Lincoln MKX - 2016 Fuse Box Diagram

Lincoln MKX - 2016 Fuse Box Diagram

PRINCIPLE OF OPERATION
WARNINGS
Airbags do not inflate slowly or gently,
and the risk of injury from a deploying
airbag is the greatest close to the trim
covering the airbag module.
All occupants of your vehicle, including
the driver, should always properly wear
their safety belts, even when an airbag
supplemental restraint system is provided.
Failure to properly wear your safety belt
could seriously increase the risk of injury or
death.
Always transport children 12 years old
and under in the back seat and always
properly use appropriate child restraints.
Failure to follow this could seriously increase
the risk of injury or death.
Never place your arm over the airbag
module as a deploying airbag can
result in serious arm fractures or other
injuries.
WARNINGS
Airbags can kill or injure a child in a
child seat. Never place a rear-facing
child seat in front of an active airbag. If you
must use a forward-facing child seat in the
front seat, move the seat upon which the
child seat is installed all the way back.
Do not attempt to service, repair, or
modify the airbag supplemental
restraint systems or its fuses as you could
be seriously injured or killed. Contact your
authorized dealer as soon as possible.
Several airbag system components get
hot after inflation. To reduce the risk
of injury, do not touch them after inflation.
If the airbag has deployed, the airbag
will not function again and must be
replaced immediately. If the airbag is not
replaced, the unrepaired area will increase
the risk of injury in a crash.
The airbags are a supplemental restraint
system and are designed to work with the
safety belts to help protect the driver and
right front passenger from certain upper
body injuries. Airbags do not inflate slowly;
there is a risk of injury from a deploying
airbag.
Note:
You will hear a loud bang and see a
cloud of harmless powdery residue if an
airbag deploys. This is normal.
The airbags inflate and deflate rapidly upon
activation. After airbag deployment, it is
normal to notice a smoke-like, powdery
residue or smell the burnt propellant. This
may consist of cornstarch, talcum powder (to
lubricate the bag) or sodium compounds (for
example, baking soda) that result from the
combustion process that inflates the airbag.
Small amounts of sodium hydroxide may be
present which may irritate the skin and eyes,
but none of the residue is toxic.
44
MKX (CD9) Canada/United States of America, enUSA, ASO/OGC Review
Supplementary Restraints System
SIDE AIRBAGS
WARNINGS
Do not place objects or mount
equipment on or near the airbag cover,
on the side of the seatbacks (of the front
seats), or in front seat areas that may come
into contact with a deploying airbag. Failure
to follow these instructions may increase the
risk of personal injury in the event of a crash.
Do not use accessory seat covers. The
use of accessory seat covers may
prevent the deployment of the side airbags
and increase the risk of injury in an accident.
Do not lean your head on the door. The
side airbag could injure you as it
deploys from the side of the seatback.
Do not attempt to service, repair, or
modify the airbag, its fuses or the seat
cover on a seat containing an airbag as you
could be seriously injured or killed. Contact
your authorized dealer as soon as possible.
WARNINGS
If the side airbag has deployed, the
airbag will not function again. The side
airbag system (including the seat) must be
inspected and serviced by an authorized
dealer. If the airbag is not replaced, the
unrepaired area will increase the risk of injury
in a crash.
The side airbags are located on the outboard
side of the seatbacks of the front seats. In
certain sideways crashes, the airbag on the
side affected by the crash will be inflated.
The airbag was designed to inflate between
the door panel and occupant to further
enhance the protection provided occupants
in side impact crashes.
E152533
The system consists of the following:
A label or embossed side panel
indicating that side airbags are fitted to
your vehicle.
Side airbags located inside the driver and
front passenger seatbacks.
Front passenger sensing system.
·Crash sensors and monitoring
system with readiness indicator.
See
Crash Sensors and Airbag
Indicator
(page 52).
Note:
The passenger sensing system will
deactivate the passenger seat-mounted side
airbag if it detects an empty passenger seat.
