Infiniti QX70/FX - 2011 Fuse Box Diagram

Infiniti QX70/FX - 2011 Fuse Box Diagram

SSI0635
1.
Side ventilator (P.4-41)
2.
Paddle shifter (if so equipped) (P.5-16)
3.
Meters and gauges (P.2-5)
4.
Center ventilator (P.4-41)
5.
Center multi-function control panel
Navigation system* (if so equipped)
Vehicle information and setting
buttons (P.4-7)
Around View Monitor (if so equipped)
(P.4-30)
6.
Center display (P.4-2)
7.
Clock (P.2-47)
8.
Hazard warning flasher switch (P.2-41)
9.
Front passenger supplemental air bag
(P.1-38)
10.Hood release handle (P.3-19)
11.Fuse box cover (P.8-23)
12.Parking brake (P.5-18)
13.Steering wheel
Horn (P.2-42)
Driver supplement air bag (P.1-38)
14.Push-button ignition switch (P.5-9)
15.Front passenger air bag status light
(P.1-43)
16.Power outlet (P.2-48)
17.Rear window defroster switch (P.2-36)
18.Automatic climate control system
(P.4-42)
19.Audio system (P.4-48)
20.Glove box lid release handle (P.2-51)
*: Refer to the separate Navigation System
Owner
s Manual.
INSTRUMENT PANEL
0-8
Illustrated table of contents
SDI2262
VQ35HR ENGINE
1.
Fuse/fusible link holder (P.8-23)
2.
Battery (P.8-16)
3.
Radiator filler cap (P.8-9)
4.
Engine oil dipstick (P.8-10)
5.
Engine oil filler cap (P.8-10)
6.
Brake fluid reservoir (P.8-15)
7.
Window washer fluid reservoir (P.8-15)
8.
Power steering fluid reservoir (P.8-14)
9.
Air cleaner (P.8-20)
10.Drive belts (P.8-18)
11.Coolant reservoir (P.8-9)
ENGINE COMPARTMENT
0-10
Illustrated table of contents
SDI2264
VK50VE ENGINE
1.
Fuse/fusible link holder (P.8-23)
2.
Battery (P.8-16)
3.
Engine oil filler cap (P.8-10)
4.
Radiator filler cap (P.8-9)
5.
Engine oil dipstick (P.8-10)
6.
Brake fluid reservoir (P.8-15)
7.
Window washer fluid reservoir (P.8-15)
8.
Power steering fluid reservoir (P.8-14)
9.
Air cleaner (P.8-20)
10.Drive belt location (P.8-18)
11.Coolant reservoir (P.8-9)
Illustrated table of contents
0-11
SSI0635
1.
Side ventilator
2.
Paddle shifter (if so equipped)
3.
Meters and gauges
4.
Center ventilator
5.
Center multi-function control panel
Navigation system* (if so equipped)
Vehicle information and setting
buttons
Around View Monitor (if so equipped)
6.
Center display
7.
Clock
8.
Hazard warning flasher switch
9.
Front passenger supplemental air bag
10.Hood release handle
11.Fuse box cover
12.Parking brake
13.Steering wheel
Horn
Driver supplement air bag
14.Push-button ignition switch
15.Front passenger air bag status light
16.Power outlet
17.Rear window defroster switch
18.Automatic climate control system
19.Audio system
20.Glove box lid release handle
*: Refer to the separate Navigation System
Owner
s Manual.
INSTRUMENT PANEL
2-4
Instruments and controls
The power outlet is used for powering
electrical
accessories
such
as
cellular
telephones.
CAUTION
.
The outlet and plug may be hot during
or immediately after use.
.
Do not use with accessories that exceed
a 12 volt, 120W (10A) power draw. Do
not use double adapters or more than
one electrical accessory.
.
Use power outlet with the engine run-
ning to avoid discharging the vehicle
battery.
.
Avoid using power outlet when the air
conditioner, headlights or rear window
defroster is on.
.
This power outlet is not designed for
use with a cigarette lighter unit.
