Lincoln MKX - 2012 Fuse Box Diagram

Lincoln MKX - 2012 Fuse Box Diagram

CENTER CONSOLE
Your vehicle may be equipped with a variety of console features. These
include:
1. Cupholders
2. Utility compartment with in-bin
power point, removable coin holder
tray (two grooves on tray slide onto
tracks in main bin) and intelligent
access key slot.
3. Rear power point
4. An individual latch will either
open the entire armrest to access
the utility compartment or allow
each armrest to slide separately.
WARNING:
Use only soft cups in the cupholder. Hard objects
can injure you in a collision.
AUXILIARY POWER POINT (12V DC)
Power outlets are designed for accessory plugs only. Do not insert
any other object in the power outlet as this will damage the
outlet and blow the fuse. Do not hang any type of accessory or
accessory bracket from the plug. Improper use of the power
outlet can cause damage not covered by your warranty.
Auxiliary power points can be found in the following locations:
On the passenger side of the center console near the instrument panel
In the center console storage compartment
On the rear side of the center console, accessible from the rear seats
On the left rear quarter panel, accessible from the liftgate or behind
the rear seat
Do not use the power point for operating the cigarette lighter element (if
equipped).
Note:
Do not plug optional electrical accessories into the cigarette
lighter socket (if equipped). Improper use of the lighter can cause
damage not covered by your warranty, and can result in fire or serious
injury.
1
2
3
4
Driver Controls
63
2012 MKX
(mkx)
Owners Guide, 1st Printing
USA
(fus)
To prevent the fuse from being blown, do not use the power point(s)
over the vehicle capacity of 12V DC/180W. If the power point or cigar
lighter socket is not working, a fuse may have blown. Refer to
Fuses and
relays
in the
Roadside Emergencies
chapter for information on
checking and replacing fuses.
To have full capacity usage of your power point, the engine is required to
be running to avoid unintentional discharge of the battery. To prevent
the battery from being discharged:
do not use the power point longer than necessary when the engine is
not running,
do not leave battery chargers, video game adapters, computers and
other devices plugged in overnight or when the vehicle is parked for
extended periods.
Always keep the power point caps closed when not being used.
POWER WINDOWS
WARNING:
Do not leave children unattended in the vehicle and
do not let children play with the power windows. They may
seriously injure themselves.
WARNING:
When closing the power windows, you should verify
they are free of obstructions and ensure that children and/or
pets are not in the proximity of the window openings.
Press and pull the window switches
to open and close windows.
Press down (to the first detent)
and hold the switch to open.
Pull up (to the first detent) and
hold the switch to close.
Rear Window Buffeting:
When one or both of the rear windows are
open, the vehicle may demonstrate a wind throb or buffeting noise. This
noise can be alleviated by lowering a front window approximately
2–3 inches (5–8 cm).
Driver Controls
64
2012 MKX
(mkx)
Owners Guide, 1st Printing
USA
(fus)
WARNING:
Never place your arm over the airbag module as a
deploying airbag can result in serious arm fractures or other
injuries.
Steps you can take to properly position yourself away from the airbag:
Move your seat to the rear as far as you can while still reaching the
pedals comfortably.
Recline the seat slightly (one or two degrees) from the upright
position.
WARNING:
Do not put anything on or over the airbag module.
Placing objects on or over the airbag inflation area may cause
those objects to be propelled by the airbag into your face and torso
causing serious injury.
WARNING:
Do not attempt to service, repair, or modify the
airbag supplemental restraint system (SRS) or its fuses. See your
authorized dealer.
WARNING:
Modifying or adding equipment to the front end of
the vehicle (including frame, bumper, front end body structure
and tow hooks) may affect the performance of the airbag system,
increasing the risk of injury. Do not modify the front end of the
vehicle.
Seating and Safety Restraints
147
2012 MKX
(mkx)
Owners Guide, 1st Printing
USA
(fus)
WARNING:
Do not use accessory seat covers. The use of
accessory seat covers may prevent the deployment of the side
airbags and increase the risk of injury in an accident.
