Lincoln MKT - 2018 Fuse Box Diagram

Lincoln MKT - 2018 Fuse Box Diagram

Note:
When the passenger airbag status
indicator off light is illuminated, the
passenger (seat mounted) side airbag may
be disabled to avoid the risk of airbag
deployment injuries.
After all occupants have adjusted their seats
and put on seatbelts, it is very important that
they continue to sit properly. A properly
seated occupant sits upright, leaning against
the seatback, and centered on the seat
cushion, with their feet comfortably extended
on the floor. Sitting improperly can increase
the chance of injury in a crash event. For
example, if an occupant slouches, lies down,
turns sideways, sits forward, leans forward
or sideways, or puts one or both feet up, the
chance of injury during a crash greatly
increases.
E67017
Make sure the front passenger
sensing system is operating
properly. See
Crash Sensors and
Airbag Indicator
(page 57).
Do not attempt to repair or service the
system. Take your vehicle immediately to an
authorized dealer.
If it is necessary to modify an advanced front
airbag system to accommodate a person
with disabilities, contact the Ford Customer
Relationship Center. See
Getting the
Services You Need
(page 259).
SIDE AIRBAGS
WARNINGS
Do not place objects or mount
equipment on or near the airbag cover,
on the side of the seatbacks (of the front
seats), or in front seat areas that may come
into contact with a deploying airbag. Failure
to follow these instructions may increase the
risk of personal injury in the event of a crash.
Do not use accessory seat covers. The
use of accessory seat covers may
prevent the deployment of the side airbags
and increase the risk of injury in an accident.
Do not lean your head on the door. The
side airbag could injure you as it
deploys from the side of the seatback.
WARNINGS
Do not attempt to service, repair, or
modify the airbag, its fuses or the seat
cover on a seat containing an airbag as you
could be seriously injured or killed. Contact
your authorized dealer as soon as possible.
If the side airbag has deployed, the
airbag will not function again. The side
airbag system (including the seat) must be
inspected and serviced by an authorized
dealer. If the airbag is not replaced, the
unrepaired area will increase the risk of injury
in a crash.
The side airbags are located on the outboard
side of the seatbacks of the front seats. In
certain sideways crashes, the airbag on the
side affected by the crash will be inflated.
The airbag was designed to inflate between
the door panel and occupant to further
enhance the protection provided occupants
in side impact crashes.
55
MKT (TP4) , enUSA, Edition date: 201703, First Printing
Supplementary Restraints System
E152533
The system consists of the following:
A label or embossed side panel
indicating that side airbags are fitted to
your vehicle.
Side airbags located inside the driver and
front passenger seatbacks.
Front passenger sensing system.
E67017
Crash sensors and monitoring system
with readiness indicator. See
Crash
Sensors and Airbag Indicator
(page 57).
Note:
The passenger sensing system will
deactivate the passenger seat-mounted side
airbag if it detects an empty passenger seat.
The design and development of the side
airbag system included recommended
testing procedures that were developed by
a group of automotive safety experts known
as the Side Airbag Technical Working Group.
These recommended testing procedures
help reduce the risk of injuries related to the
deployment of side airbags.
SAFETY CANOPY
WARNINGS
Do not place objects or mount
equipment on or near the headliner at
the siderail that may come into contact with
a deploying curtain airbag. Failure to follow
these instructions may increase the risk of
personal injury in the event of a crash.
Do not lean your head on the door. The
curtain airbag could injure you as it
deploys from the headliner.
WARNINGS
Do not attempt to service, repair, or
modify the curtain airbags, its fuses,
the A, B, C or D pillar trim, or the headliner
on a vehicle containing curtain airbags as
you could be seriously injured or killed.
Contact your authorized dealer as soon as
possible.
All occupants of your vehicle including
the driver should always wear their
safety belts even when an airbag
supplemental restraint system and curtain
airbag is provided. Failure to properly wear
your safety belt could seriously increase the
risk of injury or death.
To reduce risk of injury, do not obstruct
or place objects in the deployment
path of the curtain airbag.
If the curtain airbags have deployed,
the curtain airbags will not function
again. The curtain airbags (including the A,
B, C and D pillar trim and headliner) must be
inspected and serviced by an authorized
dealer. If the curtain airbag is not replaced,
the unrepaired area will increase the risk of
injury in a crash.
