Lincoln MKZ - 2010 Fuse Box Diagram

Lincoln MKZ - 2010 Fuse Box Diagram

2. To calibrate, press and hold the 7
and 9 radio preset buttons together
for approximately 10 seconds until
CAL appears. Release the buttons.
3. Slowly drive the vehicle in a
circle (less than 3 mph [5 km/h])
until the CAL display changes to the
direction value (N, S, E, W, etc.). It
may take up to five circles to
complete calibration.
4. The compass is now calibrated.
CENTER CONSOLE
Your vehicle may be equipped with a variety of console features. These
include:
1. Cup holders with ambient lighting
(if equipped). Slide the door open
to access the cup holders.
2. Utility compartment with aux jack
and USB port, a power point, and
removable coin holder inside and a
secondary storage bin (on hinges
inside utility compartment).
Note:
Slide the arm rest to the
rearward position to open the utility
compartment
3. Sliding arm rest.
WARNING:
Use only soft cups in the cupholder. Hard objects
can injure you in a collision.
AUXILIARY POWER POINT (12VDC)
Power outlets are designed for accessory plugs only. Do not insert
any other object in the power outlet as this will damage the
outlet and blow the fuse. Do not hang any type of accessory or
accessory bracket from the plug. Improper use of the power
outlet can cause damage not covered by your warranty.
2010 MKZ
(378)
Owners Guide, 1st Printing
USA
(fus)
Driver Controls
72
The auxiliary power point is located in the center console utility
compartment.
Do not use the power point for operating the cigarette lighter element (if
equipped).
To prevent the fuse from being blown, do not use the power point(s)
over the vehicle capacity of 12 VDC/180W. If the power point or cigar
lighter socket is not working, a fuse may have blown. Refer to
Fuses and
relays
in the
Roadside Emergencies
chapter for information on
checking and replacing fuses.
To have full capacity usage of your power point, the engine is required to
be running to avoid unintentional discharge of the battery. To prevent
the battery from being discharged:
do not use the power point longer than necessary when the engine is
not running,
do not leave battery chargers, video game adapters, computers and
other devices plugged in overnight or when the vehicle is parked for
extended periods.
Always keep the power point caps closed when not being used.
Cigar/Cigarette lighter (if
equipped)
Do not plug optional electrical
accessories into the cigarette lighter
socket. Push the door to access the
lighter.
Do not hold the lighter in with your
hand while it is heating, this will
damage the lighter element and socket. The lighter will be released from
its heating position when it is ready to be used.
Note:
Improper use of the lighter can cause damage not covered by your
warranty, and can result in fire or serious injury.
POWER WINDOWS
WARNING:
Do not leave children unattended in the vehicle and
do not let children play with the power windows. They may
seriously injure themselves.
2010 MKZ
(378)
Owners Guide, 1st Printing
USA
(fus)
Driver Controls
73
WARNING:
All occupants of the vehicle, including the driver,
should always properly wear their safety belts, even when an air
bag supplemental restraint system (SRS) is provided.
WARNING:
When possible, all children 12 years old and under
should be properly restrained in a rear seating position.
WARNING:
National Highway Traffic Safety Administration
(NHTSA) recommends a minimum distance of at least 10 inches
(25 cm) between an occupant’s chest and the driver airbag module.
WARNING:
Never place your arm over the airbag module as a
deploying airbag can result in serious arm fractures or other
injuries.
Steps you can take to properly position yourself away from the airbag:
Move your seat to the rear as far as you can while still reaching the
pedals comfortably.
Recline the seat slightly (one or two degrees) from the upright
position.
WARNING:
Do not put anything on or over the airbag module.
Placing objects on or over the airbag inflation area may cause
those objects to be propelled by the airbag into your face and torso
causing serious injury.
WARNING:
Do not attempt to service, repair, or modify the
airbag supplemental restraint system (SRS) or its fuses. See your
authorized dealer.
WARNING:
Modifying or adding equipment to the front end of
the vehicle (including frame, bumper, front end body structure
and tow hooks) may affect the performance of the airbag system,
increasing the risk of injury. Do not modify the front end of the
vehicle.
