Pontiac Grand Prix - 2007 Fuse Box Diagram

Pontiac Grand Prix - 2007 Fuse Box Diagram

The main components of the instrument panel are the following:
A. Side Window Defogger Outlets. See
Outlet
Adjustment on page 166
.
B. Air Outlets. See
Outlet Adjustment on page 166
.
C. Turn Signal/Multifunction Lever and Cruise
Controls. See
Turn Signal/Multifunction Lever
on page 135
and
Cruise Control on page 140
.
D. TAP-Shift
®
Control (If Equipped). See
Automatic Transaxle Operation on page 110
.
E. Hazard Warning Flashers Button. See
Hazard Warning Flashers on page 134
.
F. Instrument Panel Cluster. See
Instrument Panel
Cluster on page 169
.
G. Windshield Wiper Lever. See
Windshield Wiper
Lever on page 138
.
H. Ignition. See
Ignition Positions on page 105
.
I. Driver Information Center (DIC) (If Equipped).
See
Driver Information Center (DIC) on
page 186
.
J. Audio System. See
Audio System(s) on
page 233
.
K. Audio Steering Wheel Controls (If Equipped).
See
Audio Steering Wheel Controls on
page 277
.
L. Hood Release. See
Hood Release on page 345
.
M. Tilt Steering Wheel Lever, on Steering Column.
See
Tilt Wheel on page 135
.
N. Interior Lamps Brightness Control. See
Interior
Lamps on page 146
.
O. Passenger Air Bag Status Indicator. See
Passenger Airbag Status Indicator on page 173
.
P. Climate Controls. See
Climate Control
System on page 157
.
Q. Shift Lever. See
Automatic Transaxle Operation
on page 110
.
R. Traction Control Button (If Equipped). See
Traction Control System (TCS) on page 292
.
S. Head Up Display (HUD) Control (If Equipped).
See
Head-Up Display (HUD) on page 151
.
T. Glove Box. See
Glove Box on page 126
.
U. Instrument Panel Fuse Block. See
Instrument
Panel Fuse Block on page 460
.
133
Flash-to-Pass Feature. See
Flash-to-Pass on
page 137
.
I
Cruise Control. See
Cruise Control on
page 140
.
P
Exterior Lamps Control. See
Exterior
Lamps on page 144
.
Turn and Lane-Change Signals
To signal a turn, move the turn signal lever located
on the left side of the steering column all the
way up or down. The lever returns automatically
when the turn is complete.
An arrow on the
instrument panel cluster
will flash in the
direction of the turn or
lane change.
If the vehicle is equipped with the Head-Up-Display
(HUD), a right or left turn signal will appear in
the HUD area when making turns or lane changes.
See
Head-Up Display (HUD) on page 151
for
more information.
Raise or lower the lever until the arrow starts to
flash to signal a lane change. Hold it there until the
lane change is complete. The lever returns to its
original position when it is released.
Arrows that flash rapidly when signaling for a turn
or lane change may be caused by a burned-out
signal bulb. Other drivers will not see the signal.
Replace burned-out bulbs to help avoid possible
accidents. See
Replacement Bulbs on page 398
,
Front Turn Signal, Parking and Fog Lamps on
page 394
, and
Taillamps, Turn Signal, and
Stoplamps on page 395
. Also, check the fuse for
burned-out bulbs if a turn signal arrow fails to
work when signaling a turn. See
Fuses and Circuit
Breakers on page 460
for location information.
Turn Signal On Chime
If the turn signal is left on for more than
0.75 of a mile (1.21 km), a warning chime will
sound and the TURN SIGNAL ON warning
message will appear on the Driver Information
Center (DIC) display. See “Turn Signal On” under
DIC Warnings and Messages on page 200
.
136
The HUD image displayed on the windshield will
automatically dim and brighten to compensate
for outside lighting.
The HUD image can temporarily light up
depending on the angle and position of the
sunlight on the HUD display. This is normal and
will change when the angle of the sunlight on
the HUD display changes.
Polarized sunglasses could make the HUD image
harder to see.
Care of the HUD
Clean the inside of the windshield as needed to
remove any dirt or film that could reduce the
sharpness or clarity of the HUD image.
To clean the HUD lens, use a soft, clean cloth that
has household glass cleaner sprayed on it.
Wipe the HUD lens gently, then dry it. Do not
spray cleaner directly on the lens because
the cleaner could leak into the unit.
If You Cannot See the HUD Image
When the Ignition Is On
Is anything covering the HUD lens?
Is the HUD dimmer setting bright enough?
Is the HUD image adjusted to the proper
height?
