Infiniti Q70 Hybrid/M Hybrid - 2014 Fuse Box Diagram

Infiniti Q70 Hybrid/M Hybrid - 2014 Fuse Box Diagram

0-8
Illustrated table of contents
JVO0132X
1.
Side ventilator (P.4-33)
2.
Meters and gauges (P.2-6)
3.
Hazard warning flasher switch (P.6-2)
4.
Rear
window
and
outside
mirror
defroster switch (P.2-37)
5.
Center display (P.4-4)/Navigation sys-
tem* (if so equipped)
6.
Clock (P.2-49)
7.
Center multi-function control panel
Navigation
system*
(if
so
equipped)
Vehicle
information
and
setting
buttons (P.4-10)
Bluetooth
®
Hands-Free Phone Sys-
tem (P.4-84, P.4-95)
Audio system (P.4-48)
8.
Automatic climate control system
(P.4-34)/Forest Air
®
system (P.4-34)
9.
Center ventilator (P.4-33)
10. Audio system (P.4-48)
11. Front passenger supplemental air bag
(P.1-37)
12. Hood release handle (P.3-16)
13. Fuse box cover (P.8-24)
14. Parking brake
Parking (P.5-18)
15. Push-button ignition switch (P.5-9)
16. Front passenger air bag status light
(P.1-44)
17. Climate controlled seat switch (if so
equipped) (P.2-46)/Seat heater switch
(if so equipped) (P.2-44)
18. Drive mode select switch (P.5-18)
19. Cigarette lighter and ashtray (P.2-50)
20. Glove box lid release handle (P.2-52)
21. Trunk release power cancel switch
(P.3-18)
*:
Refer
to
the
separate
Navigation
System Owner
s Manual.
INSTRUMENT PANEL
0-10
Illustrated table of contents
JVM0034X
VQ35HR ENGINE
1.
Engine oil filler cap (P.8-12)
2.
Brake fluid reservoir (P.8-16)
3.
Fuse/fusible link holder (P.8-24)
4.
Window washer fluid reservoir
(P.8-17)
5.
Power steering fluid reservoir (P.8-15)
6.
Inverter coolant reservoir (P.8-11)
7.
Air cleaner (P.8-20)
8.
Radiator filler cap (P.8-9)
9.
Engine oil dipstick (P.8-12)
10. Engine coolant reservoir (P.8-9)
ENGINE COMPARTMENT
JVO0132X
1.
Side ventilator (P.4-33)
2.
Meters and gauges (P.2-6)
3.
Hazard warning flasher switch (P.6-2)
4.
Rear
window
and
outside
mirror
defroster switch (P.2-37)
5.
Center display (P.4-4)/Navigation sys-
tem* (if so equipped)
6.
Clock (P.2-49)
7.
Center multi-function control panel
Navigation
system*
(if
so
equipped)
Vehicle
information
and
setting
buttons (P.4-10)
Bluetooth
®
Hands-Free Phone Sys-
tem (P.4-84, P.4-95)
Audio system (P.4-48)
8.
Automatic climate control system
(P.4-34)/Forest Air
®
system* (P.4-34)
9.
Center ventilator (P.4-33)
10. Audio system (P.4-48)
11. Front passenger supplemental air bag
(P.1-37)
12. Hood release handle (P.3-16)
13. Fuse box cover (P.8-24)
14. Parking brake
Parking (P.5-18)
15. Push-button ignition switch (P.5-9)
16. Front passenger air bag status light
(P.1-44)
17. Climate controlled seat switch (if so
equipped) (P.2-46)/Seat heater switch
(if so equipped) (P.2-44)
18. Drive mode select switch (P.5-18)
19. Cigarette lighter and ashtray (P.2-50)
20. Glove box lid release handle (P.2-52)
21. Trunk release power cancel switch
(P.3-18)
*:
Refer
to
the
separate
Navigation
System Owner
s Manual.
