Infiniti Q60/G Convertible - 2012 Fuse Box Diagram

Infiniti Q60/G Convertible - 2012 Fuse Box Diagram

0-8
Illustrated table of contents
GUID-F2598EE2-4ED0-4897-999C-49B57146B65A
SSI0671
1.
Side ventilator (P.4-29)
2.
Meters and gauges (P.2-6)
3.
Center ventilator (P.4-29)
4.
Audio system (P.4-39)
5.
Clock (P.2-42)
6.
Center multi-function control panel
Navigation
system*
(if
so
equipped)
Vehicle
information
and
setting
buttons (P.4-9)
Bluetooth
®
Hands-Free Phone Sys-
tem (P.4-84)
Audio system (P.4-39)
7.
Center display (P.4-3)/Navigation sys-
tem* (if so equipped)
8.
Hazard warning flasher switch (P.2-38)
9.
Front passenger supplemental air bag
(P.1-35)
10. Fuse box cover (P.8-22)
11. Parking brake (for Automatic Trans-
mission models)
Parking (P.5-20)
12. Push-button ignition switch (P.5-9)
13. Automatic climate control system
(P.4-30)
14. Cigarette lighter and ashtray (if so
equipped) (P.2-43) or Storage box (if
so equipped) (P.2-47)
Power outlet (if so equipped)
(P.2-42)
15. Parking brake (for Manual Transmis-
sion models)
Parking (P.5-20)
16. Heated seat switch (if so equipped)
(P.2-39)
or
Climate
controlled
seat
switch (if so equipped) (P.2-40)
17. Retractable hard top operating switch
(P.3-19)
18. Rear
window
and
outside
mirror
defroster switch (P.2-33)
INSTRUMENT PANEL
GUID-2ED975C1-73AA-48D5-A763-122BCB2FAB12
SSI0345
VQ37VHR ENGINE
GUID-FD4E85CB-A015-4203-BE63-133D9C42BAA5
1.
Fuse/fusible link holder (P.8-22)
2.
Battery (P.8-15)
3.
Engine oil filler cap (P.8-10)
4.
Brake fluid reservoir (P.8-13)
5.
Clutch fluid reservoir (Manual Trans-
mission models) (P.8-13)
6.
Window washer fluid reservoir
(P.8-14)
7.
Power steering fluid reservoir (P.8-13)
8.
Air cleaner (P.8-19)
9.
Radiator filler cap (P.8-8)
10. Drive belts location (P.8-17)
11. Engine Coolant reservoir (P.8-8)
12. Engine oil dipstick (P.8-10)
Illustrated table of contents
0-11
ENGINE COMPARTMENT
2-4
Instruments and controls
GUID-507DB2E5-3931-43B9-87C2-FB1ED4E7E3EE
SSI0671
1.
Side ventilator (P.4-29)
2.
Meters and gauges (P.2-6)
3.
Center ventilator (P.4-29)
4.
Audio system (P.4-39)
5.
Clock (P.2-42)
6.
Center multi-function control panel
Navigation
system*
(if
so
equipped)
Vehicle
information
and
setting
buttons (P.4-9)
Bluetooth
®
Hands-Free Phone Sys-
tem (P.4-84)
Audio system (P.4-39)
7.
Center display (P.4-3)/Navigation sys-
tem* (if so equipped)
8.
Hazard warning flasher switch (P.2-38)
9.
Front passenger supplemental air bag
(P.1-35)
10. Fuse box cover (P.8-22)
11. Parking brake (for Automatic Trans-
mission models)
Parking (P.5-20)
12. Push-button ignition switch (P.5-9)
13. Automatic climate control system
(P.4-30)
14. Cigarette lighter and ashtray (if so
equipped) (P.2-43) or Storage box (if
so equipped) (P.2-47)
Power outlet (if so equipped)
(P.2-42)
15. Parking brake (for Manual Transmis-
sion models)
Parking (P.5-20)
16. Heated seat switch (if so equipped)
(P.2-39)
or
Climate
controlled
seat
switch (if so equipped) (P.2-40)
17. Retractable hard top operating switch
(P.3-19)
18. Rear window and outside mirror (if so
equipped) defroster switch (P.2-33)
INSTRUMENT PANEL
battery.
