Infiniti QX70/FX - 2013 Fuse Box Diagram

Infiniti QX70/FX - 2013 Fuse Box Diagram

0-8
Illustrated table of contents
GUID-64430E38-4D64-41A9-9A8D-212C3600A5A4
JVC0209X
1.
Side ventilator (P.4-48)
2.
Paddle shifter (if so equipped) (P.5-17)
3.
Meters and gauges (P.2-6)
4.
Center ventilator (P.4-48)
5.
Center multi-function control panel
Navigation
system*
(if
so
equipped)
Vehicle
information
and
setting
buttons (P.4-9)
Around
View
Monitor
(if
so
equipped) (P.4-31)
6.
Center display (P.4-3)
7.
Clock (P.2-49)
8.
Hazard warning flasher switch (P.6-2)
9.
Front passenger supplemental air bag
(P.1-37)
10. Hood release handle (P.3-18)
11. Fuse box cover (P.8-25)
12. Parking brake (P.5-20)
13. Steering wheel
Horn (P.2-43)
Driver supplement air bag (P.1-37)
14. Push-button ignition switch (P.5-11)
15. Front passenger air bag status light
(P.1-43)
16. Rear window defroster switch (P.2-36)
17. Power outlet (P.2-49)
18. Automatic climate control system
(P.4-48)
19. Audio system (P.4-54)
20. Glove box lid release handle (P.2-52)
*: Refer to the separate Navigation System
Owner
s Manual.
INSTRUMENT PANEL
0-10
Illustrated table of contents
GUID-0E9F7C61-12C7-4359-B3A7-F2B6A5B2D72A
SDI2262
VQ37VHR ENGINE
GUID-E1D33D79-85C2-48D3-81C3-5821CAFCD554
1.
Fuse/fusible link holder (P.8-25)
2.
Battery (P.8-17)
3.
Radiator filler cap (P.8-9)
4.
Engine oil dipstick (P.8-11)
5.
Engine oil filler cap (P.8-11)
6.
Brake fluid reservoir (P.8-16)
7.
Window washer fluid reservoir
(P.8-16)
8.
Power steering fluid reservoir (P.8-15)
9.
Air cleaner (P.8-21)
10. Drive belts (P.8-19)
11. Coolant reservoir (P.8-9)
ENGINE COMPARTMENT
SDI2264
VK50VE ENGINE
GUID-B346F336-F455-4747-ABBD-D987DA3CB446
1.
Fuse/fusible link holder (P.8-25)
2.
Battery (P.8-17)
3.
Engine oil filler cap (P.8-11)
4.
Radiator filler cap (P.8-9)
5.
Engine oil dipstick (P.8-11)
6.
Brake fluid reservoir (P.8-16)
7.
Window washer fluid reservoir
(P.8-16)
8.
Power steering fluid reservoir (P.8-15)
9.
Air cleaner (P.8-21)
10. Drive belt location (P.8-19)
11. Coolant reservoir (P.8-9)
Illustrated table of contents
0-11
GUID-7F14A382-7F82-4651-BDC7-0E12FD740023
JVC0209X
1.
Side ventilator
2.
Paddle shifter (if so equipped)
3.
Meters and gauges
4.
Center ventilator
5.
Center multi-function control panel
Navigation
system*
(if
so
equipped)
Vehicle
information
and
setting
buttons
Around
View
Monitor
(if
so
equipped)
6.
Center display
7.
Clock
8.
Hazard warning flasher switch
9.
Front passenger supplemental air bag
10. Hood release handle
11. Fuse box cover
12. Parking brake
13. Steering wheel
Horn
Driver supplement air bag
14. Push-button ignition switch
15. Front passenger air bag status light
16. Rear window defroster switch
17. Power outlet
18. Automatic climate control system
19. Audio system
20. Glove box lid release handle
*: Refer to the separate Navigation System
Owner
s Manual.
Instruments and controls
2-5
INSTRUMENT PANEL
2-50
Instruments and controls
The power outlet is used for powering
electrical
accessories
such
as
cellular
telephones.
CAUTION
.
The outlet and plug may be hot during or
immediately after use.
.
Do not use with accessories that exceed
a 12 volt, 120W (10A) power draw. Do
not use double adapters or more than
one electrical accessory.
.
Use power outlet with the engine run-
ning to avoid discharging the vehicle
battery.
.
Avoid using power outlet when the air
conditioner, headlights or rear window
defroster is on.
.
This power outlet is not designed for use
with a cigarette lighter unit.
.
Push the plug in as far as it will go. If
good contact is not made, the plug may
overheat
or
the
internal
temperature
fuse may blow.
.
Before inserting or disconnecting a plug,
be sure the electrical accessory being
used is turned OFF.
.
When not in use, be sure to close the
cap. Do not allow water or any other
liquid to contact the outlet.