Instruments and controls
2-5
INSTRUMENT PANEL
SIC4338
If the power supply is disconnected, the
clock will not indicate the correct time.
Readjust the time.
ADJUSTING THE TIME
1.
To
set
the
clock
forward,
push
the
button
*
1
.
2.
To set the clock backward, push the
button
*
2
.
3.
To move forward or backward faster,
push and hold the button more than 5
seconds.
For details about display clock adjustment
(if so equipped), see
How to use SETTING
button
(P.4-16).
SIC4339
The power outlet is located in the center
console.
CAUTION
.
The outlet and plug may be hot during or
immediately after use.
.
Do not use with accessories that exceed
a 12 volt, 120W (10A) power draw. Do
not use double adapters or more than
one electrical accessory.
.
Use power outlet with the INFINITI Direct
Response Hybrid
®
System running to
avoid
discharging
the
vehicle
12-volt
battery.
.
Avoid using power outlet when the air
conditioner, headlights or rear window
defroster is on.
.
This power outlet is not designed for use
with a cigarette lighter unit.
.
Push the plug in as far as it will go. If
good contact is not made, the plug may
overheat
or
the
internal
temperature
fuse may blow.
.
Before inserting or disconnecting a plug,
be sure the electrical accessory being
used is turned OFF.
.
When not in use, be sure to close the
cap. Do not allow water or any liquid to
contact the outlet.
.
Do not leave the console box open. The
open lid may suddenly close when the
vehicle stops.
Instruments and controls
2-49
CLOCK
POWER OUTLET
The automatic drive positioner system has
four features:
.
Entry/exit function
.
Seat synchronization function
.
Memory storage
.
Setting memory function
ENTRY/EXIT FUNCTION
This system is designed so that the driver
s
seat and steering column will automati-
cally move when the shift lever is in the P
(Park) position. This allows the driver to get
into and out of the driver
s seat more
easily.
The driver
s seat will slide backward and
the steering wheel will move up when the
driver
s door is opened with the ignition
switch in the LOCK position.
The driver
s seat and steering wheel will
return to the previous positions when the
ignition
switch
is
pushed
to
the
ACC
position.
The driver
s seat will not return to the
previous positions if the seat or steering
adjusting switch is operated when the seat
is at the exit position.
Cancel or activate entry/exit func-
tion
The shift lever must be in the P (Park)
position with the ignition switch in the OFF
position.
The entry/exit function can be activated or
canceled by pressing and holding the SET
switch for more than 10 seconds.
The
indicator
lights
on
the
memory
switches (1 and 2) will blink once when
the function is canceled, and the indicator
lights will blink twice when the function is
activated. Note that the indicator lights
may
illuminate
after
5
seconds
while
holding
the
SET switch. This
indicates
readiness for linking the Intelligent Key to
a stored memory position. Keep the SET
switch pressed for more than 10 seconds
to turn on or off the entry/exit function.
The entry/exit function can also be acti-
vated
or
canceled
if
the
Lift
Steering
Wheel on Exit
key or
Slide Driver Seat
Back on Exit
key is turned to ON or OFF in
the
Comfort
settings.
(See
Vehicle
information and settings
(P.4-10).)
Initialize entry/exit function
If the 12-volt battery cable is disconnected,
or if the fuse opens, the entry/exit function
will not work though this function was set
on before. In such a case, after connecting
the 12-volt battery or replacing with a new
fuse, open and close the driver
s door more
than two times after the ignition switch is
turned from the ON position to the LOCK
position. The entry/exit function will be
activated.
Pre-driving checks and adjustments
3-27
AUTOMATIC DRIVE POSITIONER
Linking Intelligent Key to a stored
memory position
The Intelligent Key can be linked to a
stored memory position with the following
procedure.
1.
Follow the steps for storing a memory
position.
2.
While the indicator light for the memory
switch being set is illuminated for 5
seconds, push the
button on the
Intelligent Key. If the indicator light
blinks, the Intelligent Key is linked to
that memory setting.
