Infiniti QX70/FX - 2008 Fuse Box Diagram

Infiniti QX70/FX - 2008 Fuse Box Diagram

19. Lane Departure Warning (LDW) switch
(if so equipped) (P.2-30)
20. Hood release handle (P.3-23)
21. Fuse box (P.8-24)
22. SNOW mode switch (P.2-31)
23. Parking brake (P.5-18)
24. Vehicle Dynamic Control (VDC) OFF
switch (P.2-31)
25. Tilting/telescopic
steering
wheel
switch (P.3-28)
26. Storage
box
and
power
outlet
(P.2-33, P.2-35)
27. Hazard
warning
flasher
switch
(P.2-28)
28. Automatic transmission selector lever
(P.5-15)
29. Heated seat switch (P.2-29)
30. Clock (P.2-32)
31. Automatic climate control system
(P.4-22)
32. Glove box (P.2-36)
*: Refer to the separate Navigation System
Owner’s Manual. (if so equipped)
1. Luggage room light (P.2-49)
2. Rear personal lights (P.2-46)
3. Mobile Entertainment System (MES)*
— Flip-down screen (P.4-58)
— Digital Versatile Disc (DVD) player
(P.4-56)
— DVD remote controller (P.4-57)
— Headphones (P.4-59)
4. Automatic drive positioner switch
(P.3-31)
SSI0324
PASSENGER COMPARTMENT
Illustrated table of contents
0-5
VQ35DE ENGINE
1. Fuse/fusible link holder (P.8-24)
2. Battery (P.8-17)
3. Engine oil filler cap (P.8-13)
4. Brake fluid reservoir (P.8-16)
5. Engine coolant reservoir (P.8-9)
6. Window washer fluid reservoir
(P.8-16)
7. Power steering fluid reservoir (P.8-15)
8. Radiator filler cap (P.8-9)
9. Drive belts (P.8-19)
10. Engine oil dipstick (P.8-11)
11. Air cleaner (P.8-21)
SDI1991
ENGINE COMPARTMENT
0-8
Illustrated table of contents
VK45DE ENGINE
1. Fuse/fusible link holder (P.8-24)
2. Battery (P.8-17)
3. Engine oil filler cap (P.8-13)
4. Brake fluid reservoir (P.8-16)
5. Engine coolant reservoir (P.8-9)
6. Window washer fluid reservoir
(P.8-16)
7. Power steering fluid reservoir (P.8-15)
8. Radiator filler cap (P.8-9)
9. Drive belts (P.8-19)
10. Engine oil dipstick (P.8-11)
11. Air cleaner (P.8-21)
SDI1987
Illustrated table of contents
0-9
1. Outside mirror remote control
2. Headlight, fog light and turn signal
switch
3. Trip odometer reset knob
4. Instrument brightness control switch
5. Headlight aiming control switch
6. Trip odometer select knob
7. Steering switch for Audio/Bluetooth
Hands-Free Phone System
(if so equipped)
8. Security indicator light
9. Meters and gauges
10. Driver supplemental air bag
11. Cruise control main/set switch or In-
telligent cruise control switch (if so
equipped)
12. Windshield wiper/washer switch
13. Ignition switch
14. Center ventilator
15. Display/Navigation system
(if so equipped)*
16. Audio system
17. Center multi-function control panel
18. Front passenger supplemental air bag
19. Lane Departure Warning (LDW) switch
(if so equipped)
20. Hood release handle
21. Fuse box
22. SNOW mode switch
23. Parking brake
SSI0182
INSTRUMENT PANEL
2-2
Instruments and controls
CAUTION
O
The outlet and plug may be hot during or
immediately after use.
O
This power outlet is not designed for use
with a cigarette lighter unit.
O
Do not use with accessories that exceed
a 12 volt, 120W (10A) power draw. Do not
use double adapters or more than one
electrical accessory.
O
Use power outlets with the engine run-
ning to avoid discharging the vehicle
battery.
O
Avoid using power outlets when the air
conditioner,
climate
controlled
seat,
headlights or rear window defroster is
on.
O
Before inserting or disconnecting a plug,
be sure to turn off the power switch of
the electrical accessory being used or
the ACC power of the vehicle.
O
Push the plug in as far as it will go. If
good contact is not made, the plug may
overheat or the internal temperature
fuse may open.
O
When not in use, be sure to close the
cap. Do not allow water to contact the
outlet.
The power outlet is for powering electrical
accessories such as cellular telephones.
SIC2144
Console
POWER OUTLET
Instruments and controls
2-33
4.
Push the SET switch and, within 5 sec-
onds, push the memory switch (1 or 2)
fully for at least 1 second.
The indicator light for the pushed memory
switch will come on and stay on for ap-
proximately 5 seconds after pushing the
switch. After the indicator light goes off,
the selected positions are stored in the
selected memory (1 or 2).
If a new memory is stored in the same
memory switch, the previous memory will
be deleted.