.
Avoid using power outlet when the air
conditioner, headlights or rear window
defroster is on.
.
This power outlet is not designed for use
with a cigarette lighter unit.
.
Push the plug in as far as it will go. If
good contact is not made, the plug may
overheat
or
the
internal
temperature
fuse may blow.
.
Before inserting or disconnecting a plug,
be sure the electrical accessory being
used is turned OFF.
.
When not in use, be sure to close the
cap. Do not allow water to contact the
outlet.
GUID-C44CB010-7D5B-48D7-9616-ECB2CBA7FC29
SIC3219
FRONT
GUID-AE280F34-4FD9-4712-BE62-1AA5219B76FD
To open the ashtray lid, push the lid down
and release it
*
1
.
To empty the ashtray, pull out
*
2
.
The cigarette lighter operates when the
ignition switch is in the ON position.
Push the lighter in all the way
*
3
, then
release it. When the lighter is heated, it will
spring out. Return the lighter to its original
position after use.
CAUTION
.
The cigarette lighter socket is a power
source for the cigarette lighter element
only. The use of the cigarette lighter
socket as a power source for any other
accessory is not recommended.
.
Do not use any other power outlet for an
accessory lighter.
Instruments and controls
2-43
CIGARETTE LIGHTER AND ASHTRAYS (if so
equipped)
3-40
Pre-driving checks and adjustments
approximately 0.5 second. When the
memory
has stored in position, the
indicator light will stay on for approxi-
mately 5 seconds.
.
If the battery cable is disconnected, or if
the fuse opens, the memory will be
canceled. In this case, reset the desired
position using the previous procedure.
.
If optional Intelligent Keys are added to
your vehicle, the memory storage pro-
cedure to switch 1 or 2 and linking
Intelligent Key procedure to a stored
memory position should be performed
again
for
each
Intelligent
Key.
For
additional Intelligent Key information,
see
Keys
(P.3-3).
Selecting the memorized position
GUID-B4225C04-5594-4362-9498-D7E86BCA5C7E
1.
Automatic transmission models:
Move the selector lever to the P (Park)
position.
Manual transmission models:
Apply the parking brake.
2.
Raise the seatback.
3.
Use one of the following methods to
move
the
driver
s
seat,
the
outside
mirrors and the steering wheel.
.
Push the ignition switch to the ON
position
and
push
the
memory
switch (1 or 2) fully for at least 1
second.
.
Within 45 seconds of opening the
driver
s
door,
push
the
memory
switch (1 or 2) fully for at least 1
second.
The driver
s seat, steering column
and outside mirrors will move to the
memorized position with the indica-
tor light flashing, and then the light
will
stay
on
for
approximately
5
seconds.
For
manual
transmission
models,
the
memory positions can be selected even
when the engine is running. In this case,
move the shift lever to the N (Neutral)
position
and
apply
the
parking
brake.
Then, perform step 2.
SYSTEM OPERATION
GUID-3F1DB0D1-D958-41C0-A873-328B8F9FBECB
The automatic drive positioner system will
not work or will stop operating under the
following conditions:
.
When the vehicle speed is above 4 MPH
(7 km/h).
.
When
the
adjusting
switch
for
the
driver
s seat and steering column is
turned on while the automatic drive
positioner is operating.
.
When the memory switch 1 or 2 is not
pushed for at least 1 second.
.
When the seat, steering column and
outside
mirrors
have
already
been
moved to the memorized position.
.
When
no
position
is
stored
in
the
memory switch.
.
When the parking brake is released (MT
models).
.
When the speed is above 4 MPH (7
km/h)
while
the
parking
brake
is
applied (MT models).
.
To restart the drive positioner system,
move the parking brake to off and on.
.