Push the ignition switch to the OFF posi-
tion, and then push the
button on the
Intelligent Key. The driver
s seat, steering
wheel and outside mirrors will move to the
memorized position.
Confirming memory storage
.
Push
the
ignition
switch
to
the
ON
position and push the SET switch. If
the main memory has not been stored,
the indicator light will come on for
approximately 0.5 second. When the
memory
has stored in position, the
indicator light will stay on for approxi-
mately 5 seconds.
.
If the 12-volt battery cable is discon-
nected,
or
if
the
fuse
opens,
the
memory will be canceled. In this case,
reset the desired position using the
previous procedure.
.
If optional Intelligent Keys are added to
your vehicle, the memory storage pro-
cedure to switch 1 or 2 and linking
Intelligent Key procedure to a stored
memory position should be performed
again
for
each
Intelligent
Key.
For
additional Intelligent Key information,
see
Keys
(P.3-2).
Selecting the memorized position
1.
Move the shift lever to the P (Park)
position.
2.
Use one of the following methods to
move
the
driver
s
seat,
the
outside
mirrors and the steering wheel.
.
Push the memory switch (1 or 2)
fully for at least 1 second.
.
Within 45 seconds of opening the
driver
s
door,
push
the
memory
switch (1 or 2) fully for at least 1
second.
The driver
s seat, steering column
and outside mirrors will move to the
memorized position with the indica-
tor light flashing, and then the light
will
stay
on
for
approximately
5
seconds.
SETTING MEMORY FUNCTION
The status of the following settings can be
linked
to
the
Intelligent
Key
and
the
memorized settings can be available for
each Intelligent Key.
.
Climate control system
.
Navigation system (if so equipped)
.
Audio system
To use the memory function, lock the doors
with the Intelligent Key that is linked to the
settings.
To enable the memorized settings:
1.
Carry the Intelligent Key that is linked
to the settings, and unlock the doors by
pushing the driver
s door handle re-
quest switch or UNLOCK
button on
the Intelligent Key.
2.
Push the ignition switch to the
ON
position.
Connection with the key has
been done
will be displayed on the
screen and the memorized settings are
available (only when a new Intelligent
Key is used).
Pre-driving checks and adjustments
3-29
4-64
Monitor, climate, audio, phone and voice recognition systems
SEEK tuning/CATEGORY (CAT):
.
For AM and FM radio
Push the SEEK button
or
to
tune from low to high or high to low
frequencies and to stop at the next
broadcasting station.
.
SiriusXM Satellite Radio
Push the SEEK button
or
to
tune to the first channel of the next or
previous category.
During satellite radio reception, the follow-
ing notices will be displayed under certain
conditions.
.
NO SIGNAL (No signal is received while
the SAT tuner is connected.)
.
OFF AIR (Broadcasting signed off)
.
CHECK ANTENNA (Antenna connection
error)
.
LOADING (When the initial setting is
performed)
.
UPDATING
(When
the
satellite
radio
subscription is not active)
SCAN tuning:
Push the SCAN tuning button to tune from
low to high frequencies and stop at each
broadcasting station/channel for
5 sec-
onds. Pushing the button again during this
5 seconds period will stop SCAN tuning
and the radio will remain tuned to that
station/channel.
If the SCAN tuning button is not pushed
within 5 seconds, SCAN tuning moves to
the next station/channel.
to
Station memory operations:
12 stations/channels can be set for the FM
band (6 each for FM1 and FM2), 18 for
SiriusXM Satellite Radio (6 each for XM1,
XM2 and XM3) and 6 stations can be set
for the AM band.
1.
Choose the radio band using the radio
band select button.
2.
Tune
to
the
desired
station/channel
using the
, SCAN button or the
radio TUNE knob.
3.
Push
and
hold
the
desired
station
preset button
to
until the radio
mutes.
4.
The station indicator will then come on
and the sound will resume. Memorizing
is now complete.
5.
Other buttons can be set in the same
manner.