2010 MKZ
(378)
Owners Guide, 1st Printing
USA
(fus)
Seating and Safety Restraints
138
A difficulty with the system is indicated by one or more of the following:
The readiness light (same light
for front and side airbag system)
will either flash or stay lit.
The readiness light will not
illuminate immediately after ignition is turned on.
A series of five beeps will be heard. The tone pattern will repeat
periodically until the problem and/or light are repaired.
If any of these things happen, even intermittently, have the supplemental
restraint system serviced at an authorized dealer immediately. Unless
serviced, the system may not function properly in the event of a
collision.
Seat-mounted side airbag system
WARNING:
Do not place objects or mount equipment on or
near the airbag cover on the side of the seatbacks of the front
seats or in front seat areas that may come into contact with a
deploying airbag. Failure to follow these instructions may increase the
risk of personal injury in the event of a collision.
WARNING:
Do not use accessory seat covers. The use of
accessory seat covers may prevent the deployment of the side
airbags and increase the risk of injury in an accident.
WARNING:
Do not lean your head on the door. The side airbag
could injure you as it deploys from the side of the seatback.
WARNING:
Do not attempt to service, repair, or modify the
airbag SRS, its fuses or the seat cover on a seat containing an
airbag. Contact your authorized dealer as soon as possible.
WARNING:
All occupants of the vehicle should always wear
their safety belts even when an airbag SRS is provided.
How does the side airbag system work?
The design and development of the side airbag system included
recommended testing procedures that were developed by a group of
2010 MKZ
(378)
Owners Guide, 1st Printing
USA
(fus)
Seating and Safety Restraints
146
WARNING:
Do not place objects or mount equipment on or
near the side air curtain cover.
WARNING:
Do not lean your head on the door. The side airbag
could injure you as it deploys from the seat.
WARNING:
Do not attempt to service, repair, or modify the side
air curtain system, its fuses, the A, B, or C pillar trim, or the
headliner on a vehicle containing a side air curtain. See your
authorized dealer.
WARNING:
All occupants of the vehicle, including the driver,
should always wear their safety belts even when an inflatable
curtain is provided.
WARNING:
To reduce the risk of injury, do not obstruct or
place objects in the deployment zone of the inflatable curtain.
How does the side air curtain system work?
The design and development of the
side air curtain system included
recommended testing procedures
that were developed by a group of
automotive safety experts known as
the Side Airbag Technical Working
Group. These recommended testing
procedures help reduce the risk of
injuries related to the deployment of
side airbags (including side air
curtain systems).
The side air curtain system consists
of the following:
An inflatable nylon curtain with a
gas generator concealed behind
the headliner and above the
doors.
The headliner will flex to open
above the side doors to allow air curtain deployment.
2010 MKZ
(378)
Owners Guide, 1st Printing
USA
(fus)
Seating and Safety Restraints
149
If the steering wanders or pulls, check for:
an improperly inflated tire
uneven tire wear
loose or worn suspension components
loose or worn steering components
improper steering alignment
A high crown in the road or high crosswinds may also make the steering
seem to wander/pull.
BRAKE-SHIFT INTERLOCK
This vehicle is equipped with a brake-shift interlock feature that prevents
the gearshift lever from being moved from P (Park) when the ignition is
in the on position unless the brake pedal is applied. If you cannot move
the gear lever out of P (Park) when the ignition is on and the brake
pedal applied, it is possible that a fuse has blown or the vehicle’s brake
lamps are not operating properly. Refer to
Fuses and relays
in the
Roadside Emergencies
chapter.
WARNING:
Do not drive your vehicle until you verify that the
brakelamps are working.
WARNING:
Always set the parking brake fully and make sure
the gearshift is latched in P (Park). Switch the ignition to off,
and remove the key whenever you leave your vehicle.
WARNING:
If the parking brake is fully released, but the brake
warning lamp remains illuminated, the brakes may not be
working properly. See your authorized dealer.
