Infiniti Q70/M - 2008 Fuse Box Diagram

Infiniti Q70/M - 2008 Fuse Box Diagram

1. Side ventilator (P. 4-31)
2. Meters and gauges (P. 2-5)
3. Center ventilator (P. 4-31)
4. Security indicator light (P. 2-26)
5. Hazard warning flasher switch (P. 2-33)
6. Automatic climate control system
(P. 4-32)
7. Center multi-function control panel
— Navigation system* (if so equipped)
(P. 4-4)
— Vehicle information and setting buttons
(P. 4-9)
— Phone system (P. 4-76, P. 4-87)
— Audio system (P. 4-37)
8. Front passenger supplemental air bag
(P. 1-34)
9. Fuse box cover (P. 8-23)
10. Parking brake
— Operation (P. 5-13)
— Parking (P. 5-45)
11. Push-button ignition switch (P. 5-6)
12. Clock (P. 2-38)
13. Climate controlled seat switch (if so
equipped) (P. 2-35)
14. Snow mode switch (if so equipped)
(P. 2-37)
15. Rear sunshade switch (if so equipped)
(P. 2-47)
16. Rear control cancel switch (if so
equipped) (P. 2-47) or Climate con-
trolled seat switch (if so equipped)
(P. 2-35)
17. Climate controlled seat switch (if so
equipped) (P. 2-35)
18. Cigarette lighter and ashtrays (P. 2-39)
19. CompactFlash card slot (if so equipped)
(P. 4-37)
SIC3551
INSTRUMENT PANEL
0-8
Illustrated table of contents
VK45DE ENGINE*
1. Fuse/fusible link holder (P. 8-23)
2. Battery (P. 8-16)
3. Engine oil filler cap (P. 8-11)
4. Brake fluid reservoir (P. 8-15)
5. Window washer fluid reservoir (P. 8-16)
6. Coolant reservoir (P. 8-10)
7. Power steering fluid reservoir (P. 8-15)
8. Radiator filler cap (P. 8-10)
9. Drive belt location (P. 8-18)
10. Engine oil dipstick (P. 8-11)
11. Air cleaner (P. 8-20)
* Shown with the engine compartment access
panels removed. For removal and replacement
instructions,
see
“ENGINE
COMPARTMENT
CHECK LOCATIONS” in the “8. Maintenance
and do-it-yourself” section.
SDI2154
ENGINE COMPARTMENT
0-10
Illustrated table of contents
VQ35DE ENGINE*
1. Fuse/fusible link holder (P. 8-23)
2. Battery (P. 8-16)
3. Engine oil filler cap (P. 8-11)
4. Brake fluid reservoir (P. 8-15)
5. Window washer fluid reservoir (P. 8-16)
6. Coolant reservoir (P. 8-10)
7. Power steering fluid reservoir (P. 8-15)
8. Drive belt location (P. 8-18)
9. Radiator filler cap (P. 8-10)
10. Engine oil dipstick (P. 8-11)
11. Air cleaner (P. 8-20)
* Shown with the engine compartment access
panels removed. For removal and replacement
instructions,
see
“ENGINE
COMPARTMENT
CHECK LOCATIONS” in the “8. Maintenance
and do-it-yourself” section.
SDI2155
Illustrated table of contents
0-11
1. Side ventilator (P. 4-31)
2. Meters and gauges (P. 2-5)
3. Center ventilator (P. 4-31)
4. Security indicator light (P. 2-26)
5. Hazard warning flasher switch (P. 2-33)
6. Automatic climate control system
(P. 4-32)
7. Center multi-function control panel
— Navigation system* (if so equipped)
— Vehicle information and setting but-
tons (P. 4-9)
— Phone system (P. 4-76, P. 4-87)
— Audio system (P. 4-37)
8. Front passenger supplemental air bag
(P. 1-34)
9. Fuse box cover (P. 8-23)
10. Parking brake
— Operation (P. 5-13)
— Parking (P. 5-45)
11. Push-button ignition switch (P. 5-6)
12. Clock (P. 2-38)
13. Climate controlled seat switch (if so
equipped) (P. 2-35)
14. Snow mode switch (if so equipped)
(P. 2-37)
15. Rear sunshade switch (if so equipped)
(P. 2-47)
16. Rear control cancel switch (if so
equipped) (P. 2-47) or Climate con-
trolled seat switch (if so equipped)
(P. 2-35)
17. Climate controlled seat switch (if so
equipped) (P. 2-35)
18. Cigarette lighter and ashtrays (P. 2-39)
SIC3551
INSTRUMENT PANEL
Instruments and controls
2-3
If the power supply is disconnected, the clock
will not indicate the correct time. Readjust the
time.
