Saturn Ion - 2004 Fuse Box Diagram

Saturn Ion - 2004 Fuse Box Diagram

These are some examples of symbols that may be found on the vehicle:
v
As you signal a turn or a lane change, if the arrows
flash rapidly, a signal bulb may be burned out and other
drivers won’t see your turn signal.
If a bulb is burned out, replace it to help avoid an
accident. If the arrows don’t go on at all when you signal
a turn, check the fuse, see
Fuses and Circuit Breakers
on page 5-95
and for burned-out bulbs.
Turn Signal On Chime
If the turn signal is left on for about 1 mile (1.6 km),
a chime will sound to let you know you left the
turn signal on.
Headlamp High/Low-Beam Changer
To change the headlamps from low beam to high or high
beam to low, push the turn signal lever away from
you. Then release it.
When the high beams
are on, this light on the
instrument panel cluster
will also be on.
Flash-to-Pass
This feature lets you use your high-beam headlamps to
signal a driver in front of you that you want to pass.
To use it, pull the turn signal/multifunction lever toward
you until the high-beam headlamps come on, then
release the lever to turn them off.
3-9
Certain electrical accessories may not be compatible
with the accessory power outlet and could result
in blown vehicle or adapter fuses. If you experience a
problem, see your dealer for additional information
on the accessory power outlet.
Notice:
Adding any electrical equipment to your
vehicle may damage it or keep other components
from working as they should. The repairs would not
be covered by your warranty. Check with your
dealer before adding electrical equipment.
When adding electrical equipment, be sure to follow the
installation instructions included with the equipment.
Notice:
Improper use of the power outlet can cause
damage not covered by your warranty. Do not
hang any type of accessory or accessory bracket
from the plug because the power outlets are
designed for accessory power plugs only.
Ashtrays and Cigarette Lighter
Your vehicle may have an ashtray and cigarette lighter.
To use the lighter, just push it in all the way and let
go. When it’s ready, it will pop back out by itself.
Notice:
Holding a cigarette lighter in while it is
heating will not allow the lighter to back away from
the heating element when it is hot. Damage from
overheating may occur to the lighter or heating
element, or a fuse could be blown. Do not hold a
cigarette lighter in while it is heating.
To remove the ashtray, lift it straight up. To reinstall it,
press the ashtray down firmly until it is fully seated.
Notice:
If you put papers or other flammable items
in the ashtray, hot cigarettes or other smoking
materials could ignite them and possibly damage
your vehicle. Never put flammable items in the
ashtray.
3-19
Oil Pressure Light
If you have a low engine
oil pressure problem, this
light will stay on after
you start your engine,
or come on when you are
driving. This indicates
that your engine is
not receiving enough oil.
The engine could be low on oil, or could have some
other oil problem. Have it fixed immediately.
The oil light may also come on when the ignition is on
but the engine is not running, the light will come on as a
test to show you it is working, but the light will go out
when you turn the ignition to START. If it doesn’t come
on with the ignition on, you may have a problem with
the fuse or bulb. Have it fixed right away.
{
CAUTION:
Do not keep driving if the oil pressure is low.
If you do, your engine can become so hot that
it catches fire. You or others could be burned.
Check your oil as soon as possible and have
your vehicle serviced.
Notice:
Lack of proper engine oil maintenance
may damage the engine. The repairs would not be
covered by your warranty. Always follow the
maintenance schedule in this manual for changing
engine oil.
3-39
Finding a Station
AM FM:
Press this button to switch between FM1,
FM2, or AM. The display will show the selection.
R
TUNE
Q
:
Press either arrow to select radio
stations.
R
SEEK
Q
:
Press the up or down arrow to go to the
next or to the previous station and stay there.
The radio will only seek stations with a strong signal
that are in the selected band.
SCN (Scan):
Press this button to scan stations.
The radio will go to a station, play for a few seconds,
then go on to the next station. Press this button again to
stop scanning.
The radio will only scan stations with a strong signal
that are in the selected band.
Setting Preset Stations
Up to 18 stations (six FM1, six FM2, and six AM) can
be programmed on the six numbered pushbuttons,
by performing the following steps:
1. Turn the radio on.
2. Press AM FM to select FM1, FM2, or AM.
3. Tune in the desired station.
4. Press and hold one of the six numbered
pushbuttons until you hear a beep. Whenever that
numbered pushbutton is pressed, the station
that was set will return.
5. Repeat the steps for each pushbutton.
If the battery has been disconnected or a radio fuse has
been removed, the preset stations and time of day
will need to be reset.
3-48
Setting Preset Stations
The six numbered pushbuttons let you return to your
favorite stations. You can set up to 18 stations
(six FM1, six FM2, and six AM) by performing the
following steps:
1. Turn the radio on.
2. Press AM FM to select FM1, FM2, or AM.
3. Tune in the desired station.
4. Press and hold one of the six numbered
pushbuttons until you hear a beep. Whenever you
press that numbered pushbutton, the station
you set will return.
5. Repeat the steps for each pushbutton.
If the battery has been disconnected or a radio fuse has
been removed, the preset stations and time of day
will need to be reset.
