Lincoln MKZ - 2014 Fuse Box Diagram

Lincoln MKZ - 2014 Fuse Box Diagram

PRINCIPLE OF OPERATION
WARNINGS
Airbags do not inflate slowly or
gently, and the risk of injury from
a deploying airbag is the greatest
close to the trim covering the airbag
module.
All occupants of your vehicle,
including the driver, should
always properly wear their safety
belts, even when an airbag
supplemental restraint system is
provided. Failure to properly wear your
safety belt could seriously increase
the risk of injury or death.
Always transport children 12
years old and under in the back
seat and always properly use
appropriate child restraints. Failure to
follow this could seriously increase
the risk of injury or death.
Never place your arm over the
airbag module as a deploying
airbag can result in serious arm
fractures or other injuries.
Airbags can kill or injure a child
in a child seat. Never place a
rear-facing child seat in front of an
active airbag. If you must use a
forward-facing child seat in the front
seat, move the seat upon which the
child seat is installed all the way back.
Do not attempt to service, repair,
or modify the airbag
supplemental restraint systems or its
fuses as you could be seriously injured
or killed. Contact your authorized
dealer as soon as possible.
WARNINGS
Several airbag system
components get hot after
inflation. To reduce the risk of injury,
do not touch them after inflation.
If the airbag has deployed, the
airbag will not function again
and must be replaced immediately. If
the airbag is not replaced, the
unrepaired area will increase the risk
of injury in a crash.
The airbags are a supplemental
restraint system and are designed to
work with the safety belts to help
protect the driver and right front
passenger from certain upper body
injuries. Airbags do not inflate slowly;
there is a risk of injury from a
deploying airbag.
Note:
You will hear a loud bang and
see a cloud of harmless powdery
residue if an airbag deploys. This is
normal.
The airbags inflate and deflate rapidly
upon activation. After airbag
deployment, it is normal to notice a
smoke-like, powdery residue or smell
the burnt propellant. This may consist
of cornstarch, talcum powder (to
lubricate the bag) or sodium
compounds (for example, baking
soda) that result from the combustion
process that inflates the airbag. Small
amounts of sodium hydroxide may be
present which may irritate the skin
and eyes, but none of the residue is
toxic.
42
Supplementary Restraints System
WARNINGS
Do not lean your head on the
door. The side airbag could injure
you as it deploys from the side of the
seatback.
Do not attempt to service, repair,
or modify the airbag, its fuses or
the seat cover on a seat containing an
airbag as you could be seriously
injured or killed. Contact your
authorized dealer as soon as possible.
If the side airbag has deployed,
the airbag will not function again.
The side airbag system (including the
seat) must be inspected and serviced
by an authorized dealer. If the airbag
is not replaced, the unrepaired area
will increase the risk of injury in a
crash.
The side airbags are located on the
outboard side of the seatbacks of the
front seats. In certain sideways
crashes, the airbag on the side
affected by the crash will be inflated.
The airbag was designed to inflate
between the door panel and occupant
to further enhance the protection
provided occupants in side impact
crashes.
E152533
The system consists of the following:
A label or embossed side panel
indicating that side airbags are
fitted to your vehicle.
Side airbags located inside the
driver and front passenger
seatbacks.
Front passenger sensing system.
·Crash sensors and
monitoring system with
readiness indicator. See
Crash Sensors and Airbag
Indicator
(page 50).
Note:
The passenger sensing system
will deactivate the passenger
seat-mounted side airbag if it detects
an empty passenger seat.
The design and development of the
side airbag system included
recommended testing procedures
that were developed by a group of
automotive safety experts known as
the Side Airbag Technical Working
Group. These recommended testing
procedures help reduce the risk of
injuries related to the deployment of
side airbags.
SIDE CURTAIN AIRBAGS
WARNINGS
Do not place objects or mount
equipment on or near the
headliner at the siderail that may
come into contact with a deploying
side curtain airbag. Failure to follow
these instructions may increase the
risk of personal injury in the event of
a crash.
48
Supplementary Restraints System
WARNINGS
Do not lean your head on the
door. The side curtain airbag
could injure you as it deploys from the
headliner.
Do not attempt to service, repair,
or modify the side curtain
airbags, its fuses, the A, B, or C pillar
trim, or the headliner on a vehicle
containing side curtain airbags.