WARNING:
Do not lean your head on the door. The side airbag
could injure you as it deploys from the side of the seatback.
WARNING:
Do not attempt to service, repair, or modify the
airbag SRS, its fuses or the seat cover on a seat containing an
airbag. Contact your authorized dealer as soon as possible.
WARNING:
All occupants of the vehicle should always wear
their safety belts even when an airbag SRS is provided.
How does the side airbag system work?
The design and development of the side airbag system included
recommended testing procedures that were developed by a group of
automotive safety experts known as the Side Airbag Technical Working
Group. These recommended testing procedures help reduce the risk of
injuries related to the deployment of side airbags.
The side airbag system consists of
the following:
An inflatable bag (airbag) with a
gas generator concealed behind
the outboard bolster of the driver
and front passenger seatbacks.
The same warning light,
electronic control and diagnostic
unit as used for the front airbags.
The same readiness airbag light,
electronic control and diagnostic unit as used for the front airbags.
Crash sensors mounted in each front door.
Two crash sensors located at the C pillar behind the rear doors (one
on each side of the vehicle).
Side airbags, in combination with safety belts, can help reduce the risk of
severe injuries in the event of a significant side impact collision.
Seating and Safety Restraints
155
2012 MKX
(mkx)
Owners Guide, 1st Printing
USA
(fus)
The readiness light will not illuminate immediately after ignition is
turned to the on position.
A series of five beeps will be heard. The tone pattern will repeat
periodically until the problem and light are repaired.
If any of these things happen, even intermittently, have the SRS serviced
at an authorized dealer immediately. Unless serviced, the system may not
function properly in the event of a collision.
Safety Canopy
²
System
WARNING:
Do not place
objects or mount equipment
on or near the headliner at the
siderail that may come into
contact with a deploying Safety
Canopy
±
. Failure to follow these
instructions may increase the risk
of personal injury in the event of a
collision.
WARNING:
Do not lean your head on the door. The Safety
Canopy
±
could injure you as it deploys from the headliner.
WARNING:
Do not attempt to service, repair, or modify the
Safety Canopy
±
System, its fuses, the A, B, C or D pillar trim, or
the headliner on a vehicle containing a Safety Canopy
±
. See your
authorized dealer.
WARNING:
All occupants of the vehicle including the driver
should always wear their safety belts even when an airbag SRS
and Safety Canopy
±
System is provided.
Seating and Safety Restraints
157
2012 MKX
(mkx)
Owners Guide, 1st Printing
USA
(fus)
BRAKE-SHIFT INTERLOCK
This vehicle is equipped with a brake-shift interlock (BSI) feature that
prevents the gearshift lever from being moved from P (Park) when the
ignition is in the on position unless the brake pedal is pressed.
If you cannot move the gearshift lever out of P (Park) with ignition in
the on position and the brake pedal pressed, it is possible that a fuse has
blown or the vehicle’s brake lamps are not operating properly. Refer to
Fuses and relays
in the
Roadside Emergencies
chapter.
If the fuse is not blown and the brake lamps are working properly, the
following procedure will allow you to move the gearshift lever from P
(Park):
1. Apply the parking brake, turn the
ignition key to the off position, and
remove the key.
2. Using a screwdriver (or similar
tool), carefully pry off and remove
the BSI access panel.
3. Locate the brake shift interlock
lever in front of the shifter
assembly.
4. Apply the brake pedal. Gently
pull and hold the brake shift
interlock lever while pulling the
gearshift lever out of the P (Park)
position and into the N (Neutral)
position.
5. Install the trim panel.
6. Apply the brake pedal, start the vehicle, and release the parking
brake.
See your authorized dealer as soon as possible if this procedure
is used.
WARNING:
Do not drive your vehicle until you verify that the
brakelamps are working.
Driving
226
2012 MKX
(mkx)
Owners Guide, 1st Printing
USA
(fus)
FUEL PUMP SHUT-OFF
In the event of a moderate to severe collision, this vehicle is equipped
with a fuel pump shut-off feature that stops the flow of fuel to the
engine. Not every impact will cause a shut-off.
