Infiniti QX70/FX - 2012 Fuse Box Diagram

Infiniti QX70/FX - 2012 Fuse Box Diagram

0-8
Illustrated table of contents
JVC0209X
1.
Side ventilator (P.4-42)
2.
Paddle shifter (if so equipped) (P.5-17)
3.
Meters and gauges (P.2-6)
4.
Center ventilator (P.4-42)
5.
Center multi-function control panel
Navigation
system*
(if
so
equipped)
Vehicle
information
and
setting
buttons (P.4-9)
Around
View
Monitor
(if
so
equipped) (P.4-31)
6.
Center display (P.4-3)
7.
Clock (P.2-48)
8.
Hazard warning flasher switch (P.2-42)
9.
Front passenger supplemental air bag
(P.1-37)
10. Hood release handle (P.3-18)
11. Fuse box cover (P.8-25)
12. Parking brake (P.5-20)
13. Steering wheel
Horn (P.2-43)
Driver supplement air bag (P.1-37)
14. Push-button ignition switch (P.5-10)
15. Front passenger air bag status light
(P.1-42)
16. Rear window defroster switch (P.2-36)
17. Power outlet (P.2-49)
18. Automatic climate control system
(P.4-43)
19. Audio system (P.4-49)
20. Glove box lid release handle (P.2-52)
*: Refer to the separate Navigation System
Owner
s Manual.
INSTRUMENT PANEL
0-10
Illustrated table of contents
SDI2262
VQ35HR ENGINE
1.
Fuse/fusible link holder (P.8-25)
2.
Battery (P.8-17)
3.
Radiator filler cap (P.8-9)
4.
Engine oil dipstick (P.8-11)
5.
Engine oil filler cap (P.8-11)
6.
Brake fluid reservoir (P.8-16)
7.
Window washer fluid reservoir
(P.8-16)
8.
Power steering fluid reservoir (P.8-15)
9.
Air cleaner (P.8-21)
10. Drive belts (P.8-19)
11. Coolant reservoir (P.8-9)
ENGINE COMPARTMENT
SDI2264
VK50VE ENGINE
1.
Fuse/fusible link holder (P.8-25)
2.
Battery (P.8-17)
3.
Engine oil filler cap (P.8-11)
4.
Radiator filler cap (P.8-9)
5.
Engine oil dipstick (P.8-11)
6.
Brake fluid reservoir (P.8-16)
7.
Window washer fluid reservoir
(P.8-16)
8.
Power steering fluid reservoir (P.8-15)
9.
Air cleaner (P.8-21)
10. Drive belt location (P.8-19)
11. Coolant reservoir (P.8-9)
Illustrated table of contents
0-11
JVC0209X
1.
Side ventilator
2.
Paddle shifter (if so equipped)
3.
Meters and gauges
4.
Center ventilator
5.
Center multi-function control panel
Navigation
system*
(if
so
equipped)
Vehicle
information
and
setting
buttons
Around
View
Monitor
(if
so
equipped)
6.
Center display
7.
Clock
8.
Hazard warning flasher switch
9.
Front passenger supplemental air bag
10. Hood release handle
11. Fuse box cover
12. Parking brake
13. Steering wheel
Horn
Driver supplement air bag
14. Push-button ignition switch
15. Front passenger air bag status light
16. Rear window defroster switch
17. Power outlet
18. Automatic climate control system
19. Audio system
20. Glove box lid release handle
*: Refer to the separate Navigation System
Owner
s Manual.
Instruments and controls
2-5
INSTRUMENT PANEL
SIC3631
Front
SIC4274
Center console
SIC3835
Rear console
SIC3836
Cargo area
The power outlet is used for powering
electrical
accessories
such
as
cellular
telephones.
CAUTION
.
The outlet and plug may be hot during or
immediately after use.
.
Do not use with accessories that exceed
a 12 volt, 120W (10A) power draw. Do
not use double adapters or more than
one electrical accessory.
.
Use power outlet with the engine run-
ning to avoid discharging the vehicle
battery.
.
Avoid using power outlet when the air
conditioner, headlights or rear window
defroster is on.
.
This power outlet is not designed for use
with a cigarette lighter unit.
