Infiniti QX50/EX - 2008 Fuse Box Diagram

Infiniti QX50/EX - 2008 Fuse Box Diagram

1. Side ventilator (P. 4-36)
2. Meters and gauges (P. 2-5)
3. Center ventilator (P. 4-36)
4. Center display (P. 4-2)
5. Clock (P. 2-41)
6. Hazard warning flasher switch (P. 2-37)
7. Center multi-function control panel
— Navigation system* (if so equipped)
— Vehicle information and setting but-
tons (P. 4-9)
— Bluetooth
T
Hands-Free Phone System
(if so equipped) (P. 4-69)
— Around View Monitor (if so equipped)
(P. 4-26)
8. Front passenger supplemental air bag
(P. 1-37)
9. Fuse box cover (P. 8-20)
10. Parking brake (P. 5-14)
11. Push-button ignition switch (P. 5-6)
12. Front passenger air bag status light
(P. 1-42)
13. Power outlet (P. 2-42)
14. Rear window defogger switch (P. 2-31)
15. CompactFlash card slot (if so equipped)
(P. 4-55)
16. Automatic climate control system
(P. 4-37)
17. Audio system (P. 4-43)
18. Glove box lid release handle (P. 2-44)
*: Refer to the separate Navigation System
Owner’s Manual.
SSI0386
INSTRUMENT PANEL
0-8
Illustrated table of contents
VQ35HR ENGINE
1. Fuse/fusible link holder (P. 8-20)
2. Battery (P. 8-13)
3. Radiator filler cap (P. 8-7)
4. Engine oil dipstick (P. 8-8)
5. Engine oil filler cap (P. 8-8)
6. Brake fluid reservoir (P. 8-12)
7. Window washer fluid reservoir (P. 8-12)
8. Power steering fluid reservoir (P. 8-11)
9. Air cleaner (P. 8-16)
10. Drive belts (P. 8-15)
11. Coolant reservoir (P. 8-7)
SSI0388
ENGINE COMPARTMENT
0-10
Illustrated table of contents
1. Side ventilator (P. 4-36)
2. Meters and gauges (P. 2-5)
3. Center ventilator (P. 4-36)
4. Center display (P. 4-2)
5. Clock (P. 2-41)
6. Hazard warning flasher switch (P. 2-37)
7. Center multi-function control panel
— Navigation system* (if so equipped)
— Vehicle information and setting but-
tons (P. 4-9)
— Bluetooth
T
Hands-Free Phone System
(if so equipped) (P. 4-69)
— Around View Monitor (if so equipped)
(P. 4-26)
8. Front passenger supplemental air bag
(P. 1-37)
9. Fuse box cover (P. 8-20)
10. Parking brake (P. 5-14)
11. Push-button ignition switch (P. 5-6)
12. Front passenger air bag status light
(P. 1-42)
13. Power outlet (P. 2-42)
14. Rear window defogger switch (P. 2-31)
15. CompactFlash card slot (if so equipped)
(P. 4-55)
16. Automatic climate control system
(P. 4-37)
17. Audio system (P. 4-43)
18. Glove box lid release handle (P. 2-44)
*: Refer to the separate Navigation System
Owner’s Manual.
SSI0386
INSTRUMENT PANEL
2-4
Instruments and controls
The power outlet is used for powering electrical
accessories such as cellular telephones.
CAUTION
The outlet and plug may be hot during or
immediately after use.
Do not use with accessories that exceed a 12
volt, 120W (10A) power draw. Do not use
double adapters or more than one electrical
accessory.
Use power outlet with the engine running to
avoid discharging the vehicle battery.
Avoid using power outlet when the air condi-
tioner, headlights or rear window defroster
is on.
This power outlet is not designed for use
with a cigarette lighter unit.
Push the plug in as far as it will go. If good
contact is not made, the plug may overheat
or the internal temperature fuse may blow.
Before inserting or disconnecting a plug, be
sure the electrical accessory being used is
turned OFF.
When not in use, be sure to close the cap. Do
not allow water to contact the outlet.
CUP HOLDERS
CAUTION
Avoid abrupt starting and braking when the
cup holder is being used to prevent spilling
the drink. If the liquid is hot, it can scald you
or your passenger.
Use only soft cups in the cup holder. Hard
objects can injure you in an accident.
Center console
SIC3630
Front
SIC3631
POWER OUTLET
STORAGE
2-42
Instruments and controls
Initialize entry/exit function
If the battery cable is disconnected, or if the
fuse opens, the entry/exit function will not work
though this function was set on before. In such
a case, after connecting the battery or replacing
with a new fuse, open and close the driver’s
door more than two times after the ignition
switch is turned from the ON position to the
LOCK position. The entry/exit function will be
activated.
