Infiniti QX70/FX - 2009 Fuse Box Diagram

Infiniti QX70/FX - 2009 Fuse Box Diagram

SIC3824
1.
Side ventilator (P.4-37)
2.
Paddle shifter (if so equipped) (P.5-15)
3.
Meters and gauges (P.2-5)
4.
Center ventilator (P.4-37)
5.
Center multi-function control panel
Navigation system* (if so equipped)
Vehicle information and setting
buttons (P.4-8)
Bluetooth
®
Hands-Free Phone Sys-
tem (if so equipped) (P.4-85)
Around View Monitor (if so equipped)
(P.4-26)
6.
Center display (P.4-2)
7.
Clock (P.2-48)
8.
Hazard warning flasher switch (P.2-42)
9.
Front passenger supplemental air bag
(P.1-37)
10.Hood release handle (P.3-16)
11.Fuse box cover (P.8-23)
12.Parking brake (P.5-17)
13.Steering wheel
Horn (P.2-43)
Driver supplement air bag (P.1-37)
14.Push-button ignition switch (P.5-9)
15.Front passenger air bag status light
(P.1-43)
16.Power outlet (P.2-49)
17.Rear window defogger switch (P.2-36)
18.CompactFlash card slot (if so equipped)
(P.4-57)
19.Automatic climate control system (P.4-
38)
20.Audio system (P.4-43)
21.Glove box lid release handle (P.2-52)
*: Refer to the separate Navigation System
Owner
s Manual.
INSTRUMENT PANEL
0-8
Illustrated table of contents
SDI2262
VQ35HR ENGINE
1.
Fuse/fusible link holder (P.8-23)
2.
Battery (P.8-16)
3.
Radiator filler cap (P.8-9)
4.
Engine oil dipstick (P.8-10)
5.
Engine oil filler cap (P.8-10)
6.
Brake fluid reservoir (P.8-15)
7.
Window washer fluid reservoir (P.8-15)
8.
Power steering fluid reservoir (P.8-14)
9.
Air cleaner (P.8-20)
10.Drive belts (P.8-18)
11.Coolant reservoir (P.8-9)
ENGINE COMPARTMENT
0-10
Illustrated table of contents
SDI2264
VK50VE ENGINE
1.
Fuse/fusible link holder (P.8-23)
2.
Battery (P.8-16)
3.
Engine oil filler cap (P.8-10)
4.
Radiator filler cap (P.8-9)
5.
Engine oil dipstick (P.8-10)
6.
Brake fluid reservoir (P.8-15)
7.
Window washer fluid reservoir (P.8-15)
8.
Power steering fluid reservoir (P.8-14)
9.
Air cleaner (P.8-20)
10.Drive belt location (P.8-18)
11.Coolant reservoir (P.8-9)
Illustrated table of contents
0-11
SIC3824
1.
Side ventilator
2.
Paddle shifter (if so equipped)
3.
Meters and gauges
4.
Center ventilator
5.
Center multi-function control panel
Navigation system* (if so equipped)
Vehicle information and setting
buttons
Bluetooth
®
Hands-Free Phone Sys-
tem (if so equipped)
Around View Monitor (if so equipped)
6.
Center display
7.
Clock
8.
Hazard warning flasher switch
9.
Front passenger supplemental air bag
10.Hood release handle
11.Fuse box cover
12.Parking brake
13.Steering wheel
Horn
Driver supplement air bag
14.Push-button ignition switch
15.Front passenger air bag status light
16.Power outlet
17.Rear window defogger switch
18.CompactFlash card slot (if so equipped)
19.Automatic climate control system
20.Audio system
21.Glove box lid release handle
*: Refer to the separate Navigation System
Owner
s Manual.
INSTRUMENT PANEL
2-4
Instruments and controls
SIC3631
Front
SIC3834
Center console
SIC3835
Rear console
SIC3836
Cargo area
The power outlet is used for powering
electrical
accessories
such
as
cellular
telephones.
CAUTION
.
The outlet and plug may be hot during
or immediately after use.
.
Do not use with accessories that exceed
a 12 volt, 120W (10A) power draw. Do
not use double adapters or more than
one electrical accessory.
.
Use power outlet with the engine run-
ning to avoid discharging the vehicle
battery.
.
Avoid using power outlet when the air
conditioner, headlights or rear window
defroster is on.
.
This power outlet is not designed for
use with a cigarette lighter unit.
.
Push the plug in as far as it will go. If
good contact is not made, the plug may
overheat
or
the
internal
temperature
fuse may blow.
.
Before
inserting
or
disconnecting
a
plug, be sure the electrical accessory
being used is turned OFF.
.
When not in use, be sure to close the
POWER OUTLET
Instruments and controls
2-49
adjusting switch is operated when the seat
is at the exit position.
Cancel or activate entry/exit func-
tion
The selector lever must be in the P (Park)
position with the ignition switch in the OFF
position.