.
Push the plug in as far as it will go. If
good contact is not made, the plug may
overheat
or
the
internal
temperature
fuse may blow.
.
Before inserting or disconnecting a plug,
be sure the electrical accessory being
used is turned OFF.
Instruments and controls
2-49
POWER OUTLET
Cancel or activate entry/exit func-
tion
The selector lever must be in the P (Park)
position with the ignition switch in the OFF
position.
The entry/exit function can be activated or
canceled by pressing and holding the SET
switch for more than 10 seconds.
The
indicator
lights
on
the
memory
switches (1 and 2) will blink once when
the function is canceled, and the indicator
lights will blink twice when the function is
activated. Note that the indicator lights
may
illuminate
after
5
seconds
while
holding
the
SET switch. This
indicates
readiness for linking the Intelligent Key to
a stored memory position. Keep the SET
switch pressed for more than 10 seconds
to turn on or off the entry/exit function.
The entry/exit function can also be acti-
vated
or
canceled
if
the
Lift
Steering
Wheel on Exit
key or
Slide Driver Seat
Back on Exit
key is turned to ON or OFF in
the
Comfort
settings.
(See
Vehicle
information and settings
(P.4-9).)
Initialize entry/exit function
If the battery cable is disconnected, or if
the fuse opens, the entry/exit function will
not work though this function was set on
before. In such a case, after connecting the
battery or replacing with a new fuse, open
and close the driver
s door more than two
times after the ignition switch is turned
from the ON position to the LOCK position.
The entry/exit function will be activated.
SPA2525
SEAT SYNCHRONIZATION FUNCTION
The seat synchronization function automa-
tically adjusts the positions of the steering
wheel and outside mirrors when the seat is
adjusted using the power seat switches.
However, the steering wheel and outside
mirrors will not move if the seat is adjusted
over the maximum thresholds. The system
considers
that
the
steering
wheel
and
outside mirror adjustments are not neces-
sary because the seat may not be adjusted
for
the
driving
position.
Note
that
the
function is set to disabled as the factory
default setting.
Pre-driving checks and adjustments
3-33
Push the ignition switch to the OFF posi-
tion, and then push the
button on the
Intelligent Key. The driver
s seat, steering
wheel and outside mirrors will move to the
memorized position or to the exit position
when
the
entry/exit
function
is
set
to
active.
Confirming memory storage
.
Push
the
ignition
switch
to
the
ON
position and push the SET switch. If
the main memory has not been stored,
the indicator light will come on for
approximately 0.5 second. When the
memory
has stored in position, the
indicator light will stay on for approxi-
mately 5 seconds.
.
If the battery cable is disconnected, or if
the fuse opens, the memory will be
canceled. In this case, reset the desired
position using the previous procedure.
.
If optional Intelligent Keys are added to
your vehicle, the memory storage pro-
cedure to switch 1 or 2 and linking
Intelligent Key procedure to a stored
memory position should be performed
again
for
each
Intelligent
Key.
For
additional Intelligent Key information,
see
Keys
(P.3-2).
Selecting the memorized position
1.
Move the selector lever to the P (Park)
position.
2.
Use one of the following methods to
move
the
driver
s
seat,
the
outside
mirrors and the steering wheel.
.
Push the ignition switch to the ON
position
and
push
the
memory
switch (1 or 2) fully for at least 1
second.
.
Within 45 seconds of opening the
driver
s
door,
push
the
memory
switch (1 or 2) fully for at least 1
second.
The driver
s seat, steering column and
outside mirrors will move to the mem-
orized position or to the exit position
when the entry/exit function is set to
active with the indicator light flashing,
and then the light will
stay on for
approximately 5 seconds.
SYSTEM OPERATION
The automatic drive positioner system will
not work or will stop operating under the
following conditions:
.
When the vehicle speed is above 4 MPH
(7 km/h).
.
When
the
adjusting
switch
for
the
driver
s seat and steering column is
turned on while the automatic drive
positioner is operating.
.
When the memory switch 1 or 2 is not
pushed for at least 1 second.
.
When the seat, steering column and
outside
mirrors
have
already
been
moved to the memorized position.
