Pontiac G6 - 2006 Fuse Box Diagram

Pontiac G6 - 2006 Fuse Box Diagram

PASS-Key
®
III+ Operation
Your vehicle is equipped with PASS-Key
®
III+
(Personalized Automotive Security System)
theft-deterrent system. PASS-Key
®
III+ is a passive
theft-deterrent system. This means you don’t have to do
anything special to arm or disarm the system. It works
when you insert or remove the key from the ignition.
When the PASS-Key
®
III+ system senses that someone
is using the wrong key, it prevents the vehicle from
starting. Anyone using a trial-and-error method to start
the vehicle will be discouraged because of the high
number of electrical key codes.
When trying to start the vehicle if the engine does not
start and the SECURITY light comes on, the key
may have a damaged transponder. Turn the ignition
off and try again.
If the engine still does not start, and the key appears to
be undamaged, try another ignition key. At this time,
you may also want to check the fuse, see
Fuses
on page 5-97
. If the engine still does not start with the
other key, your vehicle needs service. If your vehicle
does start, the first key may be faulty. See your dealer
who can service the PASS-Key
®
III+ to have a new
key made. In an emergency, contact Roadside
Assistance.
It is possible for the PASS-Key
®
III+ decoder to “learn”
the transponder value of a new or replacement key.
Up to 10 additional keys may be programmed for
the vehicle. The following procedure is for programming
additional keys only. If all the currently programmed
keys are lost or do not operate, you must see your
dealer or a locksmith who can service PASS-Key
®
III+
to have keys made and programmed to the system.
See your dealer or a locksmith who can service
PASS-Key
®
III+ to get a new key blank that is cut
exactly as the ignition key that operates the system.
To program the new key do the following:
1. Verify that the new key has “+” stamped on it.
2. Insert the already programmed key in the ignition
and start the engine. If the engine will not start,
see your dealer for service.
3. After the engine has started, turn the key to OFF,
and remove the key.
4. Insert the key to be programmed and turn it to the
ON position within five seconds of removing the
original key.
5. The SECURITY light will turn off once the key has
been programmed.
6. Repeat Steps 1 through 5 if additional keys are to
be programmed.
2-21
Turn and Lane-Change Signals
The turn signal has two upward (for right) and
two downward (for left) positions. These positions
allow you to signal a turn or a lane change.
To signal a turn, move the lever all the way up or down.
When the turn is finished, the lever will return
automatically.
An arrow on the instrument
panel cluster will flash in
the direction of the
turn or lane change.
To signal a lane change, just raise or lower the lever
until the arrow starts to flash. Hold it there until you
complete your lane change. The lever will return by itself
when you release it.
As you signal a turn or a lane change, if the arrows
flash rapidly, a signal bulb may be burned out and other
drivers won’t see your turn signal.
If a bulb is burned out, replace it to help avoid an
accident. If the arrows don’t go on at all when you signal
a turn, check for burned-out bulbs and then check the
fuse. See
Fuses on page 5-97
.
Headlamp High/Low-Beam Changer
To change the headlamps from low beam to high
beam, push the turn signal/multifunction lever away
from you.
When the high beams are
on, a light on the
instrument panel cluster
also will be on if the
ignition is in ON.
To change the headlamps from high beam to low beam,
pull the turn signal lever toward you.
Flash-to-Pass
This feature lets you use your high-beam headlamps to
signal a driver in front of you that you want to pass.
To use it, pull the turn signal/multifunction lever toward
you until the high-beam headlamps come on, then
release the lever to turn them off.
3-8
To reactivate the interior lamps, do one of the following:
Open any door.
Press any remote keyless entry transmitter button.
Press the power door lock switch.
Press the remote trunk release.
Turn the lamp that was left on to off and then to
on again.
Accessory Power Outlet(s)
Accessory power outlets can be used to connect
auxiliary electrical equipment such as a cellular
telephone or CB radio. The outlet can accept electrical
equipment rated at a maximum of 20 Amps.
There are two accessory power outlets. Both are
located on the center console below the climate controls
unless the vehicle is equipped with enhanced traction
or traction control system. If the vehicle is equipped with
a traction system, one accessory power outlet is in
the center storage console and the other is located on
the center console below the climate controls.
