Pontiac G3 - 2009 Fuse Box Diagram

Pontiac G3 - 2009 Fuse Box Diagram

Vehicle Symbol Chart
Here are some additional symbols that may be found on
the vehicle and what they mean. For more information
on the symbol, refer to the index.
9
:
Airbag Readiness Light
#
:
Air Conditioning
!
:
Antilock Brake System (ABS)
g
:
Audio Steering Wheel Controls or OnStar
®
$
:
Brake System Warning Light
"
:
Charging System
I
:
Cruise Control
B
:
Engine Coolant Temperature
O
:
Exterior Lamps
#
:
Fog Lamps
.
:
Fuel Gage
+
:
Fuses
i
:
Headlamp High/Low-Beam Changer
j
:
LATCH System Child Restraints
*
:
Malfunction Indicator Lamp
:
:
Oil Pressure
}
:
Power
/
:
Remote Vehicle Start
>
:
Safety Belt Reminders
7
:
Tire Pressure Monitor
F
:
Traction Control
M
:
Windshield Washer Fluid
iv
Immobilizer Operation
The vehicle may have a passive theft-deterrent system.
The immobilizer system prevents the vehicle from
being started by an unauthorized person by isolating
the power supply to the ignition system, the fuel pump
and the fuel injectors.
The system is automatically armed when the key is
removed from the ignition. You do not have to manually
arm or disarm the system.
Your vehicle has a special key that works with the
theft-deterrent system. There is a transponder in the key
head that is electronically coded. The correct key will start
the vehicle. An invalid key immobilizes the engine. If your
key is ever damaged, you may not be able to start your
vehicle.
When trying to start the vehicle, if the engine does not
start and the security light flashes or comes on, there may
be a problem with the theft-deterrent system. Turn the
ignition off and try again.
If the engine still does not start, and the key appears to
be undamaged, try another key. At this time, you may
also want to check the fuse. See
Fuses and Circuit
Breakers on page 5-88
. If the engine still does not start
with the other key, your vehicle needs service. If your
vehicle does start, the first key may be faulty. See your
dealer/retailer who can have a new key made.
Up to 10 keys may be programmed for the vehicle.
If you lose or damage your keys, only a dealer/retailer
can have new keys made.
If you are ever driving and the security light comes
on and stays on, you will be able to restart the engine
if you turn it off. The theft-deterrent system, however,
is not working properly and must be serviced by your
dealer/retailer. Your vehicle is not protected by the
theft-deterrent system at this time.
In an emergency, contact Roadside Assistance.
See
Roadside Assistance Program on page 7-7
.
2-14
Accessory Power Outlet(s)
Accessory power outlets can be used to plug in auxiliary
electrical equipment, such as a cellular phone.
The accessory power outlet is located next to the
parking brake on the center console.
To use the accessory power outlet, remove the
protective cap. When not in use, always cover the
outlet with the protective cap. The accessory power
outlet is operational when the ignition is turned to
ACC/ACCESSORY or ON/RUN.
Notice:
Leaving electrical equipment on for
extended periods will drain the battery. Always turn
off electrical equipment when not in use and do
not plug in equipment that exceeds the maximum
amperage rating.
Certain electrical accessories may not be compatible
with the accessory power outlet and could result
in blown vehicle or adapter fuses. If you experience
a problem, see your dealer/retailer for additional
information on accessory power outlets.
Notice:
Adding any electrical equipment to the
vehicle can damage it or keep other components
from working as they should. The repairs would not
be covered by the vehicle warranty. Do not use
equipment exceeding maximum amperage rating of
20 amperes. Check with your dealer/retailer before
adding electrical equipment.
When adding electrical equipment, be sure to follow
the proper installation instructions included with
the equipment.
Notice:
Improper use of the power outlet can cause
damage not covered by the warranty. Do not hang
any type of accessory or accessory bracket from the
plug because the power outlets are designed for
accessory power plugs only.
3-16
Ashtray(s) and Cigarette Lighter
The ashtray is located at the lower part of the center
instrument panel. To remove the front ashtray for
cleaning, open the ashtray fully, press in the retaining
tab and pull the bin out.
Notice:
If papers, pins, or other flammable items
are put in the ashtray, hot cigarettes or other
smoking materials could ignite them and possibly
damage the vehicle. Never put flammable items
in the ashtray.
The cigarette lighter is located to the right of the front
ashtray. To use it, turn the ignition to ACC/ACCESSORY
or ON/RUN, push the cigarette lighter in all the way
and let go. When it is ready, it will pop back out.
Notice:
Holding a cigarette lighter in while it is
heating will not allow the lighter to back away from
the heating element when it is hot. Damage from
overheating may occur to the lighter or heating
element. Do not hold a cigarette lighter in while it
is heating.
Clock
There is a digital clock located in the center of the
instrument panel, above the center air outlets. When the
ignition is turned to ACC/ACCESSORY or ON/RUN,
the time is displayed in the digital clock. There are
three buttons for adjusting the digital clock:
H (Hour):
Press once to go forward one hour. To go
forward more than one hour, press and hold the button
until the correct hour is reached.
