Infiniti QX80/QX - 2012 Fuse Box Diagram

Infiniti QX80/QX - 2012 Fuse Box Diagram

SSI0733
1.
Side ventilator (P.4-32)
2.
Meters and gauges (P.2-6)
3.
Hazard warning flasher switch (P.2-43)
4.
Center ventilator (P.4-32)
5.
Center multi-function control panel
(P.4-4)
Vehicle
information
and
setting
buttons (P.4-8)
6.
Center display
Around View Monitor (P.4-21)
Navigation system**
DVD player operation (P.4-56)
7.
Clock (P.2-51)
8.
Defroster
switch
(P.2-36)/Deicer
switch* (P.2-36)
9.
Front passenger supplemental air bag
(P.1-54)
10. Fuse box (P.8-24)
11. Parking brake (P.5-20)
12. Hood release handle (P.3-18)
13. Steering wheel
Horn (P.2-45)
Driver supplemental air bag
(P.1-54)
Power steering system (P.5-101)
14. Push-button ignition switch (P.5-11)
15. Climate controlled seat switch*
(P.2-47)/Heated seat switch* (P.2-45)
16. Remote tip-up 2nd row seat switch*
(P.1-9)
17. Heated steering wheel switch (P.2-44)
18. Power outlet (P.2-52)
19. Front passenger air bag status light
(P.1-62)
20. Cup holder (P.2-54)
21. Automatic climate control system
(P.4-33)
22. Audio system (P.4-41)
23. Glove box (P.2-57)
Illustrated table of contents
0-9
INSTRUMENT PANEL
SDI2585
VK56VD ENGINE
1.
Window washer fluid reservoir
(P.8-15)
2.
Fuse/fusible link holder (P.8-22)
3.
Engine oil dipstick (P.8-10)
4.
Power steering fluid reservoir (P.8-13)
5.
Engine oil filler cap (P.8-10)
6.
Brake fluid reservoir (P.8-14)
7.
Fuse/fusible link holder (P.8-22)
8.
Battery (P.8-16)
9.
Radiator filler cap (P.8-8)
10. Engine coolant reservoir (P.8-8)
11. Drive belts (P.8-18)
12. Air cleaner (P.8-19)
Illustrated table of contents
0-11
ENGINE COMPARTMENT
SSI0733
1.
Side ventilator
2.
Meters and gauges
3.
Hazard indicator flasher switch
4.
Center ventilator
5.
Center multi-function control panel
Vehicle
information
and
setting
buttons
6.
Center display
Around View Monitor
Navigation system**
DVD player operation
7.
Clock
8.
Defroster switch/Deicer switch*
9.
Front passenger supplemental air bag
10. Fuse box
11. Parking brake
12. Hood release handle
13. Steering wheel
Horn
Driver supplemental air bag
Power steering system
14. Push-button ignition switch
15. Climate
controlled
seat
switch*/
Heated seat switch*
16. Remote tip-up 2nd row seat switch*
17. Heated steering wheel switch
18. Power outlet
19. Front passenger air bag status light
20. Cup holder
21. Automatic air conditioning system
22. Audio system
23. Glove box
*: if so equipped
**:
Refer
to
the
separate
Navigation
System Owner
s Manual.
Instruments and controls
2-5
INSTRUMENT PANEL
Type A
The power outlet is used for powering
electrical
accessories
such
as
cellular
telephones.
CAUTION
.
The outlet and plug may be hot during or
immediately after use.
.
Do not use with accessories that exceed
a combined power draw of 12 volts,
120W (10A) for all the power outlets. Do
not use double adapters or more than
one electrical accessory.
.
This power outlet is not designed for use
with a cigarette lighter unit.
.
Push the plug in as far as it will go. If
good contact is not made, the plug may
overheat
or
the
internal
temperature
fuse may blow.
SIC2648
Main switch
Type B (if so equipped)
The power outlet (plug type) is located on
the back side of the front console. It can
operate when the ignition switch in the ON
position and the main switch (located in
the console box) is ON.
The specification of this power outlet is for
use of a 120 volt, 150W (1.25A) power
draw.
