Lincoln MKZ Hybrid - 2017 Fuse Box Diagram

Lincoln MKZ Hybrid - 2017 Fuse Box Diagram

PRINCIPLE OF OPERATION
WARNINGS
Airbags do not inflate slowly or gently,
and the risk of injury from a deploying
airbag is the greatest close to the trim
covering the airbag module.
All occupants of your vehicle, including
the driver, should always properly wear
their safety belts, even when an airbag
supplemental restraint system is provided.
Failure to properly wear your safety belt
could seriously increase the risk of injury or
death.
Always transport children 12 years old
and under in the back seat and always
properly use appropriate child restraints.
Failure to follow this could seriously increase
the risk of injury or death.
Never place your arm over the airbag
module as a deploying airbag can
result in serious arm fractures or other
injuries.
WARNINGS
Airbags can kill or injure a child in a
child seat. Never place a rear-facing
child seat in front of an active airbag. If you
must use a forward-facing child seat in the
front seat, move the seat upon which the
child seat is installed all the way back.
Do not attempt to service, repair, or
modify the airbag supplemental
restraint systems or its fuses as you could
be seriously injured or killed. Contact your
authorized dealer as soon as possible.
Several airbag system components get
hot after inflation. To reduce the risk
of injury, do not touch them after inflation.
If the airbag has deployed, the airbag
will not function again and must be
replaced immediately. If the airbag is not
replaced, the unrepaired area will increase
the risk of injury in a crash.
The airbags are a supplemental restraint
system and are designed to work with the
safety belts to help protect the driver and
right front passenger from certain upper
body injuries. Airbags do not inflate slowly;
there is a risk of injury from a deploying
airbag.
Note:
You will hear a loud bang and see a
cloud of harmless powdery residue if an
airbag deploys. This is normal.
The airbags inflate and deflate rapidly upon
activation. After airbag deployment, it is
normal to notice a smoke-like, powdery
residue or smell the burnt propellant. This
may consist of cornstarch, talcum powder (to
lubricate the bag) or sodium compounds (for
example, baking soda) that result from the
combustion process that inflates the airbag.
Small amounts of sodium hydroxide may be
present which may irritate the skin and eyes,
but none of the residue is toxic.
44
MKZ (CC9) Canada/United States of America, enUSA, First Printing
Supplementary Restraints System
Note:
When the passenger airbag status
indicator OFF light is illuminated, the
passenger (seat mounted) side airbag may
be disabled to avoid the risk of airbag
deployment injuries.
After all occupants have adjusted their seats
and put on seatbelts, it is very important that
they continue to sit properly. A properly
seated occupant sits upright, leaning against
the seat back, and centered on the seat
cushion, with their feet comfortably extended
on the floor. Sitting improperly can increase
the chance of injury in a crash event. For
example, if an occupant slouches, lies down,
turns sideways, sits forward, leans forward
or sideways, or puts one or both feet up, the
chance of injury during a crash is greatly
increased.
The conditions listed above may cause the
weight of a properly seated occupant to be
incorrectly interpreted by the front passenger
sensing system. The person in the front
passenger seat may appear heavier or lighter
due to the conditions described in the list
above.
To know if the front passenger
sensing system is operating
properly, See
Crash Sensors and
Airbag Indicator
(page 52).
Do not attempt to repair or service the
system. Take your vehicle immediately to an
authorized dealer.
If it is necessary to modify an advanced front
airbag system to accommodate a person
with disabilities, contact the Ford Customer
Relationship Center. See
Getting the
Services You Need
(page 267).
SIDE AIRBAGS
WARNINGS
Do not place objects or mount
equipment on or near the airbag cover,
on the side of the seatbacks (of the front
seats), or in front seat areas that may come
into contact with a deploying airbag. Failure
to follow these instructions may increase the
risk of personal injury in the event of a crash.
WARNINGS
Do not use accessory seat covers. The
use of accessory seat covers may
prevent the deployment of the side airbags
and increase the risk of injury in an accident.
Do not lean your head on the door. The
side airbag could injure you as it
deploys from the side of the seatback.
Do not attempt to service, repair, or
modify the airbag, its fuses or the seat
cover on a seat containing an airbag as you
could be seriously injured or killed. Contact
your authorized dealer as soon as possible.
If the side airbag has deployed, the
airbag will not function again. The side
airbag system (including the seat) must be
inspected and serviced by an authorized
dealer. If the airbag is not replaced, the
unrepaired area will increase the risk of injury
in a crash.
