Infiniti Q50 - 2014 Fuse Box Diagram

Infiniti Q50 - 2014 Fuse Box Diagram

0-8
Illustrated table of contents
JVC0427X
1.
Paddle shifter (if so equipped) (P.5-16)
2.
Meters and gauges (P.2-6)
Clock (P.2-34)
3.
Push-button ignition switch (P.5-10)
4.
Center ventilator (P.4-2)
5.
Automatic climate control system*
6.
Upper
touch
screen
display
(upper
display)* and Navigation system (if so
equipped)*
7.
Lower
touch
screen
display
(lower
display)*
8.
Rear
window
and
outside
mirror
defroster switch (P.2-41)
9.
Front passenger supplemental air bag
(P.1-37)
10. Hood release handle (P.3-18)
11. Fuse box cover (P.8-24)
12. Parking brake (P.5-20)
13. Seat heater switch*
14. Audio system*
15. Trunk release power cancel switch
(P.3-20)
16. Glove box (P.2-51)
*:
Refer to the Infiniti InTouch Owner
s
Manual.
INSTRUMENT PANEL
0-10
Illustrated table of contents
JVM0294X
1.
Engine oil filler cap (P.8-12)
2.
Brake fluid reservoir (P.8-15)
3.
Fuse/fusible link holder (P.8-23)
4.
Air cleaner (P.8-20)
5.
Inverter coolant reservoir (P.8-11)
6.
Radiator filler cap (P.8-9)
7.
Engine coolant reservoir (P.8-9)
8.
Engine oil dipstick (P.8-12)
9.
Window washer fluid reservoir
(P.8-16)
VQ35HR ENGINE
The 12-volt battery is located inside the
trunk.
ENGINE COMPARTMENT
JVC0427X
1.
Paddle shifter (if so equipped) (P.5-16)
2.
Meters and gauges (P.2-6)
Clock (P.2-34)
3.
Push-button ignition switch (P.5-10)
4.
Center ventilator (P.4-2)
5.
Automatic climate control system*
6.
Upper
touch
screen
display
(upper
display)* and Navigation system* (if
so equipped)
7.
Lower
touch
screen
display
(lower
display)*
8.
Rear
window
and
outside
mirror
defroster switch (P.2-41)
9.
Front passenger supplemental air bag
(P.1-37)
10. Hood release handle (P.3-18)
11. Fuse box cover (P.8-24)
12. Parking brake (P.5-20)
13. Seat heater switch*
14. Audio system*
15. Trunk release power cancel switch
(P.3-20)
16. Glove box (P.2-51)
*:
Refer to the Infiniti InTouch Owner
s
Manual.
Instruments and controls
2-5
INSTRUMENT PANEL
21. All-Wheel Drive (AWD) warning
(if so equipped)
This warning appears when the Intelligent
All-Wheel
Drive
(AWD)
system
is
not
functioning
properly
while
the
hybrid
system is running. (See
Intelligent All-
Wheel Drive (AWD)
(P.5-101).)
22. Extended storage fuse warning
This warning may appear if the extended
storage
fuse
switch
is
not
pushed
in
(switched on). When this warning appears,
push in (switch on) the extended storage
fuse switch to turn off the warning. For
more information, see
Extended storage
fuse switch
(P.8-24).
23. Headlight warning
This warning appears if the LED headlights
are
malfunctioning.
Have
the
system
checked by an INFINITI retailer.
24. Adaptive Front lighting System
(AFS) warning (if so equipped)
This warning appears when the Adaptive
Front lighting System (AFS) is not function-
ing properly. Have the system checked by
an INFINITI retailer.
(See
Adaptive Front lighting System (AFS)
(P.2-45).)
25. Power will turn off to save the
battery warning
This warning appears after a period of time
if the shift lever has not moved from the
P
(Park) position with the ignition switch
in the ACC or ON position.
26. Power turned off to save the
battery warning
This warning appears after the ignition
switch is automatically turned OFF to save
the 12-volt battery.
27. Light reminder warning
This warning appears when the driver side
door is opened with the headlight switch
left ON and the ignition switch in the ACC,
OFF or LOCK position. Place the headlight
switch to
OFF
or
AUTO
position. For
additional information, see
Headlight and
turn signal switch
(P.2-41).
28.
