Oldsmobile Aurora - 2002 Fuse Box Diagram

Oldsmobile Aurora - 2002 Fuse Box Diagram

2-19
Here’s how to avoid setting off the alarm by accident:
D
If you don’t want to activate the theft
-
deterrent
system, lock the door either using a key or the
manual door lock switch.
D
Always unlock a door with a key, or use the remote
keyless entry system. Unlocking a door any other
way will set off the alarm.
If you set off the alarm by accident, unlock the driver’s
door with your key.
You can also turn off the alarm by pressing the
unlock symbol on the remote keyless entry transmitter.
The alarm won’t stop if you try to unlock a door
any other way.
Testing the Alarm
The alarm can be tested by following these steps:
1.
From inside the vehicle, roll down the driver’s
window and open the driver’s door.
2.
Activate the system by locking the doors with the
power door lock switch while the door is open,
or with the remote keyless entry transmitter.
3.
Get out of the car, close the door and wait for
the SECURITY light to go out.
4.
Then reach in through the window, unlock the
door with the manual door lock and open the door.
This should set off the alarm.
If the alarm does not sound when it should, but the
vehicle’s lamps flash, check to see if the horn works.
The horn fuse may be blown. See “Fuses and Circuit
Breakers” in the Index.
If the alarm does not sound, or the vehicle’s lamps
do not flash, the vehicle should be serviced by an
authorized service center.
2-21
If the engine still does not start, and the key appears
to be undamaged, try another ignition key. At this time,
you may also want to check the fuse (see “Fuses and
Circuit Breakers” in the Index). If the engine still does
not start with the other key, your vehicle needs service.
If your vehicle does start, the first key may be faulty.
See your dealer who can service the PASS
-
Key III to
have a new key made.
It is possible for the PASS
-
Key III decoder to learn
the transponder value of a new or replacement key.
Up to 10 keys may be programmed for the vehicle.
This procedure is for learning additional keys only.
Canadian Owners:
If you lose or damage your keys,
only a GM dealer can service PASS
-
Key III to have new
keys made. To program additional keys you will require
two current driver’s keys. You must add a step to the
following procedure. After Step 2 repeat Steps 1 and 2
with the second current driver’s key. Then continue
with Step 3.
To program the new key, do the following:
1.
Verify that the new key has “PK3” stamped on it.
2.
Insert the current driver’s key in the ignition and
start the engine. If the engine will not start, see your
dealer for service.
3.
After the engine has started, turn the key to OFF,
and remove the key.
4.
Insert the key to be programmed and turn it to ON
within 10 seconds of removing the previous key.
5.
The SECURITY telltale light will turn off once the
key has been programmed. It may not be apparent
that the SECURITY light went on due to how
quickly the key is programmed.
6.
Repeat Steps 1 through 4 if additional keys are to
be programmed.
If you are ever driving and the SECURITY light comes on
and stays on, you will be able to restart your engine
if you turn it off. Your PASS
-
Key III system, however, is
not working properly and must be serviced by your dealer.
Your vehicle is not protected by the PASS
-
Key III system
at this time.
If you lose or damage a PASS
-
Key III key, see your
dealer to have a new key made.
2-36
As you signal a turn or a lane change, if the arrows flash
very fast, a bulb may be burned out and other drivers
won’t see your turn signal.
If a bulb is burned out, replace it to help avoid
an accident.
If the arrows don’t go on at all when you signal a turn,
check the fuse (see “Fuses and Circuit Breakers” in
the Index) and check for burned
-
out bulbs.
Turn Signal On Chime
If your turn signal is left on for more than 0.8 miles
(1.3 km), a chime will sound at each flash of the turn
signal and the DIC will display the TURN SIGNAL
ON? reminder message. To turn off the chime and
message, move the turn signal lever to the off position.
To turn off the DIC message while the turn signal is
still active, press any button on the DIC. See
“Driver Information Center (DIC)” in the
Index for more information.
Headlamp High/Low-Beam Changer
To change the headlamps from low beam to high, push
the lever away from you until you hear a click. Then
release it.
When the high beams
are on, this light on the
instrument panel cluster
will also be on.
If the fog lamps are on when you turn on the
high
-
beam headlamps, the fog lamps will turn off.