.
When
no
position
is
stored
in
the
memory switch.
.
When
the
engine
is
started
while
moving the automatic drive positioner.
.
When the AT selector lever is moved
from the P (Park) position to any other
position.
(However,
it
will
not
be
canceled if the switch is pushed while
the
seat
and
steering
column
are
returning
to
the
previous
positions
(entry/exit function).)
.
When the driver
s door remains open
for
more
than
45
seconds and
the
ignition switch is not in the ON posi-
tion.
.
The
seat
synchronization
function
is
automatically disabled if the outside
mirrors or steering wheel reaches its
maximum adjustment.
Pre-driving checks and adjustments
3-35
.
LOADING (When the initial setting is
performed)
.
UPDATING
(When
the
satellite
radio
subscription is not active)
SCAN tuning:
Push the SCAN tuning button to tune from
low to high frequencies and stop at each
broadcasting station/channel for
5 sec-
onds. Pushing the button again during this
5 seconds period will stop SCAN tuning
and the radio will remain tuned to that
station/channel.
If the SCAN tuning button is not pushed
within 5 seconds, SCAN tuning moves to
the next station/channel.
*
1
to
*
6
Station memory operations:
12 stations/channels can be set for the FM
band (6 each for FM1 and FM2), 18 for XM
radio (6 each for XM1, XM2 and XM3) and 6
stations can be set for the AM band.
1.
Choose the radio band using the radio
band select button.
2.
Tune
to
the
desired
station/channel
using
the
SEEK·CAT,
TRACK,
SCAN
button or the radio TUNE knob.
3.
Push
and
hold
the
desired
station
preset button
*
1
to
*
6
until the radio
mutes.
4.
The station indicator will then come on
and the sound will resume. Memorizing
is now complete.
5.
Other buttons can be set in the same
manner.
If the battery cable is disconnected, or if
the fuse opens, the radio memory will be
erased. In that case, reset the desired
stations/channels.
List (AM and FM radio) (models with
navigation system):
When the
List
key on the display is
selected while the FM or AM radio is being
played,
the
preset
station
list
will
be
displayed.
If
1
of
the
6
preset
stations
listed
is
touched and held, the current station will
be stored as the new preset.
Menu (XM Satellite Radio) (models with
navigation system):
When the
Menu
key on the display is
selected while the XM Satellite Radio is
being
played,
the
menu
list
will
be
displayed.
The following items are available.
.
Preset List
Displays the preset channel list. If 1 of
the 6 preset stations listed is touched
and held, the current station will be
stored as the new preset.
.
Customize Channel List
Selects specific channels to skip while
using
the
TUNE,
SEEK/CATEGORY or
Menu-Categories feature.
.
Favorite Artists & Songs
Stores the current artist or song that is
being played. Touch the
Alert
key to
be reminded when the stored artist or
song
is
playing
on
a
station
while
listening to XM.
.
Categories
Selecting a category will go to the first
channel in that category as defined by
XM Radio.
.
Direct Tune
Inputs the channel number by using a
keypad.
Text (models without navigation system):
When the
Text
key is selected with the
INFINITI controller on the display and then
the
ENTER
button
is
pushed
while
the
satellite radio is being played, the text
information listed below will be displayed
Monitor, climate, audio, phone and voice recognition systems
4-65
SDI2262
VQ35HR ENGINE
1.
Fuse/fusible link holder
2.
Battery
3.
Radiator filler cap
4.
Engine oil dipstick
5.
Engine oil filler cap
6.
Brake fluid reservoir
7.
Window washer fluid reservoir
8.
Power steering fluid reservoir
9.
Air cleaner
10. Drive belts
11. Coolant reservoir
Maintenance and do-it-yourself
8-7
ENGINE COMPARTMENT CHECK LOCATIONS
SDI2264
1.
Fuse/fusible link holder
2.
Battery
3.
Engine oil filler cap
4.
Radiator filler cap
5.
Engine oil dipstick
6.
Brake fluid reservoir
7.
Window washer fluid reservoir
8.
Power steering fluid reservoir
9.
