Infiniti Q60/G Coupe - 2014 Fuse Box Diagram

Infiniti Q60/G Coupe - 2014 Fuse Box Diagram

0-8
Illustrated table of contents
SSI0671
1.
Side ventilator (P.4-30)
2.
Meters and gauges (P.2-6)
3.
Center ventilator (P.4-30)
4.
Audio system (P.4-39)
5.
Clock (P.2-42)
6.
Center multi-function control panel
(P.4-3)
Navigation
system*
(if
so
equipped)
Vehicle
information
and
setting
buttons (P.4-9)
Bluetooth
®
Hands-Free Phone Sys-
tem (P.4-77, P.4-87)
Audio system (P.4-39)
7.
Center display (P.4-3)/Navigation sys-
tem* (if so equipped)
8.
Hazard warning flasher switch (P.6-2)
9.
Front passenger supplemental air bag
(P.1-38)
10. Fuse box cover (P.8-23)
11. Parking brake (for Automatic Trans-
mission models)
Parking (P.5-21)
12. Push-button ignition switch (P.5-9)
13. Automatic climate control system
(P.4-31)
14. Cigarette lighter and ashtray (if so
equipped) (P.2-43) or storage box (if
so equipped) (P.2-49)
Power outlet (if so equipped)
(P.2-42)
15. Parking brake (for Manual Transmis-
sion models)
Parking (P.5-21)
16. Heated seat switch (P.2-39)
17. SNOW mode switch (if so equipped)
(P.2-41)
18. Rear window and outside mirror (if so
equipped) defroster switch (P.2-34)
INSTRUMENT PANEL
JVC0332X
VQ37VHR ENGINE
1.
Fuse/fusible link holder (P.8-23)
2.
Battery (P.8-15)
3.
Engine oil filler cap (P.8-10)
4.
Brake fluid reservoir (P.8-13)
5.
Clutch fluid reservoir (Manual Trans-
mission models) (P.8-13)
6.
Window washer fluid reservoir
(P.8-14)
7.
Power steering fluid reservoir (P.8-13)
8.
Air cleaner (P.8-20)
9.
Radiator filler cap (P.8-8)
10. Drive belts (P.8-18)
11. Coolant reservoir (P.8-8)
12. Engine oil dipstick (P.8-10)
Illustrated table of contents
0-11
ENGINE COMPARTMENT
2-4
Instruments and controls
SSI0671
1.
Side ventilator (P.4-30)
2.
Meters and gauges (P.2-6)
3.
Center ventilator (P.4-30)
4.
Audio system (P.4-39)
5.
Clock (P.2-42)
6.
Center multi-function control panel
(P.4-3)
Navigation
system*
(if
so
equipped)
Vehicle
information
and
setting
buttons (P.4-9)
Bluetooth
®
Hands-Free Phone Sys-
tem (P.4-77, P.4-87)
Audio system (P.4-39)
7.
Center display (P.4-3)/Navigation sys-
tem* (if so equipped)
8.
Hazard warning flasher switch (P.6-2)
9.
Front passenger supplemental air bag
(P.1-38)
10. Fuse box cover (P.8-23)
11. Parking brake (for Automatic Trans-
mission models)
Parking (P.5-21)
12. Push-button ignition switch (P.5-9)
13. Automatic climate control system
(P.4-31)
14. Cigarette lighter and ashtray (if so
equipped) (P.2-43) or storage box (if
so equipped) (P.2-49)
Power outlet (if so equipped)
(P.2-42)
15. Parking brake (for Manual Transmis-
sion models)
Parking (P.5-21)
16. Heated seat switch (P.2-39)
17. SNOW mode switch (if so equipped)
(P.2-41)
18. Rear window and outside mirror (if so
equipped) defroster switch (P.2-34)
INSTRUMENT PANEL
.
Avoid using power outlet when the air
conditioner, headlights or rear window
defroster is on.
.
This power outlet is not designed for use
with a cigarette lighter unit.
.
Push the plug in as far as it will go. If
good contact is not made, the plug may
overheat
or
the
internal
temperature
fuse may blow.
.
Before inserting or disconnecting a plug,
be sure the electrical accessory being
used is turned OFF.
.
When not in use, be sure to close the
cap. Do not allow water or any liquid to
contact the outlet.
SIC3219
FRONT
To open the ashtray lid, push the lid down
and release it
*
1
.
To empty the ashtray, pull out
*
2
.
The cigarette lighter operates when the
ignition switch is in the ON position.
Push the lighter in all the way
*
3
, then
release it. When the lighter is heated, it will
spring out. Return the lighter to its original
position after use.
CAUTION
.
The cigarette lighter socket is a power
source for the cigarette lighter element
only. The use of the cigarette lighter
socket as a power source for any other
accessory is not recommended.
