Cadillac CTS-V Sedan - 2017 Fuse Box Diagram

Cadillac CTS-V Sedan - 2017 Fuse Box Diagram

INTRODUCTION
3
Danger, Warning, and
Caution
Warning messages found on vehicle
labels and in this manual describe
hazards and what to do to avoid or
reduce them.
{
Danger
Danger indicates a hazard with a
high level of risk which will result
in serious injury or death.
{
Warning
Warning indicates a hazard that
could result in injury or death.
Caution
Caution indicates a hazard that
could result in property or vehicle
damage.
A circle with a slash through it is a
safety symbol which means
Do Not,
Do not do this,
or
Do not let this
happen.
Symbols
The vehicle has components and
labels that use symbols instead of
text. Symbols are shown along with
the text describing the operation or
information relating to a specific
component, control, message, gauge,
or indicator.
M
:
Shown when the owner manual
has additional instructions or
information.
*
:
Shown when the service manual
has additional instructions or
information.
0
:
Shown when there is more
information on another page
see page.
Vehicle Symbol Chart
Here are some additional symbols that
may be found on the vehicle and what
they mean. For more information on
the symbol, refer to the Index.
9
:
Airbag Readiness Light
#
:
Air Conditioning
!
:
Antilock Brake System (ABS)
g
:
Audio Steering Wheel Controls or
OnStar
®
(if equipped)
$
:
Brake System Warning Light
"
:
Charging System
I
:
Cruise Control
`
:
Do Not Puncture
^
:
Do Not Service
B
:
Engine Coolant Temperature
O
:
Exterior Lamps
_
:
Flame/Fire Prohibited
.
:
Fuel Gauge
+
:
Fuses
3
:
Headlamp High/Low-Beam
Changer
(
:
Heated Steering Wheel
110
INSTRUMENTS AND CONTROLS
Date
To set the date:
1.
Touch the SETTINGS screen
button, then touch Time
and Date.
2.
Touch Set Date, then touch + or
to increase or decrease month,
day, or year.
3.
Touch
[
Back to go back to the
previous menu.
Auto Set
When on, the time and date will
automatically update.
To set auto set:
1.
Touch the SETTINGS screen
button, then touch Time
and Date.
2.
Touch Set Time or Set Date.
3.
Touch Auto Set, then select
On-Cell Network or Off-Manual
to manually set the time
and date.
4.
Touch
[
Back to go back to the
previous menu.
If auto set is on, the time displayed on
the clock may not update immediately
when driving into a new time zone.
Clock Display
When on, the digital clock will display
on the infotainment screen.
To set the clock display:
1.
Touch the SETTINGS screen
button, then touch Time
and Date.
2.
Touch Clock Display, then select
Off or On.
3.
Touch
[
Back to go back to the
previous menu.
Power Outlets
Power Outlets 12 Volt Direct Current
Accessory power outlets can be used
to plug in electrical equipment, such
as a cell phone or MP3 player.
The vehicle has three 12-volt
accessory power outlets:
.
Inside the center console storage
in front of the armrest cover.
.
Inside the storage area under the
armrest cover.
.
Inside the storage area on the rear
of the center console, if equipped.
These outlets are powered while the
vehicle is in ON/RUN/START or ACC/
ACCESSORY mode, or until the driver
door is opened within 10 minutes of
turning off the vehicle.
Lift the cover to access the accessory
power outlet.
Certain electrical accessories may not
be compatible with the accessory
power outlet and could overload a
vehicle circuit breaker or adapter fuse.
If overloaded, the circuit breaker will
reset after all devices are disconnected
or if Retained Accessory Power (RAP)
is turned off and then back on. See
Retained Accessory Power (RAP)
0
208
.
Wait one minute to allow the circuit
breaker to reset before reconnecting
devices or turning RAP back on. If the
problem continues, the issue could be
within your device. Try another
known good device to make sure the
circuit breaker is operating properly.
If this does not resolve your problem,
see your dealer.
INSTRUMENTS AND CONTROLS
111
It is possible to replace the factory
power outlet with a cigar lighter
receptacle, if desired. This requires the
factory installed circuit breaker to be
replaced with a standard minifuse by
the dealer. A minifuse will not reset
and will have to be replace if blown.
