Infiniti QX80/QX - 2016 Fuse Box Diagram

Infiniti QX80/QX - 2016 Fuse Box Diagram

Z62-D-110202-8C8F180E-0520-4D0C-9AA2-07D387D3F374
SSI0733
1.
Side ventilator (P.4-44)
2.
Meters and gauges (P.2-6)
3.
Hazard warning flasher switch (P.6-2)
4.
Center ventilator (P.4-44)
5.
Center multi-function control panel
(P.4-3)
— Vehicle
information
and
setting
buttons (P.4-7)
6.
Center display
— Around View
®
Monitor (P.4-21)
— Navigation system**
— DVD player operation (P.4-69)
7.
Clock (P.2-52)
8.
Defroster switch (P.2-37)
9.
Front passenger supplemental air bag
(P.1-55)
10. Fuse box (P.8-25)
11. Parking brake (P.5-22)
12. Hood release handle (P.3-20)
13. Steering wheel
— Horn (P.2-46)
— Driver supplemental air bag
(P.1-55)
— Power steering system (P.5-132)
14. Push-button ignition switch (P.5-12)
15. Climate controlled seat switch*
(P.2-48)/Heated seat switch* (P.2-46)
16. Remote tip-up 2nd row seat switch*
(P.1-9)
17. Heated steering wheel switch (P.2-45)
18. Power outlet (P.2-52)
19. Front passenger air bag status light
(P.1-63)
20. Cup holder (P.2-54)
21. Automatic climate control system
(P.4-45)
22. Audio system (P.4-53)
23. Glove box (P.2-57)
*: if so equipped
Illustrated table of contents
0-9
INSTRUMENT PANEL
Z62-D-110202-9403BD0A-8FC0-4429-95F9-7EE0FBDAD869
SDI2585
VK56VD ENGINE
Z62-D-110202-F5728C95-8AB7-4D3F-9C26-000F8895595E
1.
Window washer fluid reservoir
(P.8-15)
2.
Fuse/fusible link holder (P.8-23)
3.
Engine oil dipstick (P.8-10)
4.
Power steering fluid reservoir (P.8-13)
5.
Engine oil filler cap (P.8-10)
6.
Brake fluid reservoir (P.8-14)
7.
Fuse/fusible link holder (P.8-23)
8.
Battery (P.8-16)
9.
Radiator filler cap (P.8-8)
10. Engine coolant reservoir (P.8-8)
11. Drive belts (P.8-18)
12. Air cleaner (P.8-19)
Illustrated table of contents
0-11
ENGINE COMPARTMENT
Z62-D-110202-A7D4030A-2862-489B-A7AF-66159DF04F04
SSI0733
1.
Side ventilator
2.
Meters and gauges
3.
Hazard indicator flasher switch
4.
Center ventilator
5.
Center multi-function control panel
— Vehicle
information
and
setting
buttons
6.
Center display
— Around View
®
Monitor
— Navigation system**
— DVD player operation
7.
Clock
8.
Defroster switch
9.
Front passenger supplemental air bag
10. Fuse box
11. Parking brake
12. Hood release handle
13. Steering wheel
— Horn
— Driver supplemental air bag
— Power steering system
14. Push-button ignition switch
15. Climate
controlled
seat
switch*/
Heated seat switch*
16. Remote tip-up 2nd row seat switch*
17. Heated steering wheel switch
18. Power outlet
19. Front passenger air bag status light
20. Cup holder
21. Automatic air conditioning system
22. Audio system
23. Glove box
*: if so equipped
**: Refer to the separate Navigation Sys-
tem Owner’s Manual.
Instruments and controls
2-5
INSTRUMENT PANEL
the tire pressure, a tire may be flat or the
TPMS may be malfunctioning. If you
have a flat tire, replace it with a spare
tire as soon as possible. If no tire is flat
and all tires are properly inflated, have
the
vehicle
checked
by
an
INFINITI
retailer.
.
Since the spare tire is not equipped with
the TPMS, when a spare tire is mounted
or a wheel is replaced, the TPMS will not
function and the low tire pressure warn-
ing light will flash for approximately 1
minute. The light will remain on after 1
minute. Contact your INFINITI retailer as
soon as possible for tire replacement
and/or system resetting.
.
Replacing tires with those not originally
specified by INFINITI could affect the
proper operation of the TPMS.
CAUTION
.
The TPMS is not a substitute for the
regular tire pressure check. Be sure to
check the tire pressure regularly.
.
If the vehicle is being driven at speeds of
less than 16 MPH (25 km/h), the TPMS
may not operate correctly.
.
Be sure to install the specified size of
tires to the four wheels correctly.
Master warning light
GUID-7DFFAA65-76C1-4AA5-99B3-8E159D329540
When the ignition switch is in the ON
position, the master warning light illumi-
nates if any of the following are displayed
on the vehicle information display:
.
No key warning
.
Low fuel warning
.
Low washer fluid warning
.
Parking brake release warning
.
Door/lift gate open warning
.
Front radar obstruction warning (if so
equipped)
.
Headlight warning
.
Loose fuel cap warning
.
Check tire pressure warning
.
Back-up Collision Intervention (BCI) not
available warning (if so equipped)
.
Back-up
Collision
Intervention
(BCI)
malfunction warning (if so equipped)
.
Forward Emergency Braking (FEB) sys-
tem warning (if so equipped)
.
Extended storage fuse warning (if so
equipped)
See “Vehicle information display” (P.2-22).
