Infiniti QX80/QX - 2013 Fuse Box Diagram

Infiniti QX80/QX - 2013 Fuse Box Diagram

0-10
Illustrated table of contents
SSI0733
1.
Side ventilator (P.4-38)
2.
Meters and gauges (P.2-6)
3.
Hazard warning flasher switch (P.6-2)
4.
Center ventilator (P.4-38)
5.
Center multi-function control panel
(P.4-3)
Vehicle
information
and
setting
buttons (P.4-7)
6.
Center display
Around View Monitor (P.4-21)
Navigation system**
DVD player operation (P.4-64)
7.
Clock (P.2-51)
8.
Defroster switch (P.2-37)
9.
Front passenger supplemental air bag
(P.1-55)
10. Fuse box (P.8-24)
11. Parking brake (P.5-21)
12. Hood release handle (P.3-20)
13. Steering wheel
Horn (P.2-45)
Driver supplemental air bag
(P.1-55)
Power steering system (P.5-110)
14. Push-button ignition switch (P.5-11)
15. Climate controlled seat switch*
(P.2-47)/Heated seat switch* (P.2-45)
16. Remote tip-up 2nd row seat switch*
(P.1-9)
17. Heated steering wheel switch (P.2-44)
18. Power outlet (P.2-52)
19. Front passenger air bag status light
(P.1-63)
20. Cup holder (P.2-54)
21. Automatic climate control system
(P.4-39)
22. Audio system (P.4-47)
23. Glove box (P.2-57)
*: if so equipped
INSTRUMENT PANEL
0-12
Illustrated table of contents
SDI2585
VK56VD ENGINE
1.
Window washer fluid reservoir
(P.8-15)
2.
Fuse/fusible link holder (P.8-23)
3.
Engine oil dipstick (P.8-10)
4.
Power steering fluid reservoir (P.8-13)
5.
Engine oil filler cap (P.8-10)
6.
Brake fluid reservoir (P.8-14)
7.
Fuse/fusible link holder (P.8-23)
8.
Battery (P.8-16)
9.
Radiator filler cap (P.8-8)
10. Engine coolant reservoir (P.8-8)
11. Drive belts (P.8-18)
12. Air cleaner (P.8-19)
ENGINE COMPARTMENT
SSI0733
1.
Side ventilator
2.
Meters and gauges
3.
Hazard indicator flasher switch
4.
Center ventilator
5.
Center multi-function control panel
Vehicle
information
and
setting
buttons
6.
Center display
Around View Monitor
Navigation system**
DVD player operation
7.
Clock
8.
Defroster switch
9.
Front passenger supplemental air bag
10. Fuse box
11. Parking brake
12. Hood release handle
13. Steering wheel
Horn
Driver supplemental air bag
Power steering system
14. Push-button ignition switch
15. Climate
controlled
seat
switch*/
Heated seat switch*
16. Remote tip-up 2nd row seat switch*
17. Heated steering wheel switch
18. Power outlet
19. Front passenger air bag status light
20. Cup holder
21. Automatic air conditioning system
22. Audio system
23. Glove box
*: if so equipped
**:
Refer
to
the
separate
Navigation
System Owner
s Manual.
Instruments and controls
2-5
INSTRUMENT PANEL
.
Replacing tires with those not originally
specified by INFINITI could affect the
proper operation of the TPMS.
CAUTION
.
The TPMS is not a substitute for the
regular tire pressure check. Be sure to
check the tire pressure regularly.
.
If the vehicle is being driven at speeds of
less than 16 MPH (25 km/h), the TPMS
may not operate correctly.
.
Be sure to install the specified size of
tires to the four wheels correctly.
Master warning light
When the ignition switch is in the ON
position, the master warning light illumi-
nates if any of the following are displayed
on the dot matrix liquid crystal display:
.
No key warning
.
Low fuel warning
.
Low washer fluid warning
.
Parking brake release warning
.
Door/lift gate open warning
.
Loose fuel cap warning
.
Check tire pressure warning
.
Back-up Collision Intervention (BCI) not
available warning (if so equipped)
.
Back-up
Collision
Intervention
(BCI)
malfunction warning (if so equipped)
.
Extended storage fuse warning (if so
equipped)
See
Dot matrix liquid crystal display
later
in this section.