Caution
Failure to replace the circuit
breaker with the minifuse could
overheat the cigar lighter and
damage the vehicle.
When adding electrical equipment, be
sure to follow the proper installation
instructions included with the
equipment. See
Add-On Electrical
Equipment
0
260
.
Caution
Adding any electrical equipment to
the vehicle may damage it or keep
other components from working as
they should. The repairs would not
be covered by the vehicle warranty.
(Continued)
Caution (Continued)
Do not use equipment exceeding
maximum amperage rating of
15 amperes. Check with your dealer
before adding electrical equipment.
Caution
Hanging heavy equipment from the
power outlet can cause damage not
covered by the vehicle warranty.
The power outlets are designed for
accessory power plugs only, such as
cell phone charge cords.
Power Outlet 110/120 Volt
Alternating Current
If equipped, this power outlet is inside
the center console. It can be used to
plug in electrical equipment that uses
a maximum limit of 150 watts.
An indicator light on the outlet turns
on to show it is in use. The light
comes on when the ignition is in ON/
RUN, equipment requiring less than
150 watts is plugged into the outlet,
and no system fault is detected.
The indicator light does not come on
when the ignition is in LOCK/OFF or if
the equipment is not fully seated into
the outlet.
If equipment is connected using more
than 150 watts or a system fault is
detected, a protection circuit shuts off
the power supply and the indicator
light turns off. To reset the circuit,
unplug the item and plug it back in or
turn the Retained Accessory Power
LIGHTING
165
starting the vehicle; driving a short
distance is required to calibrate the
AFL. See
Exterior Lamp Controls
0
161
.
Hazard Warning Flashers
|
:
Press and hold this button for
one second to make the front and rear
turn signal lamps flash on and off.
Release the button for at least
one second and press again to turn
the flashers off.
The hazard warning flashers turn on
automatically if the airbags deploy.
Turn and Lane-Change
Signals
Move the lever all the way up or down
to signal a turn.
An arrow on the instrument cluster
flashes in the direction of the turn or
lane change.
Raise or lower the lever until the
arrow starts to flash to signal a lane
change. Hold it there until the lane
change is completed. If the lever is
briefly pressed and released, the turn
signal flashes three times.
The turn and lane-change signal can
be turned off manually by moving the
lever back to its original position.
If after signaling a turn or lane
change, the arrow flashes rapidly or
does not come on, a signal bulb might
be burned out.
Replace any burned out bulbs. If a
bulb is not burned out, check the fuse.
See
Fuses and Circuit Breakers
0
293
.
266
VEHICLE CARE
1.
Windshield Washer Fluid
Reservoir. See
Washer
Fluid
0
284
.
2.
Remote Positive (+) Battery
Terminal. See
Jump Starting -
North America
0
330
.
3.
Engine Compartment Fuse
Block
0
294
.
4.
Engine Coolant Surge Tank and
Pressure Cap. See
Cooling
System
0
277
.
5.
Remote Negative (-) Battery
Terminal. See
Jump Starting -
North America
0
330
.
6.
Engine Oil Fill Cap. See
Engine
Oil
0
272
.
7.
Engine Cooling Fan (Out of
View). See
Cooling System
0
277
.
8.
Engine Oil Dipstick. See
Engine
Oil
0
272
.
9.
Engine Air Cleaner/Filter
0
276
.
10.
Brake Fluid Reservoir. See
Brake
Fluid
0
285
.
268
VEHICLE CARE
1.
Windshield Washer Fluid
Reservoir. See
Washer
Fluid
0
284
.
2.
Remote Positive (+) Battery
Terminal. See
Jump Starting -
North America
0
330
.
3.
Remote Negative (-) Battery
Terminal. See
Jump Starting -
North America
0
330
.
4.
Engine Coolant Surge Tank and
Pressure Cap. See
Cooling
System
0
277
.
5.
Engine Compartment Fuse
Block
0
294
.
6.
Engine Cooling Fan (Out of
View). See
Cooling System
0
277
.
7.
Engine Oil Fill Cap. See
Engine
Oil
0
272
.
8.