ADJUSTING THE TIME
1. To set the clock forward, push the button
s
1
.
2. To set the clock backward, push the but-
ton
s
2
.
3. To move forward or backward faster, push
and hold the button more than 5 seconds.
For details about display clock adjustment (if so
equipped), see “HOW TO USE SETTING BUTTON”
in the “4. Monitor, climate, audio, phone and
voice recognition systems” section.
Power outlet is located on the back of the center
console (Model with DVD drive) or in the center
console (Model without DVD drive).
CAUTION
The outlet and plug may be hot during or
immediately after use.
Do not use with accessories that exceed a 12
volt, 120W (10A) power draw. Do not use
double adapters or more than one electrical
accessory.
Use power outlet with the engine running to
avoid discharging the vehicle battery.
Avoid using power outlet when the air condi-
tioner, headlights or rear window defroster
is on.
This power outlet is not designed for use
with a cigarette lighter unit.
Push the plug in as far as it will go. If good
contact is not made, the plug may overheat
or the internal temperature fuse may open.
Before inserting or disconnecting a plug, be
sure the electrical accessory being used is
turned OFF.
When not in use, be sure to close the cap. Do
not allow water to contact the outlet.
SIC2772
Model with DVD drive
SIC2773
Model without DVD drive
SIC2774
CLOCK
POWER OUTLET
2-38
Instruments and controls
The automatic drive positioner system has the
following features:
Entry/exit function
Memory storage
ENTRY/EXIT FUNCTION
This system is designed so that the driver’s seat
and steering column will automatically move
when
the
selector
lever
is
in
the
P
(Park)
position. This allows the driver to get into and
out of the driver’s seat more easily. Note that
the function is set to disabled as the factory
default setting.
The driver’s seat will slide backward and the
steering wheel will move up when the driver’s
door is opened with the ignition switch in the
LOCK position.
The driver’s seat and steering wheel will return
to the previous positions when one of the
following is operated:
When the ignition switch is pushed to the
ACC
position
after
the
driver’s
door
is
closed.
When the ignition switch is pushed to the
ON position.
When the Intelligent Key is inserted into the
port after the driver’s door is closed.
The driver’s seat will not return to the previous
positions
if
the
seat
or
steering
adjusting
switch is operated when the seat is at the exit
position.
Cancel or activate entry/exit function
To cancel or activate the entry/exit function, the
selector lever must be in the P (Park) position
with the ignition switch in the LOCK position.
Push and hold the SET switch for more than 10
seconds to cancel or activate the entry/exit
function.
The indicator lights on the memory switches (1
and 2) will blink once when the function is
canceled, and the indicator lights will blink
twice when the function is activated.
The entry/exit function can also be canceled or
activated if the “Lift Steering Wheel on Exit” key
or “Slide Driver Seat Back on Exit” key is turned
to ON or OFF in the “Comfort & Conv.” settings.
(See “VEHICLE INFORMATION AND SETTINGS” in
the “4. Monitor, climate, audio, phone and
voice recognition systems” section.)
Initialize entry/exit function
If the battery cable is disconnected, or if the
fuse opens, the entry/exit function will not work
though this function was set on before. In such
a case, after connecting the battery or replacing
with a new fuse, open and close the driver’s
door more than two times after the ignition
switch is pushed to the ON position once, then
pushed to the LOCK position. The entry/exit
function will be activated.
AUTOMATIC DRIVE POSITIONER
Pre-driving checks and adjustments
3-25
Linking Intelligent Key to a stored
memory position
The Intelligent Key can be linked to a stored
memory position with the following procedure.
1. Follow the steps for storing a memory
position.
2. While the indicator light for the memory
switch being set is illuminated for 5 sec-
onds, push the
button on the Intel-
ligent Key. If the indicator light blinks, the
Intelligent Key is linked to that memory
setting.
Push the ignition switch to the LOCK position,
and push the
button on the Intelligent
Key. The driver’s seat, steering wheel and out-
side mirrors will move to the memorized posi-
tion.
Confirming memory storage
Push the ignition switch to the ON position
and push the SET switch. If the main memory
has not been stored, the indicator light will
come
on
for
approximately
0.5
second.
When the memory has stored in position, the
indicator light will stay on for approximately
5 seconds.
If the battery cable is disconnected, or if the
fuse opens, the memory will be canceled. In
this case, reset the desired position using
the previous procedure.
