Infiniti Q60/G Coupe - 2013 Fuse Box Diagram

Infiniti Q60/G Coupe - 2013 Fuse Box Diagram

GUID-5BF1CCAC-1271-471E-83A1-FF109419BE46
SSI0671
1.
Side ventilator (P.4-30)
2.
Meters and gauges (P.2-6)
3.
Center ventilator (P.4-30)
4.
Audio system (P.4-41)
5.
Clock (P.2-43)
6.
Center multi-function control panel
Navigation
system*
(if
so
equipped)
Vehicle
information
and
setting
buttons (P.4-9)
Bluetooth
®
Hands-Free Phone Sys-
tem (if so equipped) (P.4-85, P.4-96)
Audio system (P.4-41)
7.
Center display (P.4-3)/Navigation sys-
tem* (if so equipped)
8.
Hazard warning flasher switch (P.2-39)
9.
Front passenger supplemental air bag
(P.1-42)
10. Fuse box cover (P.8-24)
11. Parking brake (for Automatic Trans-
mission models)
Parking (P.5-21)
12. Push-button ignition switch (P.5-9)
13. Automatic climate control system
(P.4-31)
14. Cigarette lighter and ashtray (if so
equipped) (P.2-44) or storage box (if
so equipped) (P.2-50)
Power outlet (if so equipped)
(P.2-43)
15. Parking brake (for Manual Transmis-
sion models)
Parking (P.5-21)
16. Heated seat switch (if so equipped)
(P.2-40)
17. SNOW mode switch (if so equipped)
(P.2-42)
18. Rear window and outside mirror (if so
equipped) defroster switch (P.2-34)
Illustrated table of contents
0-11
INSTRUMENT PANEL
0-14
Illustrated table of contents
GUID-4EFFD432-519B-49EA-B9D3-B7E9FD7A6615
SDI2709
VQ25HR/VQ37VHR ENGINE
GUID-2D649F04-F3DE-4C0A-877A-1F56F5C15998
1.
Fuse/fusible link holder (P.8-24)
2.
Battery (P.8-17)
3.
Engine oil filler cap (P.8-11)
4.
Brake fluid reservoir (P.8-15)
5.
Clutch fluid reservoir (Manual Trans-
mission models) (P.8-15)
6.
Window washer fluid reservoir
(P.8-16)
7.
Power steering fluid reservoir (P.8-14)
8.
Air cleaner (P.8-21)
9.
Radiator filler cap (P.8-9)
10. Drive belts (P.8-19)
11. Coolant reservoir (P.8-9)
12. Engine
oil
dipstick
(for
VQ37VHR
engine model) (P.8-11)
13. Engine oil dipstick (for VQ25HR en-
gine model) (P.8-11)
ENGINE COMPARTMENT
2-4
Instruments and controls
GUID-F966D69B-15F8-48D0-A86B-A60F682B16E9
SSI0671
1.
Side ventilator (P.4-30)
2.
Meters and gauges (P.2-6)
3.
Center ventilator (P.4-30)
4.
Audio system (P.4-41)
5.
Clock (P.2-43)
6.
Center multi-function control panel
Navigation
system*
(if
so
equipped)
Vehicle
information
and
setting
buttons (P.4-9)
Bluetooth
®
Hands-Free Phone Sys-
tem (if so equipped) (P.4-85, P.4-96)
Audio system (P.4-41)
7.
Center display (P.4-3)/Navigation sys-
tem* (if so equipped)
8.
Hazard warning flasher switch (P.2-39)
9.
Front passenger supplemental air bag
(P.1-42)
10. Fuse box cover (P.8-24)
11. Parking brake (for Automatic Trans-
mission models)
Parking (P.5-21)
12. Push-button ignition switch (P.5-9)
13. Automatic climate control system
(P.4-31)
14. Cigarette lighter and ashtray (if so
equipped) (P.2-44) or storage box (if
so equipped) (P.2-50)
Power outlet (if so equipped)
(P.2-43)
15. Parking brake (for Manual Transmis-
sion models)
Parking (P.5-21)
16. Heated seat switch (if so equipped)
(P.2-40)
17. SNOW mode switch (if so equipped)
(P.2-42)
18. Rear window and outside mirror (if so
equipped) defroster switch (P.2-34)
INSTRUMENT PANEL
2-44
Instruments and controls
.
Avoid using power outlet when the air
conditioner, headlights or rear window
defroster is on.
.
This power outlet is not designed for use
with a cigarette lighter unit.
.
Push the plug in as far as it will go. If
good contact is not made, the plug may
overheat
or
the
internal
temperature
fuse may blow.