Engine Oil Dipstick. See
Engine
Oil
0
272
.
9.
Brake Fluid Reservoir. See
Brake
Fluid
0
285
.
10.
Engine Air Cleaner/Filter
0
276
.
270
VEHICLE CARE
1.
Windshield Washer Fluid
Reservoir. See
Washer
Fluid
0
284
.
2.
Remote Positive (+) Battery
Terminal. See
Jump Starting -
North America
0
330
.
3.
Engine Compartment Fuse
Block
0
294
.
4.
Engine Coolant Surge Tank and
Pressure Cap. See
Cooling
System
0
277
.
5.
Remote Negative (-) Battery
Terminal. See
Jump Starting -
North America
0
330
.
6.
Engine Cooling Fan (Out of
View). See
Cooling System
0
277
.
7.
Engine Oil Fill Cap. See
Engine
Oil
0
272
.
8.
Engine Oil Dipstick. See
Engine
Oil
0
272
.
9.
Engine Air Cleaner/Filter
0
276
.
10.
Brake Fluid Reservoir. See
Brake
Fluid
0
285
.
272
VEHICLE CARE
1.
Windshield Washer Fluid
Reservoir. See
Washer
Fluid
0
284
.
2.
Remote Positive (+) Battery
Terminal. See
Jump Starting -
North America
0
330
.
3.
Engine Compartment Fuse
Block
0
294
.
4.
Engine Coolant Surge Tank and
Pressure Cap. See
Cooling
System
0
277
.
5.
Remote Negative (-) Battery
Terminal. See
Jump Starting -
North America
0
330
.
6.
Engine Oil Dipstick. See
Engine
Oil
0
272
.
7.
Engine Cooling Fan (Out of
View). See
Cooling System
0
277
.
8.
Engine Oil Fill Cap (Out of View).
See
Engine Oil
0
272
.
9.
Engine Air Cleaner/Filter
0
276
.
10.
Brake Fluid Reservoir. See
Brake
Fluid
0
285
.
Engine Oil
To ensure proper engine performance
and long life, careful attention must
be paid to engine oil. Following these
simple, but important steps will help
protect your investment:
.
Use engine oil approved to the
proper specification and of the
proper viscosity grade. See
Selecting the Right Engine Oil
in
this section.
.
Check the engine oil level regularly
and maintain the proper oil level.
See
Checking Engine Oil
and
When to Add Engine Oil
in this
section.
.
Change the engine oil at the
appropriate time. See
Engine Oil
Life System
0
274
.
.
Always dispose of engine oil
properly. See
What to Do with
Used Oil
in this section.
Checking Engine Oil
Check the engine oil level regularly
(every 650 km (400 mi), especially
prior to a long trip. The engine oil
dipstick handle is a loop. See
Engine
Compartment Overview
0
265
for the
location.
{
Warning
The engine oil dipstick handle may
be hot; it could burn you. Use a
towel or glove to touch the dipstick
handle.
If a low oil Driver Information Center
(DIC) message displays, check the oil
level.
Follow these guidelines:
.
To get an accurate reading, park
the vehicle on level ground. Check
the engine oil level after the
engine has been off for at least
two hours. Checking the engine oil
level on steep grades or too soon
after engine shutoff can result in
incorrect readings. Accuracy
improves when checking a cold
engine prior to starting. Remove
the dipstick and check the level.
VEHICLE CARE
287
Warning (Continued)
chemicals known to the State of
California to cause cancer.
WASH
HANDS AFTER HANDLING.
See
California Proposition
65 Warning
0
262
.
After a power loss, such as
disconnecting the battery or removing
the maxi fuses in the power
distribution fuse block, the following
steps must be performed to calibrate
the electronic throttle control. If this
is not done, the engine will not run
properly.
1.
Turn the ignition on but do not
start the engine.
2.
Leave the ignition on for at least
three minutes so that the
electronic throttle control will
cycle and relearn its home
position.
3.
Turn the ignition off.
4.
Start and run the engine for at
least 30 seconds.
Vehicle Storage
{
Warning
Batteries have acid that can burn
you and gas that can explode. You
can be badly hurt if you are not
careful. See
Jump Starting - North
America
0
330
for tips on working
around a battery without
getting hurt.