56
MKT (TP4) , enUSA, Edition date: 201703, First Printing
Supplementary Restraints System
12 Volt DC Power Point
WARNING
Do not plug optional electrical
accessories into the cigar lighter
socket. Incorrect use of the cigar lighter can
cause damage not covered by the vehicle
warranty, and can result in fire or serious
injury.
Note:
When you switch the ignition on, you
can use the socket to power 12 volt
appliances with a maximum current rating
of 15 amps.
If the power supply does not work after you
switch the ignition off, switch the ignition on.
Note:
Do not hang any accessory from the
accessory plug.
Note:
Do not use the power point over the
vehicle capacity of 12 volt DC 180 watts or
a fuse may blow.
Note:
Always keep the power point caps
closed when not in use.
Do not insert objects other than an accessory
plug into the power point.
This damages the
power point and may blow the fuse.
Run the vehicle for full capacity use of the
power point.
To prevent the battery from running out of
charge:
Do not use the power point longer than
necessary when the vehicle is not
running.
Do not leave devices plugged in
overnight or when you park your vehicle
for extended periods.
Locations
Power points may be in the following
locations:
Near the floor inside the front console
bin.
Inside the center console.
On the rear of the center console.
Inside the luggage compartment.
110 Volt AC Power Point
(If Equipped)
WARNING
Do not keep electrical devices plugged
in the power point whenever the
device is not in use. Do not use any
extension cord with the 110 volt AC power
point, since it will defeat the safety protection
design. Doing so may cause the power point
to overload due to powering multiple devices
that can reach beyond the 150 watt load limit
and could result in fire or serious injury.
Note:
The power point turns off when you
switch the ignition off, or when the battery
voltage drops below 11 volts.
You can use the power point for electric
devices that require up to 150 watts.
It is on
the rear of the center console.
158
MKT (TP4) , enUSA, Edition date: 201703, First Printing
Auxiliary Power Points
If you cannot move the gearshift lever out of
park (P) position with the ignition in the on
position and the brake pedal pressed, a
malfunction may have occurred. It is possible
that a fuse has blown or your vehicle
s brake
lamps are not operating properly.
See
Fuse
Specification Chart
(page 267).
If the fuse is not blown and the brake lamps
are working properly, the following
procedure will allow you to move the
gearshift lever from park (P):
1.
Apply the parking brake, turn the ignition
off and remove the key.
E224615
2.
Remove the access plug on the side of
the center console.
3.
Apply the brake pedal. Using a suitable
tool (for example, a screwdriver), push
the brake-shift interlock override lever
forward while pulling the gearshift lever
out of park (P) and into neutral (N).
4.
Install the access plug on side of the
center console.
5.
Apply the brake pedal, start the vehicle,
and release the parking brake.
Automatic Transmission Adaptive
Learning
This feature may increase durability and
provide consistent shift feel over the life of
your vehicle. A new vehicle or transmission
may have firm shifts, soft shifts or both. This
operation is considered normal and does not
affect function or durability of the
transmission. Over time, the adaptive
learning process fully updates transmission
operation.
If Your Vehicle Gets Stuck In Mud or
Snow
Note:
Do not rock the vehicle if the engine
is not at normal operating temperature or
damage to the transmission may occur.
Note:
Do not rock the vehicle for more than
a minute or damage to the transmission and
tires may occur, or the engine may overheat.
If your vehicle gets stuck in mud or snow,
you may rock it out by shifting between
forward and reverse gears, stopping
between shifts in a steady pattern. Press
lightly on the accelerator in each gear.
182
MKT (TP4) , enUSA, Edition date: 201703, First Printing
Transmission
TOWING A TRAILER
WARNINGS
Do not exceed the GVWR or the
GAWR specified on the certification
label.
Towing trailers beyond the
maximum recommended gross
trailer weight exceeds the limit of your
vehicle and could result in engine
damage, transmission damage,
structural damage, loss of vehicle
control, vehicle rollover and personal
injury.
Note:
Your vehicle may have electrical
items, such as fuses or relays, related
to towing. See
Fuses
(page 267).
Your vehicle's load capacity designation
is by weight, not by volume, so you
cannot necessarily use all available
space when loading a vehicle or trailer.
Towing a trailer places an extra load on
your vehicle's engine, transmission, axle,
brakes, tires and suspension. Inspect
these components periodically during,
and after, any towing operation.