The entry/exit function can be activated or
canceled by pressing and holding the SET
switch for more than 10 seconds.
The
indicator
lights
on
the
memory
switches (1 and 2) will blink once when
the function is canceled, and the indicator
lights will blink twice when the function is
activated. Note that the indicator lights
may
illuminate
after
5
seconds
while
holding
the
SET switch. This
indicates
readiness for linking the Intelligent Key to
a stored memory position. Keep the SET
switch pressed for more than 10 seconds
to turn on or off the entry/exit function.
The entry/exit function can also be acti-
vated
or
canceled
if
the
Lift
Steering
Wheel on Exit
key or
Slide Driver Seat
Back on Exit
key is turned to ON or OFF in
the
Comfort
&
Conv.
settings.
(See
VEHICLE INFORMATION AND SETTINGS
in
the
4. Monitor, climate, audio, phone and
voice recognition systems
section.)
Initialize entry/exit function
If the battery cable is disconnected, or if
the fuse opens, the entry/exit function will
not work though this function was set on
before. In such a case, after connecting the
battery or replacing with a new fuse, open
and close the driver
s door more than two
times after the ignition switch is turned
from the ON position to the LOCK position.
The entry/exit function will be activated.
SPA2525
SEAT SYNCHRONIZATION FUNCTION
The seat synchronization function automa-
tically adjusts the positions of the steering
wheel and outside mirrors when the seat is
adjusted using the power seat switches.
However, the steering wheel and outside
mirrors will not move if the seat is adjusted
over the maximum thresholds. The system
considers
that
the
steering
wheel
and
outside mirror adjustments are not neces-
sary because the seat may not be adjusted
for
the
driving
position.
Note
that
the
function is set to disabled as the factory
default setting.
The seat synchronization function operates
Pre-driving checks and adjustments
3-25
Push the ignition switch to the OFF posi-
tion, and then push the
button on the
Intelligent Key. The driver
s seat, steering
wheel and outside mirrors will move to the
memorized position or to the exit position
when
the
entry/exit
function
is
set
to
active.
Confirming memory storage
.
Push the ignition
switch to the ON
position and push the SET switch. If the
main memory has not been stored, the
indicator light will come on for approxi-
mately 0.5 second. When the memory
has stored in position, the indicator
light will stay on for approximately 5
seconds.
.
If the battery cable is disconnected, or
if the fuse opens, the memory will be
canceled. In this case, reset the desired
position using the previous procedure.
.
If optional Intelligent Keys are added to
your vehicle, the memory storage pro-
cedure to switch 1 or 2 and linking
Intelligent Key procedure to a stored
memory position should be performed
again
for
each
Intelligent
Key.
For
additional Intelligent Key information,
see
KEYS
earlier in this section.
Selecting the memorized position
1.
Move the selector lever to the P (Park)
position.
2.
Use one of the following methods to
move
the
driver
s
seat,
the
outside
mirrors and the steering wheel.
.
Push the ignition switch to the ON
position
and
push
the
memory
switch (1 or 2) fully for at least 1
second.
.
Within 45 seconds of opening the
driver
s
door,
push
the
memory
switch (1 or 2) fully for at least 1
second.
The driver
s seat, steering column and
outside mirrors will move to the mem-
orized position or to the exit position
when the entry/exit function is set to
active with the indicator light flashing,
and
then the light will
stay
on for
approximately 5 seconds.
SYSTEM OPERATION
The automatic drive positioner system will
not work or will stop operating under the
following conditions:
.
When the vehicle speed is above 4 MPH
(7 km/h).
.
When
the
adjusting
switch
for
the
driver
s seat and steering column is
turned on while the automatic drive
positioner is operating.
.
When the memory switch 1 or 2 is not
pushed for at least 1 second.
.
When the seat, steering column and
outside
mirrors
have
already
been
moved to the memorized position.
.
When
no
position
is
stored
in
the
memory switch.
.
When
the
engine
is
started
while
moving the automatic drive positioner.
.
When the AT selector lever is moved
from the P (Park) position to any other
position.
(However,
it
will
not
be
canceled if the switch is pushed while
the
seat
and
steering
column
are
returning
to
the
previous
positions
(entry/exit function).)
.
When the driver
s door remains open
for
more
than
45
seconds
and
the
ignition switch is not in the ON posi-
tion.
.
The seat synchronization function is
automatically disabled if the outside
mirrors or steering wheel reaches its
maximum adjustment.
Pre-driving checks and adjustments
3-27
.
ANTENNA ERROR (Antenna connection
error)
.
LOADING (When the initial setting is
performed)
.
UPDATING
(When
the
satellite
radio
subscription is not active)
.
INVALID CH (Invalid station is received.)
SCAN tuning:
Push the SCAN tuning button to tune from
low to high frequencies and stops at each
broadcasting station for 5 seconds. Push-
ing the button again during this 5 seconds
period will stop SCAN tuning and the radio
will remain tuned to that station.