.
Before inserting or disconnecting a plug,
be sure the electrical accessory being
used is turned OFF.
.
When not in use, be sure to close the
cap. Do not allow water or any liquid to
contact the outlet.
GUID-DE8DDBA2-893D-409D-9154-63B79271B874
SIC3219
FRONT
GUID-1791CA11-E504-4F56-A33F-1E5AD0535DB5
To open the ashtray lid, push the lid down
and release it
*
1
.
To empty the ashtray, pull out
*
2
.
The cigarette lighter operates when the
ignition switch is in the ON position.
Push the lighter in all the way
*
3
, then
release it. When the lighter is heated, it will
spring out. Return the lighter to its original
position after use.
CAUTION
.
The cigarette lighter socket is a power
source for the cigarette lighter element
only. The use of the cigarette lighter
socket as a power source for any other
accessory is not recommended.
.
Do not use any other power outlet for an
accessory lighter.
CIGARETTE LIGHTER AND ASHTRAYS (if so
equipped)
the
port
after
the
driver
s
door
is
closed.
The driver
s seat will not return to the
previous positions if the seat or steering
adjusting switch is operated when the seat
is at the exit position.
Cancel or activate entry/exit func-
tion
GUID-8D71F741-560B-4B4E-AA55-F9F223C96E4F
The selector lever must be in the P (Park)
position with the ignition switch in the OFF
position.
The entry/exit function can be activated or
canceled by pressing and holding the SET
switch for more than 10 seconds.
The
indicator
lights
on
the
memory
switches (1 and 2) will blink once when
the function is canceled, and the indicator
lights will blink twice when the function is
activated. Note that the indicator lights
may
illuminate
after
5
seconds
while
holding
the
SET switch. This
indicates
readiness for linking the Intelligent Key to
a stored memory position. Keep the SET
switch pressed for more than 10 seconds
to turn on or off the entry/exit function.
The entry/exit function can also be acti-
vated
or
canceled
if
the
Lift
Steering
Wheel on Exit
key or
Slide Driver Seat
Back on Exit
key is turned to ON or OFF in
the
Comfort
settings.
(See
Vehicle
information and settings
(P.4-9).)
Initialize entry/exit function
GUID-0EEBBCEC-2899-4DC8-AE43-1CC42FE3C5C1
If the battery cable is disconnected, or if
the fuse opens, the entry/exit function will
not work though this function was set on
before. In such a case, after connecting the
battery or replacing with a new fuse, open
and close the driver
s door more than two
times after the ignition switch is turned
from the ON position to the LOCK position.
The entry/exit function will be activated.
SPA2322
SEAT SYNCHRONIZATION FUNCTION
GUID-44A9BCE7-C5A3-4DE5-84C7-DAFAF434BFA8
The seat synchronization function automa-
tically adjusts the positions of the steering
wheel and outside mirrors when the seat is
adjusted using the power seat switches.
However, the steering wheel and outside
mirrors will not move if the seat is adjusted
over the maximum thresholds. The system
considers
that
the
steering
wheel
and
outside mirror adjustments are not neces-
sary because the seat may not be adjusted
for
the
driving
position.
Note
that
the
function is set to disabled as the factory
default setting.
Pre-driving checks and adjustments
3-31
switch.
If
memory
is
stored
in
the
same
memory switch, the previous memory
will be deleted.
Linking Intelligent Key to a stored
memory position
GUID-260E8272-8777-4E19-9288-E40B723FABBA
The Intelligent Key can be linked to a
stored memory position with the following
procedure.
1.
Follow the steps for storing a memory
position.
2.
While the indicator light for the memory
switch being set is illuminated for 5
seconds, push the
button on the
Intelligent Key. If the indicator light
blinks, the Intelligent Key is linked to
that memory setting.
Push the ignition switch to the OFF posi-
tion, and then push the
button on the
Intelligent Key. The driver
s seat, steering
wheel and outside mirrors will move to the
memorized position.
Confirming memory storage
GUID-E5D175B3-57DC-4C96-A449-0B72F25D2264
.
Push
the
ignition
switch
to
the
ON
position and push the SET switch. If
the main memory has not been stored,
the indicator light will come on for
approximately 0.5 second. When the
memory
has stored in position, the
indicator light will stay on for approxi-
mately 5 seconds.
.
If the battery cable is disconnected, or if
the fuse opens, the memory will be
canceled. In this case, reset the desired
position using the previous procedure.
.