TIMER
indicator
This
indicator
appears
when
the
set
TIMER
indicator activates. You can set
the time for up to 6 hours. (See the Infiniti
InTouch Owner
s Manual.)
29. Low outside temperature warn-
ing
This warning appears if the outside tem-
perature is below 37
8
F (3
8
C). The warning
can be set not to be displayed. (See the
Infiniti InTouch Owner
s Manual.)
30. Chassis control warning
This warning appears if Active Lane Control
(if so equipped), the active trace control
system
and/or
chassis
control
are
not
functioning
properly.
Have
the
system
checked by an INFINITI retailer. (See
Active
Lane Control
(P.5-24),
Active trace con-
trol
(P.5-110) and
Chassis control
(P.5-
112).)
31. Cruise indicator
Models without Intelligent Cruise Control
(ICC) system:
This indicator shows the cruise control
system status. The status is shown by the
color.
See
Cruise control
(P.5-56) for details.
Models with Intelligent Cruise Control
(ICC) system:
This
indicator
shows
the
conventional
(fixed speed) cruise control mode status.
Instruments and controls
2-27
battery.
.
Avoid using power outlet when the air
conditioner, headlights or rear window
defroster is on.
.
This power outlet is not designed for use
with a cigarette lighter unit.
.
Push the plug in as far as it will go. If
good contact is not made, the plug may
overheat
or
the
internal
temperature
fuse may blow.
.
Before inserting or disconnecting a plug,
be sure the electrical accessory being
used is turned OFF.
.
When not in use, be sure to close the
cap. Do not allow water or any liquid to
contact the outlet.
SIC2570
REAR
To open the ashtray lid, pull
*
1
.
To empty the ashtray, push down
*
2
, and
pull out.
CUP HOLDERS
CAUTION
.
Avoid abrupt starting and braking when
the cup holder is being used to prevent
spilling the drink. If the liquid is hot, it
can scald you or your passenger.
.
Use only soft cups in the cup holder.
Hard
objects
can
injure
you
in
an
accident.
Instruments and controls
2-49
ASHTRAY (if so equipped)
STORAGE
InTouch Owner
s Manual.)
Initialize entry/exit function
If the battery cable is disconnected, or if
the fuse opens, the entry/exit function will
not work though this function was set on
before. In such a case, after connecting the
battery or replacing with a new fuse, open
and close the driver
s door more than two
times after the ignition switch is turned
from the ON position to the LOCK position.
The entry/exit function will be activated.
JVP0240X
MEMORY STORAGE
Two positions for the driver
s seat, steering
column and outside mirrors can be stored
in the automatic drive positioner memory.
Follow these procedures to use the mem-
ory system.
1.
Adjust the driver
s seat, steering col-
umn and outside mirrors to the desired
positions by manually operating each
adjusting switch. For additional infor-
mation, see
Seats
(P.1-2),
Tilt/tele-
scopic steering
(P.3-24) and
Outside
mirrors
(P.3-26).
2.
Push
the
SET switch
and,
within
5
seconds, push the memory switch (1
or 2) fully for at least 1 second.
The
indicator
light
for
the
pushed
memory switch will stay on for approxi-
mately 5 seconds after pushing the
switch.
When
the
memory
is
stored
in
the
memory switch (1 or 2), a buzzer will
sound.
If
memory
is
stored
in
the
same
memory switch, the previous memory
will be deleted.
Confirming memory storage
.
Push
the
ignition
switch
to
the
ON
position and push the SET switch. If
the main memory has not been stored,
the indicator light will come on for
approximately 0.5 seconds. When the
memory
has stored in position, the
indicator light will stay on for approxi-
mately 5 seconds.
.
If the 12-volt battery cable is discon-
nected,
or
if
the
fuse
opens,
the
memory will be canceled. In this case,
reset the desired position using the
previous procedure.
Pre-driving checks and adjustments
3-29
6-6
In case of emergency
.
Keep the 12-volt battery out of the reach
of children.
.
The booster battery must be rated at 12
volts. Use of an improperly rated battery
can damage your vehicle.
.
Whenever working on or near a 12-volt
battery, always wear suitable eye pro-
tectors (for example, goggles or indus-
trial
safety
spectacles)
and
remove
rings, metal bands, or any other jewelry.
Do not lean over the 12-volt battery
when jump starting.
.
Do not attempt to jump start a frozen
battery.