To turn on or off the power supply to the
outlet, push the ON
*
1
or OFF
*
2
side of
the main switch. When the switch is turned
to the ON position, the indicator light
*
A
will illuminate.
SIC4451
Power outlet
Pull up the cover and plug in.
After using the power outlet, be sure to
turn off the main switch.
CAUTION
.
Do not use with accessories that exceed
a 120 volt, 150W (1.25A) power draw.
.
Use this power outlet with the engine
running. (If the engine is stopped, this
could result in a discharged battery.)
Instruments and controls
2-53
switch pressed for more than 10 seconds
to turn on or off the entry/exit function.
The entry/exit function can also be acti-
vated
or
canceled
if
the
Lift
Steering
Wheel on Exit
key or
Slide Driver Seat
Back on Exit
key is turned to ON or OFF in
the
Comfort
settings.
(See
Vehicle
information
and
settings
in
the
4.
Monitor, climate, audio, phone and voice
recognition systems
section.)
Initialize entry/exit function
If the battery cable is disconnected, or if
the fuse opens, the entry/exit function will
not work though this function was set on
before. In such a case, after connecting the
battery or replacing with a new fuse, open
and close the driver
s door more than two
times after the ignition switch is turned
from the ON position to the LOCK position.
The entry/exit function will be activated.
MEMORY STORAGE
Two positions for the driver
s seat, steering
column and outside mirrors can be stored
in the automatic drive positioner memory.
Follow these procedures to use the mem-
ory system.
1.
Move the selector lever to the P (Park)
position.
2.
Push the ignition switch to the ON
position.
3.
Adjust the driver
s seat, steering col-
umn and outside mirrors to the desired
positions by manually operating each
adjusting switch. For additional infor-
mation, see
Seats
in the
1. Safety
seats,
seat
belts
and
supplemental
restraint
system
section
and
Tilt/
telescopic
steering
earlier
in
this
section and
Outside mirrors
earlier
in this section.
4.
Push
the
SET switch
and,
within
5
seconds, push the memory switch (1
or 2) fully for at least 1 second.
The
indicator
light
for
the
pushed
memory switch will stay on for approxi-
mately 5 seconds after pushing the
switch.
If
memory
is
stored
in
the
same
memory switch, the previous memory
will be deleted.
Linking Intelligent Key to a stored
memory position
The Intelligent Key can be linked to a
stored memory position with the following
procedure.
1.
Follow the steps for storing a memory
position.
2.
While the indicator light for the memory
switch being set is illuminated for 5
seconds, push the
button on the
Intelligent Key. If the indicator light
blinks, the Intelligent Key is linked to
that memory setting.
Push the ignition switch to the OFF posi-
tion, and then push the
button on the
Intelligent Key. The driver
s seat, steering
wheel and outside mirrors will move to the
memorized position.
Confirming memory storage
.
Push
the
ignition
switch
to
the
ON
position and push the SET switch. If
the main memory has not been stored,
the indicator light will come on for
approximately 0.5 second. When the
memory
has stored in position, the
Pre-driving checks and adjustments
3-31
3-32
Pre-driving checks and adjustments
indicator light will stay on for approxi-
mately 5 seconds.
.
If the battery cable is disconnected, or if
the fuse opens, the memory will be
canceled. In this case, reset the desired
position using the previous procedure.
.
If optional Intelligent Keys are added to
your vehicle, the memory storage pro-
cedure to switch 1 or 2 and linking
Intelligent Key procedure to a stored
memory position should be performed
again
for
each
Intelligent
Key.
For
additional Intelligent Key information,
see
Keys
earlier in this section.
Selecting the memorized position
1.
Move the selector lever to the P (Park)
position.
2.
Use one of the following methods to
move
the
driver
s
seat,
the
outside
mirrors and the steering wheel.
.
Push the ignition switch to the ON
position
and
push
the
memory
switch (1 or 2) fully for at least 1
second.
.
Within 45 seconds of opening the
driver
s
door,
push
the
memory
switch (1 or 2) fully for at least 1
second.