GUID-8EEEA6B4-CDF3-4FBB-B8B5-B29FAB461BC4
CUP HOLDERS
GUID-36924EE1-CA72-472A-8420-EFDBB58A8A97
CAUTION
.
Avoid abrupt starting and braking when
the cup holder is being used to prevent
spilling the drink. If the liquid is hot, it
can scald you or your passenger.
.
Use only soft cups in the cup holder.
Hard
objects
can
injure
you
in
an
accident.
.
Do not recline the rear seatback when
you use the cup holders on the rear
armrest. Doing so may cause the bev-
erages to spill over, and if they are hot,
they may scald the passengers.
STORAGE
Initialize entry/exit function
GUID-CF566402-5592-4485-AD8B-9C26CE39C0D0
If the battery cable is disconnected, or if
the fuse opens, the entry/exit function will
not work though this function was set on
before. In such a case, after connecting the
battery or replacing with a new fuse, open
and close the driver
s door more than two
times after the ignition switch is turned
from the ON position to the LOCK position.
The entry/exit function will be activated.
SPA2525
SEAT SYNCHRONIZATION FUNCTION
GUID-E98A706D-B662-4EF7-B535-D126949B4047
The seat synchronization function automa-
tically adjusts the positions of the steering
wheel and outside mirrors when the seat is
adjusted using the power seat switches.
However, the steering wheel and outside
mirrors will not move if the seat is adjusted
over the maximum thresholds. The system
considers
that
the
steering
wheel
and
outside mirror adjustments are not neces-
sary because the seat may not be adjusted
for
the
driving
position.
Note
that
the
function is set to disabled as the factory
default setting.
The seat synchronization function operates
under the following conditions:
.
The ignition switch is in the ON posi-
tion.
.
The selector lever is in the P (Park)
position.
If the outside mirrors or the steering wheel
reaches
its
maximum
adjustment,
the
function is automatically disabled. Restart
the
function
by
selecting
a
previously
stored seat memory
position using the
memory switches (1 or 2). An Intelligent
Key
that
was
previously
linked
to
the
stored seat memory can also be used to
restart the function.
If a seat position was not previously stored
in the seat memory, restart the function by
adjusting the steering wheel and outside
mirrors
manually
for
your
best
driving
position and then drive the vehicle above
4 MPH (7 km/h).
Cancel or activate seat synchroni-
zation function
GUID-3FA521AC-5DED-4C59-ABAA-9F045EA9F9E8
The selector lever must be in the P (Park)
position with the ignition switch in the ACC
position.
The seat synchronization function can be
activated
or
canceled
by
pushing
and
Pre-driving checks and adjustments
3-33
3-34
Pre-driving checks and adjustments
holding the SET switch for more than 10
seconds while the ignition switch is in the
ACC position.
The
indicator
lights
on
the
memory
switches (1 and 2) will blink once when
the function is canceled, and the indicator
lights will blink twice when the function is
activated. Note that the indicator lights
may
illuminate
after
5
seconds
while
holding
the
SET switch. This
indicates
readiness for linking the Intelligent Key to
a stored memory position. Keep the SET
switch pushed for more than 10 seconds to
turn on or off the seat synchronization
function.
MEMORY STORAGE
GUID-7C0BBA0A-C562-4C67-B0C1-457131FC41EB
Two positions for the driver
s seat, steering
column and outside mirrors can be stored
in the automatic drive positioner memory.
Follow these procedures to use the mem-
ory system.
1.
Move the selector lever to the P (Park)
position.
2.
Push the ignition switch to the ON
position.
3.
Adjust the driver
s seat, steering col-
umn and outside mirrors to the desired
positions by manually operating each
adjusting switch. For additional infor-
mation, see
Seat belts
(P.1-11) and
Tilt/telescopic steering
(P.3-27) and
Outside mirrors
(P.3-30).
4.
Push
the
SET switch
and,
within
5
seconds, push the memory switch (1
or 2) fully for at least 1 second.
The
indicator
light
for
the
pushed
memory switch will stay on for approxi-
mately 5 seconds after pushing the
switch.
If
memory
is
stored
in
the
same
memory switch, the previous memory
will be deleted.
Linking Intelligent Key to a stored
memory position
GUID-E6D7628D-A73F-49DD-90F8-01DEB392FA18
The Intelligent Key can be linked to a
stored memory position with the following
procedure.
1.
Follow the steps for storing a memory
position.
2.
While the indicator light for the memory
switch being set is illuminated for 5
seconds, push the
button on the
Intelligent Key. If the indicator light
blinks, the Intelligent Key is linked to
that memory setting.
Push the ignition switch to the OFF posi-
tion, and then push the
button on the
Intelligent Key. The driver
s seat, steering
wheel and outside mirrors will move to the
memorized position or to the exit position
when
the
entry/exit
function
is
set
to
active.