2010 MKZ
(378)
Owners Guide, 1st Printing
USA
(fus)
Driving
210
After an accident, if the engine cranks but does not start, this switch
may have been activated.
The fuel pump shut-off switch is
located in the front passenger
footwell area in the right upper
corner.
To reset the switch:
1. Turn the ignition to the off
position.
2. Check the fuel system for leaks.
3. If no leaks are apparent, reset the
switch by pushing in on the reset
button.
4. Turn the ignition to the on
position.
5. Wait a few seconds and return
the key to off position.
6. Make another check for leaks.
FUSES AND RELAYS
Fuses
If electrical components in the
vehicle are not working, a fuse may
have blown. Blown fuses are
identified by a broken wire within
the fuse. Check the appropriate
fuses before replacing any electrical
components.
Note:
Always replace a fuse with one that has the specified amperage
rating. Using a fuse with a higher amperage rating can cause severe wire
damage and could start a fire.
15
2010 MKZ
(378)
Owners Guide, 1st Printing
USA
(fus)
Roadside Emergencies
234
Standard fuse amperage rating and color
COLOR
Fuse
rating
Mini
fuses
Standard
fuses
Maxi
fuses
Cartridge
maxi
fuses
Fuse link
cartridge
2A
Grey
Grey
3A
Violet
Violet
4A
Pink
Pink
5A
Tan
Tan
7.5A
Brown
Brown
10A
Red
Red
15A
Blue
Blue
20A
Yellow
Yellow
Yellow
Blue
Blue
25A
Natural
Natural
30A
Green
Green
Green
Pink
Pink
40A
Orange
Green
Green
50A
Red
Red
Red
60A
Blue
Yellow
Yellow
70A
Tan
Brown
80A
Natural
Black
Black
Passenger compartment fuse panel
The fuse panel is located below and to the left of the steering wheel by
the brake pedal. Remove the panel cover to access the fuses.
To remove a fuse use the fuse puller tool provided on the fuse panel
cover.
2010 MKZ
(378)
Owners Guide, 1st Printing
USA
(fus)
Roadside Emergencies
235
The fuses are coded as follows.
Fuse/Relay
Location
Fuse Amp
Rating
Protected Circuits
1
30A
Driver smart window motor
2
15A
Brake on/off switch, Center
high-mounted stop lamp
3
15A
Not used (Spare)
4
30A
Passenger front smart window
motor
5
10A
Keypad illumination, Brake shift
interlock
6
20A
Turn signal lamps
7
10A
Low beam headlamps (left)
8
10A
Low beam headlamps (right)
9
15A
Courtesy lights/Illuminated scuff
plate
2010 MKZ
(378)
Owners Guide, 1st Printing
USA
(fus)
Roadside Emergencies
236
Fuse/Relay
Location
Fuse Amp
Rating
Protected Circuits
10
15A
Backlighting, Puddle lamps
11
10A
AWD module
12
7.5A
Memory modules, Memory
seat/mirrors switches
13
5A
SYNC module
14
10A
Electronic Finish Panel (EFP)
radio and climate control buttons
module, Navigation display, Center
information display, GPS module,
Ambient lighting
15
10A
Climate control
16
15A
Not used (Spare)
17
20A
Door locks, Trunk release
18
20A
Not used (Spare)
19
25A
Not used (Spare)
20
15A
On-Board Diagnostic connector
21
15A
Fog lamps
22
15A
Front sidemarker lamps, Park
lamps, License plate lamp
23
15A
High beam headlamps
24
20A
Horn
25
10A
Demand lamps/power saver relay
26
10A
Instrument cluster battery power
27
20A
Ignition switch
28
5A
Radio crank sense circuit
29
5A
Instrument cluster ignition power
30
5A
Not used (Spare)
31
10A
Not used (Spare)
32
10A
Restraint control module
33
10A
Not used (Spare)
34
5A
Not used (Spare)
2010 MKZ
(378)
Owners Guide, 1st Printing
USA
(fus)
Roadside Emergencies
237
Fuse/Relay
Location
Fuse Amp
Rating
Protected Circuits
35
10A
Rear park assist, Blind spot
monitor system, Rear video
camera, AWD
36
5A
Passive Anti-Theft Sensor (PATS)
transceiver
37
10A
Not used (Spare)
38
20A
Subwoofer amplifier
39
20A
Radio
40
20A
Not used (Spare)
41
15A
Automatic dimming mirror, Moon
roof, Compass, Front windows
42
10A
Electronic stability control,
Adaptive headlamps
43
10A
Rain sensor
44
10A
Fuel diode/Powertrain control
module
45
5A
Heated backlight and blower relay
coil, Wiper washer
46
7.5A
Occupant Classification Sensor
(OCS) module, Passenger airbag
off lamp
47
30A Circuit
Breaker
Rear windows
48
Delayed accessory relay
Power distribution box
The power distribution box is located in the engine compartment. The
power distribution box contains high-current fuses that protect your
vehicle’s main electrical systems from overloads.