Seat belt warning light and
chime
GUID-0814253C-2DA7-4755-AE28-6292F7CEB3E9
The light and chime remind you to fasten
seat belts. The light illuminates whenever
the ignition switch is pushed to the ON
position, and will remain illuminated until
the driver’s seat belt is fastened. At the
same time, the chime will sound for about
6 seconds unless the driver’s seat belt is
securely fastened.
The seat belt warning light for the front
passenger will illuminate if the seat belt is
not fastened when the front passenger’s
seat
is
occupied.
For
approximately 5
seconds after the ignition switch is in the
ON position, the system does not activate
the warning light for the front passenger.
See “Seat belts” (P.1-19) for precautions
on seat belt usage.
Supplemental air bag warning
light
GUID-C235D6CF-9E94-44B2-9A0A-791836B028D4
After pushing the ignition switch to the ON
position, the supplemental air bag warning
Instruments and controls
2-17
8. Parking brake release warning
Z62-D-110202-04DEDFA3-5DB8-4CAD-B3E1-30046C14D6ED
This warning appears when the vehicle
speed is above 4 MPH (7 km/h) and the
parking brake is applied.
9. Low fuel warning
Z62-D-110202-0B9AA09A-F108-42F0-942D-F3A90A308EBB
This warning appears when the fuel level in
the tank is getting low. Refuel as soon as it
is convenient, preferably before the fuel
gauge reaches the 0 (Empty) position.
There is a small reserve of fuel remaining
in the tank when the fuel gauge reaches
the 0 (Empty) position.
10. Low washer fluid warning
Z62-D-110202-927EF2ED-C502-4AB1-8686-9A49AA3BE78A
This warning appears when the washer
tank fluid is at a low level. Add washer fluid
as necessary. (See “Window washer fluid”
(P.8-15).)
11. Door/lift gate open warning
(ignition switch is in the ON posi-
tion)
Z62-D-110202-EDCD3B6E-D8A1-49C9-ACC8-D59FCFEB1B43
This warning appears if any of the doors
and/or the lift gate are open or not closed
securely. The vehicle icon indicates which
door or the lift gate is open on the display.
12. Loose fuel cap warning
Z62-D-110202-6669BB8C-55C8-4A9F-920D-2FB21A5A43C8
This warning appears when the fuel-filler
cap is not tightened correctly after the
vehicle has been refueled. (See “Fuel-filler
cap” (P.3-26).)
13. Check tire pressure warning
Z62-D-110202-F1C1AE6E-7DFD-4B4C-A2F3-BBC23AC21A09
This warning appears when the low tire
pressure warning light in the meter illumi-
nates and low tire pressure is detected.The
warning appears each time the ignition
switch is placed in the ON position as long
as the low tire pressure warning light
remains illuminated. If this warning ap-
pears, stop the vehicle and adjust the tire
pressure to the recommended COLD tire
pressure shown on the Tire and Loading
Information label. (See “Low tire pressure
warning light” (P.2-16) and “Tire Pressure
Monitoring System (TPMS)” (P.5-5).)
14. Extended storage fuse warning
(if so equipped)
GUID-7DA1636E-6A7A-4E8F-B601-658D874CC489
This warning may appear if the extended
storage
fuse
switch
is
not
pushed
in
(switched on). When this warning appears,
push in (switch on) the extended storage
fuse switch to turn off the warning. For
more information, see “Extended storage
fuse switch” (P.8-25).
15. Back-up Collision Intervention
(BCI) not available warning (if so
equipped)
GUID-DBBC21DA-C334-4CE3-8103-539CE6EF8655
This warning appears when the Back-up
Collision Intervention (BCI) system is tem-
porarily not available.
For more details, see “Back-up Collision
Intervention (BCI) system” (P.5-56).
16. Back-up Collision Intervention
(BCI) malfunction warning (if so
equipped)
GUID-3FA9A9FF-3D49-4246-AFF4-632006160E82
This warning appears when the Back-up
Collision Intervention (BCI) system is not
functioning properly.
For more details, see “Back-up Collision
Intervention (BCI) system” (P.5-56).
17. Headlight warning
GUID-BF7B5A55-CEC2-4AEE-9E36-5392582FD837
This warning appears if the LED headlights
are
malfunctioning.
Have
the
system
checked by an INFINITI retailer.
18. Front radar obstruction warning
(if so equipped)
GUID-7CF792FC-2988-437D-942D-44C131CA8C58
This warning appears when the sensor
area of the front bumper is covered with
Instruments and controls
2-25
SIC4456
Back side of front console
SIC4391
Luggage room
Type A (if so equipped)
The power outlet is used for powering
electrical
accessories
such
as
cellular
telephones.
CAUTION
.
The outlet and plug may be hot during or
immediately after use.
.
Do not use with accessories that exceed
a combined power draw of 12 volts,
120W (10A) for all the power outlets. Do
not use double adapters or more than
one electrical accessory.
.
This power outlet is not designed for use
with a cigarette lighter unit.
.
Push the plug in as far as it will go. If
good contact is not made, the plug may
overheat or
the
internal temperature
fuse may blow.
SIC2648
Main switch
Type B (if so equipped)
The power outlet (plug type) is located on
the back side of the front console. It can
operate when the ignition switch in the ON
position and the main switch (located in
the console box) is ON.
The specification of this power outlet is for
use of a 120 volt, 150W (1.25A) power
draw.