Preview Function warning light
(orange; if so equipped)
The light comes on if there is a malfunction
in the Brake Assist (with Preview Function)
system.
If the warning light comes on, park the
vehicle in a safe place. Turn the engine off,
restart the engine, then resume driving.
If it is not possible to set the system or the
indicator stays on, it may indicate that the
system is malfunctioning. Although the
vehicle
is
still
driveable
under
normal
conditions, have the vehicle checked at
an INFINITI retailer.
Seat belt warning light and
chime
The light and chime remind you to fasten
seat belts. The light illuminates whenever
the ignition switch is pushed to the ON
position, and will remain illuminated until
the driver
s seat belt is fastened. At the
same time, the chime will sound for about
6 seconds unless the driver
s seat belt is
securely fastened.
The seat belt warning light for the front
passenger will illuminate if the seat belt is
not fastened when the front passenger
s
seat
is
occupied.
For
approximately
5
seconds after the ignition switch is in the
ON position, the system does not activate
the warning light for the front passenger.
See
Seat belts
in the
1. Safety
seats,
seat
belts
and
supplemental
restraint
system
section for precautions on seat
belt usage.
Supplemental air bag warning
light
After pushing the ignition switch to the ON
position, the supplemental air bag warning
light will illuminate. The supplemental air
bag warning light will turn off after about 7
seconds if the front-impact air bag and
Instruments and controls
2-17
For
more
details,
see
Remote
keyless
entry system
in the
3. Pre-driving checks
and adjustments
section.
8. Parking brake release warning
This warning appears when the vehicle
speed is above 4 MPH (7 km/h) and the
parking brake is applied.
9. Low fuel warning
This warning appears when the fuel level in
the tank is getting low. Refuel as soon as it
is convenient, preferably before the fuel
gauge reaches the 0 (Empty) position.
There is a small reserve of fuel remaining
in the tank when the fuel gauge reaches
the 0 (Empty) position.
10. Low washer fluid warning
This warning appears when the washer
tank fluid is at a low level. Add washer fluid
as necessary. (See
Window washer fluid
in the
8. Maintenance and do-it-yourself
section.)
11. Door/lift gate open warning
(ignition switch is in the ON posi-
tion)
This warning appears if any of the doors
and/or the lift gate are open or not closed
securely. The vehicle icon indicates which
door or the lift gate is open on the display.
12. Loose fuel cap warning
This warning appears when the fuel-filler
cap is not tightened correctly after the
vehicle has been refueled. (See
Fuel-filler
cap
in the
3. Pre-driving checks and
adjustments
section.)
13. Check tire pressure warning
This warning appears when the low tire
pressure warning light in the meter illumi-
nates and low tire pressure is detected.
The warning appears each time the ignition
switch is placed in the ON position as long
as
the
low
tire
pressure
warning
light
remains illuminated. If this warning ap-
pears, stop the vehicle and adjust the tire
pressure to the recommended COLD tire
pressure shown on the Tire and Loading
Information label. (See
Low tire pressure
warning light
earlier in this section and
Tire Pressure Monitoring System (TPMS)
in the
5. Starting and driving
section.)
14. Extended storage fuse warning
(if so equipped)
This warning may appear if the extended
storage
fuse
switch
is
not
pushed
in
(switched on). When this warning appears,
push in (switch on) the extended storage
fuse switch to turn off the warning. For
more information, see
Extended storage
fuse switch
in the
8. Maintenance and
do-it-yourself
section.
15. Back-up Collision Intervention
(BCI) not available warning (if so
equipped)
This warning appears when the Back-up
Collision Intervention (BCI) system is tem-
porarily not available.
For more details, see
Blind Spot Warning/
Blind
Spot
Intervention
TM
/Back-up
Colli-
sion
Intervention
systems
in
the
5.
Starting and driving
section.
16. Back-up Collision Intervention
(BCI) malfunction warning (if so
equipped)
This warning appears when the Back-up
Collision Intervention (BCI) system is not
functioning properly.
For more details, see
Blind Spot Warning/
Blind
Spot
Intervention
TM
/Back-up
Colli-
sion
Intervention
systems
in
the
5.
Starting and driving
section.
Instruments and controls
2-25
Type A
The power outlet is used for powering
electrical
accessories
such
as
cellular
telephones.
CAUTION
.
The outlet and plug may be hot during or
immediately after use.