Are you wearing polarized sunglasses?
Still no HUD image? Check the fuse in the
instrument panel fuse block. See
Instrument
Panel Fuse Block on page 460
.
If the HUD Image Is Not Clear
Is the HUD image too bright?
Are the windshield and HUD lens clean?
If the HUD image is not correct, contact your
dealer.
Keep in mind that the windshield is part of the
HUD system. See
Windshield Replacement
on page 399
.
155
Accessory Power Outlet(s)
The vehicle has two
12-volt outlets which
can be used to plug in
electrical equipment.
One accessory power outlet is located on the
center console, below the front edge of the storage
console. The other is located inside the console.
Remove the tethered cap to use the outlet.
When not using the outlet, be sure to cover it with
the protective cap.
Notice:
Leaving electrical equipment plugged
in for an extended period of time while the
vehicle is off will drain the battery. Power is
always supplied to the outlets. Always unplug
electrical equipment when not in use and
do not plug in equipment that exceeds
the maximum 20 ampere rating.
Certain electrical accessories may not be
compatible with the accessory power outlet and
could result in blown vehicle or adapter fuses. See
your dealer for additional information on
accessory power outlets.
Notice:
Adding any electrical equipment to
your vehicle may damage it or keep other
components from working as they should. The
repairs would not be covered by your
warranty. Do not use equipment exceeding
maximum amperage rating of 20 amperes.
Check with your dealer before adding electrical
equipment.
When adding electrical equipment, be sure to
follow the proper installation instructions included
with it.
Notice:
Improper use of the power outlet can
cause damage not covered by your warranty.
Do not hang any type of accessory or
accessory bracket from the plug because the
power outlets are designed for accessory
power plugs only.
156
Ashtray(s) and Cigarette Lighter
Your vehicle may have a removable muffin
tin ashtray and cigarette lighter. The muffin tin
ashtray can be placed into the front center console
cupholder. To use the lighter, located on the
center console, push it in all the way and let go.
When it is ready, it will pop back out by itself.
Notice:
Holding a cigarette lighter in while it
is heating will not allow the lighter to back
away from the heating element when it is hot.
Damage from overheating may occur to the
lighter or heating element, or a fuse could be
blown. Do not hold a cigarette lighter in
while it is heating.
Notice:
If you put papers, pins, or other
flammable items in the ashtray, hot cigarettes
or other smoking materials could ignite
them and possibly damage your vehicle. Never
put flammable items in the ashtray.
Climate Controls
Climate Control System
The climate control system allows manual control
of the heating, cooling, and ventilation in the
vehicle.
157
A. Windshield Washer Fluid Reservoir. See
“Adding Washer Fluid” under
Windshield
Washer Fluid on page 377
.
B. Battery. See
Battery on page 381
.
C. Remote Positive (+) Terminal. See
Jump
Starting on page 382
.
D. Underhood Fuse Block. See
Underhood Fuse
Block on page 462
.
E. Engine Coolant Recovery Tank. See
Cooling
System on page 366
.
F. Pressure Cap. See
Pressure Cap on page 364
.
G. Power Steering Fluid Reservoir (low in
engine compartment). See
Power Steering
Fluid on page 376
.
H. Supercharger Oil Fill Location (If Equipped).
See
Supercharger Oil on page 355
.
I. Electric Cooling Fan. See
Cooling System on
page 366
.
J. Engine Oil Dipstick. See “Checking Engine Oil”
under
Engine Oil on page 350
.
K. Engine Oil Fill Cap. See “When to Add Engine
Oil” under
Engine Oil on page 350
.
L. Engine Coolant Bleed Valve. See “How to Add
Coolant to the Radiator” under
Cooling
System on page 366
.
M. Automatic Transaxle Fluid Dipstick. See
“Checking the Fluid Level” under
Automatic
Transaxle Fluid on page 357
.
N. Brake Master Cylinder Reservoir. See “Brake
Fluid” under
Brakes on page 378
.
O. Engine Air Cleaner/Filter. See
Engine Air
Cleaner/Filter on page 355
.
347
A. Windshield Washer Fluid Reservoir. See
“Adding Washer Fluid” under
Windshield
Washer Fluid on page 377
.
B. Battery. See
Battery on page 381
.
C. Underhood Fuse Block. See
Underhood Fuse
Block on page 462
.
D. Remote Positive (+) Terminal. See
Jump
Starting on page 382
.
E. Pressure Cap. See
Pressure Cap on page 364
.
F. Power Steering Fluid Reservoir. See
Power
Steering Fluid on page 376
.
G. Engine Oil Dipstick. See “Checking Engine Oil”
under
Engine Oil on page 350
.