Contact your authorized dealer as
soon as possible.
All occupants of the vehicle
including the driver should
always wear their safety belts even
when an airbag supplemental
restraint system and side curtain
airbag is provided.
To reduce risk of injury, do not
obstruct or place objects in the
deployment path of the side curtain
airbag.
If the side curtain airbags have
deployed, the side curtain
airbags will not function again. The
side curtain airbags (including the A,
B and C pillar trim and headliner)
must be inspected and serviced by an
authorized dealer. If the side curtain
airbag is not replaced, the unrepaired
area will increase the risk of injury in a
crash.
The side curtain airbags will deploy
during significant side crashes. The
side curtain airbags are mounted to
the roof side-rail sheet metal, behind
the headliner, above each row of
seats. In certain sideways crashes, the
side curtain airbag on the impacted
side of the vehicle will be activated.
The side curtain airbags are designed
to inflate between the side window
area and occupants to further
enhance protection provided in side
impact crashes.
The system consists of the following:
E75004
Side curtain airbags located above
the trim panels over the front and
rear side windows identified by a
label or wording on the headliner
or roof-pillar trim.
A flexible headliner which opens
above the side doors to allow side
air curtain deployment.
Crash sensors and
monitoring system with
readiness indicator. See
Crash Sensors and Airbag
Indicator
(page 50).
Children 12 years old and under should
always be properly restrained in the
back seats. The side curtain airbags
will not interfere with children
restrained using a properly installed
child or booster seat because it is
designed to inflate downward from
the headliner above the doors along
the side window opening.
49
Supplementary Restraints System
12 Volt DC Power Point
WARNING
Do not plug optional electrical
accessories into the cigar lighter
socket (if equipped). Improper use of
the lighter can cause damage not
covered by your warranty, and can
result in fire or serious injury.
Note:
If used when the vehicle is not
running, the battery will discharge.
There may be insufficient power to
restart your vehicle.
Note:
Do not insert objects other than
an accessory plug into the power point.
This will damage the outlet and blow
the fuse.
Note:
Do not hang any type of
accessory or accessory bracket from
the plug.
Note:
Do not use the power point over
the vehicle capacity of 12 volt DC 180
watts or a fuse may blow.
Note:
Do not use the power point for
operating a cigar lighter element.
Note:
Improper use of the power point
can cause damage not covered by your
warranty.
Note:
Always keep the power point
caps closed when not in use.
Run the vehicle for full capacity use
of the power point. To prevent the
battery from discharging accidentally:
Do not use the power point longer
than necessary when the vehicle
is not running.
Do not leave devices plugged in
overnight or when you park your
vehicle for extended periods.
Locations
Power points may be in the following
locations:
in the front of the center console
inside the center console storage
bin
on the rear of the center console.
110 Volt AC Power Point
(If
Equipped)
WARNING
Do not keep electrical devices
plugged in the power point
whenever the device is not in use. Do
not use any extension cord with the
110 volt AC power point, since it will
defeat the safety protection design.
Doing so my cause the power point to
overload due to powering multiple
devices that can reach beyond the 150
watt load limit and could result in fire
or serious injury.
Note:
Keep the vehicle running to use
the power point.
148
Auxiliary Power Points
TOWING A TRAILER
WARNINGS
Do not exceed the GVWR or
the GAWR specified on the
certification label.
Towing trailers beyond the
maximum recommended
gross trailer weight exceeds the
limit of your vehicle and could
result in engine damage,
transmission damage, structural
damage, loss of vehicle control,
vehicle rollover and personal
injury.
Note:
There may be electrical
items such as fuses or relays that
can affect trailer towing operation.
See
Fuses
(page 255).
Weight, not volume designates
your vehicle's load capacity. You
cannot necessarily use all
available space when loading a
vehicle.
Towing a trailer places an
additional load on your vehicle's
engine, transmission, axle, brakes,
tires and suspension. Inspect
these components periodically
during, and after, any towing
operation.
Load Placement
To help minimize how trailer
movement affects the vehicle
when driving:
Load the heaviest items closest
to the trailer floor.
Load the heaviest items in the
center of the left and right side
trailer tires.
Load the heaviest items above
the trailer axles or just slightly
forward toward the trailer
tongue. Do not allow the final
trailer tongue weight to go
above or below 10-15% of the
loaded trailer weight.