.
Do not use any other power outlet for an
accessory lighter.
Instruments and controls
2-43
CIGARETTE LIGHTER AND ASHTRAYS (if so
equipped)
3-30
Pre-driving checks and adjustments
approximately 0.5 second. When the
memory
has stored in position, the
indicator light will stay on for approxi-
mately 5 seconds.
.
If the battery cable is disconnected, or if
the fuse opens, the memory will be
canceled. In this case, reset the desired
position using the previous procedure.
.
If optional Intelligent Keys are added to
your vehicle, the memory storage pro-
cedure to switch 1 or 2 and linking
Intelligent Key procedure to a stored
memory position should be performed
again
for
each
Intelligent
Key.
For
additional Intelligent Key information,
see
Keys
(P.3-2).
Selecting the memorized position
1.
Automatic transmission models:
Move the shift lever to the P (Park)
position.
Manual transmission models:
Apply the parking brake.
2.
Raise the seatback.
3.
Use one of the following methods to
move
the
driver
s
seat,
the
outside
mirrors and the steering wheel.
.
Push the ignition switch to the ON
position
and
push
the
memory
switch (1 or 2) fully for at least 1
second.
.
Within 45 seconds of opening the
driver
s
door,
push
the
memory
switch (1 or 2) fully for at least 1
second.
The driver
s seat, steering column
and outside mirrors will move to the
memorized position with the indica-
tor light flashing, and then the light
will
stay
on
for
approximately
5
seconds.
For
manual
transmission
models,
the
memory positions can be selected even
when the engine is running. In this case,
move the shift lever to the N (Neutral)
position
and
apply
the
parking
brake.
Then, perform step 2.
SYSTEM OPERATION
The automatic drive positioner system will
not work or will stop operating under the
following conditions:
.
When the vehicle speed is above 4 MPH
(7 km/h).
.
When
the
adjusting
switch
for
the
driver
s seat and steering column is
turned on while the automatic drive
positioner is operating.
.
When the memory switch 1 or 2 is not
pushed for at least 1 second.
.
When the seat, steering column and
outside
mirrors
have
already
been
moved to the memorized position.
.
When
no
position
is
stored
in
the
memory switch.
.
When the parking brake is released (MT
models).
.
When the speed is above 4 MPH (7
km/h)
while
the
parking
brake
is
applied (MT models).
To restart the drive positioner system,
move the parking brake to off and on.
.
When
the
engine
is
started
while
moving the automatic drive positioner.
.
When the AT shift lever is moved from
the
P
(Park)
position
to
any
other
position.
.
When the driver
s door remains open
for
more
than
45
seconds and
the
ignition switch is not in the ON posi-
tion.
.
When the seatback is folded.
.
While the walk-in function operates.
.
The
seat
synchronization
function
is
automatically disabled if the outside
Forward or Rewind to tune from low to
high or high to low frequencies and to
stop at the next broadcasting station.
.
For SiriusXM Satellite Radio
Push the SEEK·CAT or TRACK button
Forward or Rewind to tune to the first
channel of the next or previous cate-
gory.
During satellite radio reception, the follow-
ing notices will be displayed under certain
conditions.
.
NO SIGNAL (No signal is received while
the SAT tuner is connected.)
.
OFF AIR (Broadcasting signed off)
.
CHECK ANTENNA (Antenna connection
error)
.
LOADING (When the initial setting is
performed)
.
UPDATING
(When
the
satellite
radio
subscription is not active)
SCAN tuning:
Push the SCAN tuning button to tune from
low to high frequencies and stop at each
broadcasting station/channel for
5 sec-
onds. Pushing the button again during this
5 seconds period will stop SCAN tuning
and the radio will remain tuned to that
station/channel.
If the SCAN tuning button is not pushed
within 5 seconds, SCAN tuning moves to
the next station/channel.
*
1
to
*
6
Station memory operations:
12 stations/channels can be set for the FM
band (6 each for FM1 and FM2), 18 for
SiriusXM Satellite Radio (6 each for XM1,
XM2 and XM3) and 6 stations can be set
for the AM band.
1.
Choose the radio band using the radio
band select button.
2.
Tune
to
the
desired
station/channel
using
the
SEEK·CAT,
TRACK,
SCAN
button or the radio TUNE knob.
3.
Push
and
hold
the
desired
station
preset button
*
1
to
*
6
until the radio
mutes.
4.
The station indicator will then come on
and the sound will resume. Memorizing
is now complete.
5.
Other buttons can be set in the same
manner.
If the battery cable is disconnected, or if
the fuse opens, the radio memory will be
erased. In that case, reset the desired
stations/channels.
List (AM and FM radio) (models with
navigation system):
When the
List
key on the display is
selected while the FM or AM radio is being
played,
the
preset
station
list
will
be
displayed.