M (Minute):
Press once to go forward one minute.
To go forward more than one minute, press and hold
the button until the correct minute is reached.
S (Set):
Press to reset the time to the nearest hour.
For example, if the set button is pressed while the time
is between 8:00 and 8:29, the display is set to 8:00.
If this button is pressed while the time is between 8:30
and 8:59, the display is set to 9:00.
After disconnecting the battery or replacing the fuse,
reset the clock.
3-17
Emissions Inspection and
Maintenance Programs
Some state/provincial and local governments have or
might begin programs to inspect the emission control
equipment on the vehicle. Failure to pass this inspection
could prevent getting a vehicle registration.
Here are some things to know to help the vehicle pass
an inspection:
The vehicle will not pass this inspection if the check
engine light is on with the engine running, or if the
key is in the ON/RUN and the light is not on.
The vehicle will not pass this inspection if the
OBD II (on-board diagnostic) system determines
that critical emission control systems have not
been completely diagnosed by the system.
The vehicle would be considered not ready for
inspection. This can happen if the battery has
recently been replaced or if the battery has run
down. The diagnostic system is designed to
evaluate critical emission control systems during
normal driving. This can take several days of routine
driving. If this has been done and the vehicle still
does not pass the inspection for lack of OBD II
system readiness, your dealer/retailer can prepare
the vehicle for inspection.
Oil Pressure Light
If the vehicle has low
engine oil pressure, this
light will stay on after
the engine has been
started, or come on
while driving.
This indicates that the engine is not receiving enough
oil. The engine could be low on oil, or could have some
other oil problem. Have it fixed immediately by your
dealer/retailer.
The oil light could also come on in three other situations:
When the ignition is on but the engine is not
running, the light will come on as a test to show it is
working. It goes out when the ignition is turned
on. If it does not come on with the ignition on, there
may be a problem with the fuse or bulb. Have it
fixed right away.
If the vehicle comes to a hard stop, the light may
come on for a moment. This is normal.
3-34
A.
Engine Air Cleaner/Filter on page 5-18
.
B. Engine Oil Fill Cap. See “When to Add Engine Oil”
under
Engine Oil on page 5-13
.
C. Brake/Clutch Fluid Reservoir. See “Brake Fluid”
under
Brakes on page 5-32
and
Hydraulic Clutch
on page 5-21
.
D. Engine Coolant Surge Tank. See
Cooling System on
page 5-22
.
E.
Engine Compartment Fuse Block on page 5-90
.
F.
Battery on page 5-35
.
G. Windshield Washer Fluid Reservoir. See “Adding
Washer Fluid” under
Windshield Washer Fluid
on page 5-31
.
H. Engine Oil Dipstick. See “Checking Engine Oil”
under
Engine Oil on page 5-13
.
I. Automatic Transmission Dipstick. See
Automatic
Transmission Fluid on page 5-19
.
J. Power Steering Fluid Reservoir. See
Power Steering
Fluid on page 5-30
.
Engine Oil
If the engine oil pressure
light comes on, check the
engine oil level right away.
The oil pressure light is on the instrument panel cluster.
See
Oil Pressure Light on page 3-34
. Check the engine
oil level regularly; this is an added reminder.
5-13
Engine Identification
The eighth character in the VIN is the engine code.
This code helps identify the vehicle’s engine,
specifications, and replacement parts. See “Engine
Specifications” under
Capacities and Specifications
on page 5-93
for the vehicle’s engine code.
Service Parts Identification Label
This label is on the inside of the glove box. It is
very helpful if parts need to be ordered. The label
has the following information:
Vehicle Identification Number (VIN)
Model designation
Paint information
Production options and special equipment
Do not remove this label from the vehicle.
Electrical System
Add-On Electrical Equipment
Notice:
Do not add anything electrical to the
vehicle unless you check with your dealer/retailer
first. Some electrical equipment can damage
the vehicle and the damage would not be covered
by the vehicle’s warranty. Some add-on electrical
equipment can keep other components from
working as they should.
Add-on equipment can drain the vehicle battery, even if
the vehicle is not operating.
The vehicle has an airbag system. Before attempting to
add anything electrical to the vehicle, see
Servicing
Your Airbag-Equipped Vehicle on page 1-70
.
Headlamp Wiring
The headlamp wiring is protected by fuses in the fuse
block. An electrical overload will cause the lamps to turn
off. If this happens, have the headlamp wiring checked
right away.
5-87
Windshield Wiper Fuses
The windshield wiper motor is protected by a circuit
breaker and a fuse. If the motor overheats due to heavy
snow, etc., the wiper will stop until the motor cools. If the
overload is caused by some electrical problem, have it
fixed.
Power Windows and Other Power
Options
Circuit breakers in the fuse block protect the power
windows and other power accessories. When the current
load is too heavy, the circuit breaker opens and closes,
protecting the circuit until the problem is fixed or
goes away.
