Acura RSX - 2006 Fuse Box Diagram

Acura RSX - 2006 Fuse Box Diagram

ʵ
Auto reverse stops sensing when the
window is almost closed. You should
always check that all passengers and
objects are away from the window
before closing it.
If your vehicle’s battery is
disconnected or goes dead, or the
driver’s window fuse is removed, the
AUTO function will be disabled. The
power window system needs to be
reset after reconnecting the battery
or installing the fuse.
Start the engine. Push down and
hold the driver’s window switch
until the window is fully open.
Pull and hold the driver’s window
switch to close the window
completely, then hold the switch
for a second or two more.
If the driver’s
window senses any obstacle while it
is closing automatically, it will
reverse direction, and then stop. To
close the window, remove the
obstacle, then use the window switch
again.
If the power windows do not operate
properly after resetting, have your
vehicle checked by your dealer.
1.
2.
Power Windows
AUTO REVERSE
78
ʵ
ʵ
Each preset button can
store one frequency on AM and two
frequencies on FM.
Select the desired band, AM or
FM. FM1 and FM2 let you store
two frequencies with each preset
button.
Use the TUNE, SEEK, or SCAN
function to tune the radio to a
desired station.
Pick a preset button, and hold it
until you hear a beep.
Repeat steps 1 through 3 to store a
total of six stations on AM and
twelve stations on FM.
The preset frequencies will be lost if
your vehicle’s battery goes dead, is
disconnected, or the radio fuse is
removed.
If you are
traveling far from home and can no
longer receive the stations you
preset, you can use the auto select
feature to find stations in the local
area.
Press the A. SEL button. ‘‘A.SEL’’
will flash in the display, and the
system will go into scan mode for
several seconds. It stores the
frequencies of six AM stations and
twelve FM stations in the preset
buttons.
If you do not like the stations auto
select has stored, you can store
other frequencies on the preset
buttons. Use the TUNE, SEEK, or
SCAN function to find stations, then
store them in the preset buttons as
described previously.
press the
A. SEL button. This restores the
presets you originally set.
You will see a ‘‘0’’ displayed after
pressing a preset button if auto
select cannot find a strong station for
every preset button.
1.
2.
3.
4.
To turn off auto select,
CONTINUED
Preset
AUTO SELECT
Playing the Radio
Features
95
ʵ
ʵ
Each preset button can
store one frequency on AM and two
frequencies on FM.
Select the desired band, AM or
FM. FM1 and FM2 let you store
two frequencies with each preset
button.
Use the TUNE, SEEK, or SCAN
function to tune the radio to a
desired station.
Pick a preset button, and hold it
until you hear a beep.
Repeat steps 1 through 3 to store a
total of six stations on AM and
twelve stations on FM.
The preset frequencies will be lost if
your vehicle’s battery goes dead, is
disconnected, or the radio fuse is
removed.
If you are
traveling far from home and can no
longer receive the stations you
preset, you can use the auto select
feature to find stations in the local
area.
Press the A. SEL button. ‘‘A.SEL’’
will flash in the display, and the
system will go into scan mode for
several seconds. It stores the
frequencies of six AM stations and
twelve FM stations in the preset
buttons.
If you do not like the stations auto
select has stored, you can store
other frequencies on the preset
buttons. Use the TUNE, SEEK, or
SCAN function to find stations, then
store them in the preset buttons as
described previously.
press the
A. SEL button. This restores the
presets you originally set.
You will see a ‘‘0’’ displayed after
pressing a preset button if auto
select cannot find a strong station for
every preset button.
1.
2.
3.
4.
To turn off auto select,
Playing the Radio
Preset
AUTO SELECT
108
If you make a mistake entering the
code, do not start over; complete the
five-digit sequence, then enter the
correct code. You have 10 tries to
enter the correct code. If you are
unsuccessful in 10 attempts, you
must then leave the system on for 1
hour before trying again.
If the code card is lost, your dealer
can access your code with your
radio’s serial number. To access the
serial number, turn the radio on. It
must display ‘‘COdE’’, then turn the
radio off. Push the preset 1, preset 6,
and power buttons at the same time,
then quickly release.
You will have to store your favorite
stations in the preset buttons after
the system begins working. Your
original settings were lost when the
power was disconnected.
Your vehicle’s audio system will
disable itself if it is disconnected
from electrical power for any reason.
To make it work again, you must
enter a specific five-digit code in the
preset buttons. Because there are
hundreds of number combinations
possible from five-digits, making the
system work without knowing the
exact code is nearly impossible.
You should have received a card that
lists your audio system’s code
number and serial number. It is best
to store this card in a safe place at
home. In addition, you should write
the audio system’s serial number in
this owner’s manual. If you lose the
card, you must obtain the code
number from your dealer. To do this,
you will need the system’s serial
number.
