Dodge Ram 3500 - 2007 Fuse Box Diagram

Dodge Ram 3500 - 2007 Fuse Box Diagram

The light flickers or comes on and remains on while
driving.
NOTE:
If the speedometer, tachometer or any engine
related gauges are not working, the airbag control mod-
ule may also be disabled. The airbags may not be ready
to inflate for your protection. Promptly check fuse block
for blown fuses. Refer to the label located on the inside of
the fuse block cover for the proper airbag fuses. See your
dealer if the fuse is good.
Event Data Recorder (EDR)
In the event of an airbag deployment, your vehicle is
designed to record up to 2-seconds of specific vehicle
data parameters (see the following list) in the event data
recorder prior to the moment of airbag deployment.
Please note that such data are ONLY recorded if an airbag
deploys, and are otherwise unavailable. In conjunction
with other data gathered during a complete accident
investigation,
the
electronic
data
may
be
used
by
DaimlerChrysler Corporation and others to learn more
about the possible causes of crashes and associated
injuries in order to assess and improve vehicle perfor-
mance. In addition to crash investigations initiated by
DaimlerChrysler Corporation, such investigations may
be requested by customers, insurance carriers, govern-
ment officials, and professional crash researchers, such as
those associated with universities, and with hospital and
insurance organizations.
In the event that an investigation is undertaken by
DaimlerChrysler Corporation (regardless of initiative),
the company or its designated representative will first
obtain permission of the appropriate custodial entity for
the vehicle (usually the vehicle owner or lessee) before
accessing the electronic data stored, unless ordered to
download data by a court with legal jurisdiction (i.e.,
pursuant to a warrant). A copy of the data will be
provided to the custodial entity upon request. General
data that does not identify particular vehicles or crashes
58
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE
Maintaining Your Airbag Systems
WARNING!
Modifications to any part of the airbag system
could cause it to fail when you need it. You could be
injured because the airbags are not there to protect
you. Do not modify the components or wiring,
including adding any kind of badges or stickers to
the steering wheel hub trim cover or the upper right
side of the instrument panel. Do not modify the
front bumper, vehicle body structure, or frame.
You need proper knee impact protection in a
collision. Do not mount or locate any aftermarket
equipment on or behind the knee bolster.
It is dangerous to try to repair any part of the
airbag system yourself. Be sure to tell anyone who
works on your vehicle that it has airbags.
Airbag Light
You will want to have the airbags ready to
inflate for your protection in an impact. While
the airbag system is designed to be mainte-
nance free, if any of the following occurs, have
an authorized dealer service the system promptly:
The airbag light does not come on or flickers during
the 6 to 8 seconds when the ignition switch is first
turned on.
The light remains on or flickers after the 6 to 8 second
interval.
The light flickers or comes on and remains on while
driving.
NOTE:
If the speedometer, tachometer or any engine
related gauges are not working, the airbag control mod-
ule may also be disabled. The airbags may not be ready
to inflate for your protection. Promptly check fuse block
96
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE
for blown fuses. Refer to the label located on the inside of
the fuse block cover for the proper airbag fuses. See your
dealer if the fuse is good.
Event Data Recorder (EDR)
In the event of an airbag deployment, your vehicle is
designed to record up to 2-seconds of specific vehicle
data parameters (see the following list) in the event data
recorder prior to the moment of airbag deployment.
Please note that such data are ONLY recorded if an airbag
deploys, and are otherwise unavailable. In conjunction
with other data gathered during a complete accident
investigation,
the
electronic
data
may
be
used
by
DaimlerChrysler Corporation and others to learn more
about the possible causes of crashes and associated
injuries in order to assess and improve vehicle perfor-
mance. In addition to crash investigations initiated by
DaimlerChrysler Corporation, such investigations may
be requested by customers, insurance carriers, govern-
ment officials, and professional crash researchers, such as
those associated with universities, and with hospital and
insurance organizations.
In the event that an investigation is undertaken by
DaimlerChrysler Corporation (regardless of initiative),
the company or its designated representative will first
obtain permission of the appropriate custodial entity for
the vehicle (usually the vehicle owner or lessee) before
accessing the electronic data stored, unless ordered to
download data by a court with legal jurisdiction (i.e.,
pursuant to a warrant). A copy of the data will be
provided to the custodial entity upon request. General
data that does not identify particular vehicles or crashes
may be released for incorporation in aggregate crash
databases, such as those maintained by the US govern-
ment and various states. Data of a potentially sensitive
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE
97
2
Sunroof Maintenance
Use only a non-abrasive cleaner and a soft cloth to clean
the glass panel.