H. Engine Oil Fill Cap. See “When to Add Engine
Oil” under
Engine Oil on page 350
.
I. Automatic Transaxle Fluid Dipstick. See
“Checking the Fluid Level” under
Automatic
Transaxle Fluid on page 357
.
J. Brake Master Cylinder Reservoir. See “Brake
Fluid” under
Brakes on page 378
.
K. Engine Air Cleaner/Filter. See
Engine Air
Cleaner/Filter on page 355
.
L. Engine Coolant Recovery Tank. See
Cooling
System on page 366
.
349
Notice:
If you leave your radio or other
accessories on during the jump starting
procedure, they could be damaged. The repairs
would not be covered by your warranty.
Always turn off your radio and other
accessories when jump starting your vehicle.
3. Turn off the ignition on both vehicles.
Unplug unnecessary accessories plugged into
the cigarette lighter or the accessory power
outlet. Turn off the radio and all lamps that are
not needed. This will avoid sparks and help
save both batteries. And it could save
the radio!
4. Open the hood on the other vehicle and
locate the positive (+) and negative (
)
terminal locations on that vehicle.
You will not use your vehicle’s battery for jump
starting. It has a remote positive (+) jump
starting terminal, located on the underhood
fuse block, for that purpose.
If your vehicle has one
of the 3800 V6 engines,
to uncover the remote
positive (+) terminal,
press the tab at
the bottom of the fuse
block and lift the
cover up.
3800 V6 and 3800 V6
Supercharged Engines
383
If your vehicle has the
5.3L V8 engine, to
uncover the remote
positive (+) terminal,
remove the fuse
block cover.
Always use the remote positive (+) terminal
instead of the positive (+) terminal on the
battery. See
Engine Compartment Overview
on page 346
for more information on location.
{
CAUTION:
An electric fan can start up even when the
engine is not running and can injure you.
Keep hands, clothing and tools away from
any underhood electric fan.
{
CAUTION:
Fans or other moving engine parts can
injure you badly. Keep your hands away
from moving parts once the engine is
running.
5.3L V8 Engine
384
Electrical System
Add-On Electrical Equipment
Notice:
Do not add anything electrical to your
vehicle unless you check with your dealer
first. Some electrical equipment can damage
your vehicle and the damage would not
be covered by your warranty. Some add-on
electrical equipment can keep other
components from working as they should.
Add-on equipment can drain your vehicle’s battery,
even if your vehicle is not operating.
Your vehicle has an airbag system. Before
attempting to add anything electrical to your
vehicle, see
Servicing Your Airbag-Equipped
Vehicle on page 78
.
Headlamp Wiring
The headlamp circuit is protected by individual
fuses in the underhood fuse block. An electrical
overload will cause the fuse to blow. If this
happens, have the headlamp system checked
right away.
Windshield Wiper Fuses
The windshield wiper motor is protected by a
circuit breaker and a fuse. If the motor overheats
due to heavy snow, etc., the wiper will stop
until the motor cools. If the overload is caused by
some electrical problem, have it fixed.
Power Windows and Other Power
Options
Circuit breakers in the fuse panel protect the
power windows and other power accessories.
When the current load is too heavy, the circuit
breaker opens and closes, protecting the circuit
until the problem is fixed.
459
Fuses and Circuit Breakers
The wiring circuits in the vehicle are protected
from short circuits by a combination of fuses,
circuit breakers and fusible thermal links in the
wiring itself. This greatly reduces the chance
of fires caused by electrical problems.
Look at the silver-colored band inside the fuse. If
the band is broken or melted, replace the fuse.
Be sure to replace a bad fuse with a new one of
the identical size and rating. Spare fuses and
a fuse puller are located in the underhood
fuse block. See
Underhood Fuse Block
later in
this section.
Instrument Panel Fuse Block
Some fuses are in a
fuse block located on
the end of the
instrument panel on the
passenger side.
To get to the fuse block lift up on the side panel.
A fuse usage chart is on the inside of this
panel.