Load Placement
To help minimize how trailer movement
affects your vehicle when driving:
Load the heaviest items closest to
the trailer floor.
Load the heaviest items centered
between the left and right side trailer
tires.
Load the heaviest items above the
trailer axles or just slightly forward
toward the trailer tongue. Do not
allow the final trailer tongue weight
to go above or below 10-15% of the
loaded trailer weight.
Select a ball mount with the correct
rise or drop. When both the loaded
vehicle and trailer are connected, the
trailer frame should be level, or
slightly angled down toward your
vehicle, when viewed from the side.
When driving with a trailer or payload, a
slight takeoff vibration or shudder may
be present due to the increased payload
weight. Additional information regarding
proper trailer loading and setting your
vehicle up for towing is located in the
Load Carrying chapter. See
Load Limit
(page 236).
You can also find information in the
RV
& Trailer Towing Guide
available at your
authorized dealer, or online.
241
MKT (TP4) , enUSA, Edition date: 201703, First Printing
Towing
Park the booster vehicle close to the hood
of the disabled vehicle, making sure the two
vehicles do not touch.
Connecting the Jumper Cables
WARNINGS
Do not attach the cables to fuel lines,
engine rocker covers, the intake
manifold or electrical components as
grounding points. Stay clear of moving parts.
To avoid reverse polarity connections, make
sure that you correctly identify the positive
(+) and negative (-) terminals on both the
disabled and booster vehicles before
connecting the cables.
Do not attach the end of the positive
cable to the studs or L-shaped eyelet
located above the positive (+) terminal of
your vehicle
s battery. High current may flow
through and cause damage to the fuses.
Do not connect the end of the second
cable to the negative (-) terminal of the
battery to be jumped. A spark may cause an
explosion of the gases that surround the
battery.
Note:
In the illustration, the bottom vehicle
represents the booster vehicle.
4
2
1
3
E142664
1.
Connect the positive (+) jumper cable to
the positive (+) terminal of the discharged
battery.
2.
Connect the other end of the positive (+)
cable to the positive (+) terminal of the
booster vehicle battery.
3.
Connect the negative (-) cable to the
negative (-) terminal of the booster
vehicle battery.
4.
Make the final connection of the negative
(-) cable to an exposed metal part of the
stalled vehicle's engine, away from the
battery and the fuel injection system, or
connect the negative (-) cable to a ground
connection point if available.
Jump Starting
1.
Start the engine of the booster vehicle
and rev the engine moderately, or press
the accelerator gently to keep your
engine speed between 2000 and 3000
RPM, as shown in your tachometer.
2.
Start the engine of the disabled vehicle.
256
MKT (TP4) , enUSA, Edition date: 201703, First Printing
Roadside Emergencies
FUSE SPECIFICATION CHART
Power Distribution Box
WARNINGS
Always disconnect the battery before
servicing high current fuses.
WARNINGS
To reduce risk of electrical shock,
always replace the cover to the power
distribution box before reconnecting the
battery or refilling fluid reservoirs.
The power distribution box is in the engine
compartment. It has high-current fuses that
protect the vehicle's main electrical systems
from overloads.
If you disconnect and reconnect the battery,
you will need to reset some features. See
Changing the 12V Battery
(page 301).
E173618
97
98
77
96
95
94
93 92 91 90 89
88
66
44
78
56
39
26
18
16
17
3
1
2
4
5
6
7
8
9
19
20
21
22
23
24
27
28
29
30
31
40
41
42
43
55
57
58
59
60
61
62
63
64
65
79
80
81
82
83
84
85
86
87
67
45
32
10
11
12
13
33
34
35
46
47
48
49
50
51
68
69
70
71
72
74
73
76
75
53
37
36
54
38
25
15
14
52
267
MKT (TP4) , enUSA, Edition date: 201703, First Printing
Fuses
Protected Components
Fuse Rating
Fuse or Relay Number
Fan relay 2.
40A
1
1
Fan relay 1.
40A
1
2
Trailer brake control module.
30A
1
3
Wipers.
30A
1
4
Washer pump.
Anti-lock brake system pump.
50A
1
5
B+ #1 access circuit (limousine/livery).
50A
1
6
Power liftgate.
30A
1
7
Moonroof.