Should your vehicle shut off after a collision due to this feature, you may
restart your vehicle by doing the following:
1. Turn the ignition switch to the off position.
2. Turn the ignition switch to the on position.
In some instances the vehicle may not restart the first time you try to
restart and may take one additional attempt.
WARNING:
Failure to inspect and if necessary repair fuel leaks
after a collision may increase the risk of fire and serious injury.
Ford Motor Company recommends that the fuel system be inspected
by an authorized dealer after any collision.
FUSES AND RELAYS
Fuses
If electrical components in the
vehicle are not working, a fuse may
have blown. Blown fuses are
identified by a broken wire within
the fuse. Check the appropriate
fuses before replacing any electrical
components.
Note:
Always replace a fuse with one that has the specified amperage
rating. Using a fuse with a higher amperage rating can cause severe wire
damage and could start a fire.
15
Roadside Emergencies
256
2012 MKX
(mkx)
Owners Guide, 1st Printing
USA
(fus)
Standard fuse amperage rating and color
COLOR
Fuse
rating
Mini
fuses
Standard
fuses
Maxi
fuses
Cartridge
maxi
fuses
Fuse link
cartridge
2A
Grey
Grey
3A
Violet
Violet
4A
Pink
Pink
5A
Tan
Tan
7.5A
Brown
Brown
10A
Red
Red
15A
Blue
Blue
20A
Yellow
Yellow
Yellow
Blue
Blue
25A
Natural
Natural
Natural
Natural
30A
Green
Green
Green
Pink
Pink
40A
Orange
Green
Green
50A
Red
Red
Red
60A
Blue
Yellow
Yellow
70A
Tan
Brown
80A
Natural
Black
Black
Passenger compartment fuse panel
The fuse panel is located behind a trim panel on the left side of the
driver’s footwell near the parking brake. To remove the trim panel, slide
the release lever to the right then pull the trim panel out.
To remove the fuse panel cover, press in the tabs on both sides of the
cover, then pull the cover off.
To reinstall the fuse panel cover, place the top part of the cover on the
fuse panel, then push the bottom part of the cover until it clicks into
place. Gently pull on the cover to make sure it is secure.
To reinstall the trim panel, align the tabs on the bottom of the panel with
the grooves, push the panel shut and slide the release lever to the left to
secure the panel.
To remove a fuse, use the fuse puller tool provided on the fuse panel
cover.
Roadside Emergencies
257
2012 MKX
(mkx)
Owners Guide, 1st Printing
USA
(fus)
The fuses are coded as follows.
Fuse/Relay
Location
Fuse Amp
Rating
Protected Circuits
1
30A
Driver front smart window
2
15A
Not used (spare)
3
30A
Passenger front smart window
4
10A
Demand lamps
5
20A
Subwoofer
6
5A
RF module
7
7.5A
Power mirror switch, Memory seat
switch, Driver seat module
8
10A
Not used (spare)
9
10A
Power liftgate
10
10A
Run/accessory relay
11
10A
Instrument panel cluster,
Heads-up display
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
33
41
42
43
44
45
34
35
36
37
23
24
25
26
27
28
38
46
39
47
29
32
40
31
30
48
49
Roadside Emergencies
258
2012 MKX
(mkx)
Owners Guide, 1st Printing
USA
(fus)
Fuse/Relay
Location
Fuse Amp
Rating
Protected Circuits
12
15A
Interior lighting, Puddle lamps,
Backlighting
13
15A
Right turn/stop lamps and turn
signals
14
15A
Left turn/stop lamps and turn
signals
15
15A
Reverse lamps, Stop lamps
(high-mounted)
16
10A
Low beam headlamps (right)
17
10A
Low beam headlamps (left)
18
10A
