Lincoln Aviator - 2003 Fuse Box Diagram

Lincoln Aviator - 2003 Fuse Box Diagram

Another auxiliary power point is
located on the right rear quarter
panel. The power point is accessible
from the liftgate.
The maximum current draw of any single power point should not exceed
it’s fuse rating, otherwise this will result in a blown fuse.
Do not use the cigarette/cigar lighter element in any power point.
Keep power point caps closed when not in use.
POWER WINDOWS
When closing the power windows, you should verify they are free
of obstructions and ensure that children and/or pets are not in
the proximity of the window openings.
The power window switches located
on the center console are called
push-pull switches.
A. Drivers side
B. Window lock
C. Front passenger side
D. Left and right rear passenger
Driver Controls
70
Do not attempt to service, repair, or modify the air bag
supplemental restraint systems or its fuses. See your Ford or
Lincoln Mercury dealer.
Modifying or adding equipment to the front end of the vehicle
(including frame, bumper, front end body structure and tow
hooks) may affect the performance of the air bag system, increasing
the risk of injury. Do not modify the front end of the vehicle.
Additional equipment may affect the performance of the air bag
sensors increasing the risk of injury. Please refer to the Body
Builders Layout Book for instructions about the appropriate installation
of additional equipment.
Children and air bags
Children must always be properly
restrained. Accident statistics
suggest that children are safer when
properly restrained in the rear
seating positions than in the front
seating position. Failure to follow
these instructions may increase the
risk of injury in a collision.
Air bags can kill or injure a
child in a child seat.
NEVER
place a rear-facing child
seat in front of an active air bag. If
you must use a forward-facing
child seat in the front seat, move
the seat all the way back.
Seating and Safety Restraints
145
Do not attempt to service, repair, or modify the Safety Canopy
²
system, its fuses, the A, B, or C pillar trim, or the headliner on a
vehicle containing a Safety Canopy
²
. See your Ford or Lincoln
Mercury dealer.
All occupants of the vehicle including the driver should always
wear their safety belts even when an air bag SRS and Safety
Canopy
²
system is provided.
To reduce risk of injury, do not obstruct or place objects in the
deployment path of the inflatable Safety Canopy
²
.
How does the Safety Canopy
±
system work?
The design and development of the
Safety Canopy
²
system included
recommended testing procedures
that were developed by a group of
automotive safety experts known as
the Side Airbag Technical Working
Group. These recommended testing
procedures help reduce the risk of
injuries related to the deployment of
side airbags (including the Safety
Canopy
²
).
The Safety Canopy
²
system
consists of the following:
An inflatable nylon curtain with a
gas generator concealed behind
the headliner and above the doors
(one each side of the vehicle).
A headliner that will flex to open
above the side doors to allow Safety Canopy
²
deployment.
The same warning light, electronic control and diagnostic unit as used
for the front airbags.
Seating and Safety Restraints
148
3. Using the screwdriver (or
equivalent), push the white plastic
override mechanism (located behind
the bracket) toward the roof of the
vehicle as shown in the illustration.
4. Move the gearshift lever back to N (Neutral) (two places from P
[Park]).
5. Start the vehicle and release the parking brake.
If it is necessary to use the above procedure to move the gearshift lever,
it is possible that a fuse has blown or the vehicle’s brakelamps are not
operating properly. Refer to
Fuses and relays
in the
Roadside
emergencies
chapter.
Do not drive your vehicle until you verify that the brakelamps
are working.
Always set the parking brake fully and make sure the gearshift is
latched in P (Park). Turn the ignition to the LOCK position and
remove the key whenever you leave your vehicle.
If the parking brake is fully released, but the brake warning lamp
remains illuminated, the brakes may not be working properly.
See your dealer or a qualified service technician.
Driving
175
The fuel pump shut-off switch is
located in the passenger’s foot well,
by the kick panel.
Use the following procedure to reset the fuel pump shut-off switch.
1. Turn the ignition to the OFF position.
2. Check the fuel system for leaks.
3. If no fuel leak is apparent, reset the fuel pump shut-off switch by
pushing in on the reset button.