Select a tow bar with the
correct rise or drop. When both
the loaded vehicle and trailer
are connected, the trailer frame
should be level, or slightly
angled down toward the
vehicle, when viewed from the
side.
When driving with a trailer or
payload, a slight takeoff vibration
or shudder may be present due to
the increased payload weight.
Additional information regarding
proper trailer loading and setting
your vehicle up for towing is
located in the Load Carrying
chapter. See
Load Limit
(page
224). You can also find the
information in the
RV & Trailer
Towing Guide
, available at an
authorized dealer.
232
Towing
CHANGING A FUSE
Fuses
WARNING
Always replace a fuse with one
that has the specified amperage
rating. Using a fuse with a higher
amperage rating can cause severe
wire damage and could start a fire.
E142430
If electrical components in the vehicle
are not working, a fuse may have
blown. Blown fuses are identified by
a broken wire within the fuse. Check
the appropriate fuses before replacing
any electrical components.
Standard Fuse Amperage Rating and Color
Color
J-type fuses
M-type fuses
Dual micro
fuses
Micro fuses
Fuse rating
-
-
Tan
Tan
5A
-
-
Brown
Brown
7.5A
-
-
Red
Red
10A
-
Grey
Blue
Blue
15A
Blue
Light Blue
-
Yellow
20A
White
White
-
White
25A
Pink
Pink
-
Green
30A
Green
Green
-
-
40A
Red
-
-
-
50A
Yellow
-
-
-
60A
255
Fuses
FUSE SPECIFICATION
CHART
Power Distribution Box
WARNINGS
Always disconnect the battery
before servicing high-current
fuses.
To reduce risk of electrical shock,
always replace the cover to the
power distribution box before
reconnecting the battery or refilling
fluid reservoirs.
The power distribution box is in the
engine compartment. It has
high-current fuses that protect your
vehicle's main electrical systems from
overloads.
If you disconnect and reconnect the
battery, you will need to reset some
features. See
Changing the 12V
Battery
(page 281).
E144783
256
Fuses
Protected components
Fuse amp rating
Fuse or relay
number
Not used (spare)
25A
3
1
Starter relay
-
2
Autowipers
15A
1
3
Blower motor relay
-
4
Power point 3 - Back of console
20A
3
5
Not used
-
6
Powertrain control module - vehicle
power 1
20A
1
7
Powertrain control module - vehicle
power 2
20A
1
8
Powertrain control module relay
-
9
Power point 1 - driver front
20A
3
10
Powertrain control module - vehicle
power 4
15A
2
11
Powertrain control module - vehicle
power 3
15A
2
12
Powertrain control module - vehicle
power 5
10A
2
13
Powertrain control module - vehicle
power 6
10A
2
14
Run/start relay
-
15
Power point 2 - console
20A
3
16
Not used
-
17
Powertrain control module - keep
alive power
10A
1
18
257
Fuses
Protected components
Fuse amp rating
Fuse or relay
number
Run/start electronic power assist
steering
10A
1
19
Run/start lighting
10A
1
20
Run/start transmission control,
Transmission oil pump start/stop
15A
1
21
Air conditioner clutch solenoid
10A
1
22
Run/start: Blind spot information
system, Rear view camera, Adaptive
cruise control, Heads-up display,
Shifter
15A
1
23
Not used
-
24
Run/start anti-lock brake system
10A
2
25
Run/start powertrain control module
10A
2
26
Not used
-
27
Not used
-
28
Not used
-
29
Not used
-
30
Not used
-
31
Electronic fan #1 relay
-
32
Air conditioner clutch relay
-
33
Not used
-
34
Not used
-
35
Not used
-
36
Not used
-
37
Electronic fan #2 relay
-
38
258
Fuses
Protected components
Fuse amp rating
Fuse or relay
number
Electronic fan #3 relay
-
39
Fuel pump relay
-
40
Horn relay
-
41
Not used
-
42
Not used
-
43
Not used
-
44
Not used
-
45
Alternator
10A
2
46
Brake on/off switch
10A
2
47
Horn
20A
1
48
Mass air flow monitor
5A
1
49
Not used
-
50
Not used
-
51
Not used
-
52
Power seats
10A
1
53
Not used
-
54
Not used
-
55
1
Micro fuse
2
Dual micro fuse
3
M-type fuse
259
Fuses
Power Distribution Box - Bottom
There are fuses located on the bottom
of the fuse box. To access the bottom
of the fuse box, do the following:
E145983
1.
