Infiniti QX80/QX - 2011 Fuse Box Diagram

Infiniti QX80/QX - 2011 Fuse Box Diagram

1. Side ventilator (P. 4-30)
2. Meters and gauges (P. 2-5)
3. Hazard warning flasher switch (P. 2-43)
4. Center ventilator (P. 4-30)
5. Center multi-function control panel
(P. 4-3)
— Vehicle information and setting
buttons (P. 4-7)
6. Center display
— Around View Monitor (P. 4-19)
— Navigation system**
— DVD player operation (P. 4-58)
7. Clock (P. 2-51)
8. Defroster switch (P. 2-35)/Deicer switch*
(P. 2-36)
9. Front passenger supplemental air bag
(P. 1-50)
10. Fuse box (P. 8-23)
11. Parking brake (P. 5-19)
12. Hood release handle (P. 3-18)
13. Steering wheel
— Horn (P. 2-44)
— Driver supplemental air bag (P. 1-50)
— Power steering system (P. 5-94)
14. Push-button ignition switch (P. 5-10)
15. Climate controlled seat switch*
(P. 2-46)/Heated seat switch* (P. 2-44)
16. Remote tip-up 2nd row seat switch*
(P. 1-8)
17. Heated steering wheel switch (P. 2-43)
18. Power outlet (P. 2-52)
19. Front passenger air bag status light
(P. 1-57)
20. Cup holder (P. 2-54)
SSI0733
INSTRUMENT PANEL
0-8
Illustrated table of contents
VK56VD ENGINE
1. Window washer fluid reservoir (P. 8-14)
2. Fuse/fusible link holder (P. 8-21)
3. Engine oil dipstick (P. 8-9)
4. Power steering fluid reservoir (P. 8-12)
5. Engine oil filler cap (P. 8-9)
6. Brake fluid reservoir (P. 8-12)
7. Fuse/fusible link holder (P. 8-21)
8. Battery (P. 8-15)
9. Radiator filler cap (P. 8-7)
10. Engine coolant reservoir (P. 8-7)
11. Drive belts (P. 8-17)
12. Air cleaner (P. 8-18)
SDI2585
ENGINE COMPARTMENT
0-10
Illustrated table of contents
1. Side ventilator
2. Meters and gauges
3. Hazard indicator flasher switch
4. Center ventilator
5.
Center multi-function control panel
— Vehicle information and setting buttons
6. Center display
— Around View Monitor
— Navigation system**
— DVD player operation
7. Clock
8. Defroster switch/Deicer switch*
9. Front passenger supplemental air bag
10. Fuse box
11. Parking brake
12. Hood release handle
13. Steering wheel
— Horn
— Driver supplemental air bag
— Power steering system
14. Push-button ignition switch
15. Climate controlled seat switch*/Heated
seat switch*
16. Remote tip-up 2nd row seat switch*
17. Heated steering wheel switch
18. Power outlet
19. Front passenger air bag status light
20. Cup holder
21. Automatic air conditioning system
22. Audio system
23. Glove box
*: if so equipped
**: Refer to the separate Navigation System
Owner’s Manual.
SSI0733
INSTRUMENT PANEL
2-4
Instruments and controls
Type A
The power outlet is used for powering electrical
accessories such as cellular telephones.
CAUTION
The outlet and plug may be hot during or
immediately after use.
Do not use with accessories that exceed a
combined power draw of 12 volts, 120W (10A)
for all the power outlets. Do not use double
adapters
or
more
than
one
electrical
accessory.
This power outlet is not designed for use
with a cigarette lighter unit.
Push the plug in as far as it will go. If good
contact is not made, the plug may overheat
or the internal temperature fuse may blow.
Type B (if so equipped)
The power outlet (plug type) is located on the
back side of the front console. It can operate
when the ignition switch in the ON position and
the main switch (located in the console box) is
ON.
The specification of this power outlet is for use of
a 120 volt, 150W (1.25A) power draw.
To turn on or off the power supply to the outlet,
push the ON
±
1
or OFF
±
2
side of the main
switch. When the switch is turned to the ON
position, the indicator light
±
A
will illuminate.
Back side of front console
SIC4456
Luggage room
SIC4391
Main switch
SIC2648
Instruments and controls
2-53
Initialize entry/exit function
If the battery cable is disconnected, or if the
fuse opens, the entry/exit function will not work
though this function was set on before. In such
a case, after connecting the battery or replacing
with a new fuse, open and close the driver’s
door more than two times after the ignition
switch is turned from the ON position to the
LOCK position. The entry/exit function will be
activated.
MEMORY STORAGE
Two positions for the driver’s seat, steering
column and outside mirrors can be stored in the
automatic
drive
positioner
memory.
Follow
these procedures to use the memory system.
1. Move the selector lever to the P (Park)
position.
2. Push the ignition switch to the ON posi-
tion.