20A
1
8
Power sunshade.
Second row console power point.
20A
1
9
Third row power seats relay.
Relay
10
Heated rear window relay.
Relay
11
Trailer tow battery charge relay.
Relay
12
268
MKT (TP4) , enUSA, Edition date: 201703, First Printing
Fuses
Protected Components
Fuse Rating
Fuse or Relay Number
Starter motor relay.
Relay
13
Cooling fan number 2 relay.
Relay
14
Fuel pump relay.
Relay
15
B+ #2 access circuit (limousine/livery).
40A
1
16
110V AC power point.
30A
1
17
Front blower motor relay.
40A
1
18
Starter relay.
30A
1
19
Storage bin power point.
20A
1
20
Instrument panel power point / cigar lighter.
20A
1
21
Third row seat module.
30A
1
22
Memory module.
30A
1
23
Trailer tow battery charge (non-limousine/livery).
30A
1
24
Vacuum pump relay (limousine only).
40A
1
269
MKT (TP4) , enUSA, Edition date: 201703, First Printing
Fuses
Protected Components
Fuse Rating
Fuse or Relay Number
Not used.
-
25
Rear window defroster.
40A
1
26
Heated mirrors.
Cargo power point.
20A
1
27
Front climate controlled seats.
30A
1
28
Rear climate controlled seats.
30A
1
29
Rear heated seats.
20A
1
30
Electric fan relay 3.
25A
1
31
Auxiliary blower motor relay.
Relay
32
Cooling fan #1 relay.
Relay
33
Front blower motor relay.
Relay
34
Cooling fan (series) relay.
Relay
35
Not used.
-
36
Trailer tow right-hand stop/turn lamps relay.
Relay
37
Trailer tow reverse lamps relay.
Relay
38
270
MKT (TP4) , enUSA, Edition date: 201703, First Printing
Fuses
Protected Components
Fuse Rating
Fuse or Relay Number
Auxiliary blower motor.
30A
1
39
Left front smart window motor.
30A
1
40
Left rear smart window motor.
30A
1
41
Passenger power seat.
30A
1
42
Anti-lock brake system valves.
20A
1
43
Windshield washer relay.
Relay
44
Rain sensor.
5A
2
45
Canister vent solenoid (EcoBoost engines).
5A
2
46
Washer pump.
15A
2
47
Front park lamps.
10A
2
48
Not used.
-
49
Heated mirrors.
10A
2
50
271
MKT (TP4) , enUSA, Edition date: 201703, First Printing
Fuses
Protected Components
Fuse Rating
Fuse or Relay Number
Powertrain control module
Injector power monitor
(non-EcoBoost engines).
5A
2
51
Not used.
-
52
Trailer tow left-hand stop/turn lamps relay.
Relay
53
Not used.
-
54
Wiper relay.
Relay
55
Fuel injectors.
30A
2
56
Fuel pump relay.
Left-hand high intensity discharge headlamp.
20A
2
57
Alternator sensor.
10A
2
58
Brake on/off switch.
10A
2
59
Trailer tow back-up lamps.
10A
2
60
B+ #6 access circuit (limousine/livery).
20A
2
61
A/C clutch relay.
10A
2
62
Trailer tow stop/turn lamps.
15A
2
63
272
MKT (TP4) , enUSA, Edition date: 201703, First Printing
Fuses
Protected Components
Fuse Rating
Fuse or Relay Number
Rear wipers.
15A
2
64
B+ #7 access circuit (limousine/livery).
20A
2
65
Powertrain control module
vehicle power relay.
Relay
66
Vehicle power #2
oxygen sensor heater.
20A
2
67
Mass airflow sensor.
Variable camshaft timing solenoid valve.
Canister vent solenoid.
Canister purge solenoid.
Vehicle power #4 (ignition coils).
20A
2
68
Vehicle power 1 (powertrain control module).
20A
2
69
Vehicle power #3 (coil)
A/C clutch relay.
15A
2
70
Fan control relay coils 1-3.
Variable air conditioning compressor.
Auxiliary transmission warmup.
Turbo charge waste-gate control.
Electronic compressor bypass valve.
All-wheel drive module.
Positive crankcase ventilation heater.
Not used.
-
71
273
MKT (TP4) , enUSA, Edition date: 201703, First Printing
Fuses
Protected Components
Fuse Rating
Fuse or Relay Number
Limousine/livery run/accessory.