.
Do not use with accessories that exceed
a combined power draw of 12 volts,
120W (10A) for all the power outlets. Do
not use double adapters or more than
one electrical accessory.
.
This power outlet is not designed for use
with a cigarette lighter unit.
.
Push the plug in as far as it will go. If
good contact is not made, the plug may
overheat
or
the
internal
temperature
fuse may blow.
SIC2648
Main switch
Type B (if so equipped)
The power outlet (plug type) is located on
the back side of the front console. It can
operate when the ignition switch in the ON
position and the main switch (located in
the console box) is ON.
The specification of this power outlet is for
use of a 120 volt, 150W (1.25A) power
draw.
To turn on or off the power supply to the
outlet, push the ON
*
1
or OFF
*
2
side of
the main switch. When the switch is turned
to the ON position, the indicator light
*
A
will illuminate.
SIC4451
Power outlet
Pull up the cover and plug in.
After using the power outlet, be sure to
turn off the main switch.
CAUTION
.
Do not use with accessories that exceed
a 120 volt, 150W (1.25A) power draw.
.
Use this power outlet with the engine
running. (If the engine is stopped, this
could result in a discharged battery.)
Instruments and controls
2-53
SPA2756
SET/memory switches
The automatic drive positioner system has
three features:
.
Entry/exit function
.
Memory storage
.
Setting memory function
ENTRY/EXIT FUNCTION
This system is designed so that the driver
s
seat and steering column will automati-
cally move when the automatic transmis-
sion shift lever is in the P (Park) position.
This allows the driver to get into and out of
the driver
s seat more easily.
The driver
s seat will slide backward and
the steering wheel will move up when the
driver
s door is opened with the ignition
switch in the LOCK position.
The driver
s seat and steering wheel will
return to the previous positions when the
ignition
switch
is
pushed
to
the
ACC
position.
The driver
s seat will not return to the
previous positions if the seat or steering
adjusting switch is operated when the seat
is at the exit position.
Cancel or activate entry/exit func-
tion
The shift lever must be in the P (Park)
position with the ignition switch in the OFF
position.
The entry/exit function can be activated or
canceled by pressing and holding the SET
switch for more than 10 seconds.
The
indicator
lights
on
the
memory
switches (1 and 2) will blink once when
the function is canceled, and the indicator
lights will blink twice when the function is
activated. Note that the indicator lights
may
illuminate
after
5
seconds
while
holding
the
SET switch. This
indicates
readiness for linking the Intelligent Key to
a stored memory position. Keep the SET
switch pressed for more than 10 seconds
to turn on or off the entry/exit function.
The entry/exit function can also be acti-
vated
or
canceled
if
the
Lift
Steering
Wheel on Exit
key or
Slide Driver Seat
Back on Exit
key is turned to ON or OFF in
the
Comfort
settings.
(See
Vehicle
information
and
settings
in
the
4.
Monitor, climate, audio, phone and voice
recognition systems
section.)
Initialize entry/exit function
If the battery cable is disconnected, or if
the fuse opens, the entry/exit function will
not work though this function was set on
before. In such a case, after connecting the
battery or replacing with a new fuse, open
and close the driver
s door more than two
times after the ignition switch is turned
from the ON position to the LOCK position.
The entry/exit function will be activated.
Pre-driving checks and adjustments
3-33
AUTOMATIC DRIVE POSITIONER
3-34
Pre-driving checks and adjustments
MEMORY STORAGE
Two positions for the driver
s seat, steering
column and outside mirrors can be stored
in the automatic drive positioner memory.
Follow these procedures to use the mem-
ory system.
1.
Move the shift lever to the P (Park)
position.
2.
Push the ignition switch to the ON
position.
3.
Adjust the driver
s seat, steering col-
umn and outside mirrors to the desired
positions by manually operating each
adjusting switch. For additional infor-
mation, see
Seats
in the
1. Safety
seats,
seat
belts
and
supplemental
restraint
system
section
and
Tilt/
telescopic
steering
earlier
in
this
section and
Outside mirrors
earlier
in this section.
4.
Push
the
SET switch
and,
within
5
seconds, push the memory switch (1
or 2) fully for at least 1 second.
The
indicator
light
for
the
pushed
memory switch will stay on for approxi-
mately 5 seconds after pushing the
switch.