Fuses and Circuit Breakers
The wiring circuits in the vehicle are protected from
short circuits by a combination of fuses, circuit breakers
and fusible thermal links. This greatly reduces the
chance of fires caused by electrical problems.
Look at the silver-colored band inside the fuse. If the
band is broken or melted, replace the fuse. Be sure you
replace a bad fuse with a new one of the identical
size and rating.
Fuses of the same amperage can be temporarily
borrowed from another fuse location, if a fuse goes out.
Replace the fuse as soon as you can.
5-88
Instrument Panel Fuse Block
The instrument panel fuse block is located on the end of
the instrument panel on the driver side of the vehicle.
To access the fuses, open the fuse panel door by
pulling the door out.
To reinstall the door, first insert the rear edge of the
fuse panel door, then push the front of the door into the
end of the instrument panel to secure it.
Fuses
Usage
AUDIO
Audio, Clock, Immobilizer
AUDIO/RKE
A/C Switch, Clock, Power
Mirror Unit, Audio, Anti-Theft
Module, TPMS
B/UP LAMP
PNP Switch, Reverse Lamp Switch
BLANK
Not Used
BLANK
Not Used
BLANK
Not Used
5-89
Fuses
Usage
BLANK
Not Used
CIGAR
Cigar Lighter
CLUSTER
Brake Switch, TPMS, Anti-Theft
Module
DEFOG
MIRROR
Power Mirror Unit, A/C Switch
RR DEFOG
Rear Defog
DOOR LOCK
Door Lock
NA DRL
NA DRL Circuit
MIRROR/
SUNROOF
Mirror Control Switch, Room Lamp,
A/C Switch
EMS 1
Engine Room Fuse Block, TCM,
VSS, Fuel Pump
EMS 2
Stoplamp Switch
HORN
Horn
OBD
DLC, Immobilizer
CLUSTER/
ROOM LAMP
Trunk Room Lamp, Trunk Open
Switch, IPC, Room Lamp
SDM
Sensing and Diagnostic Module
Fuses
Usage
SOKET
Power Jack
STOP LAMP
Brake Switch
SUNROOF
Sunroof Module (Option)
T/SIG
Hazard Switch
WIPER
Wiper Switch, Wiper Motor
Engine Compartment Fuse Block
The engine compartment fuse block is located on the
driver side of the vehicle, near the battery. See
Engine
Compartment Overview on page 5-12
for more
information on location.
Notice:
Spilling liquid on any electrical components
on the vehicle may damage it. Always keep the
covers on any electrical component.
To access the fuses, press in the side flaps to release
the cover. To reinstall the cover, push the cover until it is
secure.
5-90
Fuses
Usage
FAN HI
Cooling Fan HI Relay
ABS-1
EBCM
ABS-2
EBCM
SJB BATT
Instrument Panel Fuse Block
Fuses
Usage
ACC/IG1
IGN1 Relay
IG2/ST
IGN2 Relay, Starter Relay
ACC/RAP
Instrument Panel Fuse Block
P/WINDOW-2
Power Window Switch
5-91
Fuses
Usage
P/W
WINDOW-1
Power Window Switch
FAN LOW
Cooling Fan LOW Relay
A/CON
A/C Compressor Relay
PKLP LH
Tail Lamp (LH), Side Marker (LH),
Turn Signal & Parking Lamp (LH),
License Lamp
PKLP RH
Tail Lamp (RH), Side Marker (RH),
Turn Signal & Parking Lamp (RH),
License Lamp, I/P Fuse Block
ECU
ECM, TCM
FRT FOG
Front Fog Lamp Relay
F/PUMP
Fuel Pump Relay
HAZARD
Hazard Switch, Hood Contact Switch
HDLP HI LH
Head Lamp (LH), IPC
HDLP HI RH
Head Lamp (RH)
IPC
IPC
HDLP LO LH
Head Lamp (LH), I/P Fuse Block
HDLP LO RH
Head Lamp (RH)
EMS-1
ECM, Injector
DLIS
Ignition Switch
EMS-2
EVAP Canister Purge Solenoid,
Thermostat Heater, HO2S,
MAF Sensor
SPARE
Not Used
Relays
Usage
F/PUMP
RELAY
Fuel Pump
STARTER
RELAY
Starter
PARK LAMP
RELAY
Park Lamp
FRONT FOG
RELAY
Fog Lamp
HDLP HIGH
RELAY
Head Lamp High
HDLP LOW
RELAY
Head Lamp Low
FAN HIGH
RELAY
Cooling Fan High
FAN LOW
RELAY
Cooling Fan Low
A/CON RELAY
Air Conditioner
ENGINE MAIN
RELAY
Main Power
ACC/RAP
RELAY
I/P Fuse Block
IGN-2 RELAY
Ignition
Misc.
Usage
FUSE PULLER
Fuse Puller
5-92