and driving” section of this
manual.
Unavailable: Snow Mode Active (if so
equipped)
This message appears when the Distance Con-
trol Assist (DCA) system becomes unavailable
because the SNOW Mode is selected. For addi-
tional information, refer to “Distance Control As-
sist (DCA)”in the “Starting and driving”section of
this manual.
Unavailable: VDC OFF (if so equipped)
This message appears when the Distance Con-
trol Assist (DCA) system becomes unavailable
because the VDC is turned off. For additional
information, refer to “Distance Control Assist
(DCA)”in the “Starting and driving”section of this
manual.
Unavailable: High Cabin Temp. (if so
equipped)
This message appears when the camera detects
an interior temperature of more than approxi-
mately 104°F (40°C). For additional information,
refer to “Lane Departure Warning (LDW)” in the
“Starting and driving” section of this manual.
Unavailable: Side Radar Obstruction (if so
equipped)
This message appears when the Blind Spot
Warning (BSW)/Rear Cross Traffic Alert (RCTA)
systems become unavailable because a radar
blockage is detected. For additional information,
refer to “Blind Spot Warning (BSW)” or “Rear
Cross Traffic Alert (RCTA)” in the “Starting and
driving” section of this manual.
Unavailable: High Accelerator Temp. (if so
equipped)
This message appears when the Back-up Colli-
sion Intervention (BCI) system becomes unavail-
able because of an interior temperature greater
than approximately 104°F (40°C). For additional
information, refer to “Back-up Collision Interven-
tion (BCI)” in the “Starting and driving” section of
this manual.
BCI OFF (if so equipped)
This message appears when the Back-up Colli-
sion Intervention (BCI) system is turned off using
the BCI switch. For additional information, refer
to “Back-up Collision Intervention (BCI)” in the
“Starting and driving” section of this manual.
Shipping Mode On Push Storage Fuse
This warning may appear if the extended storage
switch is not pushed in. When this warning ap-
pears, push in the extended storage switch to
turn off the warning. For additional information,
refer to “Extended storage switch”in this section.
CVT Error: See Owner’s Manual
This warning illuminates when there is a problem
with the CVT system. If this warning comes on,
have the system checked. It is recommended that
you visit an INFINITI retailer for this service.
2-32
Instruments and controls
Do not use double adapters or more
than one electrical accessory.
Use power outlets with the engine run-
ning to avoid discharging the vehicle
battery.
Avoid using power outlets when the air
conditioner, headlights or rear window
defroster is on.
Before
inserting
or
disconnecting
a
plug, be sure the electrical accessory
being used is turned OFF.
Push the plug in as far as it will go. If
good contact is not made, the plug may
overheat or the internal temperature
fuse may open.
When not in use, be sure to close the
cap. Do not allow water or any other
liquid to contact the outlet.
120V OUTLET (if so equipped)
CAUTION
The outlet and plug may be hot during
or immediately after use.
Use power outlets with the engine run-
ning to avoid discharging the vehicle
battery.
Do not use double adaptors or more
than one electrical accessory.
Avoid using power outlets when the air
conditioner, headlights or rear window
defroster is on.
Before
inserting
or
disconnecting
a
plug, be sure the electrical accessory
being used is turned OFF.
Push the plug in as far as it will go. If
good contact is not made, the plug may
overheat or the internal temperature
fuse may open.
When not in use, be sure to close the
cap. Do not allow water or any other
liquid to contact the outlet.
2nd Row
LIC2215
2-54
Instruments and controls
The extended storage switch is pulled out when
in transit from the factory to the retailer. It is
located in the fuse panel to the left of the steering
wheel on the instrument panel. If any electrical
equipment does not operate, ensure the ex-
tended storage switch is pushed fully in place, as
shown.
LDI2758
Pulled position
LIC3266
Pushed position
LIC3268
EXTENDED STORAGE SWITCH
Instruments and controls
2-55
Restarting the entry/exit function
If the battery cable is disconnected, or if the fuse
opens, the stored memory positions will be lost
and some of the functions will be restricted:
1. Drive the vehicle over 25 mph (40 km/h).
OR
2. Open and close the driver’s door more than
two times with the ignition switch in the OFF
position.
The entry/exit function should now work properly.
SETTING MEMORY FUNCTION
The position of the following settings can be
linked to the Intelligent Key and the memorized
settings can be available for each Intelligent Key.