If your vehicle’s battery is
disconnected or goes dead, or the
radio fuse is removed, the audio
system will disable itself. If this
happens, you will see ‘‘COdE’’ in the
frequency display the next time you
turn on the system. Use the preset
buttons to enter the five-digit code.
The code is located on the radio code
card included in your owner’s
manual kit. When it is entered
correctly, the radio will start playing.
Theft Protection
Radio Theft Protection
Features
125
Turn the ignition switch to the
START (III) position. If the
headlights do not dim, check the
condition of the fuses. If the fuses
are OK, there is probably
something wrong with the
electrical circuit for the ignition
switch or starter motor. You will
need a qualified technician to
determine the problem (see
on page
).
In this case, the starter motor’s
speed sounds normal, or even faster
than normal, when you turn the
ignition switch to the START (III)
position, but the engine does not run.
Are you using a properly coded
key? An improperly coded key will
cause the immobilizer system
indicator in the instrument panel
to blink rapidly (see page
).
Are you using the proper starting
procedure? Refer to
on page
.
Do you have fuel? Check the fuel
gauge; the low fuel indicator may
not be working.
There may be an electrical
problem, such as no power to the
fuel pump. Check all the fuses
(see page
).
If you find nothing wrong, you will
need a qualified technician to find
the problem. See
on page
.
If the headlights dim noticeably or
go out when you try to start the
engine, either the battery is
discharged or the connections are
corroded. Check the condition of
the battery and terminal
connections (see page
). You
can then try jump starting the
vehicle from a booster battery
(see page
).
65
225
200
212
147
220
225
If the Engine Won’t Start
Emergency Towing
The Starter Operates Normally
Starting the
Engine
Emergency
Towing
Taking Care of the Unexpected
211
Use a screwdriver or coin to
remove the round plug in the
center of the headliner.
Insert the moonroof wrench into
the socket behind this plug. Turn
the wrench until the moonroof is
fully closed.
Get the moonroof wrench out of
the tool kit in the cargo area.
Try closing the moonroof. If the
new fuse blows immediately or the
moonroof motor still does not
operate, you can close the
moonroof manually.
Check the fuse for the moonroof
motor (see page
). If the fuse
is blown, replace it with one of the
same or lower rating.
Remove the wrench. Reinstall the
round plug.
If the electric motor will not close
the moonroof, do the following:
If you need to close the moonroof
manually, it means the moonroof
opening/closing function is
developing a problem. Have your
vehicle checked by your dealer.
5.
6.
4.
1.
2.
3.
223
If equipped
Closing the Moonroof
Taking Care of the Unexpected
219
ROUND PLUG
SOCKET
The vehicle’s fuses are located in
two fuse boxes. The interior fuse
box is underneath the steering
column.
The under-hood fuse box is in the
engine compartment next to the
battery.
If something electrical in your
vehicle stops working, the first thing
you should check for is a blown fuse.
Determine from the chart on pages
and
, or the diagram on the
fuse box lid, which fuse or fuses
control that device. Check those
fuses first, but check all the fuses
before deciding that a blown fuse is
the cause. Replace any blown fuses,
and check if the device works.
Turn the ignition switch to the
LOCK (0) position. Make sure the
headlights and all other
accessories are off.
Remove the cover from the fuse
box.
1.
2.
223
224
Fuses
Checking and Replacing Fuses
220
INTERIOR
UNDER-HOOD
TAB
CONTINUED
Check each of the large fuses in
the under-hood fuse box by
looking through the top at the wire
inside. Removing these fuses
requires a Phillips-head screw-
driver.
Check the smaller fuses in the
under-hood fuse box and all the
fuses in the interior fuse box by
pulling out each fuse with the fuse
puller provided in the interior fuse
box.
Look for a blown wire inside the
fuse. If it is blown, replace it with
one of the spare fuses of the same
rating or lower.
3.
4.
5.
Fuses
Taking Care of the Unexpected
221
FUSE
BLOWN
BLOWN
If the replacement fuse of the
same rating blows in a short time,
there is probably a serious
electrical problem with your
vehicle. Leave the blown fuse in
that circuit, and have your vehicle
checked by a qualified mechanic.
If the driver’s power window fuse is
removed, the AUTO function of the
driver’s window will be disabled. To
reset the AUTO function, see page
.
If the radio fuse is removed, the
audio system will disable itself. The
next time you turn on the radio you
will see ‘‘Code’’ in the frequency
display. Use the preset buttons to
enter the five-digit code (see page
).
If you cannot drive the vehicle
without fixing the problem, and you
do not have a spare fuse, take a fuse
of the same rating or a lower rating
from one of the other circuits. Make
sure you can do without that circuit
temporarily (such as the accessory
power socket or radio).