If the SCAN tuning button is not pushed
within 5 seconds, SCAN tuning moves to
the next station.
PRESET select:
Push the PRESET select button to go to the
next
PRESET.
After
choosing
from
the
PRESET A, B or C, you can select the
desired station using the INFINITI controller
or pushing the station preset buttons
*
1
to
*
6
.
*
1
to
*
6
Station memory operations:
Six stations can be set for PRESET A, B and
C. The PRESET A, B and C function allows
you to store a combination of FM, AM and
XM stations for easy access.
1.
Choose preset station A, B or C using
the preset select button.
2.
Tune to the desired station using the
SEEK, SCAN or TUNE button.
3.
Select the desired station and keep
pushing
any
of
the
desired
station
preset buttons
*
1
to
*
6
until a beep
sound is heard. (The radio mutes when
the select button is pushed.)
4.
The station indicator will then illumi-
nate
and
the
sound
will
resume.
Memorizing is now complete.
5.
Other buttons can be set in the same
manner.
If the battery cable is disconnected, or if
the fuse blows, the radio memory will be
erased. In that case, reset the desired
stations.
Text:
When the
Text
key is selected with the
INFINITI controller on the display and then
the
ENTER
button
is
pushed
while
the
satellite radio is being played, the text
information
will
be
displayed
on
the
screen.
.
CH Name
.
Category
.
Name
.
Title
.
Other
Compact Disc (CD) player/changer
operation
Push the ignition switch to the ACC or ON
position,
push
the
LOAD
button
(if
so
equipped) and insert the compact disc into
the slot with the label side facing up. The
compact disc will be guided automatically
into the slot and start playing.
After loading the disc, the number of tracks
on the disc and the play time will appear
on the display.
If the radio is already operating, it will
automatically turn off and the compact disc
will play.
If the system has been turned off while the
compact disc was playing, pushing the
ON·OFF/VOL control
knob will start
the
compact disc.
Monitor, climate, audio, phone and voice recognition systems
4-55
SDI2262
VQ35HR ENGINE
1.
Fuse/fusible link holder
2.
Battery
3.
Radiator filler cap
4.
Engine oil dipstick
5.
Engine oil filler cap
6.
Brake fluid reservoir
7.
Window washer fluid reservoir
8.
Power steering fluid reservoir
9.
Air cleaner
10.Drive belts
11.Coolant reservoir
ENGINE COMPARTMENT CHECK LOCATIONS
8-6
Maintenance and do-it-yourself
SDI2264
1.
Fuse/fusible link holder
2.
Battery
3.
Engine oil filler cap
4.
Radiator filler cap
5.
Engine oil dipstick
6.
Brake fluid reservoir
7.
Window washer fluid reservoir
8.
Power steering fluid reservoir
9.
Air cleaner
10.Drive belt location
11.Coolant reservoir
8-8
Maintenance and do-it-yourself
Proper brake inspection intervals should
be followed.
For additional information,
see the maintenance log section of your
INFINITI Service and Maintenance Guide
for maintenance intervals.
SDI1479A
ENGINE COMPARTMENT
CAUTION
Never
use
a
fuse
of
a
higher
or
lower
amperage rating than that specified on the
fuse
box
cover. This
could
damage
the
electrical system or cause a fire.
If
any
electrical
equipment
does
not
operate, check for an open fuse.
1.
Be sure the ignition switch is pushed to
the
OFF
or
LOCK
position
and
the
headlight switch is turned to OFF.
2.
Open the engine hood and remove the
cover on the battery.
3.
Remove
the
fuse/fusible
link
holder
cover.
4.
Remove the fuse with the fuse puller.
FUSES
Maintenance and do-it-yourself
8-23
SDI1754
5.
If the fuse is open
*
A
, replace it with a
new fuse
*
B
. Spare fuses are stored in
the passenger compartment fuse box.
6.
If a new fuse also opens, have the
electrical system checked and repaired
by an INFINITI dealer.
Fusible links
If
any
electrical
equipment
does
not
operate and fuses are in good condition,
check the fusible links. If any of these
fusible links are melted, replace only with
genuine INFINITI parts.
SDI2034
PASSENGER COMPARTMENT
CAUTION
Never
use
a
fuse
of
a
higher
or
lower
amperage rating than that specified on the
fuse
box
cover. This
could
damage
the
electrical system or cause a fire.
If
any
electrical
equipment
does
not
operate, check for an open fuse.
1.
Be sure the ignition switch is pushed to
the
OFF
or
LOCK
position
and
the
headlight switch is turned to OFF.
2.
Open the fuse box lid.
3.
Remove the fuse with the fuse puller
*
A
.
4.
If the fuse is open, replace it with a new
fuse.
5.
If a new fuse also opens, have the
electrical system checked and repaired
by an INFINITI dealer.
8-24
Maintenance and do-it-yourself