Confirming memory storage
GUID-E77C3565-8BEE-460B-9BBC-75EC608F88AD
.
Push
the
ignition
switch
to
the
ON
position and push the SET switch. If
the main memory has not been stored,
the indicator light will come on for
approximately 0.5 second. When the
memory
has stored in position, the
indicator light will stay on for approxi-
mately 5 seconds.
.
If the battery cable is disconnected, or if
the fuse opens, the memory will be
canceled. In this case, reset the desired
position using the previous procedure.
.
If optional Intelligent Keys are added to
your vehicle, the memory storage pro-
cedure to switch 1 or 2 and linking
Intelligent Key procedure to a stored
memory position should be performed
again
for
each
Intelligent
Key.
For
additional Intelligent Key information,
see
Keys
(P.3-2).
4-72
Monitor, climate, audio, phone and voice recognition systems
.
For SiriusXM Satellite Radio
Turn the radio tuning knob to seek
channels
from
all
of
the
categories
when any category is not selected.
SEEK tuning/CATEGORY (CAT):
GUID-D73A39BF-43C8-459F-9C24-47B7F579C407
.
For AM and FM radio
Push the SEEK·CAT or TRACK button to
tune from low to high or high to low
frequencies and to stop at the next
broadcasting station.
.
For SiriusXM Satellite Radio
Push the SEEK·CAT or TRACK button to
tune to the first channel of the next or
previous category.
During satellite radio reception, the follow-
ing notices will be displayed under certain
conditions.
.
NO SIGNAL (No signal is received while
the SAT tuner is connected.)
.
OFF AIR (Broadcasting signed off)
.
CHECK ANTENNA (Antenna connection
error)
.
LOADING (When the initial setting is
performed)
.
UPDATING
(When
the
satellite
radio
subscription is not active)
SCAN tuning:
GUID-D73A39BF-43C8-459F-9C24-47B7F579C407
Push the radio SCAN button to tune from
low to high frequencies and stop at each
broadcasting station/channel for
5 sec-
onds. Pushing the button again during this
5 seconds period will stop SCAN tuning
and the radio will remain tuned to that
station/channel.
If the radio SCAN button is not pushed
within 5 seconds, SCAN tuning moves to
the next station/channel.
*
1
to
*
6
Station memory operations:
GUID-D73A39BF-43C8-459F-9C24-47B7F579C407
12 stations/channels can be set for the FM
band (6 each for FM1 and FM2), 18 for
SiriusXM Satellite Radio (6 each for XM1,
XM2 and XM3) and 6 stations can be set
for the AM band.
1.
Choose the radio band using the radio
band select button.
2.
Tune
to
the
desired
station/channel
using the SEEK·CAT, TRACK, radio SCAN
button or the radio tuning knob.
3.
Push
and
hold
the
desired
station
preset button
*
1
to
*
6
until the radio
mutes.
4.
The station indicator will then come on
and the sound will resume. Memorizing
is now complete.
5.
Other buttons can be set in the same
manner.
If the battery cable is disconnected, or if
the fuse opens, the radio memory will be
erased. In that case, reset the desired
stations/channels.
List (AM and FM radio) (models with
navigation system):
GUID-D73A39BF-43C8-459F-9C24-47B7F579C407
When the
List
key on the display is
selected while the FM or AM radio is being
played,
the
preset
station
list
will
be
displayed.
If
1
of
the
6
preset
stations
listed
is
touched and held, the current station will
be stored as the new preset.
Menu (SiriusXM Satellite Radio) (models
with navigation system):
GUID-D73A39BF-43C8-459F-9C24-47B7F579C407
When the
Menu
key on the display is
selected while the SiriusXM Satellite Radio
is being played, the menu list will be
displayed.
The following items are available.
.
Preset List
Displays the preset channel list. If 1 of
the 6 preset stations listed is touched
and held, the current station will be
GUID-591BFA5B-ACC0-4C10-805D-84A972DE4007
SDI2262
VQ37VHR ENGINE
GUID-A9A92F72-9984-4610-9A98-DDA348D7EADC
1.
Fuse/fusible link holder
2.
Battery
3.
Radiator filler cap
4.
Engine oil dipstick
5.
Engine oil filler cap
6.
Brake fluid reservoir
7.
Window washer fluid reservoir
8.
Power steering fluid reservoir
9.
Air cleaner
10. Drive belts
11. Coolant reservoir
Maintenance and do-it-yourself
8-7
ENGINE COMPARTMENT CHECK LOCATIONS
SDI2264
1.
Fuse/fusible link holder
2.
Battery
3.
Engine oil filler cap
4.
Radiator filler cap
5.
Engine oil dipstick
6.
Brake fluid reservoir
7.
Window washer fluid reservoir
8.
Power steering fluid reservoir
9.