Climate control system
Navigation system (if so equipped)
Audio system
To use the memory function, set the climate,
navigation and audio systems to the driver’s pre-
ferred settings. Lock the doors with the Intelligent
Key. Each Intelligent Key may be set with the
driver’s individual preferences. When a new In-
telligent Key is used, “Connection with the key
has been done” will be displayed on the screen
and the memorized settings are available.
To engage the memorized settings, perform the
following:
1. Carry the Intelligent Key that is linked to the
memorized settings.
2. Unlock the doors by pushing the driver’s
door
handle
request
switch
or
the
UNLOCK
button on the Intelligent
Key.
3. Place the ignition switch in the ON position.
The settings linked to the Intelligent Key will
start.
For additional information on using the Climate
control system, refer to “Heater and air condi-
tioner (automatic)”in the “Monitor, climate, audio,
phone and voice recognition systems” section of
this manual.
For additional information on using the Naviga-
tion System, refer to the separate Navigation
System Owner’s Manual.
For additional information on using the Audio
system, refer to “Audio system” in the “Monitor,
climate, audio, phone and voice recognition sys-
tems” section of this manual.
SYSTEM OPERATION
The automatic drive positioner system will not
work or will stop operating under the following
conditions:
When the vehicle speed is above 0 mph
(0 km/h) or 4 mph (7km/h) for some limited
functions such as linking a key fob to the
meter when the power source is turned on
from off or during the Exit function.
When any of the memory switches are
pushed while the automatic drive positioner
is operating.
When the adjusting switch for the driver’s
seat and steering column is turned on while
the automatic drive positioner is operating.
When the seat has already been moved to
the memorized position.
When no seat position is stored in the
memory switch.
When the shift lever is moved from P (Park)
to any other position.
3-38
Pre-driving checks and adjustments
QR25DER engine
1.
Power steering fluid reservoir
2.
Engine coolant reservoir
3.
Drive belt location
4.
Fuse box
5.
Engine oil filler cap
6.
Inverter coolant reservoir
7.
Brake fluid reservoir
8.
Air cleaner
9.
Fuse/Fusible link box and remote posi-
tive battery terminal
10.
Fuse box
11
Fuse/Fusible link box
12.
Fuse/Fusible link box
13.
12-volt battery
14.
Engine oil dipstick
15.
Radiator cap
16.
Windshield-washer fluid reservoir
NOTE:
Hybrid system engine compartment cov-
er(s) removed for clarity.
LDI2514
ENGINE COMPARTMENT CHECK
LOCATIONS
Do-it-yourself
8-3
Under some driving or climate conditions, occa-
sional brake squeak, squeal or other noise may
be heard. Occasional brake noise during light to
moderate stops is normal and does not affect the
function or performance of the brake system.
Proper brake inspection intervals should
be followed.
For additional information regard-
ing brake inspections, refer to the appropriate
maintenance schedule information in the
²
Main-
tenance and schedules
²
section of this manual.
ENGINE COMPARTMENT
WARNING
Never use a fuse of higher or lower amper-
age rating than that specified on the fuse
box cover. This could damage the electri-
cal system or electronic control units or
cause a fire.
If any electrical equipment does not come on,
check for an open fuse.
1. Be sure the ignition switch and the headlight
switch are OFF.
2. Open the engine hood.
3. Remove the fuse box cover by pushing the
tab and lifting the cover up.
4. Remove the fuse with the fuse puller. The
fuse puller is located in the fuse block in the
passenger compartment.
LDI2267
FUSES
Do-it-yourself
8-19
5. If the fuse is open
±
A
, replace it with a new
fuse
±
B
.
6. If a new fuse also opens, have the electrical
system checked and repaired. It is recom-
mended that you visit an INFINITI retailer for
this service.
Fusible links
If the electrical equipment does not operate and
fuses are in good condition, check the fusible
links. If any of these fusible links are melted,
replace with only Genuine NISSAN parts.
PASSENGER COMPARTMENT
WARNING
Never use a fuse of higher or lower amper-
age rating than that specified on the fuse
box cover. This could damage the electri-
cal system or electronic control units or
cause a fire.
If any electrical equipment does not operate,
check for an open fuse.
1. Be sure the ignition switch and the headlight
switch are OFF.