Using Automatic Set
Use this feature to automatically save the radio preset
pushbuttons with the stations with the strongest
radio signals.
A.SET (Automatic Set):
Press this button to have the
radio automatically select the first 12 strongest radio
stations for FM and the six strongest radio stations
for AM.
To select the stations, perform the following:
1. Press AM FM to select FM1, FM2, or AM.
2. Press and hold AM FM until you hear a beep.
The radio will begin to search the current band.
The radio will store the stations, starting from the
lowest frequency, to each preset pushbutton.
A.SET will appear on the display when the radio is
finished storing the stations.
Cancelling Automatic Set
The radio retains the previously stored stations so they
can be recalled when automatic set is canceled.
Press and hold A.SET until you hear a beep. A.SET will
no longer appear on the display.
3-51
Setting Preset Stations
The six numbered pushbuttons let you return to your
favorite stations. You can set up to 30 stations
(six FM1, six FM2, and six AM, six XM1 and six XM2
(48 contiguous US states, if equipped) by performing the
following steps:
1. Turn the radio on.
2. Press AM FM to select FM1, FM2, or AM.
Press the AUX button to select XM1 or XM2.
3. Tune in the desired station.
4. Press the right or left AUTO EQ button to select the
equalization.
5. Press and hold one of the six numbered
pushbuttons. Preset X Stored will appear on the
display and you will hear a beep. Whenever you
press that numbered pushbutton, the station you set
will return and the equalization that you selected will
be automatically stored for that pushbutton. If the
equalization of a preset is changed while listening to
that station, the radio will automatically save the new
equalization.
6. Repeat the steps for each pushbutton.
If the battery has been disconnected or a radio fuse has
been removed, the preset stations and time of day
may need to be reset.
Using Automatic Set
Use this feature to automatically save the radio preset
pushbuttons with the stations with the strongest
radio signals.
A.SET (Automatic Set):
Press and hold this button to
have the radio automatically select the first 12 strongest
radio stations for FM and the six strongest radio stations
for AM.
To select the stations, perform the following:
1. Press AM FM to select FM1, FM2, or AM.
2. Press and hold AM FM until you hear a beep.
The radio will begin to search the current band.
The radio will store the stations, starting from
the lowest frequency, to each preset pushbutton.
A.SET will appear on the display when the radio is
finished storing the stations.
Cancelling Automatic Set
The radio retains the previously stored stations so they
can be recalled when automatic set is canceled.
Press and hold AM FM until you hear a beep. A.SET
will no longer appear on the display.
3-57
Dinghy Towing (Manual Transaxle)
To tow your vehicle from the front with all four wheels
on the ground, do the following:
1. Set the parking brake.
2. Turn the ignition key to ACC.
3. Shift your transaxle to NEUTRAL.
4. Locate and remove the IP BATT2 fuse from the
engine compartment fuse block.
5. Release the parking brake.
Once you have reached your destination, be sure to
replace the IP BATT2 fuse to its original location in the
engine compartment fuse block.
Notice:
Too much or too little fluid can damage the
transaxle. Be sure that the transaxle fluid is at the
proper level before towing with all four wheels
on the ground.
Notice:
Don’t tow a vehicle with the front drive
wheels on the ground if one of the front tires is a
compact spare tire. Towing with two different
tire sizes on the front of the vehicle can cause
severe damage to the transaxle.
4-32
A. Engine Air Cleaner/Filter. See
Engine Air
Cleaner/Filter on page 5-22
.
B. Engine Oil Fill Location. See
Engine Oil on
page 5-15
.
C. Engine Oil Dipstick Location. See
Engine Oil on
page 5-15
.
D. Brake Master Cylinder. See
Brakes on page 5-38
and
Hydraulic Clutch on page 5-25
.
E. Remote Positive Terminal Location. See
Jump
Starting on page 5-42
.
F. Engine Compartment Fuse Block. See
Fuses and
Circuit Breakers on page 5-95
.
G. Surge Tank. See
Engine Coolant on page 5-26
.
H. Windshield Washer Fluid Reservoir. See
Windshield
Washer Fluid on page 5-37
.
Before closing the hood, be sure all filler caps are on
properly.
5-13
A. Engine Oil Dipstick Location. See
Engine Oil on
page 5-15
.
B. Electric Cooling Fan. See
Cooling System on
page 5-32.
C. Engine Oil Fill Location. See
Engine Oil on
page 5-15
.
D. Radiator Pressure Cap. See
Engine Coolant on
page 5-26.
E. Brake Master Cylinder. See
Brakes on page 5-38
and
Hydraulic Clutch on page 5-25
.
F. Engine Air Cleaner/Filter. See
Engine Air
Cleaner/Filter on page 5-22
.
G. Engine Compartment Fuse Block. See
Fuses and
Circuit Breakers on page 5-95
.
H. Remote Positive Terminal Location. See
Jump
Starting on page 5-42
.
I. Surge Tank. See
Coolant Surge Tank Pressure Cap
on page 5-29
.
J. Windshield Washer Fluid Reservoir. See
Windshield
Washer Fluid on page 5-37
.