Linking a keyfob or Intelligent Key
to a stored memory position
A keyfob or Intelligent Key can be linked
to a stored memory position with the fol-
lowing procedure.
1.
Follow the steps for storing a memory
position.
2.
While
the
indicator
light
for
the
memory switch being set is illumi-
nated
for
5
seconds,
press
the
button on the keyfob or Intelli-
gent Key. The indicator light will blink.
After the indicator light goes off, the
keyfob or Intelligent Key is linked to
that memory setting.
With the key removed from the ignition
switch,
press
the
button
on
the
keyfob or Intelligent Key. The driver’s
seat, steering wheel and outside mirrors
will move to the memorized position.
Confirming memory storage
O
Turn the ignition ON and push the SET
switch. If the main memory has not
been stored, the indicator light will
come on for approximately 0.5 second.
When the memory has stored the posi-
tion, the indicator light will stay on for
approximately 5 seconds.
O
If the battery cable is disconnected, or
if the fuse opens, the memory will be
canceled. In such a case, reset the de-
sired positions using the following
procedures.
1.
Open and close the driver’s door more
than two times with the ignition key in
the LOCK position.
2.
Reset the desired position using the
previous procedure.
Selecting the memorized position
1.
Set the selector lever to the P (Park)
position.
2.
Use one of the following methods to
move
the
driver’s
seat,
steering
column and outside mirrors.
O
Turn the ignition switch to the ON po-
sition and push the memory switch (1
or 2) fully for at least 1 second.
O
Within 45 seconds after opening the
driver’s door, push the memory switch
(1 or 2) fully for at least 1 second.
The driver’s seat, steering column and
outside mirrors will move to the memo-
rized
position
with
the
indicator
light
flashing, and then the light will stay on
for approximately 5 seconds.
ENTRY/EXIT FUNCTION
This system is designed so that the driv-
er’s seat, steering column and door mir-
rors will automatically move when the au-
tomatic transmission selector lever is in
the P (Park) position. This allows the
driver to get into and out of the driver’s
seat more easily.
3-32
Pre-driving checks and adjustments
The driver’s seat will slide backward and
the steering wheel will move up:
O
When the driver’s door is opened after
removing the key from the ignition
switch or the ignition switch (if so
equipped), or returning the ignition
switch to lock position.
O
When the driver’s door is opened with
the key turned to LOCK.
O
When the key is turned from ACC to
LOCK or returning the ignition switch
to lock position with the driver’s door
open.
The driver’s seat and steering wheel will
return to the previous position:
O
When the key is inserted into the igni-
tion switch or the ignition switch (if so
equipped) is pushed in after closing
the door.
O
When the driver’s door is closed with
the key turned to LOCK.
O
When the key or the ignition switch is
turned from ACC to ON with the driv-
er’s door open.
The entry/exit feature can be adjusted or
canceled.
See
“Vehicle
electronic
sys-
tems” in the “4. Display screen, heater,
air conditioner and audio systems” sec-
tion of this manual.
Initialize entry/exit function
If the battery cable is disconnected, or if
the fuse opens, the entry/exit function
will not work even if it has been set. After
reconnecting the battery or replacing the
fuse, open and close the driver’s door
several times after inserting the electronic
key
into
the
ignition
switch.
The
entry/exit function will be activated.
System operation
The automatic drive positioner system will
not work or will stop operating under the
following conditions:
O
when the vehicle speed is above 4
MPH (7 km/h).
O
when any two or more of the memory
switches are simultaneously pushed
while the automatic drive positioner is
operating.
O
when the adjusting switch for the driv-
er’s seat is turned on while the auto-
matic drive positioner is operating.
O
when the memory switch 1 or 2 is not
pushed for at least 1 second.
O
when
the
seat
has
been
already
moved to the memorized position.
O
when no seat position is stored in the
memory switch.
The automatic drive positioner system can
be adjusted and canceled. See “Auto-
matic seat slide in getting off” and “Lift
steering column when exiting vehicle” in
the “4. Display screen, heater, air condi-
tioner and audio systems” section.
Pre-driving checks and adjustments
3-33
within 5 seconds, SCAN tuning moves to
the next station.
PRESET select:
Push the “PRESET” select button to go
to the next PRESET. After choosing from
the PRESET A, B or C, you can select the
desired station using the INFINITI con-
troller or pushing the station preset but-
tons
to
.
to
Station memory
operations:
Six stations can be set for PRESET A, B
and C. The PRESET A, B and C function al-
lows you to store a combination of FM,
AM and SAT (if so equipped) stations for
easy access.
1.
Choose preset station A, B or C using
the preset select button.
2.
Tune to the desired station using the
“SEEK”, “SCAN” or “TUNE” button.
3.
Select the desired station and keep
pushing any of the desired station
preset buttons
to
until a
beep sound is heard. (The radio mutes
when the select button is pushed.)
4.
The station indicator will then come
on and the sound will resume. Memo-
rizing is now complete.
5.
Other buttons can be set in the same
manner.