If the 12-volt battery cable is disconnected,
or if the fuse opens, the radio memory will
be erased. In that case, reset the desired
stations/channels.
Menu (SiriusXM Satellite Radio) (models
with navigation system):
When the
Menu
key on the display is
selected while the SiriusXM Satellite Radio
is being played, the menu list will be
displayed.
The following items are available.
.
Preset List
Displays the preset channel list. If 1 of
the 6 preset stations listed is touched
and held, the current station will be
stored as the new preset.
.
Customize Channel List
Selects specific channels to skip while
using
the
TUNE,
SEEK/CATEGORY or
Menu-Categories feature.
.
Favorite Artists & Songs
Stores the current artist or song that is
being played. Touch the
Alert
key to
be reminded when the stored artist or
song
is
playing
on
a
station
while
listening to SiriusXM Satellite Radio.
.
Categories
Selecting a category will go to the first
channel in that category as defined by
JVE0010X
WARNING
Always follow the instructions below. Failure
to do so could result in damage to the
charging system and cause personal injury.
1.
If the booster battery is in another
vehicle
*
A
, position the two vehicles
(
*
A
and
*
B
)
to
bring
the
12-volt
battery and fuse box into close proxi-
mity to each other.
Do not allow the two vehicles to touch.
2.
Apply parking brake. Move the shift
lever to the P (Park) position. Switch off
all
unnecessary
electrical
systems
(light, heater, air conditioner, etc.).
3.
Connect jumper cables in the sequence
as illustrated (
*
1
?
*
2
?
*
3
?
*
4
).
For models with a steering wheel lock
mechanism: If the 12-volt battery is
disconnected or discharged, the steer-
ing
wheel
will
lock
and
cannot
be
turned.
Supply
power
using
jumper
cables
before
pushing
the
ignition
switch and disengaging the steering
lock.
CAUTION
.
Always connect positive (+) to positive
(+) and negative (
) to body ground (as
illustrated)
not to the 12-volt battery.
.
Make sure the jumper cables do not
touch moving parts in the engine com-
partment and that clamps do not contact
any other metal.
4.
Start the engine of the booster vehicle
*
A
and let it run for a few minutes.
5.
Start the hybrid system of the vehicle
being jump started
*
B
.
CAUTION
If the hybrid system does not start right
away, push the ignition switch to the OFF
position and wait 10 seconds before trying
again.
6.
After
starting
your
vehicle,
carefully
disconnect the negative cable and then
the positive cable (
*
4
?
*
3
?
*
2
?
*
1
).
In case of emergency
6-11
6-12
In case of emergency
7.
Put the battery cover and fuse cover on.
NOTE:
If it is not possible to turn the hybrid
system ON by following this procedure,
contact an INFINITI retailer immediately.
Do not attempt to start the engine by
pushing.
CAUTION
.
Automatic transmission models cannot
be push-started or tow-started. Attempt-
ing to do so may cause transmission
damage.
.
Three
way
catalyst
equipped
models
should not be started by pushing since
the three way catalyst may be damaged.
.
Never try to start the vehicle by towing
it; when the engine starts, the forward
surge could cause the vehicle to collide
with the tow vehicle.
.
Hybrid models cannot be push-started or
tow-started. Attempting to do so may
cause electrical or transmission damage.
CAUTION
.
Do not continue to drive if your vehicle
overheats. Doing so could cause engine
damage or a vehicle fire.
.
To avoid the danger of being scalded,
never remove the radiator cap while the
engine is still hot. When the radiator cap
is removed, pressurized hot water will
spurt
out,
possibly
causing
serious
injury.
.
Do not open the hood if steam is coming
out.
If your vehicle is overheating (indicated by
an
extremely
high
temperature
gauge
reading), or if you feel a lack of engine
power, detect abnormal noise, etc., take
the following steps:
1.
Move the vehicle safely off the road,
apply the parking brake and move the
shift lever to the P (Park) position.