To turn on or off the power supply to the
outlet, push the ON
*
1
or OFF
*
2
side of
the main switch. When the switch is turned
to the ON position, the indicator light
*
A
will illuminate.
Instruments and controls
2-53
the steering wheel will move up when the
driver’s door is opened with the ignition
switch in the LOCK position.
The driver’s seat and steering wheel will
return to the previous positions when the
ignition
switch
is
pushed
to
the
ACC
position.
The driver’s seat will not return to the
previous positions if the seat or steering
adjusting switch is operated when the seat
is at the exit position.
Cancel or activate entry/exit func-
tion
Z62-D-110202-36B2AB1C-293A-4BB8-A8C4-91B4FF80CB04
The shift lever must be in the P (Park)
position with the ignition switch in the OFF
position.
The entry/exit function can be activated or
canceled by pressing and holding the SET
switch for more than 10 seconds.
The entry/exit function can also be acti-
vated or canceled if the “Lift Steering
Wheel on Exit” key or “Slide Driver Seat
Back on Exit” key is turned to ON or OFF in
the
“Comfort”
settings.
(See
“Vehicle
information and settings” (P.4-7).)
Initialize entry/exit function
Z62-D-110202-707D895A-7A25-406E-AA97-39E093E2D380
If the battery cable is disconnected, or if
the fuse opens, the entry/exit function will
not work though this function was set on
before. In such a case, after connecting the
battery or replacing with a new fuse, open
and close the driver’s door more than two
times after the ignition switch is turned
from the ON position to the LOCK position.
The entry/exit function will be activated.
MEMORY STORAGE
Z62-D-110202-62A92DAD-2A2F-4325-BBE6-39FE9299E0E3
Two positions for the driver’s seat, steering
column and outside mirrors can be stored
in the automatic drive positioner memory.
Follow these procedures to use the mem-
ory system.
1.
Move the shift lever to the P (Park)
position.
2.
Adjust the driver’s seat, steering col-
umn and outside mirrors to the desired
positions by manually operating each
adjusting switch. For additional infor-
mation, see “Seats” (P.1-3) and “Tilt/
telescopic steering” (P.3-28) and “Out-
side mirrors” (P.3-30).
3.
Push the SET switch and, within 5
seconds, push the memory switch (1
or 2) fully for at least 1 second.
The
indicator
light
for
the
pushed
memory switch will stay on for approxi-
mately 5 seconds after pushing the
switch.
When the memory is stored in the
memory switch (1 or 2), a buzzer will
sound.
If
memory
is
stored
in
the
same
memory switch, the previous memory
will be deleted.
Linking Intelligent Key to a stored
memory position
GUID-C9BC757A-173A-4B3E-A57F-5562A0AC4142
The Intelligent Key can be linked to a
stored memory position with the following
procedure.
1.
Follow the steps for storing a memory
position.
2.
While the indicator light for the memory
switch being set is illuminated for 5
seconds, push the
button on the
Intelligent Key. If the indicator light
blinks, the Intelligent Key is linked to
that memory setting.
Push the ignition switch to the OFF posi-
tion, and then push the
button on the
Intelligent Key. The driver’s seat, steering
wheel and outside mirrors will move to the
Pre-driving checks and adjustments
3-33
3-34
Pre-driving checks and adjustments
memorized position.
Confirming memory storage
GUID-9378AE50-C1C2-4613-9D7C-EFD84ABC9796
.
Push the ignition switch to the ON
position and push the SET switch. If
the main memory has not been stored,
the indicator light will come on for
approximately 0.5 second. When the
memory has stored in position, the
indicator light will stay on for approxi-
mately 5 seconds.
.
If the battery cable is disconnected, or if
the fuse opens, the memory will be
canceled. In this case, reset the desired
position using the previous procedure.
.
If optional Intelligent Keys are added to
your vehicle, the memory storage pro-
cedure to switch 1 or 2 and linking
Intelligent Key procedure to a stored
memory position should be performed
again
for
each
Intelligent
Key.
For
additional Intelligent Key information,
see “Keys” (P.3-2).
Selecting the memorized position
Z62-D-110202-61CB8D25-4C16-4408-86C8-3E8C6CB4CD74
1.
Move the shift lever to the P (Park)
position.
2.
Use one of the following methods to
move the driver’s seat, the outside
mirrors and the steering wheel.
.
Within 45 seconds of opening the
driver’s
door,
push
the
memory
switch (1 or 2) fully for at least 1
second.
The driver’s seat, steering column and
outside mirrors will move to the mem-
orized position or to the exit position
when the entry/exit function is set to
active with the indicator light flashing,
and then the light will stay on for
approximately 5 seconds.
SETTING MEMORY FUNCTION
GUID-F0B70533-59E7-4927-939A-3EABF9E152DC
The status of the following settings can be
linked
to
the
Intelligent
Key
and
the
memorized settings can be available for
each Intelligent Key.
.
Air conditioner system
.
Navigation system
.
Audio system
To use the memory function, lock the doors
with the Intelligent Key that is linked to the
settings.
To enable the memorized settings:
1.
Carry the Intelligent Key that is linked
to the settings, and unlock the doors by
pushing the driver’s door handle re-
quest switch or “UNLOCK”
button
on the Intelligent Key.
2.
Push the ignition switch to the “ON”
position. “Connection with the key has
been done” will be displayed on the
screen and the memorized settings are
available (only when a new Intelligent
Key is used).