50
MKX (CD9) Canada/United States of America, enUSA, ASO/OGC Review
Supplementary Restraints System
The design and development of the side
airbag system included recommended
testing procedures that were developed by
a group of automotive safety experts known
as the Side Airbag Technical Working Group.
These recommended testing procedures
help reduce the risk of injuries related to the
deployment of side airbags.
DRIVER AND PASSENGER KNEE
AIRBAGS
WARNINGS
Keep the glove box door closed while
driving for optimal performance of the
passenger knee airbag during a crash.
To reduce risk of injury, do not obstruct
or place objects in the deployment
path of the knee airbag.
A driver knee airbag is located under or
within the instrument panel. A passenger
knee airbag is located within the glove box
door. During a crash, the restraints control
module may activate the driver and
passenger knee airbags based on crash
severity and occupant conditions. Under
certain crash and occupant conditions, the
driver and passenger knee airbag may
deploy but the driver front airbag may not
activate. As with front and side airbags, it is
important to be properly seated and
restrained to reduce the risk of death or
serious injury.
Make sure the knee airbags are
operating properly. See
Crash
Sensors and Airbag Indicator
(page 52).
SAFETY CANOPY
WARNINGS
Do not place objects or mount
equipment on or near the headliner at
the siderail that may come into contact with
a deploying curtain airbag. Failure to follow
these instructions may increase the risk of
personal injury in the event of a crash.
Do not lean your head on the door. The
curtain airbag could injure you as it
deploys from the headliner.
WARNINGS
Do not attempt to service, repair, or
modify the curtain airbags, its fuses,
the A, B, C or D pillar trim, or the headliner
on a vehicle containing curtain airbags as
you could be seriously injured or killed.
Contact your authorized dealer as soon as
possible.
All occupants of your vehicle including
the driver should always wear their
safety belts even when an airbag
supplemental restraint system and curtain
airbag is provided. Failure to properly wear
your safety belt could seriously increase the
risk of injury or death.
To reduce risk of injury, do not obstruct
or place objects in the deployment
path of the curtain airbag.
If the curtain airbags have deployed,
the curtain airbags will not function
again. The curtain airbags (including the A,
B, C and D pillar trim and headliner) must be
inspected and serviced by an authorized
dealer. If the curtain airbag is not replaced,
the unrepaired area will increase the risk of
injury in a crash.
51
MKX (CD9) Canada/United States of America, enUSA, ASO/OGC Review
Supplementary Restraints System
12 Volt DC Power Point
WARNINGS
Do not plug optional electrical
accessories into the cigar lighter
socket. Incorrect use of the cigar lighter can
cause damage not covered by the vehicle
warranty, and can result in fire or serious
injury.
Do not use a power point for operating
a cigar lighter.
Incorrect use of the
power points can cause damage not covered
by the vehicle warranty, and can result in fire
or serious injury.
Note:
When you switch the ignition on, you
can use the socket to power 12 volt
appliances with a maximum current rating
of 15 amps.
If the power supply does not work after you
switch the ignition off, switch the ignition on.
Note:
Do not hang any accessory from the
accessory plug.
Note:
Do not use the power point over the
vehicle capacity of 12 volt DC 180 watts or
a fuse may blow.
Note:
Always keep the power point caps
closed when not in use.
Do not insert objects other than an accessory
plug into the power point.
This will damage
the power point and blow the fuse.
Run the vehicle for full capacity use of the
power point.
To prevent the battery from running out of
charge:
Do not use the power point longer than
necessary when the vehicle is not
running.
Do not leave devices plugged in
overnight or when you park your vehicle
for extended periods.
Locations
Power points may be in the following
locations:
On the lower instrument panel.
Inside the center console.
On the rear of the center console.
In the rear cargo area.
110 Volt AC Power Point
(If Equipped)
WARNING
Do not keep electrical devices plugged
in the power point whenever the
device is not in use. Do not use any
extension cord with the 110 volt AC power
point, since it will defeat the safety protection
design. Doing so may cause the power point
to overload due to powering multiple devices
that can reach beyond the 150 watt load limit
and could result in fire or serious injury.