WARNING:
Always disconnect the battery before servicing high
current fuses.
2010 MKZ
(378)
Owners Guide, 1st Printing
USA
(fus)
Roadside Emergencies
238
WARNING:
To reduce risk of electrical shock, always replace
the cover to the Power Distribution Box before reconnecting the
battery or refilling fluid reservoirs.
If the battery has been disconnected and reconnected, refer to the
Battery
section of the
Maintenance and Specifications
chapter.
The high-current fuses are coded as follows.
Fuse/Relay
Location
Fuse Amp
Rating
Protected Circuits
1
Not used
2
Not used
3
40A*
Powertrain control module (PCM)
(relay 57 power)
4
Not used
5
30A*
Starter motor (relay 55 power)
6
40A*
Rear defrost (relay 53 power)
7
Not used
8
40A*
Anti-lock Brake System (ABS)
pump
9
20A*
Wipers washer
2010 MKZ
(378)
Owners Guide, 1st Printing
USA
(fus)
Roadside Emergencies
239
Fuse/Relay
Location
Fuse Amp
Rating
Protected Circuits
10
30A*
ABS valves
11
Not used
12
30A*
Heated/cooled seats
13
Not used
14
Not used
15
Not used
16
15A**
Transmission module
17
10A**
Alternator
18
Not used
19
Not used
20
20A*
Audio amplifier
21
20A*
Audio amplifier
22
20A*
Console power point
23
10A**
PCM – Keep alive power, Canister
vent
24
Not used
25
10A**
A/C clutch (relay 43 power)
26
15A**
Left headlamp (relay 42 power)
27
15A**
Right headlamp (relay 44 power)
28
80A*
Cooling fan motor
29
20A*
Front power point
30
30A*
Fuel relay (relay 54 power)
31
30A*
Passenger power seat
32
30A*
Driver power seat
33
20A*
Moon roof motor power feed
34
Not used
35
40A*
Front A/C blower motor (relay 52
power)
36
1A Diode
Fuel pump
37
1A Diode
One-touch start
38
10A**
Heated side mirrors
2010 MKZ
(378)
Owners Guide, 1st Printing
USA
(fus)
Roadside Emergencies
240
Fuse/Relay
Location
Fuse Amp
Rating
Protected Circuits
39
Not used
40
Not used
41
G8VA relay
Backup lamps
42
G8VA relay
Left headlamps
43
G8VA relay
A/C clutch
44
G8VA relay
Right headlamps
45
15A**
Injectors
46
15A**
PCM
47
10A**
General powertrain components,
A/C clutch, back-up lamps
48
15A**
Ignition coils
49
15A**
Emissions related powertrain
components
50
Not used
51
Not used
52
Full ISO relay
Blower motor relay
53
Full ISO relay
Rear defrost relay
54
Full ISO relay
Fuel relay
55
Full ISO relay
Starter relay
56
Not used
57
Full ISO relay
PCM relay
58
Not used
* Cartridge Fuses ** Mini Fuses
CHANGING THE TIRES
If you get a flat tire while driving, do not apply the brake heavily.