SYSTEM OPERATION
Z62-D-110202-530B08C3-C309-4A10-8207-69FB04AE47C5
The automatic drive positioner system will
not work or will stop operating under the
following conditions:
.
When the vehicle speed is above 4 MPH
(7 km/h).
.
When
the
adjusting
switch
for
the
driver’s seat and steering column is
turned on while the automatic drive
positioner is operating.
.
When the memory switch 1 or 2 is not
pushed for at least 1 second.
.
When the seat, steering column and
outside
mirrors
have
already
been
moved to the memorized position.
.
When
no
position
is
stored
in
the
memory switch.
.
When the engine is started while mov-
ing the automatic drive positioner.
next broadcasting station.
.
For SiriusXM Satellite Radio
Push the SEEK·CAT or TRACK button
or
to tune to the first channel of the
next or previous category.
During satellite radio reception, the follow-
ing notices will be displayed under certain
conditions.
.
NO SIGNAL (No signal is received while
the SAT tuner is connected.)
.
OFF AIR (Broadcasting signed off)
.
CHECK ANTENNA (Antenna connection
error)
.
LOADING (When the initial setting is
performed)
.
UPDATING
(When
the
satellite radio
subscription is not active)
.
INVALID
CH
(Invalid
channel
is
re-
ceived.)
SCAN tuning:
GUID-D73A39BF-43C8-459F-9C24-47B7F579C407
Push the SCAN tuning button to tune from
low to high frequencies and stop at each
broadcasting station/channel for 5 sec-
onds. Pushing the button again during this
10 seconds period will stop SCAN tuning
and the radio will remain tuned to that
station/channel.
If the SCAN tuning button is not pushed
within 5 seconds, SCAN tuning moves to
the next station/channel.
*
1
to
*
6
Station memory operations:
GUID-D73A39BF-43C8-459F-9C24-47B7F579C407
12 stations/channels can be set for the FM
band (6 each for FM1 and FM2), 18 for
SiriusXM Satellite Radio (6 each for XM1,
XM2 and XM3) and 6 stations can be set for
the AM band.
1.
Choose the radio band using the radio
band select button.
2.
Tune to the desired station/channel
using
the
SEEK·CAT,
TRACK,
SCAN
button or the radio TUNE knob.
3.
Push
and
hold
the
desired
station
preset button
*
1
to
*
6
until the radio
mutes.
4.
The station indicator will then come on
and the sound will resume. Memorizing
is now complete.
5.
Other buttons can be set in the same
manner.
If the battery cable is disconnected, or if
the fuse opens, the radio memory will be
erased. In that case, reset the desired
stations/channels.
Menu (SiriusXM Satellite Radio):
GUID-D73A39BF-43C8-459F-9C24-47B7F579C407
When the “Menu” key on the display is
selected while the SiriusXM Satellite Radio
is being played, the menu list will be
displayed.
The following items are available.
.
Preset List
Displays the preset channel list. If 1 of
the 6 preset stations listed is touched
and held, the current station will be
stored as the new preset.
.
Customize Channel List
Selects specific channels to skip while
using the TUNE, SEEK·CAT or Menu-
Categories feature.
.
Favorite Artists & Songs
Stores the current artist or song that is
being played. Touch the “Alert” key to
be reminded when the stored artist or
song is playing on a station while
listening to SiriusXM Satellite Radio.
.
Categories
Selecting a category will go to the first
channel in that category as defined by
SiriusXM Satellite Radio.
.
Direct Tune
Inputs the channel number by using a
keypad.
Monitor, climate, audio, phone and voice recognition systems
4-67
Z62-D-110202-0FD69969-98CF-4B76-993A-772AC6053520
SDI2585
VK56VD ENGINE MODEL
Z62-D-110202-CE045E86-1FAB-4B03-A2FF-59AEDA4CE682
1.
Window washer fluid reservoir
2.
Fuse/fusible link holder
3.
Engine oil dipstick
4.
Power steering fluid reservoir
5.
Engine oil filler cap
6.
Brake fluid reservoir
7.
Fuse/fusible link holder
8.
Battery
9.
Radiator filler cap
10. Engine coolant reservoir
11. Drive belts
12. Air cleaner
Maintenance and do-it-yourself
8-7
ENGINE COMPARTMENT CHECK LOCATIONS
several times. The pedal travel distance
will decrease gradually with each de-
pression
as
the
hydraulic
pressure
decreases.
If the brakes do not operate properly, have
the brakes checked by an INFINITI retailer.
Z62-D-110202-72D2AD23-7C13-452F-9C08-5ED0D5BC2474
SDI2518
SDI2532
ENGINE COMPARTMENT
Z62-D-110202-EF7088A6-CC7C-4081-9EF3-60446453E90D
CAUTION
Never use a fuse of a higher or lower
amperage rating than that specified on the
fuse box cover. This
could
damage the
electrical system or cause a fire.
If
any
electrical
equipment
does
not
operate, check for an open fuse.
1.
Be sure the ignition switch is pushed to
the
OFF
or
LOCK
position
and
the
headlight switch is turned to OFF.
2.
Open the engine hood and remove the
cover on the battery.
3.
Remove the fuse/fusible link holder
cover
*
1
,
*
2
or
*
3
.
4.
Remove the fuse with the fuse puller.
Maintenance and do-it-yourself
8-23
FUSES
8-24
Maintenance and do-it-yourself
SDI1753
Type A
SDI1754
Type B
5.