If optional Intelligent Keys are added to
your vehicle, the memory storage pro-
cedure to switch 1 or 2 and linking
Intelligent Key procedure to a stored
memory position should be performed
again
for
each
Intelligent
Key.
For
additional Intelligent Key information,
see
Keys
(P.3-2).
Selecting the memorized position
GUID-739A81F0-8862-49C2-BBA8-117F41F648F9
1.
Automatic transmission models:
Move the selector lever to the P (Park)
position.
Manual transmission models:
Apply the parking brake.
2.
Raise the seatback (Coupe).
3.
Use one of the following methods to
move
the
driver
s
seat,
the
outside
mirrors and the steering wheel.
.
Push the ignition switch to the ON
position
and
push
the
memory
switch (1 or 2) fully for at least 1
second.
.
Within 45 seconds of opening the
driver
s
door,
push
the
memory
switch (1 or 2) fully for at least 1
second.
The driver
s seat, steering column
and outside mirrors will move to the
memorized position with the indica-
tor light flashing, and then the light
will
stay
on
for
approximately
5
seconds.
For
manual
transmission
models,
the
memory positions can be selected even
when the engine is running. In this case,
move the shift lever to the N (Neutral)
position
and
apply
the
parking
brake.
Then, perform step 2.
SYSTEM OPERATION
GUID-0383C8BF-12F8-48D0-9B28-5A2A0DCC8D55
The automatic drive positioner system will
not work or will stop operating under the
following conditions:
.
When the vehicle speed is above 4 MPH
(7 km/h).
.
When
the
adjusting
switch
for
the
driver
s seat and steering column is
turned on while the automatic drive
Pre-driving checks and adjustments
3-33
4-62
Monitor, climate, audio, phone and voice recognition systems
Forward or Rewind to tune from low to
high or high to low frequencies and to
stop at the next broadcasting station.
.
For SiriusXM Satellite Radio
Push the SEEK·CAT or TRACK button
Forward or Rewind to tune to the first
channel of the next or previous cate-
gory.
During satellite radio reception, the follow-
ing notices will be displayed under certain
conditions.
.
NO SIGNAL (No signal is received while
the SAT tuner is connected.)
.
OFF AIR (Broadcasting signed off)
.
CHECK ANTENNA (Antenna connection
error)
.
LOADING (When the initial setting is
performed)
.
UPDATING
(When
the
satellite
radio
subscription is not active)
or
SCAN tuning:
GUID-D73A39BF-43C8-459F-9C24-47B7F579C407
Push the SCAN tuning button to tune from
low to high frequencies and stop at each
broadcasting station/channel for
5 sec-
onds. Pushing the button again during this
5 seconds period will stop SCAN tuning
and the radio will remain tuned to that
station/channel.
If the SCAN tuning button is not pushed
within 5 seconds, SCAN tuning moves to
the next station/channel.
PRESET select (Type B):
GUID-D73A39BF-43C8-459F-9C24-47B7F579C407
Push the PRESET select button to go to the
next
PRESET.
After
choosing
from
the
PRESET A, B or C, you can select the
desired station using the INFINITI controller
or pushing the station preset buttons
*
1
to
*
6
.
*
1
to
*
6
Station memory operations (Type
A):
GUID-D73A39BF-43C8-459F-9C24-47B7F579C407
12 stations/channels can be set for the FM
band (6 each for FM1 and FM2), 18 for
SiriusXM Satellite Radio (6 each for XM1,
XM2 and XM3) and 6 stations can be set
for the AM band.
1.
Choose the radio band using the radio
band select button.
2.
Tune
to
the
desired
station/channel
using
the
SEEK·CAT,
TRACK,
SCAN
button or the radio TUNE knob.
3.
Push
and
hold
the
desired
station
preset button
*
1
to
*
6
until the radio
mutes.
4.
The station indicator will then come on
and the sound will resume. Memorizing
is now complete.
5.
Other buttons can be set in the same
manner.
If the battery cable is disconnected, or if
the fuse opens, the radio memory will be
erased. In that case, reset the desired
stations/channels.
*
1
to
*
6
Station memory operations (Type
B):
GUID-D73A39BF-43C8-459F-9C24-47B7F579C407
6 stations/channels can be set for PRESET
A, B and C. The PRESET A, B and C function
allows you to store a combination of FM,
AM and SiriusXM Satellite Radio stations/
channels for easy access.
1.
Choose preset stations A, B or C using
the preset select button.
2.
Tune to the desired stations/channels
using the SEEK, SCAN or TUNE button.
3.
Select
the
desired
stations/channels
and push and hold the desired stations
preset button
*
1
to
*
6
until a beep
sound is heard. (The radio mutes when
the select button is pushed.)