3. Adjust the driver’s seat, steering column
and outside mirrors to the desired posi-
tions by manually operating each adjust-
ing switch. For additional information, see
“SEATS” in the “1. Safety — Seats, seat
belts and supplemental restraint system”
section and “TILT/TELESCOPIC STEERING”
page 3-26 and “OUTSIDE MIRRORS” ear-
lier in this section.
4. Push the SET switch and, within 5 sec-
onds, push the memory switch (1 or 2)
fully for at least 1 second.
The indicator light for the pushed memory
switch will stay on for approximately 5 sec-
onds after pushing the switch.
If memory is stored in the same memory
switch, the previous memory will be deleted.
SPA2756
Pre-driving checks and adjustments
3-31
Linking Intelligent Key to a stored
memory position
The Intelligent Key can be linked to a stored
memory position with the following procedure.
1. Follow the steps for storing a memory
position.
2. While the indicator light for the memory
switch being set is illuminated for 5 sec-
onds, push the
button on the Intel-
ligent Key. If the indicator light blinks, the
Intelligent Key is linked to that memory
setting.
Push the ignition switch to the OFF position,
and then push the
button on the Intelli-
gent Key. The driver’s seat, steering wheel and
outside mirrors will move to the memorized
position.
Confirming memory storage
Push the ignition switch to the ON position
and push the SET switch. If the main memory
has not been stored, the indicator light will
come
on
for
approximately
0.5
second.
When the memory has stored in position, the
indicator light will stay on for approximately
5 seconds.
If the battery cable is disconnected, or if the
fuse opens, the memory will be canceled. In
this case, reset the desired position using
the previous procedure.
If optional Intelligent Keys are added to your
vehicle, the memory storage procedure to
switch 1 or 2 and linking Intelligent Key
procedure
to
a
stored
memory
position
should be performed again for each Intelli-
gent Key. For additional Intelligent Key infor-
mation, see “KEYS” earlier in this section.
Selecting the memorized position
1. Move the selector lever to the P (Park)
position.
2. Use one of the following methods to move
the driver’s seat, the outside mirrors and
the steering wheel.
Push the ignition switch to the ON posi-
tion and push the memory switch (1 or 2)
fully for at least 1 second.
Within 45 seconds of opening the driver’s
door, push the memory switch (1 or 2)
fully for at least 1 second.
The driver’s seat, steering column and
outside mirrors will move to the memo-
rized position or to the exit position when
the entry/exit function is set to active with
the indicator light flashing, and then the
light will stay on for approximately 5
seconds.
SYSTEM OPERATION
The automatic drive positioner system will not
work or will stop operating under the following
conditions:
When the vehicle speed is above 4 MPH (7
km/h).
When the adjusting switch for the driver’s
seat and steering column is turned on while
the automatic drive positioner is operating.
When the memory switch 1 or 2 is not
pushed for at least 1 second.
When the seat, steering column and outside
mirrors have already been moved to the
memorized position.
When no position is stored in the memory
switch.
When the engine is started while moving the
automatic drive positioner.
When the AT selector lever is moved from the
P (Park) position to any other position. (How-
ever, it will not be canceled if the switch is
pushed while the seat and steering column
are
returning
to
the
previous
positions
(entry/exit function).)
When the driver’s door remains open for
more
than
45
seconds
and
the
ignition
switch is not in the ON position.
3-32
Pre-driving checks and adjustments
SEEK tuning :
For AM and FM radio
Push the SEEK or TRACK button
or
to tune from low to high or high to low
frequencies and to stop at the next broad-
casting station.
For XM Satellite Radio
Push the SEEK or TRACK button
or
to tune to the first channel of the next
or previous category.
During satellite radio reception, the following no-
tices will be displayed under certain conditions.
NO SIGNAL (No signal is received while the
SAT tuner is connected.)
OFF AIR (Broadcasting signed off)
CHECK ANTENNA (Antenna connection error)
LOADING (When the initial setting is per-
formed)
UPDATING (When the satellite radio sub-
scription is not active)
INVALID CH (Invalid channel is received.)
SCAN tuning :
Push the SCAN tuning button to tune from low
to high frequencies and stop at each broadcast-
ing station/channel for 5 seconds. Pushing the
button again during this 5 second period will
stop SCAN tuning and the radio will remain
tuned to that station/channel.
If the SCAN tuning button is not pushed within
5 seconds, SCAN tuning moves to the next
station/channel.
±
1
to
±
6
Station memory operations :
12 stations/channels can be set for the FM band
(6 each for FM1 and FM2), 18 for XM radio (6
each for XM1, XM2 and XM3) and 6 stations can
be set for the AM band.
1. Choose the radio band using the radio
band select button.
2. Tune to the desired station/channel using
the SEEK, TRACK, SCAN button or the
radio TUNE knob.
3. Push and hold the desired station preset
button
±
1
to
±
6
until the radio mutes.
