Chrysler PT Cruiser - 2009 Fuse Box Diagram

Chrysler PT Cruiser - 2009 Fuse Box Diagram

If either light remains on and does not flash, or there is a
very fast flash rate, check for a defective outside light
bulb. If an indicator fails to light when the lever is
moved, it would suggest that the fuse or indicator bulb is
defective.
High Beam/Low Beam Select Switch
Push the multifunction lever away from the steering
wheel to switch the headlights to high beam. Pull the
lever toward the steering wheel to switch the headlights
back to low beam.
Turn Signal Control
High Beam, Low Beam, and Passing Lights
3
UNDERSTANDING THE FEATURES OF YOUR VEHICLE
129
together to minimize the buffeting. If the buffeting occurs
with the sunroof open, adjust the sunroof opening to
minimize the buffeting or open any window.
Sunroof Maintenance
Use only a non-abrasive cleaner and a soft cloth to clean
the glass panel.
ELECTRICAL POWER OUTLETS
The 12-Volt power outlets include tethered caps, labeled
with a key symbol or battery symbol, indicating power
source. All outlets are protected by a single 20 Amp fuse.
The standard outlet in the front of the center floor console
is a conventional cigar lighter outlet.
It will accept a cigar lighter unit, which is part of the
optional Smokers Package. To preserve the heating ele-
ment of the cigar lighter unit, do not hold the lighter in
the heating position. As a child safety precaution, this
power outlet is powered by the ignition switch, only
when the switch is in the ON or ACC position.
Front Power Outlet
3
UNDERSTANDING THE FEATURES OF YOUR VEHICLE
145
There is one optional power outlet located in the right
rear cargo area.
The rear power outlet is powered directly by the battery.
As an option, fuse #11 in the Integrated Power Module
(IPM), may be repositioned to allow power to come from
the
ignition
switch
only,
when
in
the
ON
or ACC
position.
NOTE:
The rear power outlet will not accept a cigar
lighter unit as it is intended only for accessory items.
WARNING!
To avoid serious injury or death:
Do not use a three-prong adapter.
Do not insert any objects into the receptacles.
Do not touch with wet hands.
Close the lid when not in use and while driving
the vehicle.
If this outlet is mishandled, it may cause an
electric shock and failure.
Rear Power Outlet
146
UNDERSTANDING THE FEATURES OF YOUR VEHICLE
Seat Belt Maintenance
Do not bleach, dye or clean the belts with chemical
solvents or abrasive cleaners. This will weaken the fabric.
Sun damage can also weaken the fabric.
If the belts need cleaning, use a mild soap solution or
lukewarm water. Do not remove the belts from the car to
wash them.
Replace the belts if they appear frayed or worn or if the
buckles do not work properly.
Dry with a soft tissue.
FUSES
Integrated Power Module (IPM)
The Integrated Power Module is located in the engine
compartment near the air cleaner assembly. This center
contains cartridge fuses and mini fuses.
Cavity
Cartridge
Fuse
Mini-Fuse
Description
1
EMPTY
2
20 Amp
Yellow
AWD ECU
Feed — If
Equipped
Integrated Power Module
340
MAINTAINING YOUR VEHICLE
Cavity
Cartridge
Fuse
Mini-Fuse
Description
3
10 Amp Red CHMSL
Brake
Switch Feed
4
10 Amp Red Ignition
Switch Feed
5
20 Amp
Yellow
Trailer Tow
6
10 Amp Red IOD Sw/
Pwr Mir/
Ocm
Steering
Cntrl Sdar/
Hfm
7
30 Amp
Green
IOD Sense1
8
30 Amp
Green
IOD Sense2
Cavity
Cartridge
Fuse
Mini-Fuse
Description
9
40 Amp
Green
Power Seats
10
20 Amp
Yellow
CCN Feed,
Power
Locks
11
15 Amp Lt
Blue
Power
Outlet
12
20 Amp
Yellow
Ign Run/
Acc Inverter
13
20 Amp
Yellow
Pwr Run/
Acc Outlet
RR
14
10 Amp Red IOD CCN/
Interior
Lighting
7
MAINTAINING YOUR VEHICLE
341
Cavity
Cartridge
Fuse
Mini-Fuse
Description
15
50 Amp Red
RAD Fan
Relay
Battery Feed
16
15 Amp Lt.
Blue
IGN Run/
Acc Cigar
Ltr/Sunroof
17
10 Amp Red IOD Feed
CVT Mod/
Mod_Wcm
18
40 Amp
Green
ASD Relay
Contact
Feed
19
20 Amp
Yellow
PWR Amp
1 & Amp 2
Feed
20
15 Amp Lt.
Blue
IOD Feed
Radio
Cavity
Cartridge
Fuse
Mini-Fuse
Description
21
10 Amp Red IOD Feed
Intrus
Mod/Siren
22
10 Amp Red IGN RUN
Hvac/
Compass
Sensor
23
15 Amp Lt.
Blue
ENG ASD
Relay Feed
3
24
25 Amp
Natural
PWR
Sunroof
Feed
25
10 Amp Red Heated
Mirror
342
MAINTAINING YOUR VEHICLE
Cavity
Cartridge
Fuse
Mini-Fuse
Description
26
15 Amp Lt.
Blue
ENG ASD
Relay Feed
2
27
10 Amp Red IGN RUN
Only ORC
Feed
28
10 Amp Red IGN RUN
ORC/OCM
Feed
29
EMPTY
30
20 Amp
Yellow
Heated
Seats
31
10 Amp Red Headlamp
Washer
Relay
Control
Cavity
Cartridge
Fuse
Mini-Fuse
Description
32
30 Amp
Pink
ENG ASD
Control
Feed 1
33
10 Amp Red ABS MOD/
J1962
Conn/PCM
34
30 Amp
Pink
ABS Valve
Feed
35
40 Amp
Green
ABS Pump
Feed
36
30 Amp
Pink
Headlamp
Washer
Relay
Contact
Feed
37
25 Amp
Natural
Spare
7
MAINTAINING YOUR VEHICLE
343
INSTALLATION OF RADIO TRANSMITTING
EQUIPMENT
Special design considerations are incorporated into this
vehicle’s electronic system to provide immunity to radio
frequency signals. Mobile two-way radios and telephone
equipment must be installed properly by trained person-
nel. The following must be observed during installation.
The positive power connection should be made directly
to the battery and fused as close to the battery as possible.
The negative power connection should be made to body
sheet metal adjacent to the negative battery connection.
This connection should not be fused.
Antennas for two-way radios should be mounted on the
roof or the rear area of the vehicle. Care should be used
in mounting antennas with magnet bases. Magnets may
affect the accuracy or operation of the compass on
vehicles so equipped.
The antenna cable should be as short as practical and
routed away from the vehicle wiring when possible. Use
only fully shielded coaxial cable.
Carefully match the antenna and cable to the radio to
ensure a low Standing Wave Ratio (SWR).
Mobile radio equipment with output power greater than
normal may require special precautions.
All installations should be checked for possible interfer-
ence between the communications equipment and the
vehicle’s electronic systems.