Before closing the hood, be sure all filler caps are on
properly.
Engine Oil
Checking Engine Oil
It is a good idea to check your engine oil every time you
get fuel. In order to get an accurate reading, the oil
must be warm and the vehicle must be on level ground.
The engine oil dipstick handle is a yellow loop. See
Engine Compartment Overview on page 5-12
for
the location of the engine oil dipstick.
Turn off the engine and give the oil several minutes to
drain back into the oil pan. If you don’t, the oil
dipstick might not show the actual level.
Pull out the dipstick and clean it with a paper towel or
cloth, then push it back in all the way. Remove it again,
keeping the tip down, and check the level.
5-15
Instrument Panel Fuse Block
Some fuses are in a fuse block on the driver’s side of
the vehicle, near the driver’s right leg. Loosen the screw
on the cover and remove the cover.
Fuses
Usage
AIR BAG
Air bags, Sensing and Diagnostic
Module (SDM)
ACCOMMO-
DATION
INTERFACE/
ONSTAR
Entertainment, Mobile
Communications, OnStar
CRUISE
Cruise Control Module, Clutch Start
Switch
EPS/CRUISE
Cruise Control Switches, EPS Unit
5-96
Fuses
Usage
FUEL PUMP
Fuel Pump Relay
HVAC
Climate Control
CLUSTER
Instrument Panel Cluster
LIGHTER
Cigar Lighter
RADIO
(BATT1)
Radio Receiver, Entertainment
Memory
RADIO (ACC)
Radio Receiver, Entertainment
SUNROOF
Power Sunroof, OnStar Mirror
WIPER SW
Windshield Wipers and Washers,
Transaxle Shift Lock Control Switch
DASH
Instrument Panel, Dimming Switch
IGN SW
Ignition Switch
PARK
Headlamp Switch
PWR OUTLET
Auxiliary Power Outlet
Fuses
Usage
PWR
WINDOWS
Power Window Switches
STOP
Stoplamp (Brake) Switch
BCM ELECT
Ignition Switch, Body Control
Module (BCM)
BMC (PWR)
Entry Control, Trunk Release
Relay
Usage
RUN
Climate Control (HVAC Blower,
Control Heads)
ACC
Power Windows, Sunroof, Radio,
Wiper/Washer Switch, Accessory
Power Outlet
FUEL PUMP
Fuel Pump
ALC/PARK
OnStar, Radio, Instrument Panel
Cluster, Body Control Module
(Entry Control), Cigar Lighter,
Headlamp Switch, License Lamp
5-97
Fuses
Usage
18 HDLP-LH
Driver’s Side Headlamp
19 WIPER
Wiper Mini Relay
20 HORN
Horn Micro Relay
21 PREM AUDIO
Entertainment, Premium Radio
Amplifier
22 ABS
Anti-Lock Brake System,
Traction Control Module
23 RR DEFOG
Rear Defog Mini Relay
38 RUN/CRANK
Ignition 1 Mini Relay
39 IP BATT1
Body Control Module
40 ABS
Anti-Lock Brake System,
Traction Control Module
41 IP BATT2
Body Control Module
42 EPS2
Electric Power Steering
43 EPS1
Electric Power Steering
45 COOLING
FAN
Cooling Fan Mini Relay
46 CRANK
Powertrain Control Module
Mini Relay
Fuses
Usage
47 IP BATT 1A
Body Control Module
48 RUN (IGN 3)
Body Control Module
Relays
Usage
24 A/C
Air Conditioning Clutch
25 HORN
Horn
26 FOG LAMP
Fog Lamps
28 RUN/CRANK
Body Control Module
30 COOLING
FAN
Engine Cooling Fan
31 PCM CONT
ECM
32 WIPER1
Wiper System
33 WIPER2
Wiper System
34 REAR DEFOG
Rear Window Defroster
Diodes
Usage
35 A/C
Air Conditioning Diode
37 WIPER
Wiper Diode
5-99
Fuses
Usage
22 ABS
Anti-Lock Brake System
23 RR DEFOG
Rear Defog Mini Relay
38 RUN/CRANK
Ignition 1 Mini Relay
39 IP BATT1
Body Control Module
40 ABS
Anti-Lock Brake System
41 IP BATT2
Body Control Module
43 EPS
Electric Power Steering
44 COOLING
FAN 2
Cooling Fan Mini Relay
45 COOLING
FAN 1
Cooling Fan Mini Relay
46 CRANK
Crank
47 IP BATT 1A
Body Control Module
48 RUN (IGN 3)
Body Control Module
Relays
Usage
24 A/C CLUTCH
Air Conditioning Clutch
25 HORN
Horn
27 AFTER
COOLER PUMP
After Cooler Pump
28 RUN/CRANK
Body Control Module
29 POWERTRAIN
Powertrain
30 COOLING
FAN 1
Engine Cooling Fan
31 ECM CONT
Starter Solenoid
32 WIPER1
Wiper System
33 WIPER2
Wiper System
34 REAR DEFOG
Rear Window Defroster
Diodes
Usage
35 A/C
Air Conditioning Diode
37 WIPER
Wiper Diode
5-101