Infrequent Usage: Remove the black,
negative (
) cable from the battery to
keep the battery from running down.
Extended Storage: Remove the black,
negative (
) cable from the battery or
use a battery trickle charger.
All-Wheel Drive
If the vehicle is equipped with
All-Wheel-Drive (AWD), this is an
additional system that needs
lubrication.
Transfer Case
When to Check Lubricant
It is not necessary to regularly check
the transfer case fluid unless a leak is
suspected or an unusual noise is
heard. A fluid loss could indicate a
problem. Have it inspected and
repaired.
VEHICLE CARE
293
Electrical System
Electrical System Overload
The vehicle has fuses and circuit
breakers to protect against an
electrical system overload.
When the current electrical load is too
heavy, the circuit breaker opens and
closes, protecting the circuit until the
current load returns to normal or the
problem is fixed. This greatly reduces
the chance of circuit overload and fire
caused by electrical problems.
Fuses and circuit breakers protect
power devices in the vehicle.
Replace a bad fuse with a new one of
the identical size and rating.
If there is a problem on the road and
a fuse needs to be replaced, the
same amperage fuse can be borrowed.
Choose some feature of the vehicle
that is not needed to use and replace
it as soon as possible.
Headlamp Wiring
An electrical overload may cause the
lamps to go on and off, or in some
cases to remain off. Have the
headlamp wiring checked right away if
the lamps go on and off or remain off.
Windshield Wipers
If the wiper motor overheats due to
heavy snow or ice, the windshield
wipers will stop. Wiper function is
available immediately after the wiper
switch is set to off, and back to on.
To protect the wiper motor from
overheating, the wipers may slow
down when the windshield is dry for a
long period of time. If a period of dry
operation, or little moisture, exceeds
10 minutes, the wipers may switch to
intermittent operation, and remain
there. When moisture is again
detected on the windshield, wiper
operation will return to the operator
selected speed.
Although the circuit is protected from
electrical overload, overload due to
heavy snow or ice may cause wiper
linkage damage. Always clear ice and
heavy snow from the windshield
before using the windshield wipers.
If the overload is caused by an
electrical problem and not snow or
ice, be sure to get it fixed.
Fuses and Circuit Breakers
The wiring circuits in the vehicle are
protected from short circuits by a
combination of fuses and circuit
breakers. This greatly reduces the
chance of damage caused by electrical
problems.
To check a fuse, look at the
silver-colored band inside the fuse.
If the band is broken or melted,
replace the fuse. Be sure to replace a
bad fuse with a new one of the
identical size and rating.
Fuses of the same amperage can be
temporarily borrowed from another
fuse location, if a fuse goes out.
Replace the fuse as soon as possible.
294
VEHICLE CARE
To identify and check fuses, circuit
breakers, and relays, see
Engine
Compartment Fuse Block
0
294
,
Instrument Panel Fuse Block
0
297
, and
Rear Compartment Fuse Block
0
299
.
Engine Compartment Fuse
Block
The underhood fuse block is on the
passenger side of the engine
compartment.
Lift the fuse block cover to access the
fuses.
The vehicle may not be equipped with
all of the fuses and relays shown.
Caution
Spilling liquid on any electrical
component on the vehicle may
damage it. Always keep the covers
on any electrical component.