If the battery cable is disconnected, or if
the fuse blows, the radio memory will be
erased. In that case, reset the desired
stations.
DISPLAY:
O
By pushing the “DISP” button for more
than 1.5 seconds while receiving FM
radio waves, “PS NAME” switches be-
tween ON and OFF.
O
Pushing the “DISP” button will display
additional information about the satel-
lite
radio
broadcast
(for
example:
Artist name, Title).
Keep pushing the “DISP” button, and
it will change the information of the
satellite radio broadcast to be dis-
played as follows:
CH
Number
CH
Name
Artist
Name
Song Title
CH Number
CATEGORY (CAT):
1.
CAT selection mode
CAT name selection can be done by
turning the TUNE/FOLDER knob in the
CAT selection mode or by using the
INFINITI controller when the CAT list is
displayed on the screen.
2.
CAT SEEK tuning mode
After selecting a CAT name, push the
“SEEK/TRACK” button
or
to
seek the next or previous station in
the selected category.
To seek the first stations listed in each
category, push the “SEEK/TRACK” but-
ton
or
before entering the
CAT select mode.
To cancel the CAT mode, push the
BACK
” button on the INFINITI
controller.
3.
CAT SCAN tuning mode
After selecting a CAT name, push the
“SEEK/TRACK” button for more than
1.5 seconds to scan stations in the
4-36
Display screen, heater, air conditioner and audio systems
VQ35DE ENGINE
1. Fuse/fusible link holder
2. Battery
3. Engine oil filler cap
4. Brake fluid reservoir
5. Engine coolant reservoir
6. Window washer fluid reservoir
7. Power steering fluid reservoir
8. Radiator filler cap
9. Drive belts
10. Engine oil dipstick
11. Air cleaner
SDI1991
ENGINE COMPARTMENT CHECK
LOCATIONS
Maintenance and do-it-yourself
8-7
VK45DE ENGINE
1. Fuse/fusible link holder
2. Battery
3. Engine oil filler cap
4. Brake fluid reservoir
5. Engine coolant reservoir
6. Window washer fluid reservoir
7. Power steering fluid reservoir
8. Radiator filler cap
9. Drive belts
10. Engine oil dipstick
11. Air cleaner
SDI1987
8-8
Maintenance and do-it-yourself
Two types of fuses are used. Type
q
A
is
used in the fuse boxes in the engine com-
partment. Type
q
B
is used in the passen-
ger compartment fuse box.
Type
q
A
fuses
are
provided
as
spare
fuses. They are stored in the passenger
compartment fuse box.
Type
q
A
fuses can be installed in the en-
gine compartment and passenger com-
partment fuse boxes.
If a type
q
A
fuse is used to replace a type
q
B
fuse, the type
q
A
fuse will not be level
with the fuse pocket as shown in the il-
lustration. This will not affect the perfor-
mance of the fuse. Make sure the fuse is
installed in the fuse box securely.
Type
q
B
fuses cannot be installed in the
underhood fuse boxes. Only use type
q
A
fuses in the underhood fuse boxes.
ENGINE COMPARTMENT
CAUTION
Never use a fuse of a higher or lower am-
perage rating than specified on the fuse box
cover. This could damage the electrical
system or cause a fire.
If any electrical equipment does not oper-
ate, check for an open fuse.
1.
Be sure the ignition switch and head-
light switch are OFF.
SDI1751
SDI1752
SDI1479A
FUSES
8-24
Maintenance and do-it-yourself
2.
Open the engine hood and remove the
cover on the compartment of the bat-
tery and the fuse/fusible link holder.
3.
Remove the fuse/fusible link holder
cover by pushing the tab and lifting
the cover up as illustrated.
4.
Remove the fuse with the fuse puller.
The fuse puller is located in the center
of the fuse block in the passenger
compartment.
5.
If the fuse is open
q
A
, replace it with a
new fuse
q
B
.
6.
If a new fuse also opens, have the
electrical
system
checked
and
re-
paired by an INFINITI dealer.
Fusible links
If the electrical equipment does not oper-
ate and the fuses are in good condition,
check the fusible links. If any of these
fusible links are melted, replace with only
genuine NISSAN parts.
SDI1753
Maintenance and do-it-yourself
8-25
PASSENGER COMPARTMENT
CAUTION
Never use a fuse of a higher or lower am-
perage rating than specified on the fuse box
cover. This could damage the electrical
system or cause a fire.
If any electrical equipment does not oper-
ate, check for an open fuse.
1.
Be sure the ignition switch and the
headlight switch are in the OFF posi-
tion.
2.
Open the fuse box lid
q
1
.
3.
Remove the fuse with the fuse puller
q
2
.
4.
If the fuse is open
q
A
, replace it with a
new
fuse
q
B
.
Spare
fuses
q
3
are
stored in the fuse box.
5.
If a new fuse also opens, have the
electrical
system
checked
and
re-
paired by an INFINITI dealer.
SDI1962
SDI1754
8-26
Maintenance and do-it-yourself