It
could
explode
and
cause
serious injury.
.
Your vehicle has an automatic engine
cooling fan. It could come on at any time.
Keep hands and other objects away from
it.
CAUTION
Do
not
attempt
to
jump
start
a
hybrid
vehicle as a booster vehicle.
JVE0118X
WARNING
Always follow the instructions below. Failure
to do so could result in damage to the
charging system and cause personal injury.
1.
If the booster battery is in another
vehicle
*
A
, position the two vehicles
(
*
A
and
*
B
) to bring the battery and
the fuse box into close proximity to
each other.
Do not allow the two vehicles to touch.
2.
Apply parking brake. Move the shift
lever to the P (Park) position. Switch off
all
unnecessary
electrical
systems
(light, heater, air conditioner, etc.).
3.
Connect jumper cables in the sequence
as illustrated (
*
1
?
*
2
?
*
3
?
*
4
).
CAUTION
.
Always connect positive (+) to positive
(+) and negative (
) to body ground (as
illustrated)
not to the 12-volt battery.
.
Make sure the jumper cables do not
touch moving parts in the engine com-
8-8
Maintenance and do-it-yourself
JVM0294X
1.
Engine oil filler cap
2.
Brake fluid reservoir
3.
Fuse/fusible link holder
4.
Air cleaner
5.
Inverter coolant reservoir
6.
Radiator filler cap
7.
Engine coolant reservoir
8.
Engine oil dipstick
9.
Window washer fluid reservoir
The 12-volt battery is located inside the
trunk.
JVM0255X
Engine compartment
JVM0322X
Trunk
ENGINE COMPARTMENT AND TRUNK
CAUTION
Never
use
a
fuse
of
a
higher
or
lower
amperage rating than that specified on the
fuse
box
cover. This
could
damage
the
electrical system or cause a fire.
If
any
electrical
equipment
does
not
operate, check for an open fuse.
1.
Be sure the ignition switch is pushed to
the
OFF
or
LOCK
position
and
the
headlight switch is turned to OFF.
2.
Open the engine hood or trunk lid and
to access the cover on the fuse/fusible
link holder.
3.
Remove
the
fuse/fusible
link
holder
cover.
4.
Remove the fuse with the fuse puller.
SDI1754
5.
If the fuse is open
*
A
, replace it with a
new fuse
*
B
. Spare fuses are stored in
the passenger compartment fuse box.
6.
If a new fuse also opens, have the
electrical system checked and repaired
by an INFINITI retailer.
Fusible links
If
any
electrical
equipment
does
not
operate and fuses are in good condition,
check the fusible links. If any of these
fusible links are melted, replace only with
genuine INFINITI parts.
Maintenance and do-it-yourself
8-23
FUSES
8-24
Maintenance and do-it-yourself
JVM0256X
PASSENGER COMPARTMENT
CAUTION
Never
use
a
fuse
of
a
higher
or
lower
amperage rating than that specified on the
fuse
box
cover. This
could
damage
the
electrical system or cause a fire.
If
any
electrical
equipment
does
not
operate, check for an open fuse.
1.
Be sure the ignition switch is pushed to
the
OFF
or
LOCK
position
and
the
headlight switch is turned to OFF.
2.
Open the fuse box lid.
3.
Remove the fuse with the fuse puller
*
A
.
4.
If the fuse is open, replace it with a new
fuse.
5.
If a new fuse also opens, have the
electrical system checked and repaired
by an INFINITI retailer. Spare fuses are
stored in the fuse box.
JVM0257X
Extended storage fuse switch (if so
equipped)
To reduce 12-volt battery drain, the ex-
tended storage fuse switch comes from the
factory switched off. Prior to delivery of
your
vehicle,
the
switch
is
pushed
in
(switched on) and should always remain
on.
If the extended storage fuse switch is not
pushed in (switched on), the
Shipping
Mode On, Push Storage Fuse
warning may
appear in the vehicle information display.
See
22. Extended storage fuse warning
(P.2-27).
If
any
electrical
equipment
does
not
operate, remove the extended storage fuse
switch and check for an open fuse.
NOTE:
If the extended storage fuse switch mal-
functions or if the fuse is open, it is not
necessary to replace the switch. In this
case, remove the extended storage fuse
switch and replace it with a new fuse of
the same rating.
How to remove the extended storage fuse
switch:
1.