.
Push the plug in as far as it will go. If
good contact is not made, the plug may
overheat
or
the
internal
temperature
fuse may blow.
.
Before
inserting
or
disconnecting
a
plug, be sure the electrical accessory
being used is turned OFF.
.
When not in use, be sure to close the
cap. Do not allow water or any other
liquid to contact the outlet.
CUP HOLDERS
CAUTION
.
Avoid abrupt starting and braking when
the cup holder is being used to prevent
spilling the drink. If the liquid is hot, it
can scald you or your passenger.
.
Use only soft cups in the cup holder.
Hard
objects
can
injure
you
in
an
accident.
.
Do not recline the rear seatback when
you use the cup holders on the rear
armrest. Doing so may cause the bev-
erages to spill over, and if they are hot,
they may scald the passengers.
STORAGE
Instruments and controls
2-49
Initialize entry/exit function
If the battery cable is disconnected, or if
the fuse opens, the entry/exit function will
not work though this function was set on
before. In such a case, after connecting the
battery or replacing with a new fuse, open
and close the driver
s door more than two
times after the ignition switch is turned
from the ON position to the LOCK position.
The entry/exit function will be activated.
SPA2525
SEAT SYNCHRONIZATION FUNCTION
The seat synchronization function automa-
tically adjusts the positions of the steering
wheel and outside mirrors when the seat is
adjusted using the power seat switches.
However, the steering wheel and outside
mirrors will not move if the seat is adjusted
over the maximum thresholds. The system
considers
that
the
steering
wheel
and
outside mirror adjustments are not neces-
sary because the seat may not be adjusted
for
the
driving
position.
Note
that
the
function is set to disabled as the factory
default setting.
The seat synchronization function operates
under the following conditions:
.
The ignition switch is in the ON posi-
tion.
.
The selector lever is in the P (Park)
position.
If the outside mirrors or the steering wheel
reaches
its
maximum
adjustment,
the
function is automatically disabled. Restart
the
function
by
selecting
a
previously
stored seat memory position using the
memory switches (1 or 2). An Intelligent
Key
that
was
previously
linked
to
the
stored seat memory can also be used to
restart the function.
If a seat position was not previously stored
in the seat memory, restart the function by
adjusting the steering wheel and outside
mirrors
manually
for
your
best
driving
position and then drive the vehicle above
4 MPH (7 km/h).
Cancel or activate seat synchroni-
zation function
The selector lever must be in the P (Park)
position with the ignition switch in the ACC
position.
The seat synchronization function can be
activated
or
canceled
by
pushing
and
3-34
Pre-driving checks and adjustments
holding the SET switch for more than 10
seconds while the ignition switch is in the
ACC position.
The
indicator
lights
on
the
memory
switches (1 and 2) will blink once when
the function is canceled, and the indicator
lights will blink twice when the function is
activated. Note that the indicator lights
may
illuminate
after
5
seconds
while
holding
the
SET switch. This
indicates
readiness for linking the Intelligent Key to
a stored memory position. Keep the SET
switch pushed for more than 10 seconds to
turn on or off the seat synchronization
function.
MEMORY STORAGE
Two positions for the driver
s seat, steering
column and outside mirrors can be stored
in the automatic drive positioner memory.
Follow these procedures to use the mem-
ory system.
1.
Move the selector lever to the P (Park)
position.
2.
Push the ignition
switch to the ON
position.
3.
Adjust the driver
s seat, steering col-
umn and outside mirrors to the desired
positions by manually operating each
adjusting switch. For additional infor-
mation, see
SEATS
in the
1. Safety
Seats,
seat
belts
and
supplemental
restraint
system
section
and
TILT/
TELESCOPIC STEERING
earlier in this
section and
OUTSIDE MIRRORS
ear-
lier in this section.
4.
Push
the
SET switch
and,
within
5
seconds, push the memory switch (1
or 2) fully for at least 1 second.
The
indicator
light
for
the
pushed
memory switch will stay on for approxi-
mately 5 seconds after pushing the
switch.