If optional Intelligent Keys are added to your
vehicle, perform the memory storage proce-
dure to switch (1 or 2) and linking Intelligent
Key procedure to a stored memory position
again for each Intelligent Key. For additional
Intelligent Key information, see “KEYS” ear-
lier in this section.
Selecting the memorized position
1. Move the selector lever to the P (Park)
position.
2. Use one of the following methods to move
the driver’s seat, steering column and
outside mirrors.
Push the ignition switch to the ON position
and push the memory switch (1 or 2) fully for
at least 1 second.
Within 45 seconds after opening the driver’s
door, push the memory switch (1 or 2) fully
for at least 1 second.
The driver’s seat, steering column and out-
side mirrors will move to the memorized
position with the indicator light flashing,
and then the light will stay on for approxi-
mately 5 seconds.
SYSTEM OPERATION
The automatic drive positioner system will not
work or will stop operating under the following
conditions:
When the vehicle speed is above 4 MPH (7
km/h).
When the adjusting switch for the driver’s
seat and steering column is turned on while
the automatic drive positioner is operating.
When the memory switch (1 or 2) is not
pushed for at least 1 second.
When the seat, steering column and outside
mirrors have already been moved to the
memorized position.
When no position is stored in the memory
switch.
When the engine is started while the auto-
matic drive positioner is operating.
When
approximately
45
seconds
have
passed after the driver’s door was opened
(ignition switch is not in the ON position).
When the selector lever is moved from the P
(Park) position to any other position. (How-
ever, it will not be canceled if the switch is
pushed while the seat and steering column
are
returning
to
the
previous
positions
(entry/exit function).)
Pre-driving checks and adjustments
3-27
OFF AIR (Broadcasting signed off)
ANTENNA ERROR (Antenna connection error)
LOADING (When the initial setting is per-
formed)
UPDATING (When the satellite radio sub-
scription is not active)
INVALID CH (Invalid station is received.)
SCAN tuning :
Push the SCAN tuning button to tune from low
to high frequencies and stops at each broad-
casting station for 5 seconds. Pushing the but-
ton again during this 5 seconds period will stop
SCAN tuning and the radio will remain tuned to
that station.
If the SCAN tuning button is not pushed within
5 seconds, SCAN tuning moves to the next
station.
PRESET select :
Push the PRESET select button to go to the next
PRESET. After choosing from the PRESET A, B or
C, you can select the desired station using the
INFINITI controller or pushing the station preset
buttons
to
.
to
Station memory operations :
6 stations can be set for PRESET A, B and C. The
PRESET A, B and C function allows you to store
a combination of FM, AM and SAT stations for
easy access.
1. Choose preset station A, B or C using the
preset select button.
2. Tune to the desired station using the
SEEK, SCAN or TUNE button.
3. Select the desired station and keep push-
ing
any
of
the
desired
station
preset
buttons
to
until
a
beep
sound is heard. (The radio mutes when
the select button is pushed.)
4. The station indicator will then come on
and the sound will resume. Memorizing is
now complete.
5. Other buttons can be set in the same
manner.
If the battery cable is disconnected, or if the
fuse opens, the radio memory will be erased. In
that case, reset the desired stations.
Text :
When the “
Text
” key is selected with the
INFINITI controller on the display and then the
ENTER
button is pushed while the satellite radio
is being played, the text information will be
displayed on the screen.
CH Name
Category
Name
Title
Other
If your vehicle is equipped with the
AUDIO TEXT
” button on the center multi-function
control panel, push this button while the satel-
lite programming is selected to show the text
information.
Compact Disc (CD) player/changer
operation
Push the ignition switch to the ACC or ON
position, push the LOAD button (if so equipped)
and insert the Compact Disc (CD) into the slot
with the label side facing up. The CD will be
guided automatically into the slot and start
playing.
After loading the CD, the number of tracks on
the CD and the play time will appear on the
display.
If the radio is already operating, it will automati-
cally turn off and the CD will play.
Monitor, climate, audio, phone and voice recognition systems
4-47
1. Fuse/fusible link holder
2. Battery
3. Engine oil filler cap
4. Brake fluid reservoir
5. Window washer fluid reservoir
6. Engine coolant reservoir
7. Power steering fluid reservoir
8. Radiator filler cap
9. Drive belt location
10. Engine oil dipstick
11. Air cleaner
SDI2154
Maintenance and do-it-yourself
8-7
1. Fuse/fusible link holder
2. Battery
3. Engine oil filler cap
4. Brake fluid reservoir
5. Window washer fluid reservoir
6. Engine coolant reservoir
7. Power steering fluid reservoir
8. Drive belt location
9. Radiator filler cap
10. Engine oil dipstick
11. Air cleaner
SDI2155
Maintenance and do-it-yourself
8-9
If the brakes do not operate properly, have the
brakes checked by an INFINITI dealer.