VEHICLE CARE
295
Fuses
Usage
1
2
*3
Passenger motorized
safety belt
4
5
6
Driver power seat
7
9
10
11
12
13
Passenger power seat
14
15
Passive entry/Passive
start/Front wipers
16
*17
Headlamp washers
18
19
ABS pump
20
ABS valve
296
VEHICLE CARE
Fuses
Usage
*21
22
Driver motorized
safety belt
*26
27
/Heated seat 2
28
/Reverse lock out
*29
AFS AHL/Pedestrian
protection
30
31
Passenger window
switch
32
33
Sunroof
34
Front wiper
35
Steering column lock
36
RBEC/Ignition
37
/MIL/Ignition
38
Aeroshutter
39
O2 sensor/Emissions
40
Ignition coil/Injectors
Fuses
Usage
41
/Ignition coil/
Injectors
*42
Engine control
module
43
44
45
Washer
48
Instrument panel/
Body/Ignition
49
FSCM/Ignition
*50
Heated steering
wheel
*51
Engine control
module/Ignition
*52
TCM/Ignition
53
Coolant pump
55
*56
TCM/
*64
Automatic headlamp
leveling
*65
Left HID headlamp
66
Right HID headlamp
Fuses
Usage
67
High-beam
headlamps
68
Headlamp leveling
motor
69
Horn
71
Coolant fan
72
Starter 2
*73
Brake vacuum pump
74
Starter
75
A/C clutch
76
Relays
Usage
*8
Headlamp washer
23
Wiper control relay
24
Wiper speed
25
Engine control
module
46
Rear washer
47
Front washer
*54
Coolant pump
VEHICLE CARE
297
Relays
Usage
57
Low-beam headlamp
58
High-beam headlamp
59
Run/Crank
60
Starter 2
*61
Vacuum pump
62
Starter
*63
A/C control
70
Horn
* Optional
Instrument Panel Fuse
Block
The instrument panel fuse block is in
the end of the driver side of the
instrument panel.
To access the fuses, remove the end
panel by gently prying with a plastic
tool near each clip, beginning at the
point shown.
To install the end cover, insert the
tabs on the back of the cover into the
slots in the instrument panel at the
points shown. Align the clips with the
slots in the instrument panel, and
press the cover into place.
The vehicle may not be equipped with
all of the fuses and relays shown.
298
VEHICLE CARE
Fuses
Usage
2
Motorized cupholder
3
Electric steering
column lock
4
5
HVAC control
6
Tilt/Telescoping
steering column
8
Data link connector
9
Glove box release
10
Shunt
11
Body control
module 1
12
Body control
module 5
13
Body control
module 6
14
15
Body control
module 7
16
Transmission control
module
17
VEHICLE CARE
299
Fuses
Usage
18
19
Auxiliary power
outlet
20
Lighter
21
Wireless charger
22
Sensing diagnostic
module/ Automatic
occupant sensing
23
Radio/DVD/HVAC
control
24
Display
25
Heated steering
wheel
26
Wireless charger
27
Steering wheel
switches
28
29
Visor
30
31
32
Retained accessory
power
Fuses
Usage
33
Front HVAC blower
CB1
Accessory power
outlet
CB7
K10
Retained accessory
power
K605
Logistics
K644
Retained accessory
power/Glove box
release
Rear Compartment Fuse
Block
The rear compartment fuse block is
behind a cover on the driver side of
the rear compartment.
The vehicle may not be equipped with
all of the fuses, relays, and features
shown.
300
VEHICLE CARE
Fuses
Usage
*1
Rear driver control
module/DC DC
transformer
2
Left window
3
Body control
module 8
*4
A/C inverter
5
Passive entry/Passive
start/Battery 1
6
Body control
module 4
7
Heated mirror
8
Amplifier
9
Rear defogger
10
Glass break
*11
Trailer connector
12
OnStar (if equipped)
13
Right window
14
Electric parking
brake
15
VEHICLE CARE
301
Fuses
Usage
16
Trunk release
*17
RUN relay
*18
Logistics relay
*19
20
Rear window
defogger relay
21
Mirror window
module
22
23
Canister vent
24
Body control
module 2
*25
Rear vision camera
*26
Front ventilated seats
*27
SBZA/LDW/EOCM
*28
Trailer/Sunshade
*29
Rear heated seats
*30
Semi-active damping
system
*31
Traction control
module/Rear control
drive module
Fuses
Usage
32
Theft deterrent
module/Universal
garage door opener/
Rain sensor
*33
UPA
*34
Radio/DVD
35
Exhaust valve
*36
Trailer
37
Fuel pump/Fuel
system control
module
38
Fuel pump
39
40
Exhaust valve
41
Run/Crank 2
*42
Memory seat module
43
Body control
module 3
44
45
Battery regulated
voltage control
46
Engine control
module/Battery
Fuses
Usage
47
48
*49
Trailer module
50
Door lock security
51
Rear closure release
52
Rear closure
53
54
Door lock security
55
*56
Fuel door
* Optional