Instead, gradually decrease your speed. Hold the steering wheel firmly
and slowly move to a safe place on the side of the road.
Note:
The tire pressure monitoring system (TPMS) indicator light will
illuminate when the spare tire is in use. To restore the full functionality
of the monitoring system, all road wheels equipped with tire pressure
monitoring sensors must be mounted on the vehicle.
Have a flat serviced by an authorized dealer in order to prevent damage
to the TPMS sensors, refer to
Tire pressure monitoring system
2010 MKZ
(378)
Owners Guide, 1st Printing
USA
(fus)
Roadside Emergencies
241
AUXILIARY POWER POINT (12VDC)
Power outlets are designed for accessory plugs only. Do not insert
any other object in the power outlet as this will damage the
outlet and blow the fuse. Do not hang any type of accessory or
accessory bracket from the plug. Improper use of the power
outlet can cause damage not covered by your warranty.
The auxiliary power point is located in the center console utility
compartment.
Do not use the power point for operating the cigarette lighter element (if
equipped).
To prevent the fuse from being blown, do not use the power point(s)
over the vehicle capacity of 12 VDC/180W. If the power point or cigar
lighter socket is not working, a fuse may have blown. Refer to
Fuses and
relays
in the
Roadside Emergencies
chapter for information on
checking and replacing fuses.
To have full capacity usage of your power point, the engine is required to
be running to avoid unintentional discharge of the battery. To prevent
the battery from being discharged:
do not use the power point longer than necessary when the engine is
not running,
do not leave battery chargers, video game adapters, computers and
other devices plugged in overnight or when the vehicle is parked for
extended periods.
Always keep the power point caps closed when not being used.
POWER WINDOWS
WARNING:
Do not leave children unattended in the vehicle and
do not let children play with the power windows. They may
seriously injure themselves.
WARNING:
When closing the power windows, you should verify
they are free of obstructions and ensure that children and/or
pets are not in the proximity of the window openings.
Driver Controls
73
2010 MKZ
(378)
Owners Guide, 3rd Printing
USA
(fus)
WARNING:
Do not put anything on or over the airbag module.
Placing objects on or over the airbag inflation area may cause
those objects to be propelled by the airbag into your face and torso
causing serious injury.
WARNING:
Do not attempt to service, repair, or modify the
airbag supplemental restraint system (SRS) or its fuses. See your
authorized dealer.
WARNING:
Modifying or adding equipment to the front end of
the vehicle (including frame, bumper, front end body structure
and tow hooks) may affect the performance of the airbag system,
increasing the risk of injury. Do not modify the front end of the
vehicle.
Children and airbags
Children must always be properly
restrained. Accident statistics
suggest that children are safer when
properly restrained in the rear
seating positions than in the front
seating position. Failure to follow
these instructions may increase the
risk of injury in a collision.
WARNING:
Airbags can kill
or injure a child in a child
seat.
NEVER
place a rear-facing
child seat in front of an active
airbag. If you must use a
forward-facing child seat in the
front seat, move the seat all the
way back.
Seating and Safety Restraints
138
2010 MKZ
(378)
Owners Guide, 3rd Printing
USA
(fus)
WARNING:
Do not lean your head on the door. The side airbag
could injure you as it deploys from the side of the seatback.
WARNING:
Do not attempt to service, repair, or modify the
airbag SRS, its fuses or the seat cover on a seat containing an
airbag. Contact your authorized dealer as soon as possible.
WARNING:
All occupants of the vehicle should always wear
their safety belts even when an airbag SRS is provided.
How does the side airbag system work?
The design and development of the side airbag system included
recommended testing procedures that were developed by a group of
automotive safety experts known as the Side Airbag Technical Working
Group. These recommended testing procedures help reduce the risk of
injuries related to the deployment of side airbags (including side air
curtain systems).
The side airbag system consists of
the following:
An inflatable bag (airbag) with a
gas generator concealed behind
the outboard bolster of the driver
and front passenger seatbacks.
