Lincoln MKC - 2017 Fuse Box Diagram

Lincoln MKC - 2017 Fuse Box Diagram

PRINCIPLE OF OPERATION
WARNINGS
Airbags do not inflate slowly or gently,
and the risk of injury from a deploying
airbag is the greatest close to the trim
covering the airbag module.
All occupants of your vehicle, including
the driver, should always properly wear
their safety belts, even when an airbag
supplemental restraint system is provided.
Failure to properly wear your safety belt
could seriously increase the risk of injury or
death.
Always transport children 12 years old
and under in the back seat and always
properly use appropriate child restraints.
Failure to follow this could seriously increase
the risk of injury or death.
Never place your arm over the airbag
module as a deploying airbag can
result in serious arm fractures or other
injuries.
WARNINGS
Airbags can kill or injure a child in a
child seat. Never place a rear-facing
child seat in front of an active airbag. If you
must use a forward-facing child seat in the
front seat, move the seat upon which the
child seat is installed all the way back.
Do not attempt to service, repair, or
modify the airbag supplemental
restraint systems or its fuses as you could
be seriously injured or killed. Contact your
authorized dealer as soon as possible.
Several airbag system components get
hot after inflation. Do not touch them
after inflation as this may result in serious
injury.
If the airbag has deployed, the airbag
will not function again and must be
replaced immediately. If the airbag is not
replaced, the unrepaired area will increase
the risk of injury in a crash.
The airbags are a supplemental restraint
system and are designed to work with the
safety belts to help protect the driver and
right front passenger from certain upper
body injuries. Airbags do not inflate slowly;
there is a risk of injury from a deploying
airbag.
Note:
You will hear a loud bang and see a
cloud of harmless powdery residue if an
airbag deploys. This is normal.
The airbags inflate and deflate rapidly upon
activation. After airbag deployment, it is
normal to notice a smoke-like, powdery
residue or smell the burnt propellant. This
may consist of cornstarch, talcum powder (to
lubricate the bag) or sodium compounds (for
example, baking soda) that result from the
combustion process that inflates the airbag.
Small amounts of sodium hydroxide may be
present which may irritate the skin and eyes,
but none of the residue is toxic.
41
MKC (TME) Canada/United States of America, enUSA, Edition date: 01/2016, First Printing
Supplementary Restraints System
If it is necessary to modify an advanced front
airbag system to accommodate a person
with disabilities, contact the Ford Customer
Relationship Center. See
Getting the
Services You Need
(page 259).
SIDE AIRBAGS
WARNINGS
Do not place objects or mount
equipment on or near the airbag cover,
on the side of the seatbacks (of the front
seats), or in front seat areas that may come
into contact with a deploying airbag. Failure
to follow these instructions may increase the
risk of personal injury in the event of a crash.
Do not use accessory seat covers. The
use of accessory seat covers may
prevent the deployment of the side airbags
and increase the risk of injury in an accident.
Do not lean your head on the door. The
side airbag could injure you as it
deploys from the side of the seatback.
WARNINGS
Do not attempt to service, repair, or
modify the airbag, its fuses or the seat
cover on a seat containing an airbag as you
could be seriously injured or killed. Contact
your authorized dealer as soon as possible.
If the side airbag has deployed, the
airbag will not function again. The side
airbag system (including the seat) must be
inspected and serviced by an authorized
dealer. If the airbag is not replaced, the
unrepaired area will increase the risk of injury
in a crash.
The side airbags are located on the outboard
side of the seatbacks of the front seats. In
certain sideways crashes, the airbag on the
side affected by the crash will be inflated.
The airbag was designed to inflate between
the door panel and occupant to further
enhance the protection provided occupants
in side impact crashes.
E152533
The system consists of the following:
A label or embossed side panel
indicating that side airbags are fitted to
your vehicle.
Side airbags located inside the driver and
front passenger seatbacks.
Front passenger sensing system.
Crash sensors and monitoring system
with readiness indicator. See
Crash
Sensors and Airbag Indicator
(page 49).
47
MKC (TME) Canada/United States of America, enUSA, Edition date: 01/2016, First Printing
Supplementary Restraints System
Note:
The passenger sensing system will
deactivate the passenger seat-mounted side
airbag if it detects an empty passenger seat.