To use an outlet, remove the protective cap. When not
in use, always cover the outlet with the protective
cap. The accessory power outlet is operational at
all times.
Notice:
Leaving electrical equipment on for
extended periods will drain the battery. Always turn
off electrical equipment when not in use and do
not plug in equipment that exceeds the maximum
amperage rating.
Certain electrical accessories may not be compatible
with the accessory power outlet and could result
in blown vehicle or adapter fuses. If you experience a
problem, see your dealer for additional information
on the accessory power outlet.
Notice:
Adding any electrical equipment to your
vehicle may damage it or keep other components
from working as they should. The repairs would not
be covered by your warranty. Do not use equipment
exceeding maximum amperage rating. Check
with your dealer before adding electrical equipment.
When adding electrical equipment, be sure to follow
the proper installation instructions included with
the equipment.
Notice:
Improper use of the power outlet can cause
damage not covered by your warranty. Do not
hang any type of accessory or accessory bracket
from the plug because the power outlets are
designed for accessory power plugs only.
3-19
1. Position the vehicle to tow and then secure it.
2. Turn the ignition to OFF.
3. Set the parking brake.
4. To prevent your battery from draining while the
vehicle is being towed, remove the following
fuse from the engine compartment fuse block:
(20 BCM 1). See
Rocking Your Vehicle to Get It
Out on page 4-32
for more information.
5. Turn the ignition to ACC.
6. Shift your transaxle to Neutral (N).
7. Release the parking brake.
Notice:
If you exceed 65 mph (105 km/h) while
towing your vehicle, it could be damaged. Never
exceed 65 mph (105 km/h) while towing your vehicle.
Notice:
Towing your vehicle from the rear could
damage it. Also, repairs would not be covered by
the warranty. Never have your vehicle towed from
the rear.
4-39
A. Engine Air Cleaner/Filter. See
Engine Air
Cleaner/Filter on page 5-22
.
B. Engine Oil Fill Cap. See “When to Add Engine Oil”
under
Engine Oil on page 5-17
.
C. Engine Oil Dipstick. See “Checking Engine Oil”
under
Engine Oil on page 5-17
.
D. Engine Coolant Reservoir. See
Engine Coolant
on page 5-27
.
E. Brake Fluid Reservoir. See “Brake Fluid” under
Brakes on page 5-39
.
F. Battery. See
Battery on page 5-42
.
G. Windshield Washer Fluid Reservoir. See “Adding
Washer Fluid” under
Windshield Washer Fluid
on page 5-38
.
H. Engine Compartment Fuse Block. See
Engine
Compartment Fuse Block on page 5-100
.
5-13
A. Engine Air Cleaner/Filter. See
Engine Air
Cleaner/Filter on page 5-22
.
B. Engine Oil Fill Cap. See “When to Add Engine Oil”
under
Engine Oil on page 5-17
.
C. Engine Oil Dipstick. See “Checking Engine Oil”
under
Engine Oil on page 5-17
.
D. Engine Coolant Reservoir. See
Engine Coolant
on page 5-27
.
E. Brake Fluid Reservoir. See “Brake Fluid” under
Brakes on page 5-39
.
F. Battery. See
Battery on page 5-42
.
G. Engine Compartment Fuse Block. See
Engine
Compartment Fuse Block on page 5-100
.
H. Windshield Washer Fluid Reservoir. See “Adding
Washer Fluid” under
Windshield Washer Fluid
on page 5-38
.
5-15
A. Engine Air Cleaner/Filter. See
Engine Air
Cleaner/Filter on page 5-22
.
B. Power Steering Fluid Reservoir. See
Power Steering
Fluid on page 5-37
.
C. Automatic Transaxle Fluid Dipstick (out of view). See
“Checking the Fluid Level” under
Automatic
Transaxle Fluid (2.4L LE5 and 3.5L LX9 Engines) on
page 5-23
or
Automatic Transaxle Fluid (3.9L LZ9 Engine)
on page 5-24
.