2. Pull the fuse box cover to remove.
3. Remove the fuse with the fuse puller.
LDI0456
LDI2092
8-20
Do-it-yourself
4. If the fuse is open
±
A
, replace it with an
equivalent good fuse
±
B
.
5. Push the fuse box cover to install.
6. If a new fuse also opens, have the electrical
system checked and repaired. It is recom-
mended that you visit an INFINITI retailer for
this service.
CAUTION
Be careful not to allow children to swallow
the battery or removed parts.
LDI0456
LDI2001
BATTERY REPLACEMENT
Do-it-yourself
8-21
2. Locate the jumper harness connector under
the lower portion of the instrument panel.
The connector is taped to the wiring harness
±
1
as indicated.
The connector is marked with a white tag
with “elec brake conn”.
Wire color designation for electric trailer brake
controller jumper harness.
WIRE COLOR
NOTE
RED/GREEN
Vehicle stop lamp switch
to trailer brake controller.
BLACK
Brake controller ground
(-).
BROWN/WHITE
Trailer brake controller
switched output.
RED/BLUE
Not used
RED
Fused trailer brake con-
troller battery feed (B+).
3. Peel off the tape and connect the jumper
harness to the connector.
4. Release the parking brake.
5. Install the aftermarket electric trailer brake
controller according to the manufacturer’s
instructions.
Pre-towing tips
Be certain your vehicle maintains a level
position when a loaded and/or unloaded
trailer is hitched. Do not drive the vehicle if it
has an abnormal nose-up or nose-down
condition; check for improper tongue load,
overload, worn suspension or other possible
causes of either condition.
Always secure items in the trailer to prevent
load shift while driving.
Keep the cargo load as low as possible in
the trailer to keep the trailer center of gravity
low.
Load the trailer so approximately 60% of the
trailer load is in the front half and 40% is in
the back half. Also make sure the load is
balanced side to side.
Check your hitch, trailer tire pressure, ve-
hicle tire pressure, trailer light operation, and
trailer wheel lug nuts every time you attach a
trailer to the vehicle.
Be certain your rearview mirrors conform to
all federal, state or local regulations. If not,
install any mirrors required for towing before
driving the vehicle.
Determine the overall height of the vehicle
and trailer so the required clearance is
known.
Trailer towing tips
In order to gain skill and an understanding of the
vehicle’s behavior, you should practice turning,
stopping and backing up in an area which is free
from traffic. Steering stability and braking perfor-
mance will be somewhat different than under
normal driving conditions.
Connector
LTI2046
10-26
Technical and consumer information
2.0L GASOLINE ENGINE
1. Engine coolant reservoir (P. 8-3)
2. Engine oil dipstick (P. 8-5)
3. Engine oil filler cap (P. 8-5)
4. Brake fluid reservoir (P. 8-7)
5. Engine air cleaner filter (P. 8-13)
6. Battery (P. 8-9)
7. Fuse box (P. 8-17)
8. Window washer fluid reservoir (P. 8-8)
NIC2833
ENGINE COMPARTMENT
Illustrated table of contents
0-9
Luggage compartment
The power outlet is used for powering electrical
accessories such as a cellular telephone.
An emergency cut-off ensures that the on-board
voltage does not drop too low. If the on board
voltage is too low, the power to the sockets is
automatically cut. This ensures that there is
sufficient power to start the engine.
CAUTION
The outlet and plug may be hot during or
immediately after use.
Only certain power outlets are designed for
use with a cigarette lighter unit. Do not use
any other power outlet for an accessory
lighter. It is recommended you visit an
INFINITI retailer for additional information.
Do not use with accessories that exceed a 12
volt, 180W (15A) power draw. Do not use
double adapters or more than one electrical
accessory.
Use this power outlet with the engine run-
ning to avoid discharging the vehicle bat-
tery.
Avoid using when the air conditioner, head-
lights or rear window defogger is on.
Push the plug in as far as it will go. If good
contact is not made, the plug may overheat
or the internal temperature fuse may blow.
Before inserting or disconnecting a plug, be
sure that the electrical accessory being
used is turned OFF.
When not in use, be sure to close the cap. Do
not allow water to contact the outlet.
WARNING
Keep the storage lids closed while driving to
help prevent injury in an accident or a sudden
stop.