Air cleaner
10. Drive belt location
11. Coolant reservoir
GUID-D578AF43-9C89-4D61-B7ED-7173E3DD4951
The engine cooling system is filled at the
factory with a pre-diluted mixture of 50%
Genuine NISSAN Long Life Antifreeze/Cool-
ant (blue) and 50% water to provide year-
round anti-freeze and coolant protection.
The antifreeze solution contains rust and
corrosion
inhibitors.
Additional
engine
cooling system additives are not neces-
sary.
WARNING
.
Never remove the radiator or coolant
reservoir cap when the engine is hot.
Wait until the engine and radiator cool
down. Serious burns could be caused by
high pressure fluid escaping from the
radiator.
See
precautions
in
If
your
vehicle overheats
(P.6-12) of this man-
ual.
.
The radiator is equipped with a pressure
type
radiator cap. To
prevent
engine
damage, use only
a genuine NISSAN
radiator cap.
Maintenance and do-it-yourself
8-9
ENGINE COOLING SYSTEM
GUID-1FFE3F37-9A0E-403A-AB85-F46C763F61A1
SDI1479A
ENGINE COMPARTMENT
GUID-52624265-87A7-4571-8C28-08C50EC3EF99
CAUTION
Never
use
a
fuse
of
a
higher
or
lower
amperage rating than that specified on the
fuse
box
cover. This
could
damage
the
electrical system or cause a fire.
If
any
electrical
equipment
does
not
operate, check for an open fuse.
1.
Be sure the ignition switch is pushed to
the
OFF
or
LOCK
position
and
the
headlight switch is turned to OFF.
2.
Open the engine hood and remove the
cover on the battery.
3.
Remove
the
fuse/fusible
link
holder
cover.
4.
Remove the fuse with the fuse puller.
SDI1754
5.
If the fuse is open
*
A
, replace it with a
new fuse
*
B
. Spare fuses are stored in
the passenger compartment fuse box.
6.
If a new fuse also opens, have the
electrical system checked and repaired
by an INFINITI retailer.
Fusible links
GUID-D884C9A5-FCA0-409B-890B-D500A8CB43BA
If
any
electrical
equipment
does
not
operate and fuses are in good condition,
check the fusible links. If any of these
fusible links are melted, replace only with
genuine INFINITI parts.
Maintenance and do-it-yourself
8-25
FUSES
8-26
Maintenance and do-it-yourself
SDI2034
PASSENGER COMPARTMENT
GUID-9F151796-01BF-4EB6-89CB-D2932E45E349
CAUTION
Never
use
a
fuse
of
a
higher
or
lower
amperage rating than that specified on the
fuse
box
cover. This
could
damage
the
electrical system or cause a fire.
If
any
electrical
equipment
does
not
operate, check for an open fuse.
1.
Be sure the ignition switch is pushed to
the
OFF
or
LOCK
position
and
the
headlight switch is turned to OFF.
2.
Open the fuse box lid.
3.
Remove the fuse with the fuse puller
*
A
.
4.
If the fuse is open, replace it with a new
fuse.
5.
If a new fuse also opens, have the
electrical system checked and repaired
by an INFINITI retailer. Spare fuses are
stored in the fuse box.
SDI2704
Extended storage switch (if so
equipped)
GUID-841E2582-90C7-4A31-95B9-BCD88C3499FD
To
reduce
battery
drain,
the
extended
storage
switch
comes
from
the
factory
switched
off.
Prior
to
delivery
of
your
vehicle, the switch is pushed in (switched
on) and should always remain on.
If
any
electrical
equipment
does
not
operate,
remove
the
extended
storage
switch and check for an open fuse.
NOTE:
If the extended storage switch malfunc-
tions, or if the fuse is open, it is not
necessary to replace the switch. In this
case, remove the extended storage switch
and replace it with a new fuse of the same
rating.
How to remove the extended storage
switch:
GUID-D73A39BF-43C8-459F-9C24-47B7F579C407
1.
To remove the extended storage switch,
be sure the ignition switch is in the OFF
or LOCK position.
2.
Be sure the headlight switch is in the
OFF position.
3.
Remove the fuse box cover.
4.
Pinch the locking tabs
*
1
found on
each side of the storage switch.
5.
Pull
the
storage
switch
straight
out
from the fuse box
*
2
.
GUID-C26BD3DD-C31B-406C-B9E9-1FBAAEABFC84
CAUTION
Be careful not to allow children to swallow
the battery and removed parts.
SDI2451
Replace the battery as follows:
1.
Release the lock knob at the back of the
Intelligent Key and remove the mechan-
ical key.
2.
Insert
a
flat-blade
screwdriver
*
A
wrapped with a cloth into the slit
*
B
of the corner and twist it to separate
Maintenance and do-it-yourself
8-27
INTELLIGENT KEY BATTERY REPLACEMENT