49
MKZ (CC9) Canada/United States of America, enUSA, First Printing
Supplementary Restraints System
SAFETY CANOPY
WARNINGS
Do not place objects or mount
equipment on or near the headliner at
the siderail that may come into contact with
a deploying curtain airbag. Failure to follow
these instructions may increase the risk of
personal injury in the event of a crash.
Do not lean your head on the door. The
curtain airbag could injure you as it
deploys from the headliner.
Do not attempt to service, repair, or
modify the curtain airbags, its fuses,
the A, B, or C pillar trim, or the headliner on
a vehicle containing curtain airbags as you
could be seriously injured or killed. Contact
your authorized dealer as soon as possible.
All occupants of your vehicle including
the driver should always wear their
safety belts even when an airbag
supplemental restraint system and curtain
airbag is provided. Failure to properly wear
your safety belt could seriously increase the
risk of injury or death.
WARNINGS
To reduce risk of injury, do not obstruct
or place objects in the deployment
path of the curtain airbag.
If the curtain airbags have deployed,
the curtain airbags will not function
again. The curtain airbags (including the A,
B and C pillar trim and headliner) must be
inspected and serviced by an authorized
dealer. If the curtain airbag is not replaced,
the unrepaired area will increase the risk of
injury in a crash.
The Safety Canopy will deploy during
significant side crashes or when a certain
likelihood of a rollover event is detected by
the rollover sensor. The Safety Canopy is
mounted to the roof side-rail sheet metal,
behind the headliner, above each row of
seats. In certain sideways crashes or rollover
events, the Safety Canopy will be activated,
regardless of which seats are occupied. The
Safety Canopy is designed to inflate between
the side window area and occupants to
further enhance protection provided in side
impact crashes and rollover events.
E75004
The system consists of the following:
Safety canopy curtain airbags located
above the trim panels over the front and
rear side windows identified by a label
or wording on the headliner or roof-pillar
trim.
A flexible headliner which opens above
the side doors to allow air curtain
deployment
· Crash sensors and monitoring
system with a readiness indicator.
See
Crash Sensors and Airbag
Indicator
(page 52).
51
MKZ (CC9) Canada/United States of America, enUSA, First Printing
Supplementary Restraints System
12 Volt DC Power Point
WARNINGS
Do not plug optional electrical
accessories into the cigar lighter
socket. Incorrect use of the cigar lighter can
cause damage not covered by the vehicle
warranty, and can result in fire or serious
injury.
Do not use a power point for operating
a cigar lighter.
Incorrect use of the
power points can cause damage not covered
by the vehicle warranty, and can result in fire
or serious injury.
Note:
When you switch the ignition on, you
can use the socket to power 12 volt
appliances with a maximum current rating
of 15 amps.
If the power supply does not work after you
switch the ignition off, switch the ignition on.
Note:
Do not hang any accessory from the
accessory plug.
Note:
Do not use the power point over the
vehicle capacity of 12 volt DC 180 watts or
a fuse may blow.
Note:
Always keep the power point caps
closed when not in use.
Do not insert objects other than an accessory
plug into the power point.
This will damage
the power point and blow the fuse.
Run the vehicle for full capacity use of the
power point.
To prevent the battery from running out of
charge:
Do not use the power point longer than
necessary when the vehicle is not
running.
Do not leave devices plugged in
overnight or when you park your vehicle
for extended periods.
Locations
Power points may be in the following
locations:
On the front of the center console.
Inside the center console.
On the rear of the center console.
110 Volt AC Power Point
(If Equipped)
WARNING
Do not keep electrical devices plugged
in the power point whenever the
device is not in use. Do not use any
extension cord with the 110 volt AC power
point, since it will defeat the safety protection
design. Doing so may cause the power point
to overload due to powering multiple devices
that can reach beyond the 150 watt load limit
and could result in fire or serious injury.
Note:
The power point will turn off when the
ignition is switched off or the battery voltage
drops below 11 volts.
156
MKZ (CC9) Canada/United States of America, enUSA, First Printing
Auxiliary Power Points
TOWING A TRAILER
WARNINGS
Do not exceed the GVWR or the
GAWR specified on the certification
label.
Towing trailers beyond the
maximum recommended gross
trailer weight exceeds the limit of your
vehicle and could result in engine
damage, transmission damage,
structural damage, loss of vehicle
control, vehicle rollover and personal
injury.
Note:
There may be electrical items
such as fuses or relays that can affect
trailer towing operation. See
Fuses
(page 275).
The load capacity of your vehicle is
designated by weight not volume. You
may not necessarily be able to use all
available space when loading your
vehicle or trailer.