SEAT SYNCHRONIZATION FUNCTION
The seat synchronization function automatically
adjusts the positions of the steering wheel and
outside mirrors when the seat is adjusted using
the power seat switches.
However, the steering wheel and outside mir-
rors will not move if the seat is adjusted over
the maximum thresholds. The system considers
that the steering wheel and outside mirror
adjustments are not necessary because the
seat may not be adjusted for the driving posi-
tion. Note that the function is set to disabled as
the factory default setting.
The seat synchronization function operates un-
der the following conditions:
The ignition switch is in the ON position.
The selector lever is in the P (Park) position.
If the outside mirrors or the steering wheel
reaches its maximum adjustment, the function
is automatically disabled. Restart the function
by selecting a previously stored seat memory
position using the memory switches (1 or 2). An
Intelligent Key that was previously linked to the
stored seat memory can also be used to restart
the function.
If a seat position was not previously stored in
the seat memory, restart the function by adjust-
ing the steering wheel and outside mirrors
manually for your best driving position and then
drive the vehicle above 4 MPH (7 km/h).
Cancel or activate seat
synchronization function
The selector lever must be in the P (Park)
position with the ignition switch in the ACC
position.
The seat synchronization function can be acti-
vated or canceled by pushing and holding the
SET switch for more than 10 seconds while the
ignition switch is in the ACC position.
SPA2469
3-24
Pre-driving checks and adjustments
The indicator lights on the memory switches (1
and 2) will blink once when the function is
canceled, and the indicator lights will blink
twice when the function is activated. Note that
the indicator lights may illuminate after 5 sec-
onds while holding the SET switch. This indi-
cates readiness for linking the Intelligent Key to
a stored memory position. Keep the SET switch
pushed for more than 10 seconds to turn on or
off the seat synchronization function.
MEMORY STORAGE
Two positions for the driver’s seat, steering
column and outside mirrors can be stored in the
automatic
drive
positioner
memory.
Follow
these procedures to use the memory system.
1. Move the selector lever to the P (Park)
position.
2. Push the ignition switch to the ON posi-
tion.
3. Adjust the driver’s seat, steering column
and outside mirrors to the desired posi-
tions by manually operating each adjust-
ing switch. For additional information, see
“SEATS” in the “1. Safety — Seats, seat
belts and supplemental restraint system”
section and “TILTING TELESCOPIC STEER-
ING COLUMN” page 3-18 and “OUTSIDE
MIRRORS” earlier in this section.
4. Push the SET switch and, within 5 sec-
onds, push the memory switch (1 or 2)
fully for at least 1 second.
The indicator light for the pushed memory
switch will stay on for approximately 5 sec-
onds after pushing the switch.
If memory is stored in the same memory
switch, the previous memory will be deleted.
Linking Intelligent Key to a stored
memory position
The Intelligent Key can be linked to a stored
memory position with the following procedure.
1. Follow the steps for storing a memory
position.
2. While the indicator light for the memory
switch being set is illuminated for 5 sec-
onds, push the
button on the Intel-
ligent Key. If the indicator light blinks, the
Intelligent Key is linked to that memory
setting.
Push the ignition switch to the OFF position,
and then push the
button on the Intelli-
gent Key. The driver’s seat, steering wheel and
outside mirrors will move to the memorized
position
or
to
the
exit
position
when
the
entry/exit function is set to active.
Confirming memory storage
Push the ignition switch to the ON position
and push the SET switch. If the main memory
has not been stored, the indicator light will
come
on
for
approximately
0.5
second.
When the memory has stored in position, the
indicator light will stay on for approximately
5 seconds.
If the battery cable is disconnected, or if the
fuse opens, the memory will be canceled. In
this case, reset the desired position using
the previous procedure.
If optional Intelligent Keys are added to your
vehicle, the memory storage procedure to
switch 1 or 2 and linking Intelligent Key
procedure
to
a
stored
memory
position
should be performed again for each Intelli-
gent Key. For additional Intelligent Key infor-
mation, see “KEYS” earlier in this section.
Selecting the memorized position
1. Move the selector lever to the P (Park)
position.
2. Use one of the following methods to move
the driver’s seat, the outside mirrors and
the steering wheel.
Push the ignition switch to the ON position
and push the memory switch (1 or 2) fully for
at least 1 second.
Pre-driving checks and adjustments
3-25
SCAN tuning :
Push the SCAN tuning button to tune from low
to high frequencies and stops at each broad-
casting station for 5 seconds. Pushing the but-
ton again during this 5 seconds period will stop
SCAN tuning and the radio will remain tuned to
that station.
If the SCAN tuning button is not pushed within
5 seconds, SCAN tuning moves to the next
station.