If the fuse is open
*
A
, replace it with a
new fuse
*
B
. Spare fuses are stored in
the passenger compartment fuse box.
6.
If a new fuse also opens, have the
electrical system checked and repaired
by an INFINITI retailer.
Fusible links
Z62-D-110202-236AFFF2-6A85-4D86-8CB6-6A361FB7E742
If
any
electrical
equipment
does
not
operate and fuses are in good condition,
check the fusible links. If any of these
fusible links are melted, replace only with
genuine INFINITI parts.
JVM0200X
PASSENGER COMPARTMENT
Z62-D-110202-ADA929EC-C7B9-4E8D-B793-60C0DEBB37E3
CAUTION
Never use a fuse of a higher or lower
amperage rating than that specified on the
fuse box cover. This
could
damage the
electrical system or cause a fire.
If
any
electrical
equipment
does
not
operate, check for an open fuse.
1.
Be sure the ignition switch is pushed to
the
OFF
or
LOCK
position
and
the
headlight switch is turned to OFF.
2.
Open the fuse box lid.
3.
Remove the fuse with the fuse puller
*
A
.
4.
If the fuse is open, replace it with a new
fuse.
5.
If a new fuse also opens, have the
electrical system checked and repaired
by an INFINITI retailer. Spare fuses are
stored in the fuse box.
SDI2704
Extended storage fuse switch (if so
equipped)
GUID-B77E0EC2-D21F-4B62-BCE0-654B39F2DE6F
To
reduce battery
drain,
the
extended
storage fuse switch comes from the factory
switched off. Prior
to delivery of
your
vehicle, the switch is pushed in (switched
on) and should always remain on.
If the extended storage fuse switch is not
pushed in (switched on), the “SHIPPING
MODE ON, PUSH STORAGE FUSE” warning
may appear on the vehicle information
display
(if
so
equipped).
See
“Vehicle
information display” (P.2-22).
If
any
electrical
equipment
does
not
Maintenance and do-it-yourself
8-25
8-26
Maintenance and do-it-yourself
operate, remove the extended storage fuse
switch and check for an open fuse.
NOTE:
If the extended storage fuse switch mal-
functions or if the fuse is open, it is not
necessary to replace the switch. In this
case, remove the extended storage fuse
switch and replace it with a new fuse of the
same rating.
How to remove the extended storage fuse
switch:
GUID-D73A39BF-43C8-459F-9C24-47B7F579C407
1.
To remove the extended storage fuse
switch, be sure the ignition switch is in
the OFF or LOCK position.
2.
Be sure the headlight switch is in the
OFF position.
3.
Remove the fuse box cover.
4.
Pinch the locking tabs
*
1
found on
each side of the storage fuse switch.
5.
Pull the storage fuse switch straight out
from the fuse box
*
2
.
Z62-D-110202-6334A362-2949-483B-8BD4-808E92561299
CAUTION
Be careful not to allow children to swallow
the battery and removed parts.
SDI2451
Replace the battery as follows:
1.
Release the lock knob at the back of the
Intelligent Key and remove the mechan-
ical key.
2.
Insert a small screwdriver into the slit
of the corner and twist it to separate the
upper part from the lower part. Use a
INTELLIGENT KEY BATTERY REPLACEMENT
QR25DER engine
1.
Power steering fluid reservoir (P. 8-15)
2.
Engine coolant reservoir (P. 8-8)
3.
Drive belt location (P. 8-19)
4.
Fuse box (P. 8-23)
5.
Engine oil filler cap (P. 8-11)
6.
Inverter coolant reservoir (P. 8-10)
7.
Brake fluid reservoir (P. 8-15)
8.
Air cleaner (P. 8-20)
9.
Fuse/Fusible link box and remote posi-
tive battery terminal (P. 8-23)
10.
Fuse box(P. 8-23)
11.
Fuse/Fusible link box (P. 8-23)
12.
Fuse/Fusible link box (P. 8-23)
13.
12–volt battery (P. 8-17)
14.
Engine oil dipstick (P. 8-11)
15.
Radiator cap (P. 8-8)
16.
Windshield-washer fluid reservoir
(P. 8-16)
Refer to the page number indicated in pa-
rentheses for operating details.
NOTE:
Hybrid system engine compartment cov-
er(s) removed for clarity.
LDI2514
ENGINE COMPARTMENT CHECK
LOCATIONS
0-8
Illustrated table of contents
VEHICLE INFORMATION DISPLAY
WARNINGS AND INDICATORS
1. No Key Detected
2. Key ID Incorrect
3. Shift to Park
4. Push ignition to OFF
5. Key Battery Low
6. Engine start operation for Intelligent Key sys-
tem
7. Release Parking Brake
8. Low Fuel
9. HV System Warm up Please Wait In Park
10. Shutting Down
11. Low Washer Fluid
12. Door Open
13. Liftgate Open
14. Timer Alert – Time for a driver break?
15. Low Outside Temperature
16. Power will turn off to save the battery
17. CVT Error: See Owner’s Manual
18. Reminder: Turn OFF headlights
19. Shift to Park Press Brake & Start
20. Shift to Park Li-ion battery low
21. Low Oil Pressure: See Owner’s Manual
22. Key Registration Complete
23. Tire Pressure Low - Add Air
24. TPMS Error: See Owner’s Manual
25. Parking Sensor Error: See Owner’s Manual
(if so equipped)
26. Loose Fuel Cap
27. Push brake and start button to drive
28. High Coolant Temp: See Owner’s Manual
29. Hybrid System Overheated
30. I-Key System Error: See Owner’s Manual
31. Cruise control indicator (if so equipped)
32. Intelligent Cruise Control (ICC) indicators (if
so equipped)
33. INFINITI drive mode selector indicators
34. Malfunction: See Owner’s Manual (if so
equipped)
35. AWD Error: See Owner’s Manual (if so
equipped)
36. AWD
High
Temp.
