Pontiac Aztek - 2002 Fuse Box Diagram

Pontiac Aztek - 2002 Fuse Box Diagram

2-26
If the engine still does not start, and the key appears to
be undamaged, try another ignition key. At this time,
you may also want to check the fuse (see “Fuses and
Circuit Breakers” in the Index). If the engine still does
not start with the other key, your vehicle needs service.
If your vehicle does start, the first key may be faulty.
See your dealer who can service the PASS
-
Key III to
have a new key made.
It is possible for the PASS
-
Key III decoder to learn the
transponder value of a new or replacement key. Up to
10 total keys may be programmed for the vehicle. This
procedure is for learning additional keys only. If all the
currently programmed keys are lost or do not operate,
you must see your dealer or a locksmith who can service
PASS
-
Key III to have keys made and programmed to
the system.
See your dealer who can service PASS
-
Key III to get a
new key blank that is a cut exactly as the ignition key
that operates the system.
Canadian Owners:
If you lose or damage your keys,
only a GM dealer can service PASS
-
Key III to have new
keys made. To program additional keys you will need
two current driver’s keys (black in color). You must add
a step to the following procedure. After Step 3 repeat
Steps 1 through 3 with the second current driver’s key.
Then continue with Step 4.
To program the new PK3 key do the following:
1.
Verify the new key has “PK3” stamped on it.
2.
Insert the current driver’s key in the ignition and
start the engine. If the engine will not start, see your
dealer for service.
3.
After the engine has started, turn the key to OFF, and
remove the key.
4.
Insert the key to be programmed and turn it to ON
within 10 seconds of removing the previous key.
2-45
If a bulb is burned out, replace it to help avoid an
accident. If the arrows don’t go on at all when you
signal a turn, check for burned
-
out bulbs and check the
fuse. See “Fuses and Circuit Breakers” in the Index.
If you have a trailer towing option with added wiring for
the trailer lamps, the signal indicator will flash at a
normal rate even if a turn signal bulb is burned out.
Check the front and rear turn signal lamps regularly to
make sure they are working.
Turn Signal On Chime
If either turn signal is left on for more than 3/4 mile
(1.2 km), a chime will sound to let the driver know to
turn it off.
If you need to leave the signal on for more than 3/4 mile
(1.2 km), turn off the signal and then turn it back on.
Headlamp High/Low-Beam Changer
To change the headlamps from low to high, simply press
the turn signal lever away from you. Then release it. To
change the headlamps from high to low, pull the lever
toward you.
When the high beams
are on, this light, on the
instrument panel cluster
and the optional HUD
display, will also be on.
Flash-to-Pass Feature
When the headlamps are off, pull the lever toward you
to momentarily switch on the high beams (to signal that
you are going to pass). When you release the lever, they
will turn off.
2-74
If the air inflator system does not turn on, the fuse may
be blown or installed incorrectly. See “Fuses and Circuit
Breakers” in the Index or see your dealer for service.
Your air inflator will automatically shut off after about
10 minutes. To reset, press the ON switch again.
Don’t run your air inflator for longer than 30 minutes at
one time. If you do, you may damage the system. After
30 minutes, wait at least 10 minutes before restarting the
air inflator.
To turn off the inflator, press OFF and detach the hose
from the inflated object first, then from the outlet.
Replace the protective cap. Place the inflator kit tools in
the pouch, and store in the glove box.
Accessory Power Outlets
With accessory power outlets you can plug in auxiliary
electrical equipment such as a cellular telephone or
CB radio.
There is a single front power outlet located on the floor
console above the vents.
There are two rear power outlets. One is located in the
rear of the floor console below the vents. The other is
located in the rear of the vehicle on the driver’s side.
To use an outlet, pull the cover down. When not in use,
cover the outlet with the protective cap.
NOTICE:
When using the accessory power outlets:
D
Maximum load of any electrical equipment
should not exceed 20 amps.
D
Be sure to turn off any electrical equipment
when not in use. Leaving electrical
equipment on for extended periods can
drain the battery.
Certain electrical accessories may not be compatible
with the accessory power outlet and could result in
blown vehicle or adapter fuses. If you experience a
problem see your dealer for additional information on
accessory power outlets.
2-81
The main components of the instrument panel are the following:
A.
Side Vents
B.
Instrument Panel Cluster
C.
Hazard Warning Flasher Button
D. Head
-
Up Display Controls and Driver Information
Center (DIC) Controls (If Equipped) or DIC
Controls (If Equipped)
E.
Center Vents
F.
Audio System
G.
Side Vents
H.
Turn Signal/Multifunction Lever
I.
Exterior and Interior Lamp Controls
J.
Audio Steering Wheel Controls (If Equipped)
K.
Hood Release
L.
Parking Brake
M. Horn
N.
Ignition Switch
O.
Audio Steering Wheel Controls (If Equipped)
P.
Shift Lever
Q.
Accessory Power Outlets
R.
Rear Vents
S. Console/Cooler
T.
Instrument Panel Fuse Block
U.
Cupholders and Ashtray
V.
Instrument Panel Switchbank
W. Cigarette Lighter
X.