The same warning light,
electronic control and diagnostic
unit as used for the front airbags.
Two crash sensors located under
the outboard side of the front seats, attached near the floor.
Side airbags, in combination with safety belts, can help reduce the risk of
severe injuries in the event of a significant side impact collision.
The side airbags are fitted on the outboard side of the seatbacks of the
front seats. In certain lateral collisions, the airbag on the side affected by
the collision will be inflated. The airbag was designed to inflate between
the door panel and occupant to further enhance the protection provided
occupants in side impact collisions.
The airbag SRS is designed to activate when the vehicle sustains lateral
deceleration sufficient to cause the sensors to close an electrical circuit
that initiates airbag inflation.
Seating and Safety Restraints
146
2010 MKZ
(378)
Owners Guide, 3rd Printing
USA
(fus)
Side-curtain airbag system
WARNING:
Do not place
objects or mount equipment
on or near the headliner at the
siderail that may come into
contact with a deploying side air
curtain. Failure to follow these
instructions may increase the risk
of personal injury in the event of a
collision.
WARNING:
Do not place objects or mount equipment on or
near the side air curtain cover.
WARNING:
Do not lean your head on the door. The side airbag
could injure you as it deploys from the seat.
WARNING:
Do not attempt to service, repair, or modify the side
air curtain system, its fuses, the A, B, or C pillar trim, or the
headliner on a vehicle containing a side air curtain. See your
authorized dealer.
WARNING:
All occupants of the vehicle, including the driver,
should always wear their safety belts even when an inflatable
curtain is provided.
WARNING:
To reduce the risk of injury, do not obstruct or
place objects in the deployment zone of the inflatable curtain.
Seating and Safety Restraints
148
2010 MKZ
(378)
Owners Guide, 3rd Printing
USA
(fus)
improper steering alignment
A high crown in the road or high crosswinds may also make the steering
seem to wander/pull.
BRAKE-SHIFT INTERLOCK
This vehicle is equipped with a brake-shift interlock feature that prevents
the gearshift lever from being moved from P (Park) when the ignition is
in the on position unless the brake pedal is pressed.
If you cannot move the gearshift lever out of P (Park) with ignition in
the on position and the brake pedal pressed, it is possible that a fuse has
blown or the vehicle’s brake lamps are not operating properly. Refer to
Fuses and relays
in the
Roadside Emergencies
chapter.
If the fuse is not blown and the brake lamps are working properly, the
following procedure will allow you to move the gearshift lever from P
(Park):
1. Apply the parking brake, turn ignition key to off, then remove the key.
2. Using a screwdriver (or similar
tool), remove the protective cover
on the passenger side of the console
to access the brake shift interlock
lever.
3. Locate the brake shift interlock
lever through the access hole on the
shifter assembly.
4. Insert the screwdriver (or similar
tool) into the access hole, press and
hold brake shift interlock lever while pulling the gearshift lever out of the
P (Park) position and into the N (Neutral) position.
5. Remove the tool and reinstall the protective cover.
6. Apply brake pedal, start the vehicle, and release the parking brake.
See your authorized dealer as soon as possible if this procedure
is used.
WARNING:
Do not drive your vehicle until you verify that the
brake lamps are working.
R
N
D
L
Driving
210
2010 MKZ
(378)
Owners Guide, 3rd Printing
USA
(fus)
FUEL PUMP SHUT-OFF SWITCH
This device stops the electric fuel pump from sending fuel to the engine
when your vehicle has had a substantial jolt.
After an accident, if the engine cranks but does not start, this switch
may have been activated.
The fuel pump shut-off switch is
located in the front passenger
footwell area in the right upper
corner.
To reset the switch:
1. Turn the ignition to the off
position.
2. Check the fuel system for leaks.
3. If no leaks are apparent, reset the
switch by pressing in on the reset
button.
4. Turn the ignition to the on
position.
5. Wait a few seconds and return
the key to off position.