Stop
Vehicle
(if
so
equipped)
37. Tire Size Incorrect: See Owner’s Manual (if
so equipped)
38. Unavailable:
Road
is
slippery
(if
so
equipped)
39. Unavailable:
Snow
Mode
Active
(if
so
equipped)
40. Unavailable: VDC OFF (if so equipped)
41. Unavailable:
High
Cabin
Temp
(if
so
equipped)
42. Unavailable: Side Radar Obstruction (if so
equipped)
43. Unavailable: High Accelerator Temp (if so
equipped)
44. BCI OFF (if so equipped)
45. Shipping Mode On Push Storage Fuse
No Key Detected
This warning appears when the Intelligent Key is
left outside the vehicle with the ignition switch in
the ON or ACC position. Make sure the Intelli-
gent Key is inside the vehicle.
Instruments and controls
2-27
Unavailable: Snow Mode Active (if so
equipped)
This message appears when the Distance Con-
trol Assist (DCA) system becomes unavailable
because the SNOW Mode is selected. For addi-
tional information, refer to “Distance Control As-
sist (DCA)”in the “Starting and driving”section of
this manual.
Unavailable: VDC OFF (if so equipped)
This message appears when the Distance Con-
trol Assist (DCA) system becomes unavailable
because the VDC is turned OFF. For additional
information, refer to “Distance Control Assist
(DCA)”in the “Starting and driving”section of this
manual.
Unavailable: High Cabin Temp. (if so
equipped)
This message appears when the camera detects
an interior temperature of more than approxi-
mately 104°F (40°C). For additional information,
refer to “Lane Departure Warning (LDW)” in the
“Starting and driving” section of this manual.
Unavailable: Side Radar Obstruction (if so
equipped)
This message appears when the Distance Con-
trol Assist (DCA) system becomes unavailable
because a radar blockage is detected. For addi-
tional information, refer to “Distance Control As-
sist (DCA)”in the “Starting and driving”section of
this manual.
Unavailable: High Accelerator Temp. (if so
equipped)
This message appears when the Back-up Colli-
sion Intervention (BCI) system becomes unavail-
able because of an interior temperature greater
than approximately 104°F (40°C). For additional
information, refer to “Back-up Collision Interven-
tion (BCI) system” in the “Starting and driving”
section of this manual.
BCI OFF (if so equipped)
This message appears when the Back-up Colli-
sion Intervention (BCI) system is turned OFF
using the BCI switch. For additional information,
refer to “Back-up Collision Intervention (BCI)
system” in the “Starting and driving” section of
this manual.
Shipping Mode On Push Storage Fuse
This warning may appear if the extended storage
switch is not pushed in. When this warning ap-
pears, push in the extended storage switch to
turn off the warning. For additional information,
refer to “Extended storage switch” in the “Instru-
ments and controls” section of this manual.
Your vehicle has two types of security systems:
Vehicle security system
INFINITI Vehicle Immobilizer System
VEHICLE SECURITY SYSTEM
The vehicle security system provides visual and
audible alarm signals if someone opens the
doors, liftgate or hood when the system is armed.
It is not, however, a motion detection type system
that activates when a vehicle is moved or when a
vibration occurs.
The system helps deter vehicle theft but cannot
prevent it, nor can it prevent the theft of interior or
exterior vehicle components in all situations. Al-
LIC2226
SECURITY SYSTEMS
2-32
Instruments and controls
CAUTION
The outlet and plug may be hot during
or immediately after use.
Only certain power outlets are designed
for use with a cigarette lighter unit. Do
not use any other power outlet for an
accessory lighter. It is recommended
you visit an INFINITI retailer for addi-
tional information.
Do not use with accessories that exceed
a 12 volt, 120W (10A) power draw.
Do not use double adapters or more
than one electrical accessory.
Use power outlets with the engine run-
ning to avoid discharging the vehicle
battery.
Avoid using power outlets when the air
conditioner, headlights or rear window
defroster is on.
Before
inserting
or
disconnecting
a
plug, be sure the electrical accessory
being used is turned OFF.
Push the plug in as far as it will go. If
good contact is not made, the plug may
overheat or the internal temperature
fuse may open.
When not in use, be sure to close the
cap. Do not allow water or any other
liquid to contact the outlet.
120V OUTLET (if so equipped)
CAUTION
The outlet and plug may be hot during
or immediately after use.
Use power outlets with the engine run-
ning to avoid discharging the vehicle
battery.
Do not use double adaptors or more
than one electrical accessory.
Cargo Area
LIC2236
2nd Row
LIC2215
2-50
Instruments and controls
Avoid using power outlets when the air
conditioner, headlights or rear window
defroster is on.
Before
inserting
or
disconnecting
a
plug, be sure the electrical accessory
being used is turned OFF.
Push the plug in as far as it will go. If
good contact is not made, the plug may
overheat or the internal temperature
fuse may open.