The driver
s seat, steering column and
outside mirrors will move to the mem-
orized position or to the exit position
when the entry/exit function is set to
active with the indicator light flashing,
and then the light will
stay on for
approximately 5 seconds.
SETTING MEMORY FUNCTION
The status of the following settings can be
linked
to
the
Intelligent
Key
and
the
memorized settings can be available for
each Intelligent Key.
.
Air conditioner system
.
Navigation system
.
Audio system
To use the memory function, lock the doors
with the Intelligent Key that is linked to the
settings.
To enable the memorized settings:
1.
Carry the Intelligent Key that is linked
to the settings, and unlock the doors by
pushing the driver
s door handle re-
quest switch or
UNLOCK
button
on the Intelligent Key.
2.
Push the ignition switch to the
ON
position.
Connection with the key has
been done
will be displayed on the
screen and the memorized settings are
available (only when a new Intelligent
Key is used).
SYSTEM OPERATION
The automatic drive positioner system will
not work or will stop operating under the
following conditions:
.
When the vehicle speed is above 4 MPH
(7 km/h).
.
When
the
adjusting
switch
for
the
driver
s seat and steering column is
turned on while the automatic drive
positioner is operating.
.
When the memory switch 1 or 2 is not
pushed for at least 1 second.
.
When the seat, steering column and
outside
mirrors
have
already
been
moved to the memorized position.
.
When
no
position
is
stored
in
the
memory switch.
.
When
the
engine
is
started
while
moving the automatic drive positioner.
.
When the AT selector lever is moved
from the P (Park) position to any other
position.
(However,
it
will
not
be
canceled if the switch is pushed while
the
seat
and
steering
column
are
returning
to
the
previous
positions
4-54
Monitor, climate, audio, phone and voice recognition systems
SEEK tuning:
.
For AM and FM radio
Push the SEEK·CAT or TRACK button
or
to tune from low to high or high
to low frequencies and to stop at the
next broadcasting station.
.
For XM Satellite Radio
Push the SEEK·CAT or TRACK button
or
to tune to the first channel of the
next or previous category.
During satellite radio reception, the follow-
ing notices will be displayed under certain
conditions.
.
NO SIGNAL (No signal is received while
the SAT tuner is connected.)
.
OFF AIR (Broadcasting signed off)
.
CHECK ANTENNA (Antenna connection
error)
.
LOADING (When the initial setting is
performed)
.
UPDATING
(When
the
satellite
radio
subscription is not active)
.
INVALID
CH
(Invalid
channel
is
re-
ceived.)
SCAN tuning:
Push the SCAN tuning button to tune from
low to high frequencies and stop at each
broadcasting station/channel for
5 sec-
onds. Pushing the button again during this
10 seconds period will stop SCAN tuning
and the radio will remain tuned to that
station/channel.
If the SCAN tuning button is not pushed
within 5 seconds, SCAN tuning moves to
the next station/channel.
*
1
to
*
6
Station memory operations:
12 stations/channels can be set for the FM
band (6 each for FM1 and FM2), 18 for XM
radio (6 each for XM1, XM2 and XM3) and 6
stations can be set for the AM band.
1.
Choose the radio band using the radio
band select button.
2.
Tune
to
the
desired
station/channel
using
the
SEEK·CAT,
TRACK,
SCAN
button or the radio TUNE knob.
3.
Push
and
hold
the
desired
station
preset button
*
1
to
*
6
until the radio
mutes.
4.
The station indicator will then come on
and the sound will resume. Memorizing
is now complete.
5.
Other buttons can be set in the same
manner.
If the battery cable is disconnected, or if
the fuse opens, the radio memory will be
erased. In that case, reset the desired
stations/channels.
Menu (XM Satellite Radio):
When the
Menu
key on the display is
selected while the XM Satellite Radio is
being
played,
the
menu
list
will
be
displayed.
The following items are available.
.
Preset List
Displays the preset channel list. If 1 of
the 6 preset stations listed is touched
and held, the current station will be
stored as the new preset.
.
Customize Channel List
Selects specific channels to skip while
using the TUNE, SEEK·CAT or Menu-
Categories feature.