Note:
The power point will turn off when the
ignition is switched off or the battery voltage
drops below 11 volts.
Use the power point for powering electric
devices that require up to 150 watts.
It is on
the rear of the center console.
163
MKX (CD9) Canada/United States of America, enUSA, ASO/OGC Review
Auxiliary Power Points
TOWING A TRAILER
WARNINGS
Do not exceed the GVWR or the
GAWR specified on the certification
label.
Towing trailers beyond the
maximum recommended gross
trailer weight exceeds the limit of your
vehicle and could result in engine
damage, transmission damage,
structural damage, loss of vehicle
control, vehicle rollover and personal
injury.
Note:
Your vehicle may have electrical
items, such as fuses or relays, related
to towing. See
Fuses
(page 284).
Your vehicle's load capacity designation
is by weight, not by volume, so you
cannot necessarily use all available
space when loading a vehicle.
Towing a trailer places an extra load on
your vehicle's engine, transmission, axle,
brakes, tires and suspension. Inspect
these components periodically during,
and after, any towing operation.
Load Placement
To help minimize how trailer movement
affects your vehicle when driving:
Load the heaviest items closest to
the trailer floor.
Load the heaviest items centered
between the left and right side trailer
tires.
Load the heaviest items above the
trailer axles or just slightly forward
toward the trailer tongue. Do not
allow the final trailer tongue weight
to go above or below 10-15% of the
loaded trailer weight.
Select a tow bar with the correct rise
or drop. When both the loaded
vehicle and trailer are connected, the
trailer frame should be level, or
slightly angled down toward your
vehicle, when viewed from the side.
When driving with a trailer or payload, a
slight takeoff vibration or shudder may
be present due to the increased payload
weight. Additional information regarding
proper trailer loading and setting your
vehicle up for towing is located in the
Load Carrying chapter. See
Load Limit
(page 251).
You can also find information in the
RV
& Trailer Towing Guide
available at your
authorized dealer, or online.
261
MKX (CD9) Canada/United States of America, enUSA, ASO/OGC Review
Towing
Park the booster vehicle close to the hood
of the disabled vehicle, making sure the two
vehicles do not touch.
Connecting the Jumper Cables
WARNINGS
Do not attach the cables to fuel lines,
engine rocker covers, the intake
manifold or electrical components as
grounding points. Stay clear of moving parts.
To avoid reverse polarity connections, make
sure that you correctly identify the positive
(+) and negative (-) terminals on both the
disabled and booster vehicles before
connecting the cables.
Do not attach the end of the positive
cable to the studs or L-shaped eyelet
located above the positive (+) terminal of
your vehicle
s battery. High current may flow
through and cause damage to the fuses.
Do not connect the end of the second
cable to the negative (-) terminal of the
battery to be jumped. A spark may cause an
explosion of the gases that surround the
battery.
Note:
In the illustration, the bottom vehicle
represents the booster vehicle.
4
2
1
3
E142664
1.
Connect the positive (+) jumper cable to
the positive (+) terminal of the discharged
battery.
2.
Connect the other end of the positive (+)
cable to the positive (+) terminal of the
booster vehicle battery.
3.
Connect the negative (-) cable to the
negative (-) terminal of the booster
vehicle battery.
4.
Make the final connection of the negative
(-) cable to an exposed metal part of the
stalled vehicle's engine, away from the
battery and the fuel injection system, or
connect the negative (-) cable to a ground
connection point if available.
Jump Starting
1.
Start the engine of the booster vehicle
and rev the engine moderately, or press
the accelerator gently to keep your
engine speed between 2000 and 3000
RPM, as shown in your tachometer.
2.
Start the engine of the disabled vehicle.
3.
Once the disabled vehicle has been
started, run both vehicle engines for an
additional three minutes before
disconnecting the jumper cables.