NIC2684
STORAGE
Instruments and controls
2-77
2.0L GASOLINE ENGINE
1. Engine coolant reservoir (P. 8-3)
2. Engine oil dipstick (P. 8-5)
3. Engine oil filler cap (P. 8-5)
4. Brake fluid reservoir (P. 8-7)
5. Engine air cleaner filter (P. 8-13)
6. Battery (P. 8-9)
7. Fuse box (P. 8-17)
8. Window washer fluid reservoir (P. 8-8)
WARNING
The engine cooling system is filled at the fac-
tory with a high-quality, year-round, antifreeze
coolant solution. The antifreeze solution con-
tains rust and corrosion inhibitors, therefore
additional cooling system additives are not
necessary.
Never remove the radiator or coolant reser-
voir cap when the engine is hot. Wait until
the engine and radiator cool down. Serious
burns could be caused by high-pressure
fluid escaping from the radiator. For addi-
tional information on precautions, refer to
±
If your vehicle overheats
±
in the
±
6. In case
of emergency
±
section
The
engine
coolant
reservoir
tank
is
equipped with a pressure type cap. To pre-
vent engine damage, use only a genuine
INFINITI pressure cap.
CAUTION
Never use any cooling system additives
such as radiator sealer. Additives may clog
the cooling system and cause damage to
the engine, transmission and/or cooling
system.
NIC2833
ENGINE COMPARTMENT CHECK
LOCATIONS
ENGINE COOLING SYSTEM
Do-it-yourself
8-3
If the brakes do not operate properly, it is
recommended
that
you
have
the
brakes
checked. It is recommended that you visit an
INFINITI retailer for this service.
SELF-ADJUSTING BRAKES
Your vehicle is equipped with self-adjusting
brakes. The disc-type brakes self-adjust every
time the brake pedal is applied.
Blown fuses must be replaced with fuses of the
same rating, which you can recognise by the
color and fuse rating. The fuse ratings are listed
in the fuse allocation chart.
If the newly inserted fuse also blows, have the
cause traced and rectified. It is recommended
you visit an INFINITI retailer for this service.
The fuses in your vehicle disconnect faulty
circuits. if a fuse blows, all the components on
the circuit and their functions will fail.
BEFORE REPLACING A FUSE
Secure the vehicle against rolling away.
Switch off all electrical consumers.
Remove the key from the ignition lock.
The fuses are located in various fuse boxes:
Fusebox in the engine compartment on the
left-hand side of the vehicle, when viewed in
the direction of travel.
Fuse box in the front-passenger footwell.
The fuse allocation chart is on the fuse box in
the front-passenger footwell.
ENGINE COMPARTMENT
WARNING
Never use a fuse of higher or lower amperage
rating than that specified on the fuse box
cover. This could damage the electrical system
or electronic control units or cause a fire.
BRAKES
FUSES
Do-it-yourself
8-17
1. Open the hood
2. Remove any existing moisture from the fuse
box using a dry cloth
3. To open: open clamps
±
2
.
4. Fold cover
±
1
up in the direction of the arrow
and remove it.
To close:
1. Check whether the seal is lying correctly in
cover
±
1
.
2. Insert cover
±
1
at the back into openings
±
3
on the fuse box.
3. Fold down cover
±
1
.
4. Hook clamps into the fuse box and close
5. Close the hood.
PASSENGER COMPARTMENT
WARNING
Never use a fuse of higher or lower amperage
rating than that specified on the fuse box
cover. This could damage the electrical system
or electronic control units or cause a fire.
NDI1591
NDI1592
8-18
Do-it-yourself
To open:
1. Open the front-passenger door.
2. Remove the floor mats.
3. Fold out perforated floor covering
±
1
in the
direction of the arrow.
4. To release cover
±
3
press retaining clamp
±
2
.
5. Fold out cover
±
3
in the direction of the arrow
to the catch.
6. Remove cover
±
3
forwards.
NOTE
Fuse allocation chart
±
4
is located on the lower
right-hand side of cover
±
3
.
To close:
1. Insert cover
±
3
on the left-hand side of the
fuse box into the retainer. Cover
±
3
engages
in the retainers.
2. Fold down cover
±
3
until clamps
±
2
lock
audibly.
3. Fold back perforated floor covering
±
1
.
4. Fit the floor mats.
NDI1593
NDI1594
Do-it-yourself
8-19