When not in use, be sure to close the
cap. Do not allow water or any other
liquid to contact the outlet.
LDI2758
OFF position
LIC3266
EXTENDED STORAGE SWITCH
Instruments and controls
2-51
The extended storage switch is pulled out when
in transit from the factory to the retailer. It is
located in the fuse panel to the left of the steering
wheel on the instrument panel. If any electrical
equipment does not operate, ensure the ex-
tended storage switch is pushed fully in place, as
shown.
MAP POCKETS
SEATBACK POCKETS
There is a seatback pocket located on the back of
the driver and passenger seats. The pockets can
be used to store maps.
WARNING
To ensure proper operation of the passen-
ger’s INFINITI Advanced Air Bag System,
please observe the following items:
Do not allow a passenger in the rear
seat to push or pull on the seatback
pocket or head restraint/head rest.
ON position
LIC3268
LIC2211
LIC1328
STORAGE
2-52
Instruments and controls
Restarting the entry/exit function
If the battery cable is disconnected, or if the fuse
opens, the stored memory positions will be lost
and some of the functions will be restricted:
1. Drive the vehicle over 25 mph (40 km/h).
OR
2. Open and close the driver’s door more than
two times with the ignition switch in the OFF
position.
The entry/exit function should now work properly.
SETTING MEMORY FUNCTION
The position of the following settings can be
linked to the Intelligent Key and the memorized
settings can be available for each Intelligent Key.
Climate control system
Navigation system (if so equipped)
Audio system
To use the memory function, set the climate,
navigation and audio systems to the driver’s pre-
ferred settings. Lock the doors with the Intelligent
Key. Each Intelligent Key may be set with the
driver’s individual preferences. When a new In-
telligent Key is used, “Connection with the key
has been done” will be displayed on the screen
and the memorized settings are available.
To engage the memorized settings, perform the
following:
1. Carry the Intelligent Key that is linked to the
memorized settings.
2. Unlock the doors by pushing the driver’s
door
handle
request
switch
or
the
UNLOCK
button on the Intelligent
Key.
3. Place the ignition switch in the ON position.
The settings linked to the Intelligent Key will
start.
For additional information on using the Climate
control system, refer to “Heater and air condi-
tioner (automatic)”in the “Monitor, climate, audio,
phone and voice recognition systems” section of
this manual.
For additional information on using the Naviga-
tion System, refer to the separate Navigation
System Owner’s Manual.
For additional information on using the Audio
system, refer to “Audio system” in the “Monitor,
climate, audio, phone and voice recognition sys-
tems” section of this manual.
SYSTEM OPERATION
The automatic drive positioner system will not
work or will stop operating under the following
conditions:
When the vehicle speed is above 4 mph
(7 km/h).
When any of the memory switches are
pushed while the automatic drive positioner
is operating.
When the adjusting switch for the driver’s
seat is turned on while the automatic drive
positioner is operating.
When the seat has already been moved to
the memorized position.
When no seat position is stored in the
memory switch.
When the shift lever is moved from P (Park)
to any other position.
3-36
Pre-driving checks and adjustments
SEEK•CAT/TRACK tuning
button
For AM or FM:
Press
the
SEEK•CAT/TRACK
button
or
to tune from high to low or low to high
frequencies and stop at the next broadcasting
station.
For XM:
Press
the
SEEK•CAT/TRACK
button
or
to go to the first channel of the previous
or next category.
During satellite radio reception, the following no-
tices will be displayed under certain conditions.
NO SIGNAL (No signal is received while the
SAT tuner is connected)
OFF AIR (Broadcasting signed off)
CHECK ANTENNA (Antenna connection
error)
LOADING (When the initial setting is per-
formed)
UPDATING (When the satellite radio sub-
scription is not active)
SCAN tuning
Press the SCAN button to stop at each broad-
casting station for 5 seconds. Pressing the
SCAN button again during this 5 second period
will stop scan tuning and the radio will remain
tuned to that station. If the SCAN button is not
pressed within 5 seconds, scan tuning moves to
the next station.
1 to 6 Station memory operations
Six stations can be set for the AM band. Twelve
stations can be set for the FM band (6 for FM1, 6
for FM2). Eighteen channels can be set for the
satellite radio (6 for XM1, 6 for XM2, 6 for XM3).
1. Choose the radio band AM, FM1 or FM2
using the FM·AM select button, or choose
the satellite band XM1, XM2 or XM3 using
the XM button.
2. Tune to the desired station using manual,
SEEK or SCAN tuning. Press and hold any
of the desired station memory buttons (1 –
6) until the preset number is updated on the
display and the sound is briefly muted.
3. The channel indicator will then come on and
the sound will resume. Programming is now
complete.
4. Other buttons can be set in the same man-
ner.
If the battery cable is disconnected, or if the fuse
opens, the radio memory will be canceled. In that
case, reset the desired stations.
List (AM and FM)
Select the “List” key using the INFINITI controller
or touch-screen to see a list of the presets in the
AM, FM1 or FM2 preset banks.
Text (SiriusXM® Satellite Radio) (models
without Navigation System)
Select the “Text” key with the INFINITI controller
and then press the ENTER button while the sat-
ellite radio is being played to display the text
information listed below:
CH Name
Category
Name
Title
Other
Monitor, climate, audio, phone and voice recognition systems
4-75
QR25DER engine
1.
Power steering fluid reservoir
2.
Engine coolant reservoir
3.