D. Engine Oil Fill Cap. See “When to Add Engine Oil”
under
Engine Oil on page 5-17
.
E. Engine Oil Dipstick. See “Checking Engine Oil”
under
Engine Oil on page 5-17
.
F. Engine Coolant Reservoir. See
Engine Coolant
on page 5-27
.
G. Brake Fluid Reservoir. See “Brake Fluid” under
Brakes on page 5-39
.
H. Battery. See
Battery on page 5-42
.
I. Windshield Washer Fluid Reservoir. See “Adding
Washer Fluid” under
Windshield Washer Fluid
on page 5-38
.
J. Engine Compartment Fuse Block. See
Engine
Compartment Fuse Block on page 5-100
.
Engine Oil
Checking Engine Oil
It is a good idea to check your engine oil every time you
get fuel. In order to get an accurate reading, the oil
must be warm and the vehicle must be on level ground.
The engine oil dipstick handle is a yellow loop. See
Engine Compartment Overview on page 5-12
for
the location of the engine oil dipstick.
1. Turn off the engine and give the oil several minutes
to drain back into the oil pan. If you do not do this,
the oil dipstick might not show the actual level.
2. Pull out the dipstick and clean it with a paper towel
or cloth, then push it back in all the way. Remove it
again, keeping the tip down, and check the level.
5-17
Electrical System
Add-On Electrical Equipment
Notice:
Don’t add anything electrical to your vehicle
unless you check with your dealer first. Some
electrical equipment can damage your vehicle and
the damage wouldn’t be covered by your warranty.
Some add-on electrical equipment can keep other
components from working as they should.
Your vehicle has an airbag system. Before attempting to
add anything electrical to your vehicle, see
Servicing
Your Airbag-Equipped Vehicle on page 1-70
.
Windshield Wiper Fuses
The windshield wiper motor is protected by an internal
circuit breaker and a fuse. If the motor overheats due to
heavy snow, etc., the wiper will stop until the motor
cools. If the overload is caused by some electrical
problem, have it fixed.
Power Windows and Other Power
Options
Fuses in the fuse block protect the power windows.
When the current load is too heavy, the fuse opens
protecting the circuit until the problem is fixed.
Fuses
The wiring circuits in your vehicle are protected from
short circuits by a combination of fuses, circuit breakers
and fusible links. This greatly reduces the chance of
damage caused by electrical problems.
Look at the silver-colored band inside the fuse. If the
band is broken or melted, replace the fuse. Be sure to
replace a bad fuse with a new one of the identical
size and rating.
There are three fuse blocks in your vehicle: one in the
center of the instrument panel, one in the engine
compartment and one in the trunk.
There is a fuse puller located on the instrument panel
fuse block. It can be used to easily remove fuses
from the fuse block.
5-97
Instrument Panel Fuse Block
The instrument panel fuse block is located on the passenger’s side of the vehicle, on the lower portion of the
instrument panel console near the floor.
Remove the console cover to access the fuse block, then remove the fuse block cover to access the fuses.
Your vehicle may not be equipped with all the fuses and features listed.
5-98
Fuses
Usage
POWER
MIRRORS
Power Mirrors
EPS
Electric Power Steering
RUN/CRANK
Cruise Control Switch, Passenger
Airbag Status Indicator, DSC Switch
HVAC
BLOWER HIGH
Heating Ventilation Air Conditioning
Blower - High Speed Relay
CLUSTER/
THEFT
Instrument Panel Cluster,
Theft Deterrent System
ONSTAR
OnStar
®
NOT
INSTALLED
Not Used
AIRBAG (IGN)
Airbag (Ignition)
HVAC CTRL
(BATT)
Heating Ventilation Air Conditioning
Control Diagnostic Link Connector
(Battery)
PEDAL
Adjustable Pedals
WIPER SW
Windshield Wiper/Washer Switch
IGN SENSOR
Ignition Switch
NOT
INSTALLED
Not Used
NOT
INSTALLED
Not Used
RADIO
Audio System
INTERIOR
LIGHTS
Interior Lamps
Fuses
Usage
NOT
INSTALLED
Not Used
POWER
WINDOWS
Power Windows (Sedan)
HVAC CTRL
(IGN)
Heating Ventilation Air Conditioning
Control (Ignition)
HVAC
BLOWER
Heating Ventilation Air Conditioning
Blower Switch
DOOR LOCK
Door Locks
ROOF/HEAT
SEAT
Sunroof, Heated Seat, Power
Windows (Coupe, Retractable
Hardtop)
NOT
INSTALLED
Not Used
NOT
INSTALLED
Not Used
AIRBAG
(BATT)
Airbag (Battery)
SPARE FUSE
HOLDER
Spare Fuse Holder
SPARE FUSE
HOLDER
Spare Fuse Holder
SPARE FUSE
HOLDER
Spare Fuse Holder
SPARE FUSE
HOLDER
Spare Fuse Holder
FUSE PULLER
Fuse Puller
5-99
Engine Compartment Fuse Block
Your vehicle may not be equipped with all the fuses and features listed.