When
the
engine
is
started
while
moving the automatic drive positioner.
.
When the driver
s door remains open
for
more
than
45
seconds and
the
ignition switch is not in the ON posi-
tion.
.
When the seatback is folded.
.
While the walk-in function operates.
.
The
seat
synchronization
function
is
automatically disabled if the outside
mirrors or steering wheel reaches its
maximum adjustment.
or
to tune from low to high or high
to low frequencies and to stop at the
next broadcasting station.
.
For XM Satellite Radio
Push the SEEK·CAT or TRACK button
or
to tune to the first channel of the
next or previous category.
During satellite radio reception, the follow-
ing notices will be displayed under certain
conditions.
.
NO SIGNAL (No signal is received while
the SAT tuner is connected.)
.
OFF AIR (Broadcasting signed off)
.
CHECK ANTENNA (Antenna connection
error)
.
LOADING (When the initial setting is
performed)
.
UPDATING
(When
the
satellite
radio
subscription is not active)
SCAN tuning:
GUID-D73A39BF-43C8-459F-9C24-47B7F579C407
Push the SCAN tuning button to tune from
low to high frequencies and stop at each
broadcasting station/channel for
5 sec-
onds. Pushing the button again during this
5 seconds period will stop SCAN tuning
and the radio will remain tuned to that
station/channel.
If the SCAN tuning button is not pushed
within 5 seconds, SCAN tuning moves to
the next station/channel.
*
1
to
*
6
Station memory operations:
GUID-D73A39BF-43C8-459F-9C24-47B7F579C407
12 stations/channels can be set for the FM
band (6 each for FM1 and FM2), 18 for XM
radio (6 each for XM1, XM2 and XM3) and 6
stations can be set for the AM band.
1.
Choose the radio band using the radio
band select button.
2.
Tune
to
the
desired
station/channel
using
the
SEEK·CAT,
TRACK,
SCAN
button or the radio TUNE knob.
3.
Push
and
hold
the
desired
station
preset button
*
1
to
*
6
until the radio
mutes.
4.
The station indicator will then come on
and the sound will resume. Memorizing
is now complete.
5.
Other buttons can be set in the same
manner.
If the battery cable is disconnected, or if
the fuse opens, the radio memory will be
erased. In that case, reset the desired
stations/channels.
List (AM and FM radio) (models with
navigation system):
GUID-D73A39BF-43C8-459F-9C24-47B7F579C407
When the
List
key on the display is
selected while the FM or AM radio is being
played,
the
preset
station
list
will
be
displayed.
If
1
of
the
6
preset
stations
listed
is
touched and held, the current station will
be stored as the new preset.
Menu (XM Satellite Radio) (models with
navigation system):
GUID-D73A39BF-43C8-459F-9C24-47B7F579C407
When the
Menu
key on the display is
selected while the XM Satellite Radio is
being
played,
the
menu
list
will
be
displayed.
The following items are available.
.
Preset List
Displays the preset channel list. If 1 of
the 6 preset stations listed is touched
and held, the current station will be
stored as the new preset.
.
Customize Channel List
Selects specific channels to skip while
using
the
TUNE,
SEEK/CATEGORY or
Menu-Categories feature.
.
Favorite Artists & Songs
Stores the current artist or song that is
Monitor, climate, audio, phone and voice recognition systems
4-55
GUID-525850E4-370C-413C-8AEB-A266E40A1898
SSI0345
VQ37VHR ENGINE
GUID-A979648E-87A1-4FAB-A735-8E8F3227852A
1.
Fuse/fusible link holder
2.
Battery
3.
Engine oil filler cap
4.
Brake fluid reservoir
5.
Clutch fluid reservoir (Manual Trans-
mission models)
6.
Window washer fluid reservoir
7.
Power steering fluid reservoir
8.
Air cleaner
9.