To remove the extended storage fuse
switch, be sure the ignition switch is in
the OFF or LOCK position.
2.
Be sure the headlight switch is in the
OFF position.
3.
Remove the fuse box cover.
4.
Pinch the locking tabs
*
1
found on
each side of the storage fuse switch.
5.
Pull the storage fuse switch straight out
from the fuse box
*
2
.
CAUTION
Be careful not to allow children to swallow
the battery and removed parts.
JVM0317X
To replace the battery:
1.
Release the lock knob at the back of the
Intelligent Key and remove the mechan-
ical key.
2.
Insert a flat-blade screwdriver wrapped
with a cloth into the slit of the corner
and twist it to separate the upper part
Maintenance and do-it-yourself
8-25
INTELLIGENT KEY BATTERY REPLACEMENT
0-8
Illustrated table of contents
JVC0427X
1.
Paddle shifter (if so equipped) (P.5-17)
2.
Meters and gauges (P.2-6)
Clock (P.2-30)
3.
Push-button ignition switch (P.5-10)
4.
Center ventilator (P.4-2)
5.
Automatic climate control system*
6.
Upper
touch
screen
display
(upper
display)* and Navigation system (if so
equipped)*
7.
Lower
touch
screen
display
(lower
display)*
8.
Rear
window
and
outside
mirror
defroster switch (P.2-36)
9.
Front passenger supplemental air bag
(P.1-42)
10. Hood release handle (P.3-18)
11. Fuse box cover (P.8-22)
12. Parking brake (P.5-20)
13. Seat heater switch (if so equipped)*
14. Audio system*
15. Trunk release power cancel switch
(P.3-20)
16. Glove box (P.2-47)
*:
Refer to the Infiniti InTouch Owner
s
Manual.
INSTRUMENT PANEL
0-10
Illustrated table of contents
JVM0250X
VQ37VHR ENGINE
1.
Battery (P.8-15)
2.
Engine oil filler cap (P.8-10)
3.
Brake fluid reservoir (P.8-13)
4.
Power steering fluid reservoir (if so
equipped) (P.8-13)
5.
Air cleaner (P.8-19)
6.
Radiator filler cap (P.8-8)
7.
Engine coolant reservoir (P.8-8)
8.
Engine oil dipstick (P.8-10)
9.
Engine drive belt location (P.8-17)
10. Fuse/fusible link holder (P.8-22)
11. Window washer fluid reservoir
(P.8-14)
ENGINE COMPARTMENT
JVC0427X
1.
Paddle shifter (if so equipped) (P.5-17)
2.
Meters and gauges (P.2-6)
Clock (P.2-30)
3.
Push-button ignition switch (P.5-10)
4.
Center ventilator (P.4-2)
5.
Automatic climate control system*
6.
Upper
touch
screen
display
(upper
display)* and Navigation system* (if
so equipped)
7.
Lower
touch
screen
display
(lower
display)*
8.
Rear
window
and
outside
mirror
defroster switch (P.2-36)
9.
Front passenger supplemental air bag
(P.1-42)
10. Hood release handle (P.3-18)
11. Fuse box cover (P.8-22)
12. Parking brake (P.5-20)
13. Seat heater switch* (if so equipped)
14. Audio system*
15. Trunk release power cancel switch
(P.3-20)
16. Glove box (P.2-47)
*:
Refer to the Infiniti InTouch Owner
s
Manual.
Instruments and controls
2-5
INSTRUMENT PANEL
There is a small reserve of fuel remaining
in the tank when the fuel gauge reaches
the empty (0) position.
10. Low washer fluid warning
This warning appears when the washer
tank fluid is at a low level. Add washer fluid
as necessary. (See
Window washer fluid
(P.8-14).)
11. Door/trunk open warning
This warning appears if any of the doors
and/or the trunk lid are open or not closed
securely. The vehicle icon indicates which
door or the trunk lid is open on the display.
12. Intelligent Key system warning
This warning appears if there is a malfunc-
tion in the Intelligent Key system.
If this warning appears while the engine is
stopped, the engine cannot be started. If
this warning appears while the engine is
running, the vehicle can be driven. How-
ever, contact an INFINITI retailer for repair
as soon as possible.
13. Loose Fuel Cap warning
This warning appears when the fuel-filler
cap is not tightened correctly after the
vehicle has been refueled. (See
Fuel-filler
cap
(P.3-22).)