The design and development of the side
airbag system included recommended
testing procedures that were developed by
a group of automotive safety experts known
as the Side Airbag Technical Working Group.
These recommended testing procedures
help reduce the risk of injuries related to the
deployment of side airbags.
DRIVER KNEE AIRBAG
A driver's knee airbag is located under the
instrument panel. During a crash, the
restraints control module may activate the
driver's knee airbag based on crash severity
and occupant conditions. Under certain crash
and occupant conditions, the driver
s knee
airbag may deploy but the driver
s front
airbag may not activate. As with front and
side airbags, it is important to be properly
seated and restrained to reduce the risk of
death or serious injury.
Make sure the knee airbag is
operating properly. See
Crash
Sensors and Airbag Indicator
(page 49).
SAFETY CANOPY
WARNINGS
Do not place objects or mount
equipment on or near the headliner at
the siderail that may come into contact with
a deploying curtain airbag. Failure to follow
these instructions may increase the risk of
personal injury in the event of a crash.
Do not lean your head on the door. The
curtain airbag could injure you as it
deploys from the headliner.
Do not attempt to service, repair, or
modify the curtain airbags, its fuses,
the A, B, or C pillar trim, or the headliner on
a vehicle containing curtain airbags as you
could be seriously injured or killed. Contact
your authorized dealer as soon as possible.
WARNINGS
All occupants of your vehicle including
the driver should always wear their
safety belts even when an airbag
supplemental restraint system and curtain
airbag is provided. Failure to properly wear
your safety belt could seriously increase the
risk of injury or death.
To reduce risk of injury, do not obstruct
or place objects in the deployment
path of the curtain airbag.
If the curtain airbags have deployed,
the curtain airbags will not function
again. The curtain airbags (including the A,
B and C pillar trim and headliner) must be
inspected and serviced by an authorized
dealer. If the curtain airbag is not replaced,
the unrepaired area will increase the risk of
injury in a crash.
The Safety Canopy will deploy during
significant side crashes or when a certain
likelihood of a rollover event is detected by
the rollover sensor. The Safety Canopy is
mounted to the roof side-rail sheet metal,
behind the headliner, above each row of
48
MKC (TME) Canada/United States of America, enUSA, Edition date: 01/2016, First Printing
Supplementary Restraints System
12 Volt DC Power Point
WARNINGS
Do not plug optional electrical
accessories into the cigar lighter
socket. Incorrect use of the cigar lighter can
cause damage not covered by the vehicle
warranty, and can result in fire or serious
injury.
Do not use a power point for operating
a cigar lighter. Incorrect use of the
power points can cause damage not covered
by the vehicle warranty, and can result in fire
or serious injury.
Note:
When you switch the ignition on, you
can use the socket to power 12 volt
appliances with a maximum current rating
of 15 amps.
If the power supply does not work after you
switch the ignition off, switch the ignition on.
Note:
Do not hang any accessory from the
accessory plug.
Note:
Do not use the power point over the
vehicle capacity of 12 volt DC 180 watts or
a fuse may blow.
Note:
Always keep the power point caps
closed when not in use.
Do not insert objects other than an accessory
plug into the power point.
This will damage
the power point and blow the fuse.
Run the vehicle for full capacity use of the
power point.
To prevent the battery from running out of
charge:
Do not use the power point longer than
necessary when the vehicle is not
running.
Do not leave devices plugged in
overnight or when you park your vehicle
for extended periods.
Locations
Power points may be in the following
locations:
On the front of the center console.
Inside the center console.
On the rear of the center console.
Inside the luggage compartment.
110 Volt AC Power Point
(If Equipped)
WARNING
Do not keep electrical devices plugged
in the power point whenever the
device is not in use. Do not use any
extension cord with the 110 volt AC power
point, since it will defeat the safety protection
design. Doing so may cause the power point
to overload due to powering multiple devices
that can reach beyond the 150 watt load limit
and could result in fire or serious injury.
Note:
The power point will turn off when the
ignition is switched off or the battery voltage
drops below 11 volts.
Use the power point for powering electric
devices that require up to 150 watts.