Radiator filler cap
10. Drive belt location
11. Engine coolant reservoir
12. Engine oil dipstick
Maintenance and do-it-yourself
8-7
ENGINE COMPARTMENT CHECK LOCATIONS
8-22
Maintenance and do-it-yourself
GUID-E5DF23F8-C853-4A16-B731-875E7AB9DDC2
SDI1479A
ENGINE COMPARTMENT
GUID-64171551-5633-47A8-B88A-55FE9630BBEA
CAUTION
Never
use
a
fuse
of
a
higher
or
lower
amperage rating than that specified on the
fuse
box
cover. This
could
damage
the
electrical system or cause a fire.
If
any
electrical
equipment
does
not
operate, check for an open fuse.
1.
Be sure the ignition switch is pushed to
the
OFF
or
LOCK
position
and
the
headlight switch is turned to OFF.
2.
Open the engine hood and remove the
cover on the battery and the fuse/
fusible link holder.
3.
Remove
the
fuse/fusible
link
holder
cover.
4.
Remove the fuse with the fuse puller
located in the passenger compartment
fuse box.
SDI1754
5.
If the fuse is open
*
A
, replace it with a
new fuse
*
B
. Spare fuses are stored in
the passenger compartment fuse box.
6.
If a new fuse also opens, have the
electrical system checked and repaired
by an INFINITI retailer.
Fusible links
GUID-85CCA4A5-CFBD-4923-A9D8-AF759D45C85C
If
any
electrical
equipment
does
not
operate and the fuses are in good condi-
tion, check the fusible links. If any of these
fusible links are melted, replace only with
genuine INFINITI parts.
FUSES
SDI2034
PASSENGER COMPARTMENT
GUID-9D5688A6-7D00-46FA-BF55-FAC9DF823B75
CAUTION
Never
use
a
fuse
of
a
higher
or
lower
amperage rating than that specified on the
fuse
box
cover. This
could
damage
the
electrical system or cause a fire.
If
any
electrical
equipment
does
not
operate, check for an open fuse.
1.
Be sure the ignition switch is pushed to
the
OFF
or
LOCK
position
and
the
headlight switch is turned to OFF.
2.
Open the fuse box lid.
3.
Remove the fuse with the fuse puller
*
A
.
4.
If the fuse is open, replace it with a new
fuse. Spare fuses are stored in the fuse
box.
5.
If a new fuse also opens, have the
electrical system checked and repaired
by an INFINITI retailer.
SDI2704
Extended storage switch (if so
equipped)
GUID-1E0892FA-E301-4392-AAE1-8014810BCC3B
To
reduce
battery
drain,
the
extended
storage
switch
comes
from
the
factory
switched
off.
Prior
to
delivery
of
your
vehicle, the switch is pushed in (switched
on) and should always remain on.
If
any
electrical
equipment
does
not
operate,
remove
the
extended
storage
switch and check for an open fuse.
NOTE:
The extended storage switch is used for
long
term
vehicle
storage.
Even
if
the
extended storage switch is broken it is not
Maintenance and do-it-yourself
8-23
8-24
Maintenance and do-it-yourself
necessary to replace it. Replace only the
open fuse in the switch with a new fuse.
How to remove the extended storage
switch:
GUID-D73A39BF-43C8-459F-9C24-47B7F579C407
1.
To remove the extended storage switch,
be sure the ignition switch is in the OFF
or LOCK position.
2.
Be sure the headlight switch is in the
OFF position.
3.
Remove the fuse box cover.
4.
Pinch the locking tabs
*
1
found on
each side of the storage switch.
5.
Pull
the
storage
switch
straight
out
from the fuse box
*
2
.
GUID-1F9B8636-7E6E-45E3-956E-110F7CC84D80
CAUTION
Be careful not to allow children to swallow
the battery and removed parts.
SDI2451
Replace the battery as follows:
1.
Release the lock knob at the back of the
Intelligent Key and remove the mechan-
ical key.
2.
Insert a flat-blade screwdriver wrapped
with a cloth into the slit of the corner
and twist it to separate the upper part
INTELLIGENT KEY BATTERY REPLACEMENT