If
memory
is
stored
in
the
same
memory switch, the previous memory
will be deleted.
Linking Intelligent Key to a stored
memory position
The Intelligent Key can be linked to a
stored memory position with the following
procedure.
1.
Follow the steps for storing a memory
position.
2.
While the indicator light for the memory
switch being set is illuminated for 5
seconds, push the
button on the
Intelligent Key. If the indicator light
blinks, the Intelligent Key is linked to
that memory setting.
Push the ignition switch to the OFF posi-
tion, and then push the
button on the
Intelligent Key. The driver
s seat, steering
wheel and outside mirrors will move to the
memorized position.
Confirming memory storage
.
Push
the
ignition
switch
to
the
ON
position and push the SET switch. If
the main memory has not been stored,
the indicator light will come on for
approximately 0.5 second. When the
memory
has stored in position, the
indicator light will stay on for approxi-
mately 5 seconds.
.
If the battery cable is disconnected, or if
the fuse opens, the memory will be
canceled. In this case, reset the desired
position using the previous procedure.
.
If optional Intelligent Keys are added to
your vehicle, the memory storage pro-
cedure to switch 1 or 2 and linking
Intelligent Key procedure to a stored
memory position should be performed
again
for
each
Intelligent
Key.
For
additional Intelligent Key information,
see
Keys
earlier in this section.
Selecting the memorized position
1.
Move the shift lever to the P (Park)
position.
2.
Use one of the following methods to
move
the
driver
s
seat,
the
outside
mirrors and the steering wheel.
.
Push the ignition switch to the ON
position
and
push
the
memory
switch (1 or 2) fully for at least 1
second.
.
Within 45 seconds of opening the
driver
s
door,
push
the
memory
switch (1 or 2) fully for at least 1
second.
4-62
Monitor, climate, audio, phone and voice recognition systems
SEEK tuning:
.
For AM and FM radio
Push the SEEK·CAT or TRACK button
or
to tune from low to high or high
to low frequencies and to stop at the
next broadcasting station.
.
For SiriusXM Satellite Radio
Push the SEEK·CAT or TRACK button
or
to tune to the first channel of the
next or previous category.
During satellite radio reception, the follow-
ing notices will be displayed under certain
conditions.
.
NO SIGNAL (No signal is received while
the SAT tuner is connected.)
.
OFF AIR (Broadcasting signed off)
.
CHECK ANTENNA (Antenna connection
error)
.
LOADING (When the initial setting is
performed)
.
UPDATING
(When
the
satellite
radio
subscription is not active)
.
INVALID
CH
(Invalid
channel
is
re-
ceived.)
SCAN tuning:
Push the SCAN tuning button to tune from
low to high frequencies and stop at each
broadcasting station/channel for
5 sec-
onds. Pushing the button again during this
10 seconds period will stop SCAN tuning
and the radio will remain tuned to that
station/channel.
If the SCAN tuning button is not pushed
within 5 seconds, SCAN tuning moves to
the next station/channel.
*
1
to
*
6
Station memory operations:
12 stations/channels can be set for the FM
band (6 each for FM1 and FM2), 18 for
SiriusXM Satellite Radio (6 each for XM1,
XM2 and XM3) and 6 stations can be set
for the AM band.
1.
Choose the radio band using the radio
band select button.
2.
Tune
to
the
desired
station/channel
using
the
SEEK·CAT,
TRACK,
SCAN
button or the radio TUNE knob.
3.
Push
and
hold
the
desired
station
preset button
*
1
to
*
6
until the radio
mutes.
4.
The station indicator will then come on
and the sound will resume. Memorizing
is now complete.
5.
Other buttons can be set in the same
manner.
If the battery cable is disconnected, or if
the fuse opens, the radio memory will be
erased. In that case, reset the desired
stations/channels.
Menu (SiriusXM Satellite Radio):
When the
Menu
key on the display is
selected while the SiriusXM Satellite Radio
is being played, the menu list will be
displayed.
The following items are available.
.
Preset List
Displays the preset channel list. If 1 of
the 6 preset stations listed is touched
and held, the current station will be
stored as the new preset.
.
Customize Channel List
Selects specific channels to skip while
using the TUNE, SEEK·CAT or Menu-
Categories feature.
.