5A
2
72
Limousine/livery battery saver.
5A
2
73
Not used.
-
74
Not used.
-
75
Not used.
-
76
Trailer tow park lamps relay.
Relay
77
Right high-intensity discharge headlamp.
20A
2
78
Adaptive cruise control module.
10A
2
79
B+ #3 access circuit (limousine/livery).
30A
2
80
B+ #4 access circuit (limousine/livery).
15A
2
81
Rear washer.
15A
2
82
Not used.
-
83
Trailer tow park lamps.
20A
2
84
274
MKT (TP4) , enUSA, Edition date: 201703, First Printing
Fuses
Protected Components
Fuse Rating
Fuse or Relay Number
B+ #5 access circuit (limousine/livery).
15A
2
85
Powertrain control module.
5A
2
86
Keep alive power and relay.
Powertrain control module relay.
Canister vent solenoid (non-EcoBoost engines).
Run start relay.
5A
2
87
Run start relay.
Relay
88
Anti
lock brake system module.
10A
2
89
Adaptive headlamps module.
Powertrain control module run/start.
10A
2
90
Adaptive cruise control module.
10A
2
91
Front blower relay coil.
5A
2
92
Power steering module.
Auxiliary blower motor.
5A
2
93
Rear window defroster relay.
Battery charge / vacuum pump relays.
Body control module run/start.
30A
2
94
275
MKT (TP4) , enUSA, Edition date: 201703, First Printing
Fuses
Protected Components
Fuse Rating
Fuse or Relay Number
Not used.
-
95
Not used.
-
96
Not used.
-
97
A/C clutch relay.
Relay
98
1
J Case Low Profile fuse.
2
Mini fuse.
Passenger Compartment Fuse Panel
The fuse panel is under the instrument panel
to the left of the steering wheel. You may
need to remove a trim panel to access it.
276
MKT (TP4) , enUSA, Edition date: 201703, First Printing
Fuses
E163102
277
MKT (TP4) , enUSA, Edition date: 201703, First Printing
Fuses
Protected Components
Fuse Rating
Fuse or Relay Number
Passenger side rear window.
30A
1
Memory seat.
15A
2
Second row seats.
Passenger side front window.
30A
3
Demand lamps battery saver relay.
10A
4
Limousine battery saver.
Audio amplifier
20A
5
Active noise control module.
Rear climate control.
5A
6
Rear seat entertainment module (livery only).
USB power outlet.
Driver seat module logic.
7.5A
7
Left front door zone module.
Keypad.
Power liftgate.
10A
8
SYNC module.
10A
9
Electronic finish panel.
Radio frequency transceiver module.
Run accessory relay.
10A
10
278
MKT (TP4) , enUSA, Edition date: 201703, First Printing
Fuses
Protected Components
Fuse Rating
Fuse or Relay Number
Front wiper motor relay.
Limousine run/accessory.
Intelligent access module logic.
10A
11
Heads-up display.
Puddle lamp.
15A
12
Backlighting LED.
Interior lighting.
Right-hand direction indicators.
15A
13
Left-hand direction indicators.
15A
14
Center high mounted stop lamp.
15A
15
Backup lamp.
Right low beam headlamp.
10A
16
Left low beam headlamp.
10A
17
Third row power seats.
10A
18
Start button.
Keypad illumination.
Brake-shift interlock.
Powertrain control module wake-up.
Smart amplifier.
20A
19
Subwoofer amplifier.
279
MKT (TP4) , enUSA, Edition date: 201703, First Printing
Fuses
Protected Components
Fuse Rating
Fuse or Relay Number
Not used (spare).
20A
20
Extended power module.
10A
21
Horn relay.
20A
22
Steering wheel control module logic.
15A
23
Instrument cluster.
Steering wheel control module.
15A
24
Datalink.
Not used (spare).
15A
25
Push button ignition switch.
5A
26
Intelligent access module power.
20A
27
Not used (spare).
15A
28
Radio.
20A
29
Front park lamps.
15A
30
Trailer tow relay for park lamps.
Front side markers.
Trailer tow brake controller.
5A
31
Smart window motors.
15A
32
Master window and mirror switch.
280
MKT (TP4) , enUSA, Edition date: 201703, First Printing
Fuses
Protected Components
Fuse Rating
Fuse or Relay Number
Lock switch illumination.