SELF-ADJUSTING BRAKES
Your vehicle is equipped with self-adjusting
brakes.
The disc-type brakes self-adjust every time the
brake pedal is applied.
WARNING
See an INFINITI dealer for a brake system check
if the brake pedal height does not return to
normal.
BRAKE PAD WEAR INDICATORS
The
disc
brake
pads
on
your
vehicle
have
audible wear indicators. When a brake pad
requires
replacement,
it
will
make
a
high
pitched scraping or screeching sound when the
vehicle is in motion. The sound will be heard
whether or not the brake pedal is depressed.
Have the brakes checked as soon as possible if
the wear indicator sound is heard.
Under some driving or climate conditions, occa-
sional brake squeak, squeal or other noise may
be heard. Occasional brake noise during light to
moderate stops is normal and does not affect
the function or performance of the brake sys-
tem.
Proper brake inspection intervals should be fol-
lowed.
For additional information, see the main-
tenance log section of your “INFINITI Service
and Maintenance Guide”.
Some vehicles are equipped with engine com-
partment
and
passenger
compartment
fuse
boxes that use only type
s
A
fuses. Other ve-
hicles are equipped with type
s
A
fuses in the
engine compartment fuse box and type
s
B
fuses in the passenger compartment fuse box.
Type
s
A
fuses are provided as spare fuses. They
are stored in the passenger compartment fuse
box.
Type
s
A
fuses can be installed in the engine
compartment and passenger compartment fuse
boxes.
SDI1751
BRAKES
FUSES
Maintenance and do-it-yourself
8-23
If a type
s
A
fuse is used to replace a type
s
B
fuse, the type
s
A
fuse will not be level with the
fuse pocket as shown in the illustration. This
will not affect the performance of the fuse.
Make sure the fuse is installed in the fuse box
securely.
Type
s
B
fuses cannot be installed in the under-
hood fuse boxes. Only use type
s
A
fuses in the
underhood fuse boxes.
ENGINE COMPARTMENT
CAUTION
Never use a fuse of a higher or lower amperage
rating than that specified on the fuse box cover.
This could damage the electrical system or
cause a fire.
If any electrical equipment does not operate,
check for an open fuse.
1. Be sure the ignition switch is pushed to
the
LOCK
position
and
the
headlight
switch is turned off.
2. Open the engine hood and remove the
cover on the battery and the fuse/fusible
link holder.
3. Remove
the
fuse/fusible
link
holder
cover.
4. Remove the fuse with the fuse puller.
SDI1752
SDI1479A
8-24
Maintenance and do-it-yourself
5. If the fuse is open
s
A
, replace it with a
new fuse
s
B
. Spare fuses are stored in the
passenger compartment fuse box.
6. If a new fuse also opens, have the elec-
trical system checked and repaired by an
INFINITI dealer.
Fusible links
If any electrical equipment does not operate
and fuses are in good condition, check the
fusible links. If any of these fusible links are
melted,
replace
only
with
genuine
INFINITI
parts.
PASSENGER COMPARTMENT
CAUTION
Never use a fuse of a higher or lower amperage
rating than that specified on the fuse box cover.
This could damage the electrical system or
cause a fire.
If any electrical equipment does not operate,
check for an open fuse.
1. Be sure the ignition switch is pushed to
the
LOCK
position
and
the
headlight
switch is turned off.
2. Open the fuse box lid.
3. Remove the fuse with the fuse puller
s
A
.
SDI1753
SDI1833
Maintenance and do-it-yourself
8-25
4. If the fuse is open
s
A
, replace it with a
new fuse
s
B
.
5. If a new fuse also opens, have the electri-
cal system checked and repaired by an
INFINITI dealer.
CAUTION
Be careful not to allow children to swallow the
battery and removed parts.
INTELLIGENT KEY
Replace the battery as follows:
1. Release the lock knob at the back of the
Intelligent Key and remove the mechanical
key.
2. Insert
a
flat-blade
screwdriver
s
A
wrapped with a cloth into the slit
s
B
of
the corner and twist it to separate the
upper part from the lower part.
SDI1754
SDI1834
BATTERY REPLACEMENT
8-26
Maintenance and do-it-yourself