Sunroof Fully Closed
Press the switch forward and release to ensure that the
sunroof is fully closed.
ELECTRICAL POWER OUTLETS
The auxiliary electrical outlet can provide power for in
cab accessories designed for use with the standard “cigar
lighter” plug. The outlet is located in the instrument
panel below and to the right of the Climate Control
Panel. A cap is attached to the outlet base indicating
“Power Outlet” 12V-20A.
There is an additional Power Outlet inside the center
console of vehicles equipped with 40/20/40, or Bucket
front seats. There is also a Power Outlet located on the
rear of the center console for Quad Cab or Mega Cab
vehicles (only) equipped with bucket seats.
The outlet(s) has/have a fused direct feed from the
battery so it/they receive power whether the ignition is
ON or OFF.
196
UNDERSTANDING THE FEATURES OF YOUR VEHICLE
NOTE:
The odometer/trip odometer Vacuum Fluores-
cent Display may also display GASCAP, which indicates
that your gas cap is possibly loose or damaged.
The Vacuum Fluorescent Display will also display NO-
FUSE, which indicates that the IOD fuse is removed from
the Integrated Power Module.
NOTE:
There is also an engine hour function. This
indicates the total number of hours the engine has been
running. To display the engine hours perform the follow-
ing: Place the ignition in RUN, but do not start the
engine. With the odometer value displayed, hold the trip
button down for a period of 6 seconds. The odometer will
change to trip value first, then it will display the engine
hour value. The engine hours will be displayed for a
period of 30 seconds until the ignition is turned off or the
engine is started.
17. Check Gages Light
This light is part of an onboard diagnostic system
which monitors the emissions and engine control
system. If the vehicle is ready for emissions
testing the light will come on when the ignition is first
turned on and remain on, as a bulb check, until the
engine is started. If the vehicle is not ready for emissions
testing the light will come on when the ignition is first
turned on and remain on for 15 seconds, then blink for 5
seconds, and remain on until the vehicle is started. If the
bulb does not come on during starting, have the condi-
tion investigated promptly.
If this light comes on and remains on while driving, it
suggests a potential engine control problem and the need
for system service.
Although your vehicle will usually be drivable and not
need towing, see your dealer for service as soon as
possible.
UNDERSTANDING YOUR INSTRUMENT PANEL
231
4
FUSES (INTEGRATED POWER MODULE)
An integrated Power Module is located in the engine
compartment near the battery. This center contains car-
tridge fuses and mini fuses. A description of each fuse
and component may be stamped on the inside cover
otherwise the cavity number of each fuse is stamped on
the inside cover that corresponds to the following chart.
Integrated Power Module Location
492
MAINTAINING YOUR VEHICLE
Cavity
Cartridge
Fuse
Mini
Fuse
Description
1
20 Amp
Yellow
Power Outlet Console
2
20 Amp
Yellow
Cabin Compartment
Node (CCN) Door
Locks/Brake Trans-
mission Shift Inter-
lock (BTSI)
3
20 Amp
Yellow
Spare
4
15 Amp
Blue
Spare
5
20 Amp
Yellow
Power Sunroof
6
10 Amp
Red
Occupant Classifica-
tion Module (OCM)/
VIST Fan/Wastegate
Cavity
Cartridge
Fuse
Mini
Fuse
Description
7
15 Amp
Blue
Reverse Lockout Sole-
noid Battery (SRT-10
Only)
8
10 Amp
Red
Heated Mirrors
9
30 Amp
Pink
Off Road Module
Power
10
5 Amp
Orange
Trx-Off Rd Pkg Sen
(Gas Engine Only)
MAINTAINING YOUR VEHICLE