If
1
of
the
6
preset
stations
listed
is
touched and held, the current station will
be stored as the new preset.
Menu (SiriusXM Satellite Radio) (models
with navigation system):
When the
Menu
key on the display is
selected while the SiriusXM Satellite Radio
is being played, the menu list will be
displayed.
The following items are available.
.
Preset List
Displays the preset channel list. If 1 of
the 6 preset stations listed is touched
and held, the current station will be
stored as the new preset.
.
Customize Channel List
Selects specific channels to skip while
using
the
TUNE,
SEEK/CATEGORY or
Menu-Categories feature.
.
Favorite Artists & Songs
Stores the current artist or song that is
Monitor, climate, audio, phone and voice recognition systems
4-55
JVC0332X
VQ37VHR ENGINE
1.
Fuse/fusible link holder
2.
Battery
3.
Engine oil filler cap
4.
Brake fluid reservoir
5.
Clutch fluid reservoir (Manual Trans-
mission models)
6.
Window washer fluid reservoir
7.
Power steering fluid reservoir
8.
Air cleaner
9.
Radiator filler cap
10. Drive belts
11. Engine coolant reservoir
12. Engine oil dipstick
Maintenance and do-it-yourself
8-7
ENGINE COMPARTMENT CHECK LOCATIONS
SDI1479A
ENGINE COMPARTMENT
CAUTION
Never
use
a
fuse
of
a
higher
or
lower
amperage rating than that specified on the
fuse
box
cover. This
could
damage
the
electrical system or cause a fire.
If
any
electrical
equipment
does
not
operate, check for an open fuse.
1.
Be sure the ignition switch is pushed to
the
OFF
or
LOCK
position
and
the
headlight switch is turned to OFF.
2.
Open the engine hood and remove the
cover on the battery and the fuse/
fusible link holder.
3.
Remove
the
fuse/fusible
link
holder
cover.
4.
Remove the fuse with the fuse puller.
SDI1754
5.
If the fuse is open
*
A
, replace it with a
new fuse
*
B
. Spare fuses are stored in
the passenger compartment fuse box.
6.
If a new fuse also opens, have the
electrical system checked and repaired
by an INFINITI retailer.
Fusible links
If
any
electrical
equipment
does
not
operate and fuses are in good condition,
check the fusible links. If any of these
fusible links are melted, replace only with
genuine INFINITI parts.
Maintenance and do-it-yourself
8-23
FUSES
8-24
Maintenance and do-it-yourself
SDI2034
PASSENGER COMPARTMENT
CAUTION
Never
use
a
fuse
of
a
higher
or
lower
amperage rating than that specified on the
fuse
box
cover. This
could
damage
the
electrical system or cause a fire.
If
any
electrical
equipment
does
not
operate, check for an open fuse.
1.
Be sure the ignition switch is pushed to
the
OFF
or
LOCK
position
and
the
headlight switch is turned to OFF.
2.
Open the fuse box lid.
3.
Remove the fuse with the fuse puller
*
A
.
4.
If the fuse is open, replace it with a new
fuse.
5.
If a new fuse also opens, have the
electrical system checked and repaired
by an INFINITI retailer. Spare fuses are
stored in the fuse box.
SDI2704
Extended storage fuse switch (if so
equipped)
To
reduce
battery
drain,
the
extended
storage fuse switch comes from the factory
switched
off.
Prior
to
delivery
of
your
vehicle, the switch is pushed in (switched
on) and should always remain on.
If
any
electrical
equipment
does
not
operate, remove the extended storage fuse
switch and check for an open fuse.
NOTE:
If the extended storage fuse switch mal-
functions, or if the fuse is open, it is not
necessary to replace the switch. In this
case, remove the extended storage fuse
switch and replace it with a new fuse of
the same rating.
How to remove the extended storage fuse
switch:
1.
To remove the extended storage fuse
switch, be sure the ignition switch is in
the OFF or LOCK position.
2.
Be sure the headlight switch is in the
OFF position.
3.
Remove the fuse box cover.
4.
Pinch the locking tabs
*
1
found on
each side of the extended storage fuse
switch.
5.
Pull the extended storage fuse switch
straight out from the fuse box
*
2
.
CAUTION
Be careful not to allow children to swallow
the battery and removed parts.
SDI1834
Replace the battery as follows:
1.
Release the lock knob at the back of the
Intelligent Key and remove the mechan-
ical key.
2.
Insert
a
flat-blade
screwdriver
*
A
wrapped with a cloth into the slit
*
B
of the corner and twist it to separate
the upper part from the lower part.
Maintenance and do-it-yourself
8-25
INTELLIGENT KEY BATTERY REPLACEMENT