It is on
the rear of the center console.
153
MKC (TME) Canada/United States of America, enUSA, Edition date: 01/2016, First Printing
Auxiliary Power Points
TOWING A TRAILER
WARNINGS
Do not exceed the GVWR or the
GAWR specified on the certification
label.
Towing trailers beyond the
maximum recommended gross
trailer weight exceeds the limit of the
vehicle and could result in engine
damage, transmission damage,
structural damage, loss of vehicle
control, vehicle rollover and personal
injury.
Your vehicle may have electrical items,
such as fuses or relays, related to
towing. See
Fuses
(page 267).
Your vehicle's load capacity designation
is by weight, not by volume, so you
cannot necessarily use all available
space when loading a vehicle or trailer.
Towing a trailer places an extra load on
your vehicle's engine, transmission, axle,
brakes, tires and suspension. Inspect
these components periodically during,
and after, any towing operation.
Load Placement
To help minimize how trailer movement
affects your vehicle when driving:
Load the heaviest items closest to
the trailer floor.
Load the heaviest items centered
between the left and right side trailer
tires.
Load the heaviest items above the
trailer axles or just slightly forward
toward the trailer tongue. Do not
allow the final trailer tongue weight
to go above or below 10-15% of the
loaded trailer weight.
Select a ball mount with the correct
rise or drop. When both the loaded
vehicle and trailer are connected, the
trailer frame should be level, or
slightly angled down toward your
vehicle, when viewed from the side.
When driving with a trailer or payload, a
slight takeoff vibration or shudder may
be present due to the increased payload
weight. Additional information regarding
proper trailer loading and setting your
vehicle up for towing is located in
another chapter of this manual. See
Load Limit
(page 236).
You can also find information in the
RV
& Trailer Towing Guide
available at your
authorized dealer, or online.
241
MKC (TME) Canada/United States of America, enUSA, Edition date: 01/2016, First Printing
Towing
FUSE SPECIFICATION CHART
Pre-Fuse Box
The pre-fuse box is in the engine
compartment attached to the positive battery
post. This box contains several high current
fuses. If you need to replace one of these
high current fuses, see an authorized dealer.
Power Distribution Box
WARNINGS
Always disconnect the battery before
servicing high current fuses.
To reduce risk of electrical shock,
always replace the cover to the power
distribution box before reconnecting the
battery or refilling fluid reservoirs.
The power distribution box is in the engine
compartment. It has high-current fuses that
protect your vehicle's main electrical systems
from overloads.
You will need to reset some features if you
disconnect and reconnect the battery. See
Changing the 12V Battery
(page 296).
Lift the release lever at the rear of the cover
to remove it.
267
MKC (TME) Canada/United States of America, enUSA, Edition date: 01/2016, First Printing
Fuses
E157389
268
MKC (TME) Canada/United States of America, enUSA, Edition date: 01/2016, First Printing
Fuses
Protected components
Fuse amp rating
Fuse
Anti-lock brake system module.
50A
2
F7
Anti-lock brake system module.
30A
2
F8
Fuel pump relay.
20A
2
F9
Blower motor relay.
40A
2
F10
Run start relay.
30A
2
F11
Powertrain control module relay.
40A
2
F12
Starter relay.
30A
2
F13
Memory seat.
30A
2
F14
Wipers and washers relay.
30A
2
F15
Cooling fan.
25A
2
F16
Cooling fan 1 (600W).
40A
2
F17
269
MKC (TME) Canada/United States of America, enUSA, Edition date: 01/2016, First Printing
Fuses
Protected components
Fuse amp rating
Fuse
Cooling fan 1 (750W).
50A
2
Cooling fan 2 (600W).
40A
2
F18
Cooling fan 2 (750W).
50A
2
Anti-lock brake system module run/start.
5A
1
F19
Horn relay.
20A
1
F20
Brake pedal switch.
10A
1
F21
Windshield wipers and washer.
25A
1
F22
Run/start relay coil.
5A
1
F23
Transmission range control module.
20A
1
F24
Air conditioning clutch relay.
10A
1
F25
Powertrain control module relay coil.
5A
1
F26
Washer pump relay.