If you replace the blown fuse with a
spare fuse that has a lower rating, it
might blow out again. This does not
indicate anything wrong. Replace the
fuse with one of the correct rating as
soon as you can.
6.
78
125
Fuses
222
Replacing a fuse with one that has a
higher rating greatly increases the
chances of damaging the electrical
system. If you do not have a
replacement fuse with the proper rating
for the circuit, install one with a lower
rating.
ˎ
ˎ
ˎ
ˎ
ˎ
ʵ
ʵ
ʵ
ʵ
ˎ
ˎ
ˎ
CONTINUED
Circuits Protected
Amps.
No.
No.
Circuits Protected
Amps.
Daytime Running Lights
SRS
Power Mirror
Bass Speaker
Heated Seats
Fuel Pump
Accessory Power Socket
Turn Signal
Front Wiper
Not Used
Front Passenger’s Power Window
Driver’s Power Window
Not Used
Not Used
7.5A
10A
10A
20A
20A
15A
15A
7.5A
20A
20A
20A
12
13
14
15
16
17
18
19
20
21
22
23
24
25
1
2
3
4
5
6
7
8
9
10
11
Ignition Coil
Laf Heater
Daytime Running Lights
Rear Accessory Power Socket
ACG (IG)
Not Used
Power Window Relay
Moonroof
Radio
Rear Wiper
Gauge panel
ABS
15A
20A
10A
10A
7.5A
20A
7.5A
10A
7.5A
7.5A
1 :
2 :
3 :
Canadian models only
U. S. models only
Type-S only
1
3
1
1
2
Fuse Locations
Taking Care of the Unexpected
223
INTERIOR FUSE BOX
ʵ
ʵ
ʵ
ˎ
ˎ
ˎ
ˎ
Amps.
Circuits Protected
No.
30 A
10 A
7.5 A
20 A
10 A
20 A
15 A
20 A
7.5 A
30 A
40 A
40 A
40 A
30 A
20 A
15 A
20 A
100 A
40 A
50 A
Condenser fan
Small Light
Interior Light
Cooling Fan
Hazard
FI ECU (ECM/PCM)
Horn, Stop
ABS (F/S)
Back Up
ABS Motor
Rear Demister
Heater Motor
Power Window
Option
Left Headlight
Door Lock
Right Headlight
Not Used
Main Fuse Battery
Main Fuse Ignition
Spare Fuse
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
25
1 :
2 :
U.S. models
Canadian models
1
2
Fuse Locations
224
UNDER HOOD FUSE BOX
ʵ
ʵ
ˎ
ˎ
ˎ
ʵ
ʵ
ʵ
ʵ
ʵ
ʵ
ʵ
ʵ
ʵ
ʵ
ʵ
ʵ
ʵ
ʵ
ʵ
ʵ
ˎ
ˎ
ˎ
ˎ
ˎ
ˎ
Specifications
Technical Information
231
Capacities
Fuses
Alignment
Battery
Tires
Lights
0.0 in (0 mm)
0.08 in (2.0 mm)
0°30’
1.8 US qt (1.7
)
1.6 US qt (1.5
)
2.9 US qt (2.7
)
6.9 US qt (6.5
)
2.6 US qt (2.5
)
4.8 US qt (4.5
)
1°00’
2°53’
P205/55R16 89V
P195/65R15 89H
Manual
transmission
fluid
Interior
Under-hood
Toe-in
Camber
Caster
12 V
12 V
12 V
12 V
5 W
65 W
21 W
55 W
60 psi (420 kPa , 4.2 kgf/cm
)
31 psi (220 kPa , 2.2 kgf/cm
)
31 psi (220 kPa , 2.2 kgf/cm
)
T125/70D16 96M
T135/70D15 99M
Capacity
12 V
36 AH/5 HR
12 V
12 V
12 V
12 V
12 V
12 V
12 V
12 V
12 V
12 V
3.4 W
8 W
5 W
8 W
5 W
18 W
5 W
21 W
21 W/5 W
21 W
12 V
5 W
Size
Pressure
P215/45R17 87V
Headlights
Front turn signal lights
Front parking lights
Front side marker lights
Rear turn signal lights
Brake/Taillights
High-mount brake light
Rear side marker lights
Back-up lights
License plate lights
Ceiling light
Cargo area light
Spotlights
Glove box light
See page
223
or the fuse label
attached to the inside of the fuse
box door under the dashboard.
See page
224
or the fuse box
cover.
High
Low
Front
Rear
Front
Rear
Front
Type-S
Change
Total
Change
Total
U.S. vehicles
Canadian
vehicles
1 :
2 :
3 :
Front/Rear
Spare
Front
Rear
Spare
(HB3)
(Amber)
(Amber)
Canadian standard model
U.S. base model and Canadian Premium models
Automatic trans-
mission fluid
Windshield
washer reservoir
1
2
3
1,
2
3