14. Tire Pressure Low - Add Air
warning
This warning appears when the low tire
pressure warning light in the meter illumi-
nates and low tire pressure is detected.
The warning appears each time the ignition
switch is placed in the ON position as long
as
the
low
tire
pressure
warning
light
remains illuminated. If this warning ap-
pears, stop the vehicle and adjust the
pressure to the recommended COLD tire
pressure shown on the Tire and Loading
Information label. (See
Low tire pressure
warning light
(P.2-14) and
Tire Pressure
Monitoring System (TPMS)
(P.5-4).)
15. Flat Tire - Visit dealer warning
This warning appears when the low tire
pressure warning light in the meter illumi-
nates
and
one
or
more
flat
tires
are
detected
while
driving.
A
chime
also
sounds
for
approximately
10
seconds.
(See
Low
tire
pressure
warning
light
(P.2-14)
and
Tire
Pressure
Monitoring
System (TPMS)
(P.5-4).)
16. Low oil pressure warning
This warning appears if low engine oil
pressure
is
detected.
If
the
warning
appears during normal driving, pull off
the road in a safe area, stop the engine
immediately and call an INFINITI retailer or
other authorized repair shop.
The
low
oil
pressure
warning
is
not
designed to indicate a low oil level. Use
the dipstick to check the oil level. (See
Engine oil
(P.8-10).)
17. All-Wheel Drive (AWD) warning
(if so equipped)
This warning appears when the Intelligent
All-Wheel
Drive
(AWD)
system
is
not
functioning properly while the engine is
running. (See
Intelligent All-Wheel Drive
(AWD)
(P.5-101).)
18. Extended storage fuse warning
This warning may appear if the extended
storage
fuse
switch
is
not
pushed
in
(switched on). When this warning appears,
push in (switch on) the extended storage
fuse switch to turn off the warning. For
more information, see
Extended storage
fuse switch
(P.8-23).
Instruments and controls
2-23
2-44
Instruments and controls
JVI0716X
The power outlets are located in the center
console.
CAUTION
.
The outlet and plug may be hot during or
immediately after use.
.
Do not use with accessories that exceed
a 12 volt, 120W (10A) power draw. Do
not use double adapters or more than
one electrical accessory.
.
Use power outlet with the engine run-
ning to avoid discharging the vehicle
battery.
.
Avoid using power outlet when the air
conditioner, headlights or rear window
defroster is on.
.
This power outlet is not designed for use
with a cigarette lighter unit.
.
Push the plug in as far as it will go. If
good contact is not made, the plug may
overheat
or
the
internal
temperature
fuse may blow.
.
Before inserting or disconnecting a plug,
be sure the electrical accessory being
used is turned OFF.
.
When not in use, be sure to close the
cap. Do not allow water or any liquid to
contact the outlet.
SIC2570
REAR
To open the ashtray lid, pull
*
1
.
To empty the ashtray, push down
*
2
, and
pull out.
POWER OUTLET
ASHTRAY (if so equipped)
3-30
Pre-driving checks and adjustments
InTouch Owner
s Manual.)
Initialize entry/exit function
If the battery cable is disconnected, or if
the fuse opens, the entry/exit function will
not work though this function was set on
before. In such a case, after connecting the
battery or replacing with a new fuse, open
and close the driver
s door more than two
times after the ignition switch is switched
from the ON position to the LOCK position.
The entry/exit function will be activated.
JVP0240X
MEMORY STORAGE
Two positions for the driver
s seat, steering
column and outside mirrors can be stored
in the automatic drive positioner memory.
Follow these procedures to use the mem-
ory system.
1.
Adjust the driver
s seat, steering col-
umn and outside mirrors to the desired
positions by manually operating each
adjusting switch. For additional infor-
mation, see
Seats
(P.1-2),
Tilt/tele-
scopic steering
(P.3-24) and
Outside
mirrors
(P.3-27).
2.
Push
the
SET switch
and,
within
5
seconds, push the memory switch (1
or 2) fully for at least 1 second.
The
indicator
light
for
the
pushed
memory switch will stay on for approxi-
mately 5 seconds after pushing the
switch.
When
the
memory
is
stored
in
the
memory switch (1 or 2), a buzzer will
sound.
If
memory
is
stored
in
the
same
memory switch, the previous memory
will be deleted.