6. Make another check for leaks.
FUSES AND RELAYS
Fuses
If electrical components in the
vehicle are not working, a fuse may
have blown. Blown fuses are
identified by a broken wire within
the fuse. Check the appropriate
fuses before replacing any electrical
components.
Note:
Always replace a fuse with one that has the specified amperage
rating. Using a fuse with a higher amperage rating can cause severe wire
damage and could start a fire.
15
Roadside Emergencies
233
2010 MKZ
(378)
Owners Guide, 3rd Printing
USA
(fus)
Standard fuse amperage rating and color
COLOR
Fuse
rating
Mini
fuses
Standard
fuses
Maxi
fuses
Cartridge
maxi
fuses
Fuse link
cartridge
2A
Grey
Grey
3A
Violet
Violet
4A
Pink
Pink
5A
Tan
Tan
7.5A
Brown
Brown
10A
Red
Red
15A
Blue
Blue
20A
Yellow
Yellow
Yellow
Blue
Blue
25A
Natural
Natural
30A
Green
Green
Green
Pink
Pink
40A
Orange
Green
Green
50A
Red
Red
Red
60A
Blue
Yellow
Yellow
70A
Tan
Brown
80A
Natural
Black
Black
Passenger compartment fuse panel
The fuse panel is located below and to the left of the steering wheel by
the brake pedal. Remove the panel cover to access the fuses.
To remove a fuse use the fuse puller tool provided on the fuse panel
cover.
Roadside Emergencies
234
2010 MKZ
(378)
Owners Guide, 3rd Printing
USA
(fus)
The fuses are coded as follows.
Fuse/Relay
Location
Fuse Amp
Rating
Protected Circuits
1
30A
Driver smart window motor
2
15A
Brake on/off switch, Center
high-mounted stop lamp
3
15A
Not used (Spare)
4
30A
Passenger front smart window
motor
5
10A
Keypad illumination, Brake shift
interlock
6
20A
Turn signal lamps
7
10A
Low beam headlamps (left)
8
10A
Low beam headlamps (right)
9
15A
Courtesy lights/Illuminated scuff
plate
Roadside Emergencies
235
2010 MKZ
(378)
Owners Guide, 3rd Printing
USA
(fus)
Fuse/Relay
Location
Fuse Amp
Rating
Protected Circuits
10
15A
Backlighting, Puddle lamps
11
10A
AWD module
12
7.5A
Memory modules, Memory
seat/mirrors switches
13
5A
SYNC
±
module
14
10A
Electronic finish panel (EFP)
radio and climate control buttons
module, Navigation display, Center
information display, GPS module,
Ambient lighting
15
10A
Climate control
16
15A
Not used (Spare)
17
20A
Door locks, Trunk release
18
20A
Not used (Spare)
19
25A
Not used (Spare)
20
15A
On-Board Diagnostic connector
21
15A
Fog lamps
22
15A
Front sidemarker lamps, Park
lamps, License plate lamp
23
15A
High beam headlamps
24
20A
Horn
25
10A
Demand lamps/power saver relay
26
10A
Instrument cluster battery power
27
20A
Ignition switch
28
5A
Radio crank sense circuit
29
5A
Instrument cluster ignition power
30
5A
Not used (Spare)
31
10A
Not used (Spare)
32
10A
Restraint control module
33
10A
Not used (Spare)
34
5A
Not used (Spare)
Roadside Emergencies
236
2010 MKZ
(378)
Owners Guide, 3rd Printing
USA
(fus)
Fuse/Relay
Location
Fuse Amp
Rating
Protected Circuits
35
10A
Rear park assist, Blind spot
monitor system, Rear video
camera, AWD
36
5A
Passive anti-theft sensor (PATS)
transceiver
37
10A
Not used (Spare)
38
20A
Subwoofer amplifier
39
20A
Radio
40
20A
Not used (Spare)
41
15A
Automatic dimming mirror, Moon
roof, Compass, Front windows
42
10A
Electronic stability control,
Adaptive headlamps
43
10A
Rain sensor
44
10A
Fuel diode/Powertrain control
module
45
5A
Heated backlight and blower relay
coil, Wiper washer
46
7.5A
Occupant classification s ensor
(OCS) module, Passenger airbag
off lamp
47
30A Circuit
Breaker
Rear windows
48
Delayed accessory relay
Power distribution box
The power distribution box is located in the engine compartment. The
power distribution box contains high-current fuses that protect your
vehicle’s main electrical systems from overloads.