The fog lamps will turn back on when you turn
off the high
-
beam headlamps.
2-56
Ashtrays and Cigarette Lighter
Push and release the cover to reveal the front ashtray
and cigarette lighter.
NOTICE:
Don’t put papers and other things that burn
into your ashtrays. If you do, cigarettes or
other smoking materials could set them on
fire, causing damage.
To clean an ashtray, make sure the cover is open fully,
then lift out the ashtray by pulling on the snuffer.
To use a lighter, push the center all the way in and let it
go. When it’s ready, the center will pop back out by
itself. Pull out the entire unit to use it.
NOTICE:
Don’t hold a cigarette lighter in with your hand
while it is heating. If you do, it won’t be able to
back away from the heating element when it’s
ready. That can make it overheat, damaging the
lighter and the heating element.
The cigarette lighter will only operate when the ignition
is in ON and for 10 minutes after turning the ignition
off. If you would like the lighter to operate regardless
of the ignition position, and for extended periods of
time, see “Engine Compartment Fuse Block” in the
Index or see your dealer.
Leaving an accessory on for a long period of time can
drain the vehicle’s battery.
2-57
Sun Visors
To block out glare, you can swing down the visors. You
can also remove them from the center mount and swing
them to the side, while the auxiliary visor remains to
block glare from the front.
To extend the visor at the sides, pull out the extension.
Illuminated Visor Vanity Mirrors
When you open the cover to the driver’s or passenger’s
side visor vanity mirror, the lamps will come on.
Accessory Power Outlet
With accessory power outlets you can plug in auxiliary
electrical equipment such as a cellular telephone or
CB radio.
The accessory power outlet (12
-
volt) is located on the
front passenger’s side of the vehicle, near the floor on
the console.
Your vehicle may have a small cap that must be pulled
down to access the accessory power outlet. If it does,
when not using the outlet be sure to cover it with the
protective cap.
The accessory power outlet will only operate when the
ignition is in ON and for 10 minutes after turning the
ignition off. If you would like the accessory power
outlet to operate regardless of ignition position, and for
extended periods of time, see “Engine Compartment
Fuse Block” in the Index or contact your dealer.
NOTICE:
When using accessory power outlets:
D
Maximum load of any electrical equipment
should not exceed 15 amps.
D
Be sure to turn off any electrical equipment
when not in use. Leaving electrical
equipment on for extended periods can
drain the battery.
Certain electrical accessories may not be compatible
with the accessory power outlet and could result in
blown vehicle or adapter fuses. If you experience a
problem, see your dealer for additional information
on accessory power outlets.
2-81
Oil Pressure Light
If you have a problem with
your oil, this light may stay
on after you start your
engine, or come on when
you are driving.
A warning chime and the DIC message LOW OIL
PRESSURE may also come on.
These indicate that oil is not going through your engine
quickly enough to keep it cool. The engine could be low
on oil, or could have some other oil problem. Have it
fixed right away.
The oil light could also come on briefly when the
ignition is on but the engine is not running. The light
will come on as a test to show you it is working, but the
light will go out about five seconds after you turn the
ignition to START. If it doesn’t come on with the
ignition on, you may have a problem with the fuse or
bulb. Have it fixed right away.
CAUTION:
Don’t keep driving if the oil pressure is low. If
you do, your engine can become so hot that it
catches fire. You or others could be burned.
Check your oil as soon as possible and have
your vehicle serviced.
NOTICE:
Damage to your engine from neglected oil
problems can be costly and is not covered by
your warranty.
6-13
A.
Engine Compartment Fuse Block
B.
Windshield Washer Fluid Reservoir
C.
Engine Coolant Surge Tank
D.
Remote Positive (+) Terminal
E.
Heavy, Unpainted Metal Engine Part
F.
Passenger Compartment Air Filter
G.
Power Steering Fluid Reservoir
H.
Engine Oil Fill Cap
I.
Engine Oil Dipstick
J.
Automatic Transaxle Fluid Dipstick
K.
Brake Fluid Reservoir
L.
Engine Air Cleaner/Filter
6-15
A.
Engine Compartment Fuse Block
B.
Windshield Washer Fluid Reservoir
C.