460
Fuse
Usage
RAP
Retained Accessory Power
SUN ROOF
Sunroof
CRUISE SW
Cruise Switch
PK LP
Parking Lamps
RR DEFOG
Rear Window Defogger
DR LK/TRUNK
Door Lock/Trunk
ONSTAR/ALDL Onstar
®
/Diagnostic Link
Fuse
Usage
CANISTER
Fuel Tank Solenoid Canister
PK LAMPS
Parking Lamps
RADIO/AMP
Radio Amplifier
RFA/MOD
Remote Function Activator
(Remote Keyless Entry)
DISPLAYS
Instrument Panel Displays/Head-Up
Display (HUD), Driver Information
Center (DIC)
INT LIGHT
Interior Lamps
HVAC
Climate Controls
CHMSL/BKUP
Center High Mounted Stop
Lamp/Back-Up Lamps
PWR WDO
Power Windows
SPRING
COIL 2
Steering Wheel Control Switches
PWR SEAT
Power Seat
TURN/HAZ
Turn Signals/Hazard
Warning Lamps
PWR MIRS
Power Mirrors
HTD SEAT
Heated Seat
To reinstall the end panel, position the lower
section with the edge of the instrument panel,
and press the sides of the panel until it snaps
into place.
461
Underhood Fuse Block
The underhood fuse
block is located on the
passenger’s side of
the vehicle in the engine
compartment.
To remove the fuse block cover, press in on the
tab at the bottom of the cover and pull up.
Fuses
Usage
1
Driver’s Side High-Beam Headlamp
2
Passenger’s Side High-Beam
Headlamp
3
Driver’s Side Low-Beam Headlamp
4
Passenger’s Side Low-Beam
Headlamp
3800 V6 Engine
462
Fuses
Usage
5
Windshield Wipers/Washer
6
Washer/Remote Vehicle Current
7
Fog Lamps (Option)
9
Airbag
10
Accessory Power
11
Horn
12
Emission
13
Air Conditioning Clutch
14
Oxygen Sensor
15
Powertrain Control Module
16
Powertrain Control
Module/Electronic Throttle Control
17
Electronic Throttle Control
18
Display
19
Anti-lock Brake Solenoid
20
Fuel Injection
21
Transaxle Solenoid
22
Fuel Pump
23
Anti-lock Brakes
Fuses
Usage
24
Electronic Ignition
26
Battery Main 1
27
Battery Main 2
28
Battery Main 3
29
Fan 1
30
Battery Main 4
31
Anti-lock Brake Motor
32
Fan 2
33
Starter
56
Air Pump
Relays
Usage
34
High-Beam Headlamps
35
Low-Beam Headlamps, Headlamp
Driver Module
36
Fog Lamps (Option)
37
Ignition 1
38
Air Conditioner Compressor
39
Horn
40
Powertrain
463
Relays
Usage
41
Fuel Pump
42
Fan 1
43
Fan 3
44
Windshield Wiper/High
45
Windshield Wiper
46
Fan 2
48
Crank
49
Spare Fuse
50
Spare Fuse
51
Spare Fuse
52
Blank
53
Blank
54
Blank
55
Fuse Puller
§
Air Conditioning Clutch
Fuses
Usage
HVAC
Climate Control System
FUEL/PUMP
Fuel Pump
AIRBAG/
DISPLAY
Airbag, Display
COMPASS
Compass
ABS
Anti-lock Brake System
5.3L V8 Engine
464
Fuses
Usage
ETC/ECM
Electronic Throttle Control, Engine
Control Module
A/C CMPRSR
Air Conditioning Compressor
INJ 1
Injectors 1
ECM/TCM
Engine Control Module, Transaxle
Control Module
TRANS
Transaxle
EMISSIONS 1
Emissions 1
ABS SOL
Anti-lock Brake Solenoid
ECM IGN
Engine Control Module, Ignition
INJ 2
Injectors 2
EMISSIONS 2
Emissions 2
WPR
Windshield Wipers
AUX PWR
Auxiliary Power
WSW/RVC
Windshield Washer, Regulated
Voltage Control
LT LO BEAM
Driver’s Side Low-Beam Headlamp
RT LO BEAM
Passenger’s Side Low-Beam
Headlamp
FOG LAMPS
Fog Lamps
LT HI BEAM
Driver’s Side High-Beam Headlamp
HORN
Horn
RT HI BEAM
Passenger’s Side High-Beam
Headlamp
Fuses
Usage
SPARE
Spare
SPARE
Spare
SPARE
Spare
SPARE
Spare
SPARE
Spare
Relays
Usage
BATT 4
Battery 4
FUEL/PUMP
Fuel Pump
BATT 1
Battery 1
A/C CMPRSR
Air Conditioning Compressor
STRTR
Starter
PWR/TRN
Powertrain
STRTR
Starter
ABS MTR
Anti-lock Brake System Motor
BATT 3
Battery 3
BATT 2
Battery 2
FAN 2
Cooling Fan 2
FAN 3
Cooling Fan 3
FAN 2
Cooling Fan 2
FAN 1
Cooling Fan 1
FAN 1
Cooling Fan 1
HDM
Headlamp Driver Module
465