4. Turn the ignition to the ON position. Pause for a few seconds and
return the key to the OFF position.
5. Make a further check for leaks in the fuel system.
FUSES AND RELAYS
Fuses
If electrical components in the
vehicle are not working, a fuse may
have blown. Blown fuses are
identified by a broken wire within
the fuse. Check the appropriate
fuses before replacing any electrical
components.
15
Roadside Emergencies
202
Note:
Always replace a fuse with one that has the specified amperage
rating. Using a fuse with a higher amperage rating can cause severe wire
damage and could start a fire.
Standard fuse amperage rating and color
COLOR
Fuse
rating
Mini
fuses
Standard
fuses
Maxi
fuses
Cartridge
maxi
fuses
Fuse link
cartridge
2A
Grey
Grey
3A
Violet
Violet
4A
Pink
Pink
5A
Tan
Tan
7.5A
Brown
Brown
10A
Red
Red
15A
Blue
Blue
20A
Yellow
Yellow
Yellow
Blue
Blue
25A
Natural
Natural
30A
Green
Green
Green
Pink
Pink
40A
Orange
Green
Green
50A
Red
Red
Red
60A
Blue
Yellow
70A
Tan
Brown
80A
Natural
Black
Passenger compartment fuse panel
The fuse panel is located below the
instrument panel on the driver’s
side.
Roadside Emergencies
203
The fuses are coded as follows:
Fuse/Relay
Location
Fuse Amp
Rating
Passenger Compartment Fuse
Panel Description
1
30A
Moonroof, Driver seat switch
2
10A
VAPS module, Memory seat
module, Body security module
3
20A
Radio, Navigation, Telematics
4
5A
Front wiper module
5
15A
Flasher relay (turn/hazards)
6
5A
Power antenna, Radio, Moonroof
motor, Driver window motor,
Navigation
7
15A
Heated mirrors, DEATC module
8
5A
Daytime Running Lamps (DRL)
module
9
10A
Back-up lamps (DTRS)
Roadside Emergencies
204
Fuse/Relay
Location
Fuse Amp
Rating
Passenger Compartment Fuse
Panel Description
10
10A
Heated backlight relay coil,
Climate seat modules, Auxiliary
A/C temperature blend/mode
actuator, A/C clutch relay contact
11
20A
Not used (spare)
12
15A
Restraints module
13
10A
Brake shift interlock
14
5A
Cornering lamps
15
5A
Instrument cluster, Rear wiper
module, Telematics
16
15A
Cigar lighter, OBD II, Liftgate
release relay coil and contacts
17
15A
Delayed accessory relay coil,
Battery saver relay coil and
contacts
18
5A
Not used (spare)
19
15A
Washer pump
20
5A
Shifter, Clock, Power mirror
switch, DVD
21
10A
Brake pressure switch (ABS), IVD
switch, Flasher relay
22
10A
ABS module
23
5A
Sunload/Autolamp sensor
(SecuriLock
²
transceiver LED)
24
20A
Subwoofer, Navigation
25
5A
Puddle lamp relay coil, Trailer tow
battery charge relay coil
26
5A
SecuriLock
²
transceiver
27
5A
Rear park assist, VAPS module,
Telematics
28
5A
Radio, Navigation
29
10A
DTRS, Feed to Fuse 28
Roadside Emergencies
205
Fuse/Relay
Location
Fuse Amp
Rating
Passenger Compartment Fuse
Panel Description
30
5A
Instrument cluster, Compass
module, Auxiliary A/C relay coil
The relays are located on the reverse side of the passenger compartment
fuse panel. To access the relays, you must remove the fuse panel.
Fuse/Relay Location
Description
Relay 1
Flasher relay
Relay 2
Heated backlight relay
Relay 3
Delayed accessory relay
Relay 4
Open
Relay 5
Battery saver relay
Relay 6
Open
Relay 7
Open
Power distribution box
The power distribution box is located in the engine compartment. The
power distribution box contains high-current fuses that protect your
vehicle’s main electrical systems from overloads.
Roadside Emergencies
206
Always disconnect the battery before servicing high current
fuses.