Confirming memory storage
.
Push
the
ignition
switch
to
the
ON
position and push the SET switch. If
the main memory has not been stored,
the indicator light will come on for
approximately 0.5 seconds. When the
memory
has stored in position, the
indicator light will stay on for approxi-
mately 5 seconds.
.
If the battery cable is disconnected, or if
the fuse opens, the memory will be
canceled. In this case, reset the desired
position using the previous procedure.
JVM0250X
1.
Battery
2.
Engine oil filler cap
3.
Brake fluid reservoir
4.
Power steering fluid reservoir (if so
equipped)
5.
Air cleaner
6.
Radiator filler cap
7
Engine coolant reservoir
8
Engine oil dipstick
9
Engine drive belt location
10
Fuse/fusible link holder
11
Window washer fluid reservoir
Maintenance and do-it-yourself
8-7
8-22
Maintenance and do-it-yourself
JVM0255X
ENGINE COMPARTMENT
CAUTION
Never
use
a
fuse
of
a
higher
or
lower
amperage rating than that specified on the
fuse
box
cover. This
could
damage
the
electrical system or cause a fire.
If
any
electrical
equipment
does
not
operate, check for an open fuse.
1.
Be sure the ignition switch is pushed to
the
OFF
or
LOCK
position
and
the
headlight switch is turned to OFF.
2.
Open the engine hood.
3.
Remove
the
fuse/fusible
link
holder
cover.
4.
Remove the fuse with the fuse puller.
SDI1754
5.
If the fuse is open
*
A
, replace it with a
new fuse
*
B
. Spare fuses are stored in
the passenger compartment fuse box.
6.
If a new fuse also opens, have the
electrical system checked and repaired
by an INFINITI retailer.
Fusible links
If
any
electrical
equipment
does
not
operate and fuses are in good condition,
check the fusible links. If any of these
fusible links are melted, replace only with
genuine INFINITI parts.
FUSES
JVM0256X
PASSENGER COMPARTMENT
CAUTION
Never
use
a
fuse
of
a
higher
or
lower
amperage rating than that specified on the
fuse
box
cover. This
could
damage
the
electrical system or cause a fire.
If
any
electrical
equipment
does
not
operate, check for an open fuse.
1.
Be sure the ignition switch is pushed to
the
OFF
or
LOCK
position
and
the
headlight switch is turned to OFF.
2.
Open the fuse box lid.
3.
Remove the fuse with the fuse puller
*
A
.
4.
If the fuse is open, replace it with a new
fuse.
5.
If a new fuse also opens, have the
electrical system checked and repaired
by an INFINITI retailer. Spare fuses are
stored in the fuse box.
JVM0257X
Extended storage fuse switch (if so
equipped)
To
reduce
battery
drain,
the
extended
storage fuse switch comes from the factory
switched
off.
Prior
to
delivery
of
your
vehicle, the switch is pushed in (switched
on) and should always remain on.
If the extended storage fuse switch is not
pushed in (switched on), the
Shipping
Mode On, Push Storage Fuse
warning may
appear in the vehicle information display.
See
18. Extended storage fuse warning
(P.2-23).
If
any
electrical
equipment
does
not
Maintenance and do-it-yourself
8-23
8-24
Maintenance and do-it-yourself
operate, remove the extended storage fuse
switch and check for an open fuse.
NOTE:
If the extended storage fuse switch mal-
functions or if the fuse is open, it is not
necessary to replace the switch. In this
case, remove the extended storage fuse
switch and replace it with a new fuse of
the same rating.
How to remove the extended storage fuse
switch:
1.
To remove the extended storage fuse
switch, be sure the ignition switch is in
the OFF or LOCK position.
2.
Be sure the headlight switch is in the
OFF position.
3.
Remove the fuse box cover.
4.
Pinch the locking tabs
*
1
found on
each side of the storage fuse switch.
5.
Pull the storage fuse switch straight out
from the fuse box
*
2
.
CAUTION
Be careful not to allow children to swallow
the battery and removed parts.
JVM0317X
To replace the battery:
1.
Release the lock knob at the back of the
Intelligent Key and remove the mechan-
ical key.
2.
Insert a flat-blade screwdriver wrapped
with a cloth into the slit of the corner
and twist it to separate the upper part
INTELLIGENT KEY BATTERY REPLACEMENT