Favorite Artists & Songs
Stores the current artist or song that is
being played. Touch the
Alert
key to
be reminded when the stored artist or
song
is
playing
on
a
station
while
listening to SiriusXM Satellite Radio.
.
Categories
SDI2585
VK56VD ENGINE MODEL
1.
Window washer fluid reservoir
2.
Fuse/fusible link holder
3.
Engine oil dipstick
4.
Power steering fluid reservoir
5.
Engine oil filler cap
6.
Brake fluid reservoir
7.
Fuse/fusible link holder
8.
Battery
9.
Radiator filler cap
10. Engine coolant reservoir
11. Drive belts
12. Air cleaner
Maintenance and do-it-yourself
8-7
ENGINE COMPARTMENT CHECK LOCATIONS
several times. The pedal travel distance
will decrease gradually with each de-
pression
as
the
hydraulic
pressure
decreases.
If the brakes do not operate properly, have
the brakes checked by an INFINITI retailer.
SDI2518
SDI2532
ENGINE COMPARTMENT
CAUTION
Never
use
a
fuse
of
a
higher
or
lower
amperage rating than that specified on the
fuse
box
cover. This
could
damage
the
electrical system or cause a fire.
If
any
electrical
equipment
does
not
operate, check for an open fuse.
1.
Be sure the ignition switch is pushed to
the
OFF
or
LOCK
position
and
the
headlight switch is turned to OFF.
2.
Open the engine hood and remove the
cover on the battery.
3.
Remove
the
fuse/fusible
link
holder
cover
*
1
,
*
2
or
*
3
.
4.
Remove the fuse with the fuse puller.
Maintenance and do-it-yourself
8-23
FUSES
8-24
Maintenance and do-it-yourself
SDI1754
5.
If the fuse is open
*
A
, replace it with a
new fuse
*
B
. Spare fuses are stored in
the passenger compartment fuse box.
6.
If a new fuse also opens, have the
electrical system checked and repaired
by an INFINITI retailer.
Fusible links
If
any
electrical
equipment
does
not
operate and fuses are in good condition,
check the fusible links. If any of these
fusible links are melted, replace only with
genuine INFINITI parts.
JVM0200X
PASSENGER COMPARTMENT
CAUTION
Never
use
a
fuse
of
a
higher
or
lower
amperage rating than that specified on the
fuse
box
cover. This
could
damage
the
electrical system or cause a fire.
If
any
electrical
equipment
does
not
operate, check for an open fuse.
1.
Be sure the ignition switch is pushed to
the
OFF
or
LOCK
position
and
the
headlight switch is turned to OFF.
2.
Open the fuse box lid.
3.
Remove the fuse with the fuse puller
*
A
.
4.
If the fuse is open, replace it with a new
fuse.
5.
If a new fuse also opens, have the
electrical system checked and repaired
by an INFINITI retailer. Spare fuses are
stored in the fuse box.
SDI2704
Extended storage fuse switch (if so
equipped)
To
reduce
battery
drain,
the
extended
storage fuse switch comes from the factory
switched
off.
Prior
to
delivery
of
your
vehicle, the switch is pushed in (switched
on) and should always remain on.
If the extended storage fuse switch is not
pushed in (switched on), the
SHIPPING
MODE ON, PUSH STORAGE FUSE
warning
may appear on the dot matrix liquid crystal
display (if so equipped). See
Dot matrix
liquid crystal display
in the
2. Instru-
ments and controls
section.
If
any
electrical
equipment
does
not
operate, remove the extended storage fuse
switch and check for an open fuse.
NOTE:
If the extended storage fuse switch mal-
functions or if the fuse is open, it is not
necessary to replace the switch. In this
case, remove the extended storage fuse
switch and replace it with a new fuse of
the same rating.
How to remove the extended storage fuse
switch:
1.
To remove the extended storage fuse
switch, be sure the ignition switch is in
the OFF or LOCK position.
2.
Be sure the headlight switch is in the
OFF position.
3.
Remove the fuse box cover.
4.
Pinch the locking tabs
*
1
found on
each side of the storage fuse switch.
5.
Pull the storage fuse switch straight out
from the fuse box
*
2
.
CAUTION
Be careful not to allow children to swallow
the battery and removed parts.
Maintenance and do-it-yourself
8-25
INTELLIGENT KEY BATTERY REPLACEMENT