Always replace the cover to the power distribution box before
reconnecting the battery or refilling fluid reservoirs
If the battery has been disconnected and reconnected, refer to the
Battery
section of the
Maintenance and specifications
chapter.
The high-current fuses are coded as follows:
Fuse/Relay
Location
Fuse Amp
Rating
Power Distribution Box
Description
1
60A**
PJB
2
30A**
Door locks (BSM)
3
Not used
4
40A**
Heated backlight/mirrors
5
40A**
Anti-lock Brake System (ABS)
module (pump)
6
60A**
Delayed accessory
7
20A**
DRL
8
20A**
Electric cooling fan
9
20A**
Headlamp switch, Foglamp switch
10
30A**
ABS module (valves)
11
40A**
PTEC relay contacts
Roadside Emergencies
207
Fuse/Relay
Location
Fuse Amp
Rating
Power Distribution Box
Description
12
50A**
Ignition/Starter relay
13
40A**
Trailer tow relays
14
15A*
Brake lamp feed
15
10A*
Keep alive power
(PTEC/cluster/DEATC)
16
20A*
Power point #3
17
20A*
Rear wiper module
18
20A*
4x4 module
19
30A**
Driver window motor
20
30A**
Electric trailer brakes
21
30A**
Memory seat module
22
20A**
High beam relays fuse
23
30A**
Ignition switch
24
20A*
Horn relay
25
20A*
Power point #1
26
20A*
Fuel pump relay contacts
27
20A*
Trailer tow lamps
28
20A*
Power point #2
29
60A**
PJB
30
30A**
Front wiper module
31
30A**
Climate-controlled seats
32
30A**
Passenger seat switch
33
30A**
Auxiliary blower motor
34
20A**
Right HID relay
35
20A**
Left HID relay
36
40A**
Blower motor
37
15A*
A/C clutch relay, TXV,
Transmission, Speed control
38
15A*
HEGO, VMV, Canister vent,
IMCC-LSRC, Heated PCV, EGR
module
39
15A*
Injectors
Roadside Emergencies
208
Fuse/Relay
Location
Fuse Amp
Rating
Power Distribution Box
Description
40
15A*
PTEC, Mass Air Flow (MAF)
Sensor, Fuel pump relay
41
25A*
Coil on plug, PTEC relay
42
10A*
Right low beam (halogen)
43
10A*
Left low beam (halogen)
44
15A*
Fog lamp relay
45
2A*
Brake Pressure Switch
46
20A*
High beam
47
Horn relay
48
Fuel pump relay
49
High beam relay
50
Fog lamp relay
51
DRL relay
52
A/C clutch relay
53
Trailer tow right turn relay
54
Trailer tow left turn relay
55
Blower motor relay
56
Starter motor relay
57
PTEC relay
58
Ignition relay
59
Driver brake applied relay
60
PCM diode
61
A/C clutch diode
62
30A***
Power windows
* Mini Fuses ** Maxi Cartridge Fuses *** Circuit breaker
Roadside Emergencies
209
Auxiliary relay box
The relay box is located on the front
right fender well underneath the
speed control module.
The relays are coded as follows:
Fuse/Relay Location
Description
Relay 64
Right HID relay
Relay 65
Left HID relay
Relay 66
EDF relay
Rear relay box
The relay box is located on the rear passenger side quarter trim panel.
See your dealer or a certified technician for service of this relay box.
Roadside Emergencies
210
The relays are coded as follows:
Fuse/Relay Location
Description
Relay 1
Liftgate release solenoid
Relay 2
Open
Relay 3
Open
Relay 4
Trailer tow back-up lamps
Relay 5
Open
Relay 6
Open
Relay 7
Trailer tow battery charge
Relay 8
Trailer tow park lamps
Relay 9
Open
Relay 10
Puddle lamps
Diode 11
Open
Diode 12
Open
CHANGING THE TIRES
If you get a flat tire while driving:
do not brake heavily.
gradually decrease the vehicle’s speed.
hold the steering wheel firmly.
slowly move to a safe place on the side of the road.
Roadside Emergencies
211