Release the two latches, located
on both sides of the fuse box.
2.
Raise the inboard side of the fuse
box from the cradle.
3.
Move the fuse box toward the
center of the engine compartment.
4.
Pivot the outboard side of the fuse
box to access the bottom side.
260
Fuses
E144949
Protected components
Fuse amp rating
Fuse or relay
number
Fuel pump feed
30A
1
56
Not used
-
57
Not used
-
58
500W electronic fan 3
30A
1
59
500W electronic fan 1
30A
1
60
Not used
-
61
Body control module 1
50A
2
62
500W electronic fan 2
20A
1
63
Not used
-
64
261
Fuses
Protected components
Fuse amp rating
Fuse or relay
number
Front heated seat
20A
1
65
Not used
-
66
Body control module 2
50A
2
67
Heated rear window
40A
1
68
Anti-lock brake system valves
30A
1
69
Passenger seat
30A
1
70
Not used
-
71
Panoramic roof #1
30A
1
72
Rear climate controlled seats
20A
1
73
Driver seat module
30A
1
74
Not used
-
75
Transmission oil pump #2 stop/start
20A
1
76
Front climate controlled seats
30A
1
77
Not used
-
78
Blower motor
40A
1
79
Power trunk
30A
1
80
Inverter
40A
1
81
Anti-lock brake system pump
60A
2
82
Wiper motor #1
25A
1
83
262
Fuses
Protected components
Fuse amp rating
Fuse or relay
number
Starter solenoid
30A
1
84
Panoramic roof #2
30A
1
85
1
M-type fuse
2
J-type fuse
Passenger Compartment Fuse
Panel
The fuse panel is under the instrument
panel to the left of the steering
column.
E145984
263
Fuses
Protected components
Fuse amp rating
Fuse or relay
number
Lighting (ambient, glove box, vanity,
dome, trunk)
10A
1
1
Memory seats, Lumbar, Power mirror
7.5A
1
2
Driver door unlock
20A
1
3
Not used (spare)
5A
1
4
Subwoofer amplifier, THX amplifier
20A
1
5
Not used (spare)
10A
2
6
Not used (spare)
10A
2
7
Not used (spare)
10A
2
8
Not used (spare)
10A
2
9
Power trunk logic, Keypad
5A
2
10
Not used (spare)
5A
2
11
Climate control, Gear shift
7.5A
2
12
Steering wheel column, Cluster,
Datalink logic
7.5A
2
13
Not used (spare)
10A
2
14
Datalink/Gateway module
10A
2
15
Trunk release
15A
1
16
Not used (spare)
5A
2
17
Ignition, Push button stop/start
5A
2
18
264
Fuses
Protected components
Fuse amp rating
Fuse or relay
number
Passenger airbag disabled indicator,
Transmission range
5A
2
19
Adaptive headlamps
5A
2
20
Humidity and in-car temperature, Rear
climate seats
5A
2
21
Occupant classification sensor
5A
2
22
Delayed accessory (power inverter
logic, moonroof logic)
10A
1
23
Central lock/unlock
30A
1
24
Driver's door (window, mirror)
30A
1
25
Front passenger's door (window,
mirror)
30A
1
26
Moonroof
30A
1
27
THX amplifier
20A
1
28
Rear driver side door (window)
30A
1
29
Rear passenger side door (window)
30A
1
30
Not used (spare)
15A
1
31
GPS, Voice control, Display, Adaptive
cruise control, Radio frequency
receiver
10A
1
32
Radio, Active noise control
20A
1
33
Run/start bus (fuse #19, 20, 21, 22, 35,
36, 37, circuit breaker)
30A
1
34
Restraints control module
5A
1
35
265
Fuses
Protected components
Fuse amp rating
Fuse or relay
number
Continuous control damping suspen-
sion, Auto-dimming rear view mirror,
Lane keeping system module
15A
1
36
All-wheel drive relay, Heated steering
wheel
15A
1
37
Rear window shade
30A
38
1
Micro fuse
2
Dual micro fuse
266
Fuses