493
7
Cavity
Cartridge
Fuse
Mini
Fuse
Description
11
20 Amp
Yellow
Ignition Off Draw
(IOD)-Cabin Com-
partment Node
(CCN)/Radio/Under
Hood Lamp/Wireless
Control Module
(WCM)/Satellite Digi-
tal Audio Receiver
(SDARS)/Hands Free
Module (HFM)
12
30 Amp
Pink
Electric Brake
13
25 Amp
Natural
Power-Battery
RWAL/ABS Module
Feed
14
15 Amp
Blue
Park Lamps Left
Cavity
Cartridge
Fuse
Mini
Fuse
Description
15
20 Amp
Yellow
Trailer Park Lamps
16
15 Amp
Blue
Park Lamps Right
17
15 Amp
Blue
Spare
18
40 Amp
Green
ABS Pump
19
30 Amp
Pink
Trailer Tow
20
10 Amp
Red
Occupant Restraints
Controller (ORC) 2
21
10 Amp
Red
Occupant Restraints
Controller (ORC) Pre-
set Carrier
22
2 Amp
Gray
IGN Switch Feed
494
MAINTAINING YOUR VEHICLE
Cavity
Cartridge
Fuse
Mini
Fuse
Description
23
10 Amp
Red
Engine Control Mod-
ule (ECM)/Wireless
Control Module
(WCM)/HVC
24
20 Amp
Blue
Subwoofer Amplifier
(SRT-10 Only)
25
10 Amp
Red
Power Mirror
26
20 Amp
Yellow
Brake Switch/Center
High Mount Stop
Lamp (CHMSL)
27
40 Amp
Green
Power Seats
28
10 Amp
Red
Power Run/Start-
NCC/Wireless Con-
trol Module (WCM)/
ABS/RWAL
Cavity
Cartridge
Fuse
Mini
Fuse
Description
29
10 Amp
Red
Switches/EC Mirror/
Smart Bar
30
15 Amp
Blue
Spare
31
10 Amp
Red
PCM/Transfer Case
Brake
32
10 Amp
Red
HVAC/Ajustable
Pedals/Heated Seats
Switch LED/Exhaust
Brake
33
10 Amp
Red
Power-IGN Run Misc
34
10 Amp
Red
Spare
35
15 Amp
Blue
Cabin Compartment
Node (CCN) Illumi-
nation
MAINTAINING YOUR VEHICLE
495
7
Cavity
Cartridge
Fuse
Mini
Fuse
Description
36
25 Amp
Natural
Audio_Amplifier
37
15 Amp
Blue
Spare
38
20 Amp
Yellow
Power Outlet IP
39
10 Amp
Red
Sunroof/Seatbelt Ten-
sioner
40
20 Amp
Yellow
Cigar Lighter
41
25 Amp
Natural
Spare
42
30 Amp
Pink
Diesel PCM (Diesel
Only)
CAUTION!
When installing the Integrated Power Module
cover, it is important to ensure the cover is prop-
erly positioned and fully latched. Failure to do so
may allow water to get into the Integrated Power
Module, and possibly result in a electrical system
failure.
When replacing a blown fuse, it is important to
use
only
a
fuse
having
the
correct
amperage
rating. The use of a fuse with a rating other than
indicated may result in a dangerous electrical
system overload. If a properly rated fuse contin-
ues to blow, it indicates a problem in the circuit
that must be corrected.
496
MAINTAINING YOUR VEHICLE
VEHICLE STORAGE
If you are storing your vehicle for more than 21 days, we
recommend that you take the following steps to mini-
mize the drain on your vehicle’s battery:
Disconnect the Ignition-Off Draw fuse (I.O.D.) fuse
located in the Integrated Power Module, located in the
engine compartment. The I.O.D. cavity includes a
snap-in retainer that allows the fuse to be discon-
nected, without removing it from the fuse block.
The electronic shift transfer case should be placed in
the 4HI mode and kept in this position to minimize the
battery drain.
As an alternative to the above steps you may, discon-
nect the negative cables from both batteries.
Anytime you store your vehicle, or keep it out of
service (i.e. vacation) for two weeks or more, run the
air conditioning system at idle for about five minutes
in the fresh air and high blower setting. This will
insure adequate system lubrication to minimize the
possibility of compressor damage when the system is
started again.
NOTE:
When reinstalling the IOD fuse push firmly until
fully seated, the gages in the Instrument Cluster will do
a full sweep, when the ignition key is cycled to RUN. This
is a normal condition.
MAINTAINING YOUR VEHICLE
497
7