10A
1
F27
270
MKC (TME) Canada/United States of America, enUSA, Edition date: 01/2016, First Printing
Fuses
Protected components
Fuse amp rating
Fuse
Alternator sensor.
10A
1
F28
Rain sensor.
15A
1
F29
Rear wiper.
Washer pump relay coil.
Left-hand headlamp.
20A
1
F30
Right-hand headlamp.
20A
1
F31
Vehicle power 1 (powertrain control module).
15A
1
F32
Vehicle power 2 (canister vent solenoid, universal exhausted
gas oxygen sensor, variable camshaft timing, catalyst monitor
sensor, canister purge solenoid).
15A
1
F33
Vehicle power 3 (A/C clutch control relay coil, variable A/C
compressor, fan control relay coil, engine charge air bypass
valve solenoid, active grill shutters).
15A
1
F34
Vehicle power 4 (ignition coils).
15A
1
F35
Not used.
F36
Not used.
F37
271
MKC (TME) Canada/United States of America, enUSA, Edition date: 01/2016, First Printing
Fuses
Protected components
Fuse amp rating
Fuse
Voltage quality module run/start (vehicles equipped with
stop/start).
15A
1
F38
Powertrain control ignition start power - run.
5A
1
F39
Electronic power assist steering run/start.
10A
1
F40
Extended power module run/start.
10A
1
F41
Adaptive cruise control.
10A
1
F42
Blind spot information system.
Heads-up display.
Rear video camera.
(vehicles not equipped with stop/start)
Not used.
F43
Heated rear window relay coil.
5A
1
F44
Heated wiper park.
Electronic transmission pump run/stop feed (vehicles
equipped with stop/start).
Transmission range control module run/start.
5A
1
F45
Heated rear window relay.
40A
2
F46
Heated wiper park.
272
MKC (TME) Canada/United States of America, enUSA, Edition date: 01/2016, First Printing
Fuses
Protected components
Fuse amp rating
Fuse
Electronic transmission pump B+ feed (vehicles equipped
with stop/start).
30A
1
F47
Not used.
F48
1
Mini fuse.
2
J-case fuse.
Circuits switched
Relay
Run start.
R1
Horn.
R2
Fuel pump.
R3
Rear window washer pump.
R4
Cooling fan relay 3 (750W).
R5
Windshield wipers.
R6
Cooling fan relay 1 (600W).
R7
Cooling fan relay 5 (750W).
Starter.
R8
Not used.
R9
273
MKC (TME) Canada/United States of America, enUSA, Edition date: 01/2016, First Printing
Fuses
Circuits switched
Relay
Cooling fan relay 4 (750W).
R10
Air conditioning clutch.
R11
Cooling fan relay 1 (750W).
R12
Cooling fan relay 3 (600W).
Cooling fan relay 2.
R13
Powertrain control module.
R14
Heated rear window.
R15
Heated wiper park.
Blower motor.
R16
Passenger Compartment Fuse Box
The fuse panel is behind the lower end of
the glove box.
274
MKC (TME) Canada/United States of America, enUSA, Edition date: 01/2016, First Printing
Fuses
E145984
Protected components
Fuse amp rating
Fuse
Lighting (ambient, glove box, vanity, dome, cargo).
10A
1
1
Memory seats.
7.5A
1
2
Driver door unlock.
20A
1
3
275
MKC (TME) Canada/United States of America, enUSA, Edition date: 01/2016, First Printing
Fuses
Protected components
Fuse amp rating
Fuse
Not used (spare).
5A
1
4
Subwoofer amplifier.
20A
1
5
THX amplifier.
Not used (spare).
10A
2
6
Not used (spare).
10A
2
7
Not used (spare).
10A
2
8
Not used (spare).
10A
2
9
Keypad.
5A
2
10
Power liftgate logic.
Not used (spare).
5A
2
11
Climate control.
7.5A
2
12
Gear shift control.
Push-button ignition.
Cluster.
7.5A
2
13
Datalink module logic.
Steering column module logic.
276
MKC (TME) Canada/United States of America, enUSA, Edition date: 01/2016, First Printing
Fuses
Protected components
Fuse amp rating
Fuse
Not used (spare).