If
memory
is
stored
in
the
same
memory switch, the previous memory
will be deleted.
Linking Intelligent Key to a stored
memory position
The Intelligent Key can be linked to a
stored memory position with the following
procedure.
1.
Follow the steps for storing a memory
position.
2.
While the indicator light for the memory
switch being set is illuminated for 5
seconds, push the
button on the
Intelligent Key. If the indicator light
blinks, the Intelligent Key is linked to
that memory setting.
Push the ignition switch to the OFF posi-
tion, and then push the
button on the
Intelligent Key. The driver
s seat, steering
wheel and outside mirrors will move to the
memorized position or to the exit position
when
the
entry/exit
function
is
set
to
active.
Confirming memory storage
.
Push the ignition
switch to the ON
position and push the SET switch. If the
main memory has not been stored, the
indicator light will come on for approxi-
mately 0.5 second. When the memory
has stored in position, the indicator
light will stay on for approximately 5
seconds.
.
If the battery cable is disconnected, or
if the fuse opens, the memory will be
canceled. In this case, reset the desired
position using the previous procedure.
.
If optional Intelligent Keys are added to
your vehicle, the memory storage pro-
cedure to switch 1 or 2 and linking
Intelligent Key procedure to a stored
memory position should be performed
again
for
each
Intelligent
Key.
For
additional Intelligent Key information,
see
KEYS
earlier in this section.
Pre-driving checks and adjustments
3-35
SCAN tuning:
Push the SCAN tuning button to tune from
low to high frequencies and stop at each
broadcasting
station/channel for
5 sec-
onds. Pushing the button again during this
5 seconds period will stop SCAN tuning
and the radio will remain tuned to that
station/channel.
If the SCAN tuning button is not pushed
within 5 seconds, SCAN tuning moves to
the next station/channel.
*
1
to
*
6
Station memory operations:
12 stations/channels can be set for the FM
band (6 each for FM1 and FM2), 18 for XM
radio (6 each for XM1, XM2 and XM3) and 6
stations can be set for the AM band.
1.
Choose the radio band using the radio
band select button.
2.
Tune
to
the
desired
station/channel
using
the
SEEK·CAT,
TRACK,
SCAN
button or the radio TUNE knob.
3.
Push
and
hold
the
desired
station
preset button
*
1
to
*
6
until the radio
mutes.
4.
The station indicator will then come on
and the sound will resume. Memorizing
is now complete.
5.
Other buttons can be set in the same
manner.
If the battery cable is disconnected, or if
the fuse opens, the radio memory will be
erased. In that case, reset the desired
stations/channels.
List (AM and FM radio) (models with
navigation system):
When the
List
key on the display is
selected while the FM or AM radio is being
played,
the
preset
station
list
will
be
displayed.
If
1
of
the
6
preset
stations
listed
is
touched and held, the current station will
be stored as the new preset.
Menu (XM Satellite Radio) (models with
navigation system):
When the
Menu
key on the display is
selected while the XM Satellite Radio is
being
played,
the
menu
list
will
be
displayed.
The following items are available.
.
Preset List
Displays the preset channel list. If 1 of
the 6 preset stations listed is touched
and held, the current station will be
stored as the new preset.
.
Customize Channel List
Selects specific channels to skip while
using
the
TUNE,
SEEK/CATEGORY or
Menu-Categories feature.
.
Favorite Artists & Songs
Stores the current artist or song that is
being played. Touch the
Alert
key to
be reminded when the stored artist or
song
is
playing
on
a
station
while
listening to XM.
.
Categories
Selecting a category will go to the first
channel in that category as defined by
XM Radio.
.
Direct Tune
Inputs the channel number by using a
keypad.
Text (models without navigation system):
When the
Text
key is selected with the
INFINITI controller on the display and then
the
ENTER
button
is
pushed
while
the
satellite radio is being played, the text
information listed below will be displayed
on the screen.
.
CH Name
.