Towing a trailer places extra load on the
engine, transmission, axle, brakes, tires,
and suspension. Inspect these
components before, during and after
towing.
Load Placement
To help minimize how trailer movement
affects the vehicle when driving:
Load the heaviest items closest to
the trailer floor.
Load the heaviest items in the center
of the left and right side trailer tires.
Load the heaviest items above the
trailer axles or just slightly forward
toward the trailer tongue. Do not
allow the final trailer tongue weight
to go above or below 10-15% of the
loaded trailer weight.
Select a ball mount with the correct
rise or drop. When both the loaded
vehicle and trailer are connected, the
trailer frame should be level, or
slightly angled down toward the
vehicle, when viewed from the side.
When driving with a trailer or payload, a
slight takeoff vibration or shudder may
be present due to the increased payload
weight. Additional information regarding
proper trailer loading and setting your
vehicle up for towing is located in the
Load Carrying chapter. See
Load Limit
(page 244).
You can also find information in the
RV
& Trailer Towing Guide
available at your
authorized dealer, or online.
249
MKZ (CC9) Canada/United States of America, enUSA, First Printing
Towing
Park the booster vehicle close to the hood
of the disabled vehicle, making sure the two
vehicles do not touch.
Connecting the Jumper Cables
WARNINGS
Do not attach the cables to fuel lines,
engine rocker covers, the intake
manifold or electrical components as
grounding points. Stay clear of moving parts.
To avoid reverse polarity connections, make
sure that you correctly identify the positive
(+) and negative (-) terminals on both the
disabled and booster vehicles before
connecting the cables.
Do not attach the end of the positive
cable to the studs or L-shaped eyelet
located above the positive (+) terminal of
your vehicle
s battery. High current may flow
through and cause damage to the fuses.
Do not connect the end of the second
cable to the negative (-) terminal of the
battery to be jumped. A spark may cause an
explosion of the gases that surround the
battery.
E226509
A. Negative prong (
)
B. Positive prong (+)
Note:
Remove the red cap from the positive
prong (B) on your vehicle before connecting
the cables.
4
2
1
3
E142664
Note:
In the illustration, the bottom vehicle
represents the booster vehicle.
262
MKZ (CC9) Canada/United States of America, enUSA, First Printing
Roadside Emergencies
FUSE SPECIFICATION CHART
Power Distribution Box
WARNINGS
Always disconnect the battery before
servicing high-current fuses.
WARNINGS
To reduce risk of electrical shock,
always replace the cover to the power
distribution box before reconnecting the
battery or refilling fluid reservoirs.
The power distribution box is in the engine
compartment. It has high-current fuses that
protect your vehicle's main electrical systems
from overloads.
If you disconnect and reconnect the battery,
you will need to reset some features. See
Changing the 12V Battery
(page 312).
275
MKZ (CC9) Canada/United States of America, enUSA, First Printing
Fuses
E190797
276
MKZ (CC9) Canada/United States of America, enUSA, First Printing
Fuses
Protected components
Fuse amp rating
Fuse or relay number
Moonroof.
30A
3
1
Starter relay.
-
2
Rain sensor.
15A
1
3
Blower motor relay.
-
4
Power point 3 - Back of console.
20A
3
5
Not used.
-
6
Powertrain control module - vehicle power 1.
20A
1
7
Powertrain control module power.
Powertrain control module - vehicle power 2.
20A
1
8
Emissions components.
Powertrain control module relay.
-
9
Power point 1 - driver front.
20A
3
10
Powertrain control module - vehicle power 4.
15A
2
11
Ignition coils.
Powertrain control module - vehicle power 3.
15A
2
12
277
MKZ (CC9) Canada/United States of America, enUSA, First Printing
Fuses
Protected components
Fuse amp rating
Fuse or relay number
Non-emissions components.
Not used.
-
13
Not used.
-
14
Run-start relay.
-
15
Power point 2 - console.
20A
3
16
Not used.
-
17
Right hand side headlamp ballast.
20A
1
18
Run-start electronic power assist steering.
10A
1
19
Run-start lighting.
10A
1
20
Adaptive cruise control.
Run-start transmission control.
15A
1
21
Transmission oil pump start-stop.
Air conditioner clutch solenoid.
10A
1
22
Run-start: Blind spot information system, Rear view camera,
All-wheel drive (3.0L engine), Heads-up display, shifter.
15A
1
23
Voltage stability module.
278
MKZ (CC9) Canada/United States of America, enUSA, First Printing
Fuses
Protected components
Fuse amp rating
Fuse or relay number
Not used.