Comfort Controls
Y.
Glove Box
2-118
If the sun comes out or it becomes cloudy, you may need
to adjust the HUD brightness again using the dimmer
knob. Polarized sunglasses could make the HUD image
harder to see.
Clean the inside of the windshield as needed to remove
any dirt or film that reduces the sharpness or clarity of
the HUD image.
To clean the HUD, spray household glass cleaner on a
soft, clean cloth. Wipe the HUD lens gently, then dry it.
Do not spray cleaner directly on the lens because the
cleaner could leak into the unit.
If the ignition is on and you can’t see the HUD image,
check to see if one of the following has occurred:
D
The HUD unit is covered by something.
D
The HUD dimmer knob is not adjusted properly.
D
The HUD image is not adjusted to the proper height.
D
The ambient light (in the direction your vehicle is
facing) is low.
D
The fuse is blown. See “Fuses and Circuit Breakers”
in the Index.
Keep in mind that your windshield is part of the HUD
system. If you ever have to have your windshield
replaced, be sure to get one that is designed for HUD or
your HUD image may look blurred and out of focus.
5-4
2.
Get the vehicles close enough so the jumper cables
can reach, but be sure the vehicles aren’t touching
each other. If they are, it could cause a ground
connection you don’t want. You wouldn’t be able to
start your vehicle, and the bad grounding could
damage the electrical systems.
To avoid the possibility of the vehicles rolling, set
the parking brake firmly on both vehicles involved in
the jump start procedure. Put an automatic transaxle
in PARK (P) or a manual transaxle in NEUTRAL
before setting the parking brake.
NOTICE:
If you leave your radio on, it could be badly
damaged. The repairs wouldn’t be covered by
your warranty.
3.
Turn off the ignition on both vehicles. Unplug
unnecessary accessories plugged into the cigarette
lighter or in the accessory power outlet(s). Turn off
the radios and all lamps that aren’t needed. This will
avoid sparks and help save both batteries. And it
could save your radio!
4.
Open the hood and locate the batteries. Find the
positive (+) and negative (
-
) terminal locations on
each vehicle.
You will not need to access your battery for jump
starting. Your vehicle has a remote positive (+) jump
starting terminal for that purpose. The terminal is
located under a tethered cap at the front of the
underhood fuse block. See “Engine Compartment
Overview” in the Index for more information on
location.
Flip the cap up to access the remote positive (+)
terminal. You should always use the remote
positive (+) terminal instead of the positive (+)
terminal on the battery.
CAUTION:
An electric fan can start up even when the engine
is not running and can injure you. Keep hands,
clothing and tools away from any underhood
electric fan.
6-10
Engine Compartment Overview
When you lift the hood, you’ll see these items:
A.
Underhood Fuse Block
B.
Remote Positive (+) Terminal
C.
Power Steering Fluid Reservoir
D.
Automatic Transaxle
Fluid Dipstick
E.
Brake Master Cylinder
F.
Windshield Washer
Fluid Reservoir
G. Battery
H.
Radiator Pressure Cap
I.
Engine Oil Fill Cap
J.
Engine Oil Dipstick
K.
Engine Air Cleaner/Filter
L.
Engine Coolant Reservoir
6-61
Electrical System
Add-On Electrical Equipment
NOTICE:
Don’t add anything electrical to your vehicle
unless you check with your dealer first. Some
electrical equipment can damage your vehicle
and the damage wouldn’t be covered by your
warranty. Some add
-
on electrical equipment can
keep other components from working as they
should.
Your vehicle has an air bag system. Before attempting to
add anything electrical to your vehicle, see “Servicing
Your Air Bag
-
Equipped Vehicle” in the Index.
Headlamp Wiring
The headlamp wiring is protected by different fuses
located in the underhood fuse block. An electrical
overload may cause the lamps to go off and remain that
way. If this happens, replace the right fuse with one of
the same kind and correct amperage.
Windshield Wipers
The windshield wiper motor is protected by an internal
circuit breaker and a fuse. If the motor overheats due to
heavy snow, etc., the wiper will stop until the motor
cools. If the overload is caused by some electrical
problem, be sure to get it fixed.
Power Windows and Other Power Options
Circuit breakers in the floor console fuse block protect
the power windows and other power accessories. When
the current load is too heavy, the circuit breaker opens
and closes, protecting the circuit until the problem
is fixed.
6-62
Fuses and Circuit Breakers
The wiring circuits in your vehicle are protected from
short circuits by a combination of fuses, circuit breakers
and fusible thermal links.
Look at the silver
-
colored band inside the fuse. If the
band is broken or melted, replace the fuse. Be sure you
replace a bad fuse with a new one of the identical size
and rating.
If you ever have a problem on the road and don’t have a
spare fuse, you can borrow one that has the same
amperage or use one of the spare fuses in the underhood
fuse and relay center. Just pick some feature of your
vehicle that you can get along without
--
like the radio
or cigarette lighter
--
and use its fuse, if it is the right
amperage. Replace it as soon as you can.
There are two fuse blocks in your vehicle: the floor
console fuse block and the underhood fuse block.