PRESET select :
Push the PRESET select button to go to the next
PRESET. After choosing from the PRESET A, B or
C, you can select the desired station using the
INFINITI controller or pushing the station preset
buttons
s
1
to
s
6
.
s
1
to
s
6
Station memory operations :
Six stations can be set for PRESET A, B and C.
The PRESET A, B and C function allows you to
store a combination of FM, AM and XM stations
for easy access.
1. Choose preset station A, B or C using the
preset select button.
2. Tune to the desired station using the
SEEK, SCAN or TUNE button.
3. Select the desired station and keep push-
ing
any
of
the
desired
station
preset
buttons
s
1
to
s
6
until a beep sound is
heard. (The radio mutes when the select
button is pushed.)
4. The station indicator will then come on
and the sound will resume. Memorizing is
now complete.
5. Other buttons can be set in the same
manner.
If the battery cable is disconnected, or if the
fuse blows, the radio memory will be erased. In
that case, reset the desired stations.
Text :
When
the
“Text”
key
is
selected
with
the
INFINITI controller on the display and then the
ENTER button is pushed while the satellite radio
is being played, the text information will be
displayed on the screen.
CH Name
Category
Name
Title
Other
Compact Disc (CD) player/changer
operation
Push the ignition switch to the ACC or ON
position, push the LOAD button (if so equipped)
and insert the compact disc into the slot with
the label side facing up. The compact disc will
be guided automatically into the slot and start
playing.
After loading the disc, the number of tracks on
the disc and the play time will appear on the
display.
If the radio is already operating, it will automati-
cally turn off and the compact disc will play.
If the system has been turned off while the com-
pact disc was playing, pushing the ON·OFF/VOL
control knob will start the compact disc.
CD LOAD (if so equipped) :
To insert a CD in the CD changer, push the LOAD
button for less than 1.5 seconds. Select the
loading position by pushing the CD insert select
button
s
1
to
s
6
, then insert the CD.
To insert 6 CDs to the CD changer in succession,
push the LOAD button for more than 1.5 seconds.
The inserted slot numbers will illuminate on the
display.
Monitor, climate, audio, phone and voice recognition systems
4-53
VQ35HR ENGINE
1. Fuse/fusible link holder
2. Battery
3. Radiator filler cap
4. Engine oil dipstick
5. Engine oil filler cap
6. Brake fluid reservoir
7. Window washer fluid reservoir
8. Power steering fluid reservoir
9. Air cleaner
10. Drive belts
11. Engine coolant reservoir
SSI0388
ENGINE COMPARTMENT CHECK
LOCATIONS
8-6
Maintenance and do-it-yourself
ENGINE COMPARTMENT
CAUTION
Never use a fuse of a higher or lower amperage
rating than that specified on the fuse box cover.
This could damage the electrical system or
cause a fire.
If any electrical equipment does not operate,
check for an open fuse.
1. Be sure the ignition switch is pushed to
the OFF or LOCK position and the head-
light switch is turned to OFF.
2. Open the engine hood and remove the
cover on the battery.
3. Remove
the
fuse/fusible
link
holder
cover.
4. Remove the fuse with the fuse puller.
5. If the fuse is open
s
A
, replace it with a
new fuse
s
B
. Spare fuses are stored in the
passenger compartment fuse box.
6. If a new fuse also opens, have the elec-
trical system checked and repaired by an
INFINITI dealer.
Fusible links
If any electrical equipment does not operate
and fuses are in good condition, check the
fusible links. If any of these fusible links are
melted,
replace
only
with
genuine
INFINITI
parts.
SDI1479A
SDI1754
FUSES
8-20
Maintenance and do-it-yourself
PASSENGER COMPARTMENT
CAUTION
Never use a fuse of a higher or lower amperage
rating than that specified on the fuse box cover.
This could damage the electrical system or
cause a fire.
If any electrical equipment does not operate,
check for an open fuse.
1. Be sure the ignition switch is pushed to
the OFF or LOCK position and the head-
light switch is turned to OFF.
2. Open the fuse box lid.
3. Remove the fuse with the fuse puller
s
A
.
4. If the fuse is open, replace it with a new
fuse.
5. If a new fuse also opens, have the electri-
cal system checked and repaired by an
INFINITI dealer.
Replace the battery as follows:
1. Release the lock knob at the back of the
Intelligent Key and remove the mechanical
key.
2. Insert
a
flat-blade
screwdriver
s
A
wrapped with a cloth into the slit
s
B
of
the corner and twist it to separate the
upper part from the lower part.
SDI2034
SPA1875
INTELLIGENT KEY BATTERY REPLACEMENT
Maintenance and do-it-yourself
8-21