The engine compartment fuse block is located on the driver’s side of the engine compartment, near the battery.
5-100
Fuses
Usage
1
Air Conditioner Clutch
2
Electronic Throttle Control
3
Ignition 1 Module, Starter
4
Transaxle, Transmission Control
Module Ignition 1
5
Injector
6
Emission
7
Left Headlamp Low Beam
8
Horn
9
Right Headlamp Low Beam
10
Front Fog Lamps
11
Left Headlamp High Beam
12
Right Headlamp High Beam
13
Powertrain Control Module Battery
14
Windshield Wiper
15
Anti-lock Brake System (IGN 1)
16
Powertrain Control Module
(Ignition 1)
17
Cooling Fan 1
18
Cooling Fan 2
Fuses
Usage
19
Run Relay, Heating, Ventilation,
Air Conditioning Blower
20
Body Control Module 1
21
Body Control Module Run/Crank
22
Rear Electrical Center 1
23
Rear Electrical Center 2
24
Anti-lock Brake System
25
Body Control Module 2
26
Starter
41
Electric Power Steering
42
Transmission Control Module
Battery
43
Ignition Module
44
Injectors
45
Intake Tuning Valve
46
Daytime Running Lamps
47
Center High-Mounted Stoplamp
50
Front Power Windows
Coupe/Retractable Hardtop
5-101
Relays
Usage
28
Cooling Fan 1
29
Cooling Fan Series/Parallel
30
Cooling Fan 2
31
Starter
32
Run/Crank, Ignition
33
Powertrain
34
Air Conditioning Clutch
35
High Beam
36
Front Fog Lamps
37
Horn
38
Low Beam
39
Windshield Wiper 1
40
Windshield Wiper 2
48
Daytime Running Lamps
49
Center High-Mounted Stoplamp
Diodes
Usage
27
Wiper
Rear Compartment Fuse Block
The rear compartment fuse block is located in the trunk
of the vehicle. Access the fuse block through the
trunk panel on the driver’s side of the rear cargo area.
5-102
Fuses
Usage
1
Rear Quarter Windows
2
Driver Seat Controls
3
Folding Top
4
Not Used
Fuses
Usage
5
Emission 2, Canister Vent Solenoid
6
Park Lamps, Instrument Panel
Dimming
7
Not Used
5-103
Fuses
Usage
8
Not Used
9
Sliding Panel Roof
10
Sunroof Controls
11
Not Used
12
Retractable Hardtop Controller
13
Audio Amplifier
14
Heated Seat Controls
15
Not Used
16
Remote Keyless Entry System,
XM Satellite Radio
17
Back-up Lamps
18
Not Used
19
Not Used
20
Cigarette Lighter, Auxiliary
Power Outlet
21
Not Used
22
Trunk Release
23
Rear Defog
Fuses
Usage
24
Not Used
25
Fuel Pump
Relays
Usage
26
Rear Window Defogger
27
Park Lamps
28
Not Used
29
Not Used
30
Not Used
31
Not Used
32
Not Used
33
Back-up Lamps
34
Not Used
35
Not Used
36
Trunk Release
37
Fuel Pump
38 (Diode)
Cargo Lamp
5-104