Engine Coolant Surge Tank
D.
Remote Positive (+) Battery Terminal
E.
Power Steering Fluid Reservoir
F.
Passenger Compartment Air Filter
G.
Remote Negative (
-
) Terminal
H.
Engine Oil Fill Cap
I.
Engine Oil Dipstick
J.
Brake Fluid Reservoir
K.
Automatic Transaxle Fluid Dipstick
(near the air cleaner)
L.
Engine Air Cleaner/Filter
Engine Oil
If the CHECK OIL LEVEL message appears on the
instrument cluster, it means you need to check your
engine oil level right away. For more information, see
“DIC Warnings and Messages” in the Index.
You should check your engine oil level regularly; this is
an added reminder.
6-68
Electrical System
Add-On Electrical Equipment
NOTICE:
Don’t add anything electrical to your vehicle
unless you check with your dealer first. Some
electrical equipment can damage your vehicle
and the damage wouldn’t be covered by your
warranty. Some add
-
on electrical equipment
can keep other components from working as
they should.
Your vehicle has an air bag system. Before attempting to
add anything electrical to your vehicle, see “Servicing
Your Air Bag
-
Equipped Vehicle” in the Index.
Headlamp Wiring
The headlamp wiring is protected by a circuit breaker in
the wiring harness. An electrical overload will cause the
lamps to go on and off, or in some cases to remain off.
If this happens, have your headlamp system checked
right away.
Windshield Wiper Fuses
The windshield wiper motor is protected by an internal
circuit breaker and a fuse. If the motor overheats due to
heavy snow, etc., the wiper will stop until the motor
cools. If the overload is caused by some electrical
problem, have it fixed.
Power Windows and Other Power Options
Circuit breakers in the fuse panel protect the power
windows and other power accessories. When the current
load is too heavy, the circuit breaker opens and closes,
protecting the circuit until the problem is fixed.
6-69
Fuses and Circuit Breakers
The wiring circuits in your vehicle are protected from
short circuits by a combination of fuses and circuit
breakers. This greatly reduces the chance of fires caused
by electrical problems.
Look at the silver
-
colored band inside the fuse. If the
band is broken or melted, replace the fuse. Be sure you
replace a bad fuse with a new one of the identical size
and rating. If a MaxiFuse
R
should blow, see your dealer
for service immediately.
If you ever have a problem on the road and don’t have a
spare fuse, you can “borrow” one that has the same
amperage. Pick some feature of your vehicle that you
can get along without
--
like the radio or cigarette
lighter
--
and use its fuse, if it is the correct amperage.
Replace it as soon as you can. You will find a fuse puller
clipped in both of the fuse blocks. Snap the wide end
of the fuse puller at the side indentations and pull the
fuse out.
The MaxiFuses are located in two fuse blocks, one
located in the engine compartment on the passenger’s
side and the other under the rear seat on the driver’s
side. If a MaxiFuse should blow, have your vehicle
serviced by your dealer immediately.
Engine Compartment Fuse Block
The engine compartment
fuse block is located near
the front on the passenger’s
side of the vehicle.
See “Engine Compartment
Overview” in the Index
for more information
on location.
Lift the cover to gain access. Fuse 22 or 23 can be
moved to the outer position to provide continuous power
to the accessory power outlet or cigarette lighter when
the ignition is not on. See your dealer for additional
assistance, if needed.
Leaving an accessory on for a long period of time can
drain the vehicle’s battery.