WARNING:
Always disconnect the battery before servicing high
current fuses.
Roadside Emergencies
237
2010 MKZ
(378)
Owners Guide, 3rd Printing
USA
(fus)
WARNING:
To reduce risk of electrical shock, always replace
the cover to the power distribution box before reconnecting the
battery or refilling fluid reservoirs.
If the battery has been disconnected and reconnected, refer to the
Battery
section of the
Maintenance and Specifications
chapter.
The high-current fuses are coded as follows.
Fuse/Relay
Location
Fuse Amp
Rating
Protected Circuits
1
Not used
2
Not used
3
40A*
Powertrain control module (PCM)
(relay 57 power)
4
Not used
5
30A*
Starter motor (relay 55 power)
6
40A*
Rear defrost (relay 53 power)
7
Not used
8
40A*
Anti-lock brake system (ABS)
pump
9
20A*
Wipers washer
Roadside Emergencies
238
2010 MKZ
(378)
Owners Guide, 3rd Printing
USA
(fus)
Fuse/Relay
Location
Fuse Amp
Rating
Protected Circuits
10
30A*
ABS valves
11
Not used
12
30A*
Heated/cooled seats
13
Not used
14
Not used
15
Not used
16
15A**
Transmission module
17
10A**
Alternator
18
Not used
19
Not used
20
20A*
Audio amplifier
21
20A*
Audio amplifier
22
20A*
Console power point
23
10A**
PCM – Keep alive power, Canister
vent
24
Not used
25
10A**
A/C clutch (relay 43 power)
26
15A**
Left headlamp (relay 42 power)
27
15A**
Right headlamp (relay 44 power)
28
80A*
Cooling fan motor
29
20A*
Front power point
30
30A*
Fuel relay (relay 54 power)
31
30A*
Passenger power seat
32
30A*
Driver power seat
33
20A*
Moon roof motor power feed
34
Not used
35
40A*
Front A/C blower motor
(relay 52 power)
36
1A Diode
Fuel pump
37
1A Diode
One-touch start
38
10A**
Heated side mirrors
Roadside Emergencies
239
2010 MKZ
(378)
Owners Guide, 3rd Printing
USA
(fus)
Fuse/Relay
Location
Fuse Amp
Rating
Protected Circuits
39
Not used
40
Not used
41
G8VA relay
Backup lamps
42
G8VA relay
Left headlamps
43
G8VA relay
A/C clutch
44
G8VA relay
Right headlamps
45
15A**
Injectors
46
15A**
PCM
47
10A**
General powertrain components,
A/C clutch, back-up lamps
48
15A**
Ignition coils
49
15A**
Emissions related powertrain
components
50
Not used
51
Not used
52
Full ISO relay
Blower motor relay
53
Full ISO relay
Rear defrost relay
54
Full ISO relay
Fuel relay
55
Full ISO relay
Starter relay
56
Not used
57
Full ISO relay
PCM relay
58
Not used
* Cartridge Fuses ** Mini Fuses
CHANGING THE TIRES
If you get a flat tire while driving, do not apply the brake heavily.
Instead, gradually decrease your speed. Hold the steering wheel firmly
and slowly move to a safe place on the side of the road.
Note:
The tire pressure monitoring system (TPMS) indicator light will
illuminate when the spare tire is in use. To restore the full functionality
of the monitoring system, all road wheels equipped with tire pressure
monitoring sensors must be mounted on the vehicle.
Have a flat serviced by an authorized dealer in order to prevent damage
to the TPMS sensors, refer to
Tire pressure monitoring system
Roadside Emergencies
240
2010 MKZ
(378)
Owners Guide, 3rd Printing
USA
(fus)