-
24
Run-start anti-lock brake system.
10A
2
25
Run-start powertrain control module.
10A
2
26
Not used.
-
27
Not used.
-
28
Not used.
-
29
Not used.
-
30
Not used.
-
31
Electric fan #1 relay.
-
32
Air conditioner clutch relay.
-
33
Not used.
-
34
Not used.
-
35
Not used.
-
36
Not used.
-
37
Electric fan 2 relay.
-
38
279
MKZ (CC9) Canada/United States of America, enUSA, First Printing
Fuses
Protected components
Fuse amp rating
Fuse or relay number
Electric fan coil 2 and 3 relay.
-
39
Horn relay.
-
40
Not used.
-
41
Fuel pump relay coil.
-
42
Not used.
-
43
Left hand side headlamp ballast.
20A
1
44
USB smart charger.
5A
1
45
Not used.
46
Not used.
47
Not used.
48
Not used.
49
Horn.
20A
1
50
Not used.
-
51
Not used.
-
52
280
MKZ (CC9) Canada/United States of America, enUSA, First Printing
Fuses
Protected components
Fuse amp rating
Fuse or relay number
Multi-contour seats.
10A
1
53
Brake on-off switch.
10A
2
54
Alt sensor.
10A
2
55
1
Micro fuse.
2
Dual micro fuse.
3
M-type fuse.
Power Distribution Box - Bottom
There are fuses located on the bottom of the
fuse box. To access the bottom of the fuse
box, do the following:
281
MKZ (CC9) Canada/United States of America, enUSA, First Printing
Fuses
E145983
1.
Release the two latches, located on both
sides of the fuse box.
2.
Raise the inboard side of the fuse box
from the cradle.
3.
Move the fuse box toward the center of
the engine compartment.
4.
Pivot the outboard side of the fuse box
to access the bottom side.
282
MKZ (CC9) Canada/United States of America, enUSA, First Printing
Fuses
E190798
283
MKZ (CC9) Canada/United States of America, enUSA, First Printing
Fuses
Protected components
Fuse amp rating
Fuse or relay number
Not used.
56
Not used.
-
57
Fuel pump feed.
30A
1
58
Electric fan 3 (2.0L engine).
30A
2
59
Electric fan 3 (3.0L engine).
40A
2
Electric fan 1 (2.0L engine).
30A
2
60
Electric fan 1 (3.0L engine).
40A
2
Not used.
-
61
Body control module 1.
50A
2
62
Electric fan 2 (2.0L engine).
25A
1
63
Electric fan 2 (3.0L engine).
30A
1
All-wheel drive (torque vectoring).
30A
1
64
284
MKZ (CC9) Canada/United States of America, enUSA, First Printing
Fuses
Protected components
Fuse amp rating
Fuse or relay number
Front heated seat.
20A
1
65
Heated wiper park.
15A
1
66
Body control module 2.
50A
2
67
Heated rear window.
40A
1
68
Anti-lock brake system valves.
30A
1
69
Passenger seat.
30A
1
70
Not used.
-
71
Transmission oil pump.
20A
1
72
Rear climate controlled seats.
20A
1
73
Driver seat module.
30A
1
74
Wiper motor 1.
25A
1
75
Power decklid module.
30A
1
76
285
MKZ (CC9) Canada/United States of America, enUSA, First Printing
Fuses
Protected components
Fuse amp rating
Fuse or relay number
Front climate controlled seats.
30A
1
77
Not used.
-
78
Blower motor.
40A
2
79
Wiper motor 2.
25A
1
80
Inverter.
40A
1
81
Not used.
82
Transmission Range Control Module shifter.
20A
1
83
Starter solenoid.
30A
1
84
Wide open panoramic roof 2.
30A
1
85
Not used.
-
86
Anti-lock brake system pump.
60A
2
87
1
M-type fuse.
2
J-type fuse.
286
MKZ (CC9) Canada/United States of America, enUSA, First Printing
Fuses
Passenger Compartment Fuse Panel
The fuse panel is under the instrument panel
to the left of the steering column.
E145984
287
MKZ (CC9) Canada/United States of America, enUSA, First Printing
Fuses
Protected components
Fuse amp rating
Fuse or relay number
Lighting (ambient, glove box, vanity, dome, trunk).
10A
1
1
Lumbar.
7.5A
1
2
Driver door unlock.
20A
1
3
Not used (spare).
5A
1
4
Subwoofer amplifier.
20A
1
5
Not used (spare).
10A
2
6
Not used (spare).
10A
2
7
Not used (spare).
10A
2
8
Rear seat entertainment module.