275
MKX (CD9) Canada/United States of America, enUSA, ASO/OGC Review
Roadside Emergencies
FUSE SPECIFICATION CHART
Power Distribution Box
WARNINGS
Always disconnect the battery before
servicing high-current fuses.
WARNINGS
To reduce risk of electrical shock,
always replace the cover to the power
distribution box before reconnecting the
battery or refilling fluid reservoirs.
The power distribution box is located in the
engine compartment. It has high-current
fuses that protect your vehicle's main
electrical systems from overloads.
If you disconnect or reconnect the battery,
some features need to be reset. See
Changing the 12V Battery
(page 316).
284
MKX (CD9) Canada/United States of America, enUSA, ASO/OGC Review
Fuses
E190797
285
MKX (CD9) Canada/United States of America, enUSA, ASO/OGC Review
Fuses
Protected Components
Fuse Amp Rating
Fuse or Relay Number
Power fold 2nd row seats.
30A
3
1
Starter relay.
2
Rear wiper.
15A
1
3
Rain sensor
Blower motor relay.
4
Power point 3 - back of console.
20A
3
5
Not used.
6
Powertrain control module - vehicle power 1.
20A
1
7
Powertrain control module - vehicle power 2.
20A
1
8
Powertrain control module relay.
9
Power point 1 - driver front.
20A
3
10
Powertrain control module - vehicle power 4.
15A
2
11
Powertrain control module - vehicle power 3.
15A
2
12
286
MKX (CD9) Canada/United States of America, enUSA, ASO/OGC Review
Fuses
Protected Components
Fuse Amp Rating
Fuse or Relay Number
Not used.
13
Not used.
14
Run-start relay.
15
Power point 2 - console bin.
20A
3
16
Power point 4 - luggage compartment.
20A
3
17
RH HID headlamp.
20A
1
18
Run-start electronic power assist steering.
10A
1
19
Run/start lighting.
10A
1
20
Transmission oil pump logic power (start/stop).
15A
1
21
Air conditioner clutch solenoid.
10A
1
22
Run-start 6.
15A
1
23
Blind spot information system.
Rear view camera.
Adaptive cruise control.
Heads-up display.
287
MKX (CD9) Canada/United States of America, enUSA, ASO/OGC Review
Fuses
Protected Components
Fuse Amp Rating
Fuse or Relay Number
Voltage quality module (start/stop).
Front split view camera.
Front split view camera module.
Not used (spare).
10A
1
24
Run-start anti-lock brake system.
10A
2
25
Run-start powertrain control module.
10A
2
26
Not used.
27
Rear washer pump.
10A
1
28
Not used.
29
Not used.
30
Not used.
31
Electronic fan 1 relay.
32
A/C clutch relay.
33
Glove box release.
15A
1
34
Not used.
35
288
MKX (CD9) Canada/United States of America, enUSA, ASO/OGC Review
Fuses
Protected Components
Fuse Amp Rating
Fuse or Relay Number
Not used.
36
Power transfer unit fan.
10A
1
37
Electronic fan 2 relay.
38
Electric fan 3 relay.
39
Horn relay.
40
Not used.
41
Fuel pump relay.
42
2nd row easy fold seat release.
10A
1
43
LH HID headlamp.
20A
1
44
Not used.
45
Not used.
46
Not used.
47
Not used.
48
Not used.
49
289
MKX (CD9) Canada/United States of America, enUSA, ASO/OGC Review
Fuses
Protected Components
Fuse Amp Rating
Fuse or Relay Number
Horn.
20A
1
50
Not used.
51
Not used.
52
Not used.
53
Brake on off switch.
10A
2
54
ALT sensor.
10A
2
55
1
Micro fuse.
2
Dual micro fuse.
3
M-type fuse.
Power Distribution Box - Bottom
There are fuses located on the bottom of the
fuse box. To access the bottom of the fuse
box, do the following:
290
MKX (CD9) Canada/United States of America, enUSA, ASO/OGC Review
Fuses
E145983
1.