Keypad illumination, Brake shift
interlock (BSI), , Start button
LED, Passive anti-theft system
(PATS), Powertrain control
module (PCM) wake-up, 2nd row
power enable
19
20A
Audio amplifier
20
20A
Lock/unlock relays – vehicles
without intelligent access (IA)
21
10A
Not used (spare)
22
20A
Horn relay
23
15A
Steering wheel control, Intelligent
access (IA), Headlamp switch
24
15A
Power tilt/telescope steering
column, On-board diagnostics
(OBDII)
25
15A
Liftgate release
26
5A
Global positioning system (GPS)
module
27
20A
Intelligent access (IA)
Roadside Emergencies
259
2012 MKX
(mkx)
Owners Guide, 1st Printing
USA
(fus)
Fuse/Relay
Location
Fuse Amp
Rating
Protected Circuits
28
15A
Ignition switch (without IA), Key
inhibit solenoid, Push button start
(with IA)
29
20A
Radio, Electronic finish panel,
SYNC
±
module
30
15A
Front park lamps
31
5A
Not used (spare)
32
15A
Moon roof, Power windows,
Compass/auto-dimming rear view
mirror
33
10A
Not used (spare)
34
10A
Reverse sensing system, Rearview
camera, Blind spot monitor, Rear
heated seat module
35
5A
Heads-up display
36
10A
Heated steering wheel
37
10A
Climate control
38
10A
Not used (spare)
39
15A
High beam headlamps
40
10A
Rear park lamps, License plate
lamps
41
7.5A
Occupant classification sensor
(OCS), Restraints control module
42
5A
Not used (spare)
43
10A
Not used (spare)
44
10A
Not used (spare)
45
5A
Not used (spare)
46
10A
Climate control
47
15A
Fog lamps, LED signal mirrrors
48
30A Circuit
Breaker
Power windows
49
Delayed accessory relay
Roadside Emergencies
260
2012 MKX
(mkx)
Owners Guide, 1st Printing
USA
(fus)
Power distribution box
The power distribution box is located in the engine compartment. The
power distribution box contains high-current fuses that protect your
vehicle’s main electrical systems from overloads.
WARNING:
Always disconnect the battery before servicing high
current fuses.
WARNING:
To reduce risk of electrical shock, always replace
the cover to the power distribution box before reconnecting the
battery or refilling fluid reservoirs.
If the battery has been disconnected and reconnected, refer to the
Battery
section of the
Maintenance and Specifications
chapter.
The high-current fuses are coded as follows:
Fuse/Relay
Location
Fuse Amp
Rating
Power Distribution Box
Description
1
Not used
2
Not used
3
Not used
4
30A**
Wipers
97
98
77
96
95
94
93
92
91
90
89
88
66
44
78
56
39
26
18
16
17
3
1
2
4
5
6
7
8
9
19
20
21
22
23
24
27
28
29
30
31
40
41
42
43
55
57 58 59 60 61 62 63 64 65
79 80 81 82 83 84 85 86 87
67
45
32
10
11
12
13
33
34
35
46 47 48 49 50 51
68 69 70 71 72
74
73
76
75
53
37
36
54
38
25
15
14
52
Roadside Emergencies
261
2012 MKX
(mkx)
Owners Guide, 1st Printing
USA
(fus)
Fuse/Relay
Location
Fuse Amp
Rating
Power Distribution Box
Description
5
40A**
Anti-lock brake system (ABS)
pump
6
Not used
7
30A**
Power liftgate
8
20A**
Moon roof
9
20A**
Power point #2 (console rear)
10
Not used
11
Rear window defroster/heated
mirror relay
12
Not used
13
Starter relay
14
Not used
15
Fuel pump relay
16
Not used
17
Not used
18
40A**
Blower motor
19
30A**
Starter motor
20
20A**
Power point #1 (console bin)
21
20A**
Cargo area power point
22
Not used
23
30A**
Driver seat module
24
Not used
25
Not used
26
40A**
Rear window defroster
27
20A**
Front power point/lighter
28
30A**
Climate controlled seats
29
Not used
30
30A**