Moonroof.
110V AC power point.
Rear seat switch (livery).
Suspension module.
10A
33
Reverse park aid module.
10A
34
Automatic high beam and lane departure module.
Rear heated seat module.
Blind spot monitor module.
Rear video camera.
Interior mirror.
Climate control humidity sensor.
5A
35
Overdrive cancel switch (limousine/livery).
Heads-up display.
Heated steering wheel.
10A
36
Refrigerator.
10A
37
Not used (spare).
10A
38
High beams.
15A
39
Rear park lamps.
10A
40
License plate lamps.
281
MKT (TP4) , enUSA, Edition date: 201703, First Printing
Fuses
Protected Components
Fuse Rating
Fuse or Relay Number
Rear light bar applique.
Extended power module.
7.5A
41
Not used (spare).
5A
42
Not used (spare).
10A
43
Not used (spare).
10A
44
Not used (spare).
5A
45
Climate control module.
10A
46
Fog lamp relay.
15A
47
Not used (spare).
30A Circuit breaker
48
Delayed accessory relay.
Relay
49
Body control module.
282
MKT (TP4) , enUSA, Edition date: 201703, First Printing
Fuses
CHANGING A FUSE
Fuses
WARNING
Always replace a fuse with one that
has the specified amperage rating.
Using a fuse with a higher amperage rating
can cause severe wire damage and could
start a fire.
E217331
If electrical components in the vehicle are
not working, a fuse may have blown. Blown
fuses are identified by a broken wire within
the fuse. Check the appropriate fuses before
replacing any electrical components.
283
MKT (TP4) , enUSA, Edition date: 201703, First Printing
Fuses
Fuse Types
E207206
Fuse Type
Callout
Micro 2
A
Micro 3
B
Maxi
C
284
MKT (TP4) , enUSA, Edition date: 201703, First Printing
Fuses
Fuse Type
Callout
Mini
D
M Case
E
J Case
F
J Case Low Profile
G
285
MKT (TP4) , enUSA, Edition date: 201703, First Printing
Fuses
Engine coolant reservoir. See
Engine Coolant Check
(page 293).
A.
Engine oil filler cap. See
Engine Oil Check
(page 291).
B.
Engine oil dipstick. See
Engine Oil Dipstick
(page 291).
C.
Brake fluid reservoir. See
Brake Fluid Check
(page 300).
D.
Battery. See
Changing the 12V Battery
(page 301).
E.
Engine compartment fuse box. See
Fuses
(page 267).
F.
Air filter assembly. See
Changing the Engine Air Filter
(page 309).
G.
Automatic transmission dipstick. See
Automatic Transmission Fluid Check
(page 298).
H.
Washer fluid reservoir. See
Washer Fluid Check
(page 300).
I.
289
MKT (TP4) , enUSA, Edition date: 201703, First Printing
Maintenance
Brake fluid reservoir. See
Brake Fluid Check
(page 300).
D.
Battery. See
Changing the 12V Battery
(page 301).
E.
Engine compartment fuse box. See
Fuses
(page 267).
F.
Air filter assembly. See
Changing the Engine Air Filter
(page 309).
G.
Automatic transmission dipstick. See
Automatic Transmission Fluid Check
(page 298).
H.
Washer fluid reservoir. See
Washer Fluid Check
(page 300).
I.
ENGINE OIL DIPSTICK
E146429
MIN
A
MAX
B
ENGINE OIL CHECK
To check the engine oil level consistently
and accurately, do the following:
1.
Make sure the parking brake is on. Make
sure the transmission is in park (P) or
neutral (N).
2.
Run the engine until it reaches normal
operating temperature.
3.
Make sure that your vehicle is on level
ground.
4.
Switch the engine off and wait 15 minutes
for the oil to drain into the oil pan.
Checking the engine oil level too soon
after you switch the engine off may result
in an inaccurate reading.
5.
Open the hood.
See
Opening and
Closing the Hood
(page 287).
6.
Remove the dipstick and wipe it with a
clean, lint-free cloth.
See
Under Hood
Overview
(page 290).
7.
Replace the dipstick and remove it again
to check the oil level.
See
Under Hood
Overview
(page 290).
291
MKT (TP4) , enUSA, Edition date: 201703, First Printing
Maintenance