Release the two latches, located on both
sides of the fuse box.
2.
Raise the inboard side of the fuse box
from the cradle.
3.
Move the fuse box toward the center of
the engine compartment.
4.
Pivot the outboard side of the fuse box
to access the bottom side.
291
MKX (CD9) Canada/United States of America, enUSA, ASO/OGC Review
Fuses
E190798
292
MKX (CD9) Canada/United States of America, enUSA, ASO/OGC Review
Fuses
Protected components
Fuse amp rating
Fuse or relay number
Not used.
56
Not used.
57
Fuel pump feed.
30A
*
58
Electronic fan 3.
40A
**
59
Electronic fan 1.
40A
**
60
Not used.
61
Body control module 1.
50A
**
62
Electronic fan 2.
25A
*
63
Not used.
64
Front heated seat.
20A
*
65
Not used.
66
Body control module 2.
50A
**
67
293
MKX (CD9) Canada/United States of America, enUSA, ASO/OGC Review
Fuses
Protected components
Fuse amp rating
Fuse or relay number
Heated rear window.
40A
*
68
Anti-lock brake system valves.
30A
*
69
Passenger seat.
30A
*
70
Active front steering.
50A
**
71
Transmission oil pump (start/stop).
20A
*
72
Rear heated seats.
20A
*
73
Driver seat module.
30A
*
74
Wiper motor 1.
25A
*
75
Power liftgate module.
30A
*
76
Climate control seat module.
30A
*
77
Trailer lighting module.
40A
*
78
Blower motor.
40A
**
79
294
MKX (CD9) Canada/United States of America, enUSA, ASO/OGC Review
Fuses
Protected components
Fuse amp rating
Fuse or relay number
Wiper motor 2.
25A
*
80
110 volt inverter.
40A
*
81
Not used.
82
TRCM (iShifter).
20A
*
83
Starter solenoid.
30A
*
84
Vista roof.
30A
*
85
Not used.
86
Anti-lock brake system pump.
60A
**
87
*
M-type fuse.
**
J-type fuse.
Passenger Compartment Fuse Panel
The fuse panel is located under the
instrument panel to the left of the steering
column.
Note:
It may be easier to access the fuse
panel if you remove the finish trim piece.
295
MKX (CD9) Canada/United States of America, enUSA, ASO/OGC Review
Fuses
E145984
Protected components
Fuse amp rating
Fuse or relay number
Demand lighting (glove box, vanity, dome).
10A
1
1
Battery saver relay coil.
296
MKX (CD9) Canada/United States of America, enUSA, ASO/OGC Review
Fuses
Protected components
Fuse amp rating
Fuse or relay number
Second row easy fold relay coil.
Memory seats.
7.5A
1
2
Lumbar.
Power mirrors.
Driver seat module logic power.
Driver door unlock.
20A
1
3
Not used (spare).
5A
1
4
Subwoofer amplifier.
20A
1
5
USB charger.
10A
2
6
Not used (spare).
10A
2
7
Not used (spare).
10A
2
8
Rear seat entertainment system module.
10A
2
9
360 camera badge.
Keypad.
5A
2
10
Power liftgate module logic power.
Hands free liftgate module.
297
MKX (CD9) Canada/United States of America, enUSA, ASO/OGC Review
Fuses
Protected components
Fuse amp rating
Fuse or relay number
MyLincoln module.
Not used (spare).
5A
2
11
Climate control module.
7.5A
2
12
Cluster.
7.5A
2
13
Steering column control module.
Smart datalink connector (gateway) module.
Not used (spare).
10A
2
14
Datalink power.
10A
2
15
Not used (spare).
15A
1
16
Not used (spare).
5A
2
17
Ignition switch.
5A
2
18
Push button start switch.
Key inhibit solenoid.
Not used (spare).
7.5A
2
19
Active front steering logic power.
7.5A
2
20
298
MKX (CD9) Canada/United States of America, enUSA, ASO/OGC Review
Fuses
Protected components
Fuse amp rating
Fuse or relay number
Humidity and in-car temperature sensor.