Floor Console Fuse Block
The floor console fuse
block is located to the right
of the shift lever.
The fuses marked spare are available if a replacement
fuse is needed.
Pull the door open to access the fuse block.
6-63
Fuses
Usage
1
Fuse Puller
2
Steering Wheel Radio Controls
3
Power Door Locks
4
Spare
5
Spare
6
Spare
Fuses
Usage
7
Spare
8
Spare
9
Spare
10
Turn Signal and Hazard
Lamp Flashers
11
Power Seats
12
Electronic Level Control (ELC)
Compressor
13
Liftglass and Endgate
14
Rear Auxiliary Power Outlet
15
ELC Compressor Relay and
Height Sensor
16
Heated Mirrors
17
Power Mirrors
18
Ignition 1 Module
19
Turn Signal Switch and
NSBU Switch
6-64
Fuses
Usage
21
Rear Defogger
22
Air Bag Module
24
Canister Vent Solenoid and
TCC Switch
25
HVAC Blower Motor
26
HVAC Mode and Temperature
Motors and Head
-
Up Display
28
Not Used
29
Windshield Wipers and Washer
30
Instrument Panel Cluster, BCM,
PASS
-
Key
R
III
31
Park Lock Ignition Key Solenoid
32
Not Used
34
Power Sunroof
35
Power Windows
36
Map Lamps, Courtesy Lamps and
Instrument Panel Lights
Fuses
Usage
37
Radio
38
UQ3 Radio Amplifier
39
Head
-
Up Display
40
Hazard Flashers
41
Instrument Panel Cluster, HVAC
Control, Security LED and
Remote Keyless Entry Module
42
PASS
-
Key
R
III
44
Body Control Module (BCM)
Relays
Usage
20
Rear Defogger Relay
23
IGN3 Relay
27
Accessory Relay
33
Retained Accessory Power Relay
Diode
43
Accessory Diode
6-65
Underhood Fuse Block
This fuse block is located in the engine compartment, to
the rear of the windshield washer fluid reservoir.
See “Engine Compartment Overview” in the Index for
more information on location.
The fuses marked spare are available if a replacement
fuse is needed.
To remove the cover, press the two tabs in and lift up
the cover.
Mini Fuses
Usage
1
Fuel Pump
2
Air Conditioning
Compressor Clutch
3
Horn
4
Engine Controls
-
Emissions
and Sensors
5
Power Control Module
(PCM)
-
Battery Power
6-66
Mini Fuses
Usage
6
Anti
-
Lock Brakes (ABS)
Control Module
7
Transaxle Solenoids
8
Spare
9
ABS Solenoid Valves
10
Oxygen Sensors
-
Emissions
Control
11
Injectors
12
Spare
13
Engine Controls
14
Daytime Running Lamps (DRL)
15
Passenger’s Low
-
Beam Headlamp
16
Spare
17
Driver’s Low
-
Beam Headlamp
18
Driver’s High
-
Beam Headlamp
19
Ignition Switch Battery Power
20
Parking Lamps
-
Front and Rear
Mini Fuses
Usage
21
Air Pump
-
Emissions Controls
22
Spare
23
Passenger’s High
-
Beam Headlamp
24
Spare
25
Spare
26
Front Fog Lamps
27
Ignition Relay, Neutral Start
Switch, Powertrain Control
Module (PCM)
28
Battery Control Module
-
Battery
Power
29
Spare
30
All
-
Wheel Drive (AWD) Module
31
Cruise Control
32
Front Power Outlets, Cigar
Lighter, OnStar
R
33
Automatic Transaxle Shift Lock
Control System
34
Spare
6-67
J
-
Style Fuse
Usage
35
Starter Solenoid Battery Fuse
36
ABS Motor
37
Spare
38
Spare
39
Engine Cooling Fan
40
Engine Cooling Fan
41
Main Battery Fuse for Retained
Accessory Power Relay and
Accessory Relay
42
Main Battery Fuse for Heated
Seats, Air
43
Spare
44
Spare
45
Main Battery Fuse for Power
Outlets, Level Control,
Power Seats and Mirrors and
Body Computer
46
Spare
J
-
Style Fuse
Usage
47
Main Battery Fuse for HVAC
Blower and Ignition 3 relay
48
Main Battery fuse for Ignition
Switch, Radio, Heads
-
Up Display,
Remote Keyless Entry, Instrument
Cluster, Air Conditioning and
Body Computer
Maxi Breaker
Usage
49
Spare
Micro Relay
Usage
50
Horn
51
Fuel Pump
52
Air Conditioning Clutch
53
Daytime Running Lamps (DRL)
54
Low
-
Beam Headlamps
55
Parking Lamps
56
High
-
Beam Headlamps
57
Fog Lamps
6-68
Mini Relay
Usage
58
Starter Relay
59
Cooling Fan
60
Ignition 1 Relay
61
Cooling Fan
62
Cooling Fan
63
Air Pump
Spare Fuses
Usage
64
Spare
65
Spare
66
Spare
67
Spare
68
Spare
69
Spare
Fuse Puller
70
Fuse Puller
Diode
Diode for Air Conditioning
Compressor Clutch