4.
The stations indicator will then come on
and the sound will resume. Memorizing
is now complete.
5.
Other buttons can be set in the same
manner.
If the battery cable is disconnected, or if
the fuse opens, the radio memory will be
erased. In that case, reset the desired
stations/channels.
List (AM and FM radio) (models with
navigation system):
GUID-D73A39BF-43C8-459F-9C24-47B7F579C407
When the
List
key on the display is
selected while the FM or AM radio is being
played,
the
preset
station
list
will
be
displayed.
If
1
of
the
6
preset
stations
listed
is
touched and held, the current station will
be stored as the new preset.
Menu (SiriusXM Satellite Radio) (models
with navigation system):
GUID-D73A39BF-43C8-459F-9C24-47B7F579C407
When the
Menu
key on the display is
selected while the SiriusXM Satellite Radio
is being played, the menu list will be
displayed.
The following items are available.
.
Preset List
Displays the preset channel list. If 1 of
the 6 preset stations listed is touched
and held, the current station will be
stored as the new preset.
.
Customize Channel List
Selects specific channels to skip while
using
the
TUNE,
SEEK/CATEGORY or
Menu-Categories feature.
.
Favorite Artists & Songs
Stores the current artist or song that is
being played. Touch the
Alert
key to
be reminded when the stored artist or
song
is
playing
on
a
station
while
listening to SiriusXM Satellite Radio.
.
Categories
Selecting a category will go to the first
channel in that category as defined by
SiriusXM Satellite Radio.
.
Direct Tune
Inputs the channel number by using a
keypad.
Text (models without navigation system):
GUID-D73A39BF-43C8-459F-9C24-47B7F579C407
When the
Text
key is selected with the
INFINITI controller on the display and then
the
ENTER
button
is
pushed
while
the
satellite radio is being played, the text
information listed below will be displayed
on the screen.
.
CH Name
.
Category
.
Name
.
Title
.
Other
Compact Disc (CD) player operation
GUID-92C6C7F8-3A3B-42D9-B8DF-915DA610B375
Push the ignition switch to the ACC or ON
position and insert the Compact Disc (CD)
into the slot with the label side facing up.
The CD will be guided automatically into
the slot and start playing.
After loading the CD, the number of tracks
on the CD and the play time will appear on
the display.
If the radio is already operating, it will
automatically turn off and the CD will play.
If the system has been turned off while the
CD
was
playing,
pushing
the
ON·OFF
button will start the CD.
Do not use 3.1 in (8 cm) discs.
or
PLAY:
GUID-D73A39BF-43C8-459F-9C24-47B7F579C407
When
the
DISC·AUX
or
DISC
(CD
play)
button is pushed with the system off and
the CD loaded, the system will turn on and
the CD will start to play.
When
the
DISC·AUX
or
DISC
button
is
pushed with the CD loaded and the radio
playing, the radio will automatically be
Monitor, climate, audio, phone and voice recognition systems
4-63
8-8
Maintenance and do-it-yourself
GUID-AFE9B83F-FA8B-4F31-955F-26554D8ED4E6
SDI2709
VQ25HR/VQ37VHR ENGINE
GUID-7476C613-7968-488E-A6AE-1408D693BF3B
1.
Fuse/fusible link holder
2.
Battery
3.
Engine oil filler cap
4.
Brake fluid reservoir
5.
Clutch fluid reservoir (Manual Trans-
mission models)
6.
Window washer fluid reservoir
7.
Power steering fluid reservoir
8.
Air cleaner
9.
Radiator filler cap
10. Drive belts
11. Engine coolant reservoir
12. Engine
oil
dipstick
(for
VQ37VHR
engine model)
13. Engine oil dipstick (for VQ25HR en-
gine model)
ENGINE COMPARTMENT CHECK LOCATIONS
8-24
Maintenance and do-it-yourself
GUID-32FB5E6D-5B48-42A8-9F60-83E657B04471
If the brakes do not operate properly, have
the brakes checked by an INFINITI retailer.
SELF-ADJUSTING BRAKES
GUID-2D98160D-8918-4BF3-999B-F13E2922E177
Your vehicle is equipped with self-adjust-
ing brakes.
The disc-type brakes self-adjust every time
the brake pedal is applied.
WARNING
See an INFINITI retailer for a brake system
check if the brake pedal height does not
return to normal.
BRAKE PAD WEAR WARNING
GUID-0D7DECB1-F0F3-4C66-A768-32FE17341FFF
The disc brake pads have audible wear
warnings. When
a
brake
pad
requires
replacement, it will make a high pitched
scraping sound when the vehicle is in
motion. This scraping sound will first occur
only when the brake pedal is depressed.
