Chrysler PT Cruiser - 2007 Fuse Box Diagram

Chrysler PT Cruiser - 2007 Fuse Box Diagram

NOTE:
The fog lights will only operate with the head-
lights on low beam. Selecting high beam headlights will
turn off the fog lights.
Turn Signals
Move the Multi-Function Control Lever up or down and
the arrows on each side of the instrument cluster flash to
show proper operation of the front and rear turn signal
lights. You can signal a lane change by moving the lever
partially up or down without moving beyond the detent.
If either light remains on and does not flash, or there is a
very fast flash rate, check for a defective outside light
bulb. If an indicator fails to light when the lever is
moved, it would suggest that the fuse or indicator bulb is
defective.
Turn Signal Control
UNDERSTANDING THE FEATURES OF YOUR VEHICLE
181
3
ELECTRICAL POWER OUTLETS
The outlets include tethered caps, labeled with a key
symbol or battery symbol, indicating power source. All
outlets are protected by a single 20 Amp fuse.
The standard outlet in the front of the center floor console
is a conventional cigar lighter outlet.
It will accept a cigar lighter unit, which is part of the
optional Smokers Package. To preserve the heating ele-
ment of the cigar lighter unit, do not hold the lighter in
the heating position. As a child safety precaution, this
outlet is powered by the ignition switch, only when the
switch is in the
³
ON
³
or
³
ACCESSORY
³
positions.
There are two optional power outlets. One is in the center
console/armrest lower storage bin.
Front Power Outlet
200
UNDERSTANDING THE FEATURES OF YOUR VEHICLE
This outlet is powered directly by the battery, regardless
of the ignition switch position. All accessories connected
to this outlet should be removed or turned off when the
vehicle is not in use, to protect the battery against
discharge.
The second is in the right rear cargo area.
This outlet is powered directly by the battery (as an option,
fuse #11 in the Integrated Power Module (IPM), may be
repositioned to allow power to come from the ignition
switch only when in the
³
ON
³
or
³
ACCESSORY
³
positions).
NOTE:
Neither of the power outlets will accept a cigar
lighter unit. They are intended only for accessory usage.
Center Console Power Outlet
Rear Power Outlet
UNDERSTANDING THE FEATURES OF YOUR VEHICLE
201
3
CAUTION!
Avoid
getting
Scotchguard_
on
the
surrounding
weather strips, moldings, paint, or glass. Damage to
these items might occur.
Weather Strip Care
Lubricate all top and door glass weather strips periodi-
cally with Mopar Weather Strip Lubricant (part number
4773427), to keep them soft and pliable.
INTEGRATED POWER MODULE (IPM)
An Integrated Power Module is located in the engine
compartment near the air cleaner assembly. This center
contains cartridge fuses and mini fuses. A description of
each fuse and component may be stamped on the inside
of the cover.
Integrated Power Module Location
396
MAINTAINING YOUR VEHICLE
Cavity
Cartridge
Fuse
Mini
Fuse
Description
1
40 Amp
Green
Power Top Feed
2
20 Amp
Yellow
AWD ECU Feed
3
10 Amp
Red
CHMSL Brake Switch
Feed
4
10 Amp
Red
Ignition Switch Feed
5
20 Amp
Yellow
Trailer Tow
6
10 Amp
Red
IOD Sw/Pwr Mir/
Ocm Steering Cntrl
Sdar/Hfm
7
30 Amp
Green
IOD Sense1
8
30 Amp
Green
IOD Sense2
Cavity
Cartridge
Fuse
Mini
Fuse
Description
9
40 Amp
Green
Power Seats
10
20 Amp
Yellow
CCN, Power Locks
11
15 Amp
Lt Blue
Power Outlet
12
20 Amp
Yellow
Ign Run/Acc Inverter
13
20 Amp
Yellow
Pwr run/Acc Outlet
RR
14
10 Amp
Red
IOD CCN/ Interior
Lighting
15
50 Amp
Red
RAD Fan Relay Bat-
tery Feed
16
15 Amp
Lt. Blue
IGN Run/Acc Cigar
Ltr/Sunroof
MAINTAINING YOUR VEHICLE
397
7
Cavity
Cartridge
Fuse
Mini
Fuse
Description
17
10 Amp
Red
IOD Feed CVT Mod/
Mod_Wcm
18
40 Amp
Green
ASD Relay Contact
PWR Feed
19
20 Amp
Yelow
PWR Amp 1 & Amp
2 Feed
20
15 Amp
Lt. Blue
IOD Feed Radio
21
10 Amp
Red
IOD Feed Intrus
Mod/Siren
22
10 Amp
Red
IGN RUN Hvac/
Compass Sensor
23
15 Amp
Lt. Blue
ENG ASD Relay Feed
3
24
25 Amp
Natural
PWR Sunroof Feed
Cavity
Cartridge
Fuse
Mini
Fuse
Description
25
10 Amp
Red
Heated Mirror
26
15 Amp
Lt. Blue
ENG ASD Relay Feed
2
27
10 Amp
Red
IGN RUN Only ORC
Feed
28
10 Amp
Red
IGN RUN ORC/OCM
Feed
29
EMPTY
30
20 Amp
Yellow
Heated Seats
31
10 Amp
Red
Headlamp Washer
Relay Control
32
30 Amp
Pink
ENG ASD Control
Feed 1
398
MAINTAINING YOUR VEHICLE
Cavity
Cartridge
Fuse
Mini
Fuse
Description
33
10 Amp
Red
ABS MOD/J1962
Conn/PCM
34
30 Amp
Pink
ABS Valve Feed
35
40 Amp
Green
ABS Pump Feed
36
30 Amp
Pink
Headlamp Washer
Control
37
25 Amp
Natural
Spare
CAUTION!
When installing the Integrated Power Module
cover, it is important to ensure the cover is prop-
erly positioned and fully latched. Failure to do so
may allow water to get into the Integrated Power
Module, and possibly result in a electrical system
failure.
When replacing a blown fuse, it is important to
use
only
a
fuse
having
the
correct
amperage
rating. The use of a fuse with a rating other than
indicated may result in a dangerous electrical
system overload. If a properly rated fuse contin-
ues to blow, it indicates a problem in the circuit
that must be corrected.
MAINTAINING YOUR VEHICLE
399
7