10A
2
14
Datalink module.
10A
2
15
Not used (spare).
15A
1
16
Cellphone passport module.
5A
2
17
Not used (spare).
5A
2
18
Not used (spare).
7.5A
2
19
Not used (spare).
7.5A
2
20
Humidity and in-car temperature.
5A
2
21
Occupant classification system.
5A
2
22
Delayed accessory (driver window switch, moonroof logic,
power inverter logic).
10A
1
23
Central lock and unlock.
20A
1
24
277
MKC (TME) Canada/United States of America, enUSA, Edition date: 01/2016, First Printing
Fuses
Protected components
Fuse amp rating
Fuse
Driver door (window, mirror).
30A
1
25
Front passenger door (window, mirror).
30A
1
26
Moonroof.
30A
1
27
THX amplifier.
20A
1
28
Rear driver side door (window).
30A
1
29
Rear passenger side door (window).
30A
1
30
Not used (spare).
15A
1
31
Display.
10A
1
32
GPS.
Radio frequency receiver.
Voice control.
Radio and active noise control.
20A
1
33
Run/start bus (fuse #19, 20, 21, 22, 35, 36, 37, circuit breaker).
30A
1
34
278
MKC (TME) Canada/United States of America, enUSA, Edition date: 01/2016, First Printing
Fuses
Protected components
Fuse amp rating
Fuse
Restraints control module.
5A
1
35
Auto-dimming rear view mirror.
15A
1
36
Continuous control damping suspension.
Lane keeping system module.
Rear heated seats module.
All-wheel drive relay.
20A
1
37
Heated steering wheel.
Not used (spare).
30A
38
1
Micro fuse.
2
Dual micro fuse.
Rear Cargo Fuse Box
The fuse panel is located in the cargo area
on the passenger side. Open the fuse panel
cover to gain access to the fuses.
279
MKC (TME) Canada/United States of America, enUSA, Edition date: 01/2016, First Printing
Fuses
E228853
280
MKC (TME) Canada/United States of America, enUSA, Edition date: 01/2016, First Printing
Fuses
Protected components
Fuse amp rating
Fuse
Not used.
F1
Not used.
F2
Hands-free liftgate module.
5A
1
F3
Not used.
F4
Not used.
F5
Not used.
F6
Rear heated seats.
30A
2
F7
Power cinch latch.
30A
2
F8
Power liftgate.
Heated front seats.
20A
2
F9
Trailer tow.
40A
2
F10
Climate control seats.
30A
2
F11
Auxiliary power point - instrument panel.
20A
2
F12
Not used.
F13
281
MKC (TME) Canada/United States of America, enUSA, Edition date: 01/2016, First Printing
Fuses
Protected components
Fuse amp rating
Fuse
Power seats.
30A
2
F14
Auxiliary power point - inside of floor console.
20A
2
F15
Auxiliary power point - rear of floor console.
20A
2
F16
Not used.
F17
Auxiliary power point - cargo area.
20A
2
F18
Inverter power outlet.
40A
2
F19
1
Mini fuse.
2
J-case fuse.
Circuits switched
Relay
Not used.
R1
282
MKC (TME) Canada/United States of America, enUSA, Edition date: 01/2016, First Printing
Fuses
CHANGING A FUSE
Fuses
WARNING
Always replace a fuse with one that
has the specified amperage rating.
Using a fuse with a higher amperage rating
can cause severe wire damage and could
start a fire.
E217331
If electrical components in the vehicle are
not working, a fuse may have blown. Blown
fuses are identified by a broken wire within
the fuse. Check the appropriate fuses before
replacing any electrical components.
283
MKC (TME) Canada/United States of America, enUSA, Edition date: 01/2016, First Printing
Fuses
Fuse Types
E207206
Fuse Type
Callout
Micro 2
A
Micro 3
B
Maxi
C
284
MKC (TME) Canada/United States of America, enUSA, Edition date: 01/2016, First Printing
Fuses
Fuse Type
Callout
Mini
D
M Case
E
J Case
F
J Case Low Profile
G
285
MKC (TME) Canada/United States of America, enUSA, Edition date: 01/2016, First Printing
Fuses