6-70
Minifuse
Usage
1
Not Used
2
Accessory
3
Windshield Wipers
4
Not Used
5
Left Low
-
Beam Headlamp
6
Right Low
-
Beam Headlamp
7
Spare
8
Powertrain Control
Module Battery
Minifuse
Usage
9
Right High
-
Beam Headlamp
10
Left High
-
Beam Headlamp
11
Ignition 1
12
Not Used
13
Transaxle
14
Cruise Control
15
Direct Ignition System
16
Injector Bank #2
17
Not Used
18
Not Used
19
Powertrain Control Module
Ignition
20
Oxygen Sensor
21
Injector Bank #1
22
Auxiliary Power
23
Cigarette Lighter
24
Fog Lamps/Daytime
Running Lamps
25
Horn
26
Air Conditioner Clutch
6-71
Micro Relays
Usage
27
High
-
Beam Headlamp
28
Low
-
Beam Headlamp
29
Fog Lamps
30
Daytime Running Lamps
31
Horn
32
Air Conditioner Clutch
33
HVAC Solenoid
Mini Relays
Usage
34
Accessory
35
Air Pump
36
Starter 1
37
Cooling Fan 2
38
Ignition 1
39
Cooling Fan Series/Parallel
40
Cooling Fan 1
Maxibreaker
Usage
41
Starter
MaxiFuses
Usage
42
Not Used
43
Empty
44
ABS
45
Air Pump A
46
Cooling Fan 2
47
Cooling Fan 1
Spare Fuses
Usage
48
Spare
49
Spare
50
Spare
51
Spare
52
Spare
53
Fuse Puller
6-72
Removing the Rear Seat Cushion
To access the battery and rear compartment fuse panels,
the rear seat cushion must be removed. This procedure is
somewhat difficult. You may wish to have your dealer
do this for you.
NOTICE:
The battery and main fuse blocks are located
under the rear seat cushion. The battery’s ground
terminal and some relay wires are exposed.
To help avoid damage to the battery and wires,
be careful when removing or reinstalling the
seat cushion. Do not remove covers from covered
parts. Do not store anything under the seat, as
objects could touch exposed wires and cause
a short.
To remove the rear seat cushion, do the following:
1.
Pull up on the front of the cushion to release the
front hooks.
2.
Pull the cushion up and out toward the front of
the vehicle.
CAUTION:
A safety belt that isn’t properly routed through
the seat cushion or is twisted won’t provide the
protection needed in a crash. If the safety belt
hasn’t been routed through the seat cushion at
all, it won’t be there to work for the next
passenger. The person sitting in that position
could be badly injured. After reinstalling the seat
cushion, always check to be sure that the safety
belts are properly routed and are not twisted.
6-74
Rear Underseat Fuse Block
The rear fuse block is
located beneath the rear seat
on the driver’s side. The
rear seat cushion must be
removed to access the fuse
block. See “Removing the
Rear Seat Cushion” earlier
in this section.
Minifuses
Usage
1
Fuel Pump
2
HVAC Blower
3
Memory
4
ALDL
5
Rear Fog Lamps
6
Compact Disc (CD)
7
Driver’s Door Module
8
Air Bag System
9
Not Used
6-75
Minifuses
Usage
10
Right Parking Lamp
11
Vent Solenoid
12
Ignition 1
13
Left Parking Lamp
14
Dimmer
15
Not Used
16
Left Front Heated Seat
17
Not Used
18
Rear Door Module
19
Stoplamp
20
Park/Reverse
21
Audio
22
Retained Accessory Power (RAP)
23
Not Used
24
Not Used
25
Passenger Door Module
26
Body
27
Interior Lamps
28
Not Used
29
Ignition Switch
Minifuses
Usage
30
Instrument Panel
31
Right Front Heated Seat
32
Not Used
33
HVAC
34
Ignition 3 Rear
35
Anti
-
Lock Brake System (ABS)
36
Turn Signal/Hazard
37
HVAC Battery
38
Dimmer
Micro Relays
Usage
39
Fuel Pump
40
Parking Lamp
41
Ignition 1
42
Rear Fog Lamp
43
Not Used
44
Park
45
Reverse
46
Retained Accessory Power (RAP)
6-76
Micro Relays
Usage
47
Fuel Tank Door Lock
48
Not Used
49
Ignition 3
50
Fuel Tank Door Release
51
Interior Lamps
52
Trunk Release
53
Front Courtesy Lamps
54
Not Used
55
Electronic Level Control (ELC)
Circuit
Breakers
Usage
56
Power Seats
57
Power Windows
Mini Relays
Usage
58
Cigar
59
Rear Defogger
MaxiFuses
Usage
60
Not Used
61
Rear Defog
62
Not Used
63
Audio Amplifier
64
Electronic Level Control (ELC)
65
Cigar
66
Not Used
Spare Fuses
Usage
67
Not Used
68
Not Used
69
Not Used
70
Spare
71
Spare
72
Spare
73
Spare
74
Spare
75
Fuse Puller