4. The station indicator will then come on
and the sound will resume. Memorizing is
now complete.
5. Other buttons can be set in the same
manner.
If the battery cable is disconnected, or if the
fuse opens, the radio memory will be erased. In
that case, reset the desired stations/channels.
Menu (XM Satellite Radio) :
When the “Menu” key on the display is selected
while the XM Satellite Radio is being played,
the menu list will be displayed.
The following items are available.
Preset List
Displays the preset channel list. If 1 of the 6
preset stations listed is touched and held,
the current station will be stored as the new
preset.
Customize Channel List
Selects specific channels to skip while using
the
TUNE,
SEEK/CATEGORY
or
Menu-
Categories feature.
Favorite Artists & Songs
Stores the current artist or song that is being
played. Touch the “Alert” key to be reminded
when the stored artist or song is playing on
a station while listening to XM.
Categories
Selecting a category will go to the first
channel in that category as defined by XM
Radio.
Direct Tune
Inputs the channel number by using a key-
pad.
4-56
Monitor, climate, audio, phone and voice recognition systems
VK56VD ENGINE MODEL
1. Window washer fluid reservoir
2. Fuse/fusible link holder
3. Engine oil dipstick
4. Power steering fluid reservoir
5. Engine oil filler cap
6. Brake fluid reservoir
7. Fuse/fusible link holder
8. Battery
9. Radiator filler cap
10. Engine coolant reservoir
11. Drive belts
12. Air cleaner
SDI2585
ENGINE COMPARTMENT CHECK
LOCATIONS
8-6
Maintenance and do-it-yourself
ENGINE COMPARTMENT
CAUTION
Never use a fuse of a higher or lower amperage
rating than that specified on the fuse box cover.
This could damage the electrical system or
cause a fire.
If any electrical equipment does not operate,
check for an open fuse.
1. Be sure the ignition switch is pushed to
the OFF or LOCK position and the head-
light switch is turned to OFF.
2. Open the engine hood and remove the
cover on the battery.
3. Remove the fuse/fusible link holder cover
±
1
,
±
2
or
±
3
.
4. Remove the fuse with the fuse puller.
5. If the fuse is open
±
A
, replace it with a
new fuse
±
B
. Spare fuses are stored in the
passenger compartment fuse box.
6. If a new fuse also opens, have the elec-
trical system checked and repaired by an
INFINITI retailer.
Fusible links
If any electrical equipment does not operate
and fuses are in good condition, check the
fusible links. If any of these fusible links are
melted,
replace
only
with
genuine
INFINITI
parts.
SDI1754
8-22
Maintenance and do-it-yourself
PASSENGER COMPARTMENT
CAUTION
Never use a fuse of a higher or lower amperage
rating than that specified on the fuse box cover.
This could damage the electrical system or
cause a fire.
If any electrical equipment does not operate,
check for an open fuse.
1. Be sure the ignition switch is pushed to
the OFF or LOCK position and the head-
light switch is turned to OFF.
2. Open the fuse box lid.
3. Remove the fuse with the fuse puller
±
A
.
4. If the fuse is open, replace it with a new
fuse.
5. If a new fuse also opens, have the electri-
cal system checked and repaired by an
INFINITI retailer. Spare fuses are stored in
the fuse box.
Extended storage switch (if so
equipped)
To reduce battery drain, the extended storage
switch comes from the factory switched off.
Prior to delivery of your vehicle, the switch is
pushed in (switched on) and should always
remain on.
If any electrical equipment does not operate,
remove the extended storage switch and check
for an open fuse.
SDI2519
SDI2704
Maintenance and do-it-yourself
8-23
NOTE:
If the extended storage switch malfunctions or if
the fuse is open, it is not necessary to replace
the switch. In this case, remove the extended
storage switch and replace it with a new fuse of
the same rating.
How to remove the extended storage switch:
1. To remove the extended storage switch,
be sure the ignition switch is in the OFF or
LOCK position.
2. Be sure the headlight switch is in the OFF
position.
3. Remove the fuse box cover.
4. Pinch the locking tabs
±
1
found on each
side of the storage switch.
5. Pull the storage switch straight out from
the fuse box
±
2
.
Replace the battery as follows:
1. Release the lock knob at the back of the
Intelligent Key and remove the mechanical
key.
2. Insert a small screwdriver into the slit of
the corner and twist it to separate the
upper part from the lower part. Use a
cloth to protect the casing.
3. Replace the battery with a new one.
Recommended battery: CR2025 or equiva-
lent.
Do
not
touch
the
internal
circuit
and
electric terminals as it could cause a
malfunction.
Hold the battery by the edges. Holding
the battery across the contact points will
seriously deplete the storage capacity.
Make
sure
that
the
+
side
faces
the
bottom of the case.
SDI2451
INTELLIGENT KEY BATTERY REPLACEMENT
8-24
Maintenance and do-it-yourself