.
Favorite Artists & Songs
Stores the current artist or song that is
being played. Touch the
Alert
key to
be reminded when the stored artist or
song
is
playing
on
a
station
while
listening to XM.
.
Categories
Selecting a category will go to the first
channel in that category as defined by
SDI2585
VK56VD ENGINE MODEL
1.
Window washer fluid reservoir
2.
Fuse/fusible link holder
3.
Engine oil dipstick
4.
Power steering fluid reservoir
5.
Engine oil filler cap
6.
Brake fluid reservoir
7.
Fuse/fusible link holder
8.
Battery
9.
Radiator filler cap
10. Engine coolant reservoir
11. Drive belts
12. Air cleaner
Maintenance and do-it-yourself
8-7
ENGINE COMPARTMENT CHECK LOCATIONS
ENGINE COMPARTMENT
CAUTION
Never
use
a
fuse
of
a
higher
or
lower
amperage rating than that specified on the
fuse
box
cover. This
could
damage
the
electrical system or cause a fire.
If
any
electrical
equipment
does
not
operate, check for an open fuse.
1.
Be sure the ignition switch is pushed to
the
OFF
or
LOCK
position
and
the
headlight switch is turned to OFF.
2.
Open the engine hood and remove the
cover on the battery.
3.
Remove
the
fuse/fusible
link
holder
cover
*
1
,
*
2
or
*
3
.
4.
Remove the fuse with the fuse puller.
SDI1754
5.
If the fuse is open
*
A
, replace it with a
new fuse
*
B
. Spare fuses are stored in
the passenger compartment fuse box.
6.
If a new fuse also opens, have the
electrical system checked and repaired
by an INFINITI retailer.
Fusible links
If
any
electrical
equipment
does
not
operate and fuses are in good condition,
check the fusible links. If any of these
fusible links are melted, replace only with
genuine INFINITI parts.
Maintenance and do-it-yourself
8-23
8-24
Maintenance and do-it-yourself
SDI2519
PASSENGER COMPARTMENT
CAUTION
Never
use
a
fuse
of
a
higher
or
lower
amperage rating than that specified on the
fuse
box
cover. This
could
damage
the
electrical system or cause a fire.
If
any
electrical
equipment
does
not
operate, check for an open fuse.
1.
Be sure the ignition switch is pushed to
the
OFF
or
LOCK
position
and
the
headlight switch is turned to OFF.
2.
Open the fuse box lid.
3.
Remove the fuse with the fuse puller
*
A
.
4.
If the fuse is open, replace it with a new
fuse.
5.
If a new fuse also opens, have the
electrical system checked and repaired
by an INFINITI retailer. Spare fuses are
stored in the fuse box.
SDI2704
Extended storage switch (if so
equipped)
To
reduce
battery
drain,
the
extended
storage
switch
comes
from
the
factory
switched
off.
Prior
to
delivery
of
your
vehicle, the switch is pushed in (switched
on) and should always remain on.
If
any
electrical
equipment
does
not
operate,
remove
the
extended
storage
switch and check for an open fuse.
NOTE:
If the extended storage switch malfunc-
tions or if the fuse is open, it is not
necessary to replace the switch. In this
case, remove the extended storage switch
and replace it with a new fuse of the same
rating.
How to remove the extended storage
switch:
1.
To remove the extended storage switch,
be sure the ignition switch is in the OFF
or LOCK position.
2.
Be sure the headlight switch is in the
OFF position.
3.
Remove the fuse box cover.
4.
Pinch the locking tabs
*
1
found on
each side of the storage switch.
5.
Pull
the
storage
switch
straight
out
from the fuse box
*
2
.
CAUTION
Be careful not to allow children to swallow
the battery and removed parts.
SDI2451
Replace the battery as follows:
1.
Release the lock knob at the back of the
Intelligent Key and remove the mechan-
ical key.
2.
Insert a small screwdriver into the slit
of the corner and twist it to separate
the upper part from the lower part. Use
Maintenance and do-it-yourself
8-25
INTELLIGENT KEY BATTERY REPLACEMENT