Do
not
turn
the INFINITI
Direct
Re-
sponse Hybrid
®
System off.
2.
Turn off the climate control. Open all
the windows, move the heater or air
conditioner
temperature
control
to
PUSH STARTING
IF YOUR VEHICLE OVERHEATS
8-8
Maintenance and do-it-yourself
JVM0034X
1.
Engine oil filler cap
2.
Brake fluid reservoir
3.
Fuse/fusible link holder
4.
Window washer fluid reservoir
5.
Power steering fluid reservoir
6.
Inverter coolant reservoir
7.
Air cleaner
8.
Radiator filler cap
9.
Engine oil dipstick
10. Engine coolant reservoir
8-24
Maintenance and do-it-yourself
JVM0055X
JVM0056X
ENGINE COMPARTMENT OR TRUNK
ROOM
CAUTION
Never
use
a
fuse
of
a
higher
or
lower
amperage rating than that specified on the
fuse
box
cover. This
could
damage
the
electrical system or cause a fire.
If
any
electrical
equipment
does
not
operate, check for an open fuse.
1.
Be sure the ignition switch is pushed to
the
OFF
or
LOCK
position
and
the
headlight switch is turned to OFF.
2.
Open the engine hood or trunk lid and
to access the cover on the fuse/fusible
link holder.
3.
Remove
the
fuse/fusible
link
holder
cover.
4.
Remove the fuse with the fuse puller.
SDI1754
5.
If the fuse is open
*
A
, replace it with a
new fuse
*
B
. Spare fuses are stored in
the passenger compartment fuse box.
6.
If a new fuse also opens, have the
electrical system checked and repaired
by an INFINITI retailer.
The holder also contains the fuses. For
checking and/or replacing, see an INFINITI
retailer.
Fusible links
If
any
electrical
equipment
does
not
operate and fuses are in good condition,
check the fusible links. If any of these
fusible links are melted, replace only with
FUSES
genuine INFINITI parts.
SDI2034
PASSENGER COMPARTMENT
CAUTION
Never
use
a
fuse
of
a
higher
or
lower
amperage rating than that specified on the
fuse
box
cover. This
could
damage
the
electrical system or cause a fire.
If
any
electrical
equipment
does
not
operate, check for an open fuse.
1.
Be sure the ignition switch is pushed to
the
OFF
or
LOCK
position
and
the
headlight switch is turned to OFF.
2.
Open the fuse box lid.
3.
Remove the fuse with the fuse puller
*
A
.
4.
If the fuse is open, replace it with a new
fuse.
5.
If a new fuse also opens, have the
electrical system checked and repaired
by an INFINITI retailer. Spare fuses are
stored in the fuse box.
Maintenance and do-it-yourself
8-25
8-26
Maintenance and do-it-yourself
SDI2704
Extended storage fuse switch (if so
equipped)
To
reduce
battery
drain,
the
extended
storage fuse switch comes from the factory
switched
off.
Prior
to
delivery
of
your
vehicle, the switch is pushed in (switched
on) and should always remain on. If any
electrical
equipment
does
not
operate,
remove the extended storage switch and
check for an open fuse.
If
any
electrical
equipment
does
not
operate, remove the extended storage fuse
switch and check for an open fuse.
NOTE:
If the extended storage fuse switch mal-
functions, or if the fuse is open, it is not
necessary to replace the switch. In this
case, remove the extended storage fuse
switch and replace it with a new fuse of
the same rating.
How to remove the extended storage fuse
switch:
1.
To remove the extended storage switch,
be sure the ignition switch is in the OFF
or LOCK position.
2.
Be sure the headlight switch is in the
OFF position.
3.
Remove the fuse box cover.
4.
Pinch the locking tabs
*
1
found on
each side of the storage fuse switch.
5.
Pull the storage fuse switch straight out
from the fuse box
*
2
.
CAUTION
Be careful not to allow children to swallow
the battery and removed parts.
INTELLIGENT KEY BATTERY REPLACEMENT