5A
2
21
Occupant classification sensor.
5A
2
22
Delayed accessory (power inverter logic, moonroof logic,
driver window switch power).
10A
1
23
Heads up display.
Gear shift module.
Front camera.
360 camera module.
Central lock unlock.
20A
1
24
Driver door (window, mirror).
30A
1
25
Driver door module.
Driver door lock indicator.
Driver lock switch illumination.
Front passenger door (window, mirror).
30A
1
26
Front passenger door module.
Front passenger lock indicator.
Front passenger switch illumination (window, lock).
Moonroof.
30A
1
27
299
MKX (CD9) Canada/United States of America, enUSA, ASO/OGC Review
Fuses
Protected components
Fuse amp rating
Fuse or relay number
Amplifier.
20A
1
28
Rear driver side door smart window.
30A
1
29
Rear passenger side door smart window.
30A
1
30
Not used (spare).
15A
1
31
Global positioning system module.
10A
1
32
Centerstack display.
Voice control (SYNC).
Radio transceiver module.
Multimedia gateway module.
Radio.
20A
1
33
Run-start bus (fuse 19, 20, 21, 22, 35, 36, 37, circuit breaker
38).
30A
1
34
Restraints control module.
5A
1
35
Auto-dimming rear view mirror.
15A
1
36
Heated seat.
Auto high beam/lane departure mirror module.
Rear heated seat module logic power.
300
MKX (CD9) Canada/United States of America, enUSA, ASO/OGC Review
Fuses
Protected components
Fuse amp rating
Fuse or relay number
Suspension module.
Heated steering wheel module (without active front steering).
20A
1
37
Rear power windows.
30A
3
38
Rear window switch illumination.
1
Micro fuse.
2
Dual micro fuse.
3
Circuit breaker.
CHANGING A FUSE
Fuses
WARNING
You must replace a failed fuse with one
that has the specified amperage rating.
If you use a fuse with a higher amperage
rating, you may cause severe wire damage
and may start a fire.
E142430
A fuse may fail if electrical components in
the vehicle are not properly working. A
broken wire inside the fuse indicates a failed
fuse. Check the appropriate fuses before
replacing any electrical components.
301
MKX (CD9) Canada/United States of America, enUSA, ASO/OGC Review
Fuses
UNDER HOOD OVERVIEW - 2.7L ECOBOOST
A
I
E
F
G
H
B
C
D
E188730
Engine coolant reservoir. See
Engine Coolant Check
(page 309).
A
Brake fluid reservoir. See
Brake Fluid Check
(page 315).
B
Battery. See
Changing the 12V Battery
(page 316).
C
Power distribution box. See
Fuses
(page 284).
D
Air filter assembly. See
Changing the Engine Air Filter
(page 324).
E
304
MKX (CD9) Canada/United States of America, enUSA, ASO/OGC Review
Maintenance
Engine oil dipstick. See
Engine Oil Dipstick
(page 307).
C.
Brake fluid reservoir. See
Brake Fluid Check
(page 315).
D.
Battery. See
Changing the 12V Battery
(page 316).
E.
Power distribution box. See
Fuses
(page 284).
F.
Air filter assembly. See
Changing the Engine Air Filter
(page 324).
G.
Automatic transmission dipstick (under air filter assembly). See
Automatic Transmission Fluid Check
(page 313).
H.
Windshield washer fluid reservoir. See
Washer Fluid Check
(page 315).
I.
Engine Shield
E173374
Some vehicles may be equipped with an
aero-shield under the engine. This shield
needs to be removed for service, including
oil and filter changes. The shield has four
quick-release fasteners to secure it in place.
ENGINE OIL DIPSTICK - 2.7L
ECOBOOST
E188072
A
B
Minimum.
A
Maximum.
B
307
MKX (CD9) Canada/United States of America, enUSA, ASO/OGC Review
Maintenance