Rear heated seats
31
Not used
32
Not used
33
Not used
Roadside Emergencies
262
2012 MKX
(mkx)
Owners Guide, 1st Printing
USA
(fus)
Fuse/Relay
Location
Fuse Amp
Rating
Power Distribution Box
Description
34
Blower motor relay
35
Not used
36
Rear seat relay
37
Right trailer tow (TT) stop/turn
lamps relay
38
Not used
39
40A**
Cooling fan (vehicles with TT)
60A**
Cooling fan (vehicles without TT)
40
40A**
Cooling fan (TT only)
41
Not used
42
30A**
Passenger seat
43
25A**
ABS valves
44
Rear washer relay
45
5A*
Rain sensor
46
Not used
47
Not used
48
Not used
49
Not used
50
15A*
Heated mirror
51
Not used
52
Not used
53
Left TT stop/turn lamps relay
54
Not used
55
Wiper relay
56
Not used
57
20A*
Left high-intensity discharge
(HID) headlamps
58
10A*
Alternator sensor
59
10A*
Brake on/off switch
60
Not used
61
10A*
Rear seat release
Roadside Emergencies
263
2012 MKX
(mkx)
Owners Guide, 1st Printing
USA
(fus)
Fuse/Relay
Location
Fuse Amp
Rating
Power Distribution Box
Description
62
10A*
A/C clutch
63
15A*
TT stop/turn lamps relay
64
20A*
Rear wiper motor
65
15A*
Fuel pump
66
Powertrain control module
(PCM) relay
67
20A*
Vehicle power (VPWR) #2
68
15A*
VPWR #4
69
15A*
VPWR #1
70
10A*
A/C relay, All-wheel drive module
71
Not used
72
Not used
73
Not used
74
Not used
75
A/C clutch diode
76
Not used
77
TT park lamps relay
78
20A*
Right HID headlamps
79
5A*
Adaptive cruise control
80
Not used
81
Not used
82
15A*
Rear washer
83
Not used
84
20A*
TT park lamps
85
Not used
86
7.5A*
PCM keep-alive, PCM relay
87
5A*
Run/start relay
88
Run/start relay
89
5A*
Adaptive lighting
90
10A*
PCM
91
10A*
Adaptive cruise control
Roadside Emergencies
264
2012 MKX
(mkx)
Owners Guide, 1st Printing
USA
(fus)
Fuse/Relay
Location
Fuse Amp
Rating
Power Distribution Box
Description
92
10A*
ABS module
93
5A*
Blower motor/rear defroster relay
94
30A**
Passenger compartment fuse
panel run/start
95
Not used
96
Not used
97
Not used
98
A/C clutch relay
* Mini Fuses ** Cartridge Fuses
CHANGING THE TIRES
If you get a flat tire while driving, do not apply the brake heavily.
Instead, gradually decrease your speed. Hold the steering wheel firmly
and slowly move to a safe place on the side of the road.
Note:
The tire pressure monitoring system (TPMS) indicator light will
illuminate when the spare tire is in use. To restore the full functionality
of the monitoring system, all road wheels equipped with tire pressure
monitoring sensors must be mounted on the vehicle.
Have a flat serviced by an authorized dealer in order to prevent damage
to the TPMS sensors, refer to
Tire pressure monitoring system
(TPMS)
in the
Tires, Wheels and Loading
chapter. Replace the spare
tire with a road tire as soon as possible. During repairing or replacing of
the flat tire, have the authorized dealer inspect the TPMS sensor for
damage.
WARNING:
The use of tire sealants may damage your tire
pressure monitoring system (TPMS) and should not be used.
However, if you must use a sealant, the TPMS sensor and valve stem
on the wheel must be replaced by an authorized Ford dealer.
WARNING:
Refer to
Tire pressure monitoring system (TPMS)
in the
Tires, Wheels and Loading
chapter for important
information. If the tire pressure monitor sensor becomes damaged, it
will no longer function.
Roadside Emergencies
265
2012 MKX
(mkx)
Owners Guide, 1st Printing
USA
(fus)