10A
2
9
Power trunk logic.
5A
2
10
Keypad.
Cellphone passport module.
288
MKZ (CC9) Canada/United States of America, enUSA, First Printing
Fuses
Protected components
Fuse amp rating
Fuse or relay number
Not used (spare).
5A
2
11
Climate control, Gear shift.
7.5A
2
12
Steering wheel column.
7.5A
2
13
Cluster.
Datalink logic.
Extended power module.
10A
2
14
Datalink-Gateway module.
10A
2
15
Trunk release.
15A
1
16
Child lock.
Not used (spare).
5A
2
17
Push button stop-start.
5A
2
18
Extended power module.
7.5A
2
19
Adaptive headlamps.
7.5A
2
20
Humidity and in-car temperature sensor.
5A
2
21
289
MKZ (CC9) Canada/United States of America, enUSA, First Printing
Fuses
Protected components
Fuse amp rating
Fuse or relay number
Not used (spare).
5A
2
22
Delayed accessory (power inverter logic all smart window
logic, driver window switch).
10A
1
23
Rear sunshade.
Moonroof.
Panoramic roof.
Central lock-unlock.
20A
1
24
Driver door (window, mirror).
30A
1
25
Front passenger door (window, mirror).
30A
1
26
Moonroof.
30A
1
27
Amplifier.
20A
1
28
Rear driver side door (window).
30A
1
29
Rear passenger side door (window).
30A
1
30
Not used (spare).
15A
1
31
290
MKZ (CC9) Canada/United States of America, enUSA, First Printing
Fuses
Protected components
Fuse amp rating
Fuse or relay number
Voice control.
10A
1
32
Radio frequency receiver.
Display.
Radio.
20A
1
33
Active noise control.
CD changer.
Run-start bus (fuse #19, 20, 21, 22, 35, 36, 37, circuit breaker).
30A
1
34
Not used (spare).
5A
1
35
Continuous control damping suspension module.
15A
1
36
Auto dimming rear view mirror.
Rear heated seats.
Heated steering wheel.
20A
1
37
Not used (spare).
30A
38
1
Micro fuse.
2
Dual micro fuse.
291
MKZ (CC9) Canada/United States of America, enUSA, First Printing
Fuses
CHANGING A FUSE
Fuses
WARNING
Always replace a fuse with one that
has the specified amperage rating.
Using a fuse with a higher amperage rating
can cause severe wire damage and could
start a fire.
E217331
If electrical components in the vehicle are
not working, a fuse may have blown. Blown
fuses are identified by a broken wire within
the fuse. Check the appropriate fuses before
replacing any electrical components.
292
MKZ (CC9) Canada/United States of America, enUSA, First Printing
Fuses
Fuse Types
E207206
Fuse Type
Callout
Micro 2
A
Micro 3
B
Maxi
C
293
MKZ (CC9) Canada/United States of America, enUSA, First Printing
Fuses
Fuse Type
Callout
Mini
D
M Case
E
J Case
F
J Case Low Profile
G
294
MKZ (CC9) Canada/United States of America, enUSA, First Printing
Fuses
Engine coolant reservoir. See
Engine Coolant Check
(page 303).
A
Engine oil dipstick. See
Engine Oil Dipstick
(page 301).
B
Engine oil filler cap. See
Engine Oil Check
(page 301).
C
Brake fluid reservoir. See
Brake Fluid Check
(page 311).
D
Battery. See
Changing the 12V Battery
(page 312).
E
Engine compartment fuse box. See
Fuses
(page 275).
F
Air filter. See
Changing the Engine Air Filter
(page 319).
G
Washer system fluid reservoir. See
Washer Fluid Check
(page 312).
H
298
MKZ (CC9) Canada/United States of America, enUSA, First Printing
Maintenance
Engine coolant reservoir. See
Engine Coolant Check
(page 303).
A.
Engine oil filler cap. See
Engine Oil Check
(page 301).
B.
Engine oil dipstick. See
Engine Oil Dipstick
(page 301).
C.
Brake fluid reservoir. See
Brake Fluid Check
(page 311).
D.
Battery. See
Changing the 12V Battery
(page 312).
E.
Engine compartment fuse box. See
Fuses
(page 275).
F.
Air filter assembly. See
Changing the Engine Air Filter
(page 319).
G.
Automatic transmission dipstick. See
Automatic Transmission Fluid Check
(page 307).
H.
Washer fluid reservoir. See
Washer Fluid Check
(page 312).
I.
300
MKZ (CC9) Canada/United States of America, enUSA, First Printing
Maintenance