After more wear of the brake pad, the
sound will always be heard even if the
brake pedal is not depressed. Have the
brakes checked as soon as possible if the
wear warning sound is heard.
Under some driving or climate conditions,
occasional brake squeak, squeal or other
noise
may
be
heard.
Occasional
brake
noise during light to moderate stops is
normal and does not affect the function or
performance of the brake system.
Proper brake inspection intervals should
be followed.
For additional information,
see the maintenance log section of your
INFINITI Service and Maintenance Guide
for maintenance intervals.
GUID-41D7E39E-6F5A-404E-A0B5-F23908CDD33C
SDI1479A
ENGINE COMPARTMENT
GUID-1BD473A4-2C19-4D87-ADC3-1791751AF8EF
CAUTION
Never
use
a
fuse
of
a
higher
or
lower
amperage rating than that specified on the
fuse
box
cover. This
could
damage
the
electrical system or cause a fire.
If
any
electrical
equipment
does
not
operate, check for an open fuse.
1.
Be sure the ignition switch is pushed to
the
OFF
or
LOCK
position
and
the
headlight switch is turned to OFF.
BRAKES
FUSES
2.
Open the engine hood and remove the
cover on the battery and the fuse/
fusible link holder.
3.
Remove
the
fuse/fusible
link
holder
cover.
4.
Remove the fuse with the fuse puller.
SDI1754
5.
If the fuse is open
*
A
, replace it with a
new fuse
*
B
. Spare fuses are stored in
the passenger compartment fuse box.
6.
If a new fuse also opens, have the
electrical system checked and repaired
by an INFINITI retailer.
Fusible links
GUID-E9133FFB-99A7-4084-8BC3-32BBC0B20EAC
If
any
electrical
equipment
does
not
operate and fuses are in good condition,
check the fusible links. If any of these
fusible links are melted, replace only with
genuine INFINITI parts.
Maintenance and do-it-yourself
8-25
8-26
Maintenance and do-it-yourself
SDI2034
PASSENGER COMPARTMENT
GUID-B150D9E0-F345-4BB5-BF72-57CEBE3509C0
CAUTION
Never
use
a
fuse
of
a
higher
or
lower
amperage rating than that specified on the
fuse
box
cover. This
could
damage
the
electrical system or cause a fire.
If
any
electrical
equipment
does
not
operate, check for an open fuse.
1.
Be sure the ignition switch is pushed to
the
OFF
or
LOCK
position
and
the
headlight switch is turned to OFF.
2.
Open the fuse box lid.
3.
Remove the fuse with the fuse puller
*
A
.
4.
If the fuse is open, replace it with a new
fuse.
5.
If a new fuse also opens, have the
electrical system checked and repaired
by an INFINITI retailer. Spare fuses are
stored in the fuse box.
SDI2704
Extended storage switch (if
equipped)
GUID-686D0C65-BB54-46EA-AAE5-01212C2311DD
To
reduce
battery
drain,
the
extended
storage
switch
comes
from
the
factory
switched
off.
Prior
to
delivery
of
your
vehicle, the switch is pushed in (switched
on) and should always remain on.
If
any
electrical
equipment
does
not
operate,
remove
the
extended
storage
switch and check for an open fuse.
NOTE:
If the extended storage switch malfunc-
tions, or if the fuse is open, it is not
necessary to replace the switch. In this
case, remove the extended storage switch
and replace it with a new fuse of the same
rating.
How to remove the extended storage
switch:
GUID-D73A39BF-43C8-459F-9C24-47B7F579C407
1.
To remove the extended storage switch,
be sure the ignition switch is in the OFF
or LOCK position.
2.
Be sure the headlight switch is in the
OFF position.
3.
Remove the fuse box cover.
4.
Pinch the locking tabs
*
1
found on
each side of the storage switch.
5.
Pull
the
storage
switch
straight
out
from the fuse box
*
2
.
GUID-D6C7487D-F01A-4963-A132-57E4904379BF
CAUTION
Be careful not to allow children to swallow
the battery and removed parts.
SDI1834
Replace the battery as follows:
1.
Release the lock knob at the back of the
Intelligent Key and remove the mechan-
ical key.
2.
Insert
a
flat-blade
screwdriver
*
A
wrapped with a cloth into the slit
*
B
of the corner and twist it to separate
the upper part from the lower part.
Maintenance and do-it-yourself
8-27
INTELLIGENT KEY BATTERY REPLACEMENT