Air cleaner
10. Drive belt location
11. Coolant reservoir
The engine cooling system is filled at the
factory with a pre-diluted mixture of 50%
Genuine NISSAN Long Life Antifreeze/Cool-
ant (blue) and 50% water to provide year-
round anti-freeze and coolant protection.
The antifreeze solution contains rust and
corrosion
inhibitors.
Additional
engine
cooling system additives are not neces-
sary.
WARNING
.
Never remove the radiator or coolant
reservoir cap when the engine is hot.
Wait until the engine and radiator cool
down. Serious burns could be caused by
high pressure fluid escaping from the
radiator.
See
precautions
in
If
your
vehicle overheats
(P.6-11) of this man-
ual.
.
The radiator is equipped with a pressure
type
radiator cap. To
prevent
engine
damage, use only
a genuine NISSAN
radiator cap.
Maintenance and do-it-yourself
8-9
ENGINE COOLING SYSTEM
SDI1479A
ENGINE COMPARTMENT
CAUTION
Never
use
a
fuse
of
a
higher
or
lower
amperage rating than that specified on the
fuse
box
cover. This
could
damage
the
electrical system or cause a fire.
If
any
electrical
equipment
does
not
operate, check for an open fuse.
1.
Be sure the ignition switch is pushed to
the
OFF
or
LOCK
position
and
the
headlight switch is turned to OFF.
2.
Open the engine hood and remove the
cover on the battery.
3.
Remove
the
fuse/fusible
link
holder
cover.
4.
Remove the fuse with the fuse puller.
SDI1754
5.
If the fuse is open
*
A
, replace it with a
new fuse
*
B
. Spare fuses are stored in
the passenger compartment fuse box.
6.
If a new fuse also opens, have the
electrical system checked and repaired
by an INFINITI retailer.
Fusible links
If
any
electrical
equipment
does
not
operate and fuses are in good condition,
check the fusible links. If any of these
fusible links are melted, replace only with
genuine INFINITI parts.
Maintenance and do-it-yourself
8-25
FUSES
8-26
Maintenance and do-it-yourself
SDI2034
PASSENGER COMPARTMENT
CAUTION
Never
use
a
fuse
of
a
higher
or
lower
amperage rating than that specified on the
fuse
box
cover. This
could
damage
the
electrical system or cause a fire.
If
any
electrical
equipment
does
not
operate, check for an open fuse.
1.
Be sure the ignition switch is pushed to
the
OFF
or
LOCK
position
and
the
headlight switch is turned to OFF.
2.
Open the fuse box lid.
3.
Remove the fuse with the fuse puller
*
A
.
4.
If the fuse is open, replace it with a new
fuse.
5.
If a new fuse also opens, have the
electrical system checked and repaired
by an INFINITI retailer. Spare fuses are
stored in the fuse box.
SDI2704
Extended storage switch (if so
equipped)
To
reduce
battery
drain,
the
extended
storage
switch
comes
from
the
factory
switched
off.
Prior
to
delivery
of
your
vehicle, the switch is pushed in (switched
on) and should always remain on.
If
any
electrical
equipment
does
not
operate,
remove
the
extended
storage
switch and check for an open fuse.
NOTE:
If the extended storage switch malfunc-
tions, or if the fuse is open, it is not
necessary to replace the switch. In this
case, remove the extended storage switch
and replace it with a new fuse of the same
rating.
How to remove the extended storage
switch:
1.
To remove the extended storage switch,
be sure the ignition switch is in the OFF
or LOCK position.
2.
Be sure the headlight switch is in the
OFF position.
3.
Remove the fuse box cover.
4.
Pinch the locking tabs
*
1
found on
each side of the storage switch.
5.
Pull
the
storage
switch
straight
out
from the fuse box
*
2
.
CAUTION
Be careful not to allow children to swallow
the battery and removed parts.
SDI2294
Replace the battery as follows:
1.
Release the lock knob at the back of the
Intelligent Key and remove the mechan-
ical key.
2.
Insert
a
flat-blade
screwdriver
*
A
wrapped with a cloth into the slit
*
B
of the corner and twist it to separate
Maintenance and do-it-yourself
8-27
INTELLIGENT KEY BATTERY REPLACEMENT