Category
4-66
Monitor, climate, audio, phone and voice recognition systems
SDI2262
VQ35HR ENGINE
1.
Fuse/fusible link holder
2.
Battery
3.
Radiator filler cap
4.
Engine oil dipstick
5.
Engine oil filler cap
6.
Brake fluid reservoir
7.
Window washer fluid reservoir
8.
Power steering fluid reservoir
9.
Air cleaner
10.Drive belts
11.Coolant reservoir
ENGINE COMPARTMENT CHECK LOCATIONS
8-6
Maintenance and do-it-yourself
SDI2264
1.
Fuse/fusible link holder
2.
Battery
3.
Engine oil filler cap
4.
Radiator filler cap
5.
Engine oil dipstick
6.
Brake fluid reservoir
7.
Window washer fluid reservoir
8.
Power steering fluid reservoir
9.
Air cleaner
10.Drive belt location
11.Coolant reservoir
8-8
Maintenance and do-it-yourself
noise during light to moderate stops is
normal and does not affect the function or
performance of the brake system.
Proper brake inspection intervals should
be followed.
For additional information,
see the maintenance log section of your
INFINITI Service and Maintenance Guide
for maintenance intervals.
SDI1479A
ENGINE COMPARTMENT
CAUTION
Never
use
a
fuse
of
a
higher
or
lower
amperage rating than that specified on the
fuse
box
cover. This
could
damage
the
electrical system or cause a fire.
If
any
electrical
equipment
does
not
operate, check for an open fuse.
1.
Be sure the ignition switch is pushed to
the
OFF
or
LOCK
position
and
the
headlight switch is turned to OFF.
2.
Open the engine hood and remove the
cover on the battery.
3.
Remove
the
fuse/fusible
link
holder
cover.
4.
Remove the fuse with the fuse puller.
FUSES
Maintenance and do-it-yourself
8-23
SDI1754
5.
If the fuse is open
*
A
, replace it with a
new fuse
*
B
. Spare fuses are stored in
the passenger compartment fuse box.
6.
If a new fuse also opens, have the
electrical system checked and repaired
by an INFINITI retailer.
Fusible links
If
any
electrical
equipment
does
not
operate and fuses are in good condition,
check the fusible links. If any of these
fusible links are melted, replace only with
genuine INFINITI parts.
SDI2034
PASSENGER COMPARTMENT
CAUTION
Never
use
a
fuse
of
a
higher
or
lower
amperage rating than that specified on the
fuse
box
cover. This
could
damage
the
electrical system or cause a fire.
If
any
electrical
equipment
does
not
operate, check for an open fuse.
1.
Be sure the ignition switch is pushed to
the
OFF
or
LOCK
position
and
the
headlight switch is turned to OFF.
2.
Open the fuse box lid.
3.
Remove the fuse with the fuse puller
*
A
.
4.
If the fuse is open, replace it with a new
fuse.
5.
If a new fuse also opens, have the
electrical system checked and repaired
by an INFINITI retailer. Spare fuses are
stored in the fuse box.
8-24
Maintenance and do-it-yourself
SDI2704
Extended storage switch (if so
equipped)
If
any
electrical
equipment
does
not
operate,
remove
the
extended
storage
switch and check for an open fuse.
NOTE:
The extended storage switch is used for
long
term
vehicle
storage.
Even
if
the
extended storage switch is broken it is not
necessary to replace it. Replace only the
open fuse in the switch with a new fuse.
How to remove the extended storage
switch:
1.
To remove the extended storage switch,
be sure the ignition switch is in the OFF
or LOCK position.
2.
Be sure the headlight switch is in the
OFF position.
3.
Remove the fuse box cover.
4.
Pinch the locking tabs
*
1
found on
each side of the storage switch.
5.
Pull
the
storage
switch
straight
out
from the fuse box
*
2
.
CAUTION
Be careful not to allow children to swallow
the battery and removed parts.
INTELLIGENT KEY BATTERY REPLACEMENT
Maintenance and do-it-yourself
8-25