Drive belt location
4.
Fuse box
5.
Engine oil filler cap
6.
Inverter coolant reservoir
7.
Brake fluid reservoir
8.
Air cleaner
9.
Fuse/Fusible link box and remote posi-
tive battery terminal
10.
Fuse box
11
Fuse/Fusible link box
12.
Fuse/Fusible link box
13.
12-volt battery
14.
Engine oil dipstick
15.
Radiator cap
16.
Windshield-washer fluid reservoir
NOTE:
Hybrid system engine compartment cov-
er(s) removed for clarity.
LDI2514
ENGINE COMPARTMENT CHECK
LOCATIONS
Maintenance and do-it-yourself
8-7
Under some driving or climate conditions, occa-
sional brake squeak, squeal or other noise may
be heard. Occasional brake noise during light to
moderate stops is normal and does not affect the
function or performance of the brake system.
Proper brake inspection intervals should
be followed.
For additional information regard-
ing brake inspections, refer to the appropriate
maintenance
schedule
information
in
the
“INFINITI Service and Maintenance Guide”.
ENGINE COMPARTMENT
WARNING
Never use a fuse of higher or lower amper-
age rating than that specified on the fuse
box cover. This could damage the electri-
cal system or electronic control units or
cause a fire.
If any electrical equipment does not come on,
check for an open fuse.
1. Be sure the ignition switch and the headlight
switch are OFF.
2. Open the engine hood.
3. Remove the fuse box cover by pushing the
tab and lifting the cover up.
4. Remove the fuse with the fuse puller. The
fuse puller is located in the fuse block in the
passenger compartment.
LDI2267
FUSES
Maintenance and do-it-yourself
8-23
5. If the fuse is open
±
A
, replace it with a new
fuse
±
B
.
6. If a new fuse also opens, have the electrical
system checked and repaired. It is recom-
mended that you visit an INFINITI retailer for
this service.
Fusible links
If the electrical equipment does not operate and
fuses are in good condition, check the fusible
links. If any of these fusible links are melted,
replace with only Genuine NISSAN parts.
PASSENGER COMPARTMENT
WARNING
Never use a fuse of higher or lower amper-
age rating than that specified on the fuse box
cover. This could damage the electrical sys-
tem or electronic control units or cause a fire.
If any electrical equipment does not operate,
check for an open fuse.
1. Be sure the ignition switch and the headlight
switch are OFF.
2. Pull the fuse box cover to remove.
3. Remove the fuse with the fuse puller.
4. If the fuse is open
±
A
, replace it with an
equivalent good fuse
±
B
.
5. Push the fuse box cover to install.
6. If a new fuse also opens, have the electrical
system checked and repaired. It is recom-
mended that you visit an INFINITI retailer for
this service.
LDI0456
LDI2092
LDI0456
8-24
Maintenance and do-it-yourself
Wire color designation for electric trailer brake
controller jumper harness.
WIRE COLOR
NOTE
RED/GREEN
Vehicle stop lamp switch to
trailer brake controller.
BLACK
Brake controller ground (-).
BROWN/WHITE
Trailer brake controller
switched output.
RED/BLUE
Not used
RED
Fused trailer brake controller
battery feed (B+).
3. Peel off the tape and connect the jumper
harness to the connector.
4. Release the parking brake.
5. Install the aftermarket electric trailer brake
controller according to the manufacturer’s
instructions.
Pre-towing tips
Be certain your vehicle maintains a level
position when a loaded and/or unloaded
trailer is hitched. Do not drive the vehicle if it
has an abnormal nose-up or nose-down
condition; check for improper tongue load,
overload, worn suspension or other possible
causes of either condition.
Always secure items in the trailer to prevent
load shift while driving.
Keep the cargo load as low as possible in
the trailer to keep the trailer center of gravity
low.
Load the trailer so approximately 60% of the
trailer load is in the front half and 40% is in
the back half. Also make sure the load is
balanced side to side.
Check your hitch, trailer tire pressure, ve-
hicle tire pressure, trailer light operation, and
trailer wheel lug nuts every time you attach a
trailer to the vehicle.
Be certain your rearview mirrors conform to
all federal, state or local regulations. If not,
install any mirrors required for towing before
driving the vehicle.
Determine the overall height of the vehicle
and trailer so the required clearance is
known.
Trailer towing tips
In order to gain skill and an understanding of the
vehicle’s behavior, you should practice turning,
stopping and backing up in an area which is free
from traffic. Steering stability and braking perfor-
mance will be somewhat different than under
normal driving conditions.
Always secure items in the trailer to prevent
load shift while driving.
Lock the trailer hitch coupler with a pin or
lock to prevent the coupler from inadver-
tently becoming unlatched.
Avoid abrupt starts, acceleration or stops.
Avoid sharp turns or lane changes.
Always drive your vehicle at a moderate
speed.
When backing up, hold the bottom of the
steering wheel with one hand. Move your
hand in the direction in which you want the
trailer to go. Make small corrections and
back up slowly. If possible, have someone
guide you when you are backing up.
Always block the wheels on both vehicle and
trailer when parking. Parking on a slope is not
recommended; however, if you must do so:
CAUTION
If you move the shift selector to the P
(Park)
position
before
blocking
the
wheels and applying the parking brake,
transmission damage could occur.
1. Apply and hold the brake pedal.
2. Have someone place blocks on the downhill
side of the vehicle and trailer wheels.
9-26
Technical and consumer information