Buick Verano - 2016 Fuse Box Diagram

Buick Verano - 2016 Fuse Box Diagram

In Brief
7
1.
Air Vents
0
173
.
2.
Headlamp High/Low-Beam
Changer
0
132
.
Turn Signal Lever. See
Turn
and Lane-Change
Signals
0
135
.
Driver Information Center (DIC)
Buttons. See
Driver Information
Center (DIC)
0
114
.
3.
Instrument Cluster
0
102
.
4.
Windshield Wiper/Washer
0
98
.
5.
Traction Control/Electronic
Stability Control
0
204
.
Lane Departure Warning
(LDW)
0
216
(If Equipped).
6.
Light Sensor. See
Automatic
Headlamp System
0
133
.
7.
Hazard Warning
Flashers
0
134
.
8.
Passenger Airbag Status
Indicator
0
105
.
Trunk Release Button. See
Trunk
0
37
.
9.
Infotainment
0
139
.
10.
Dual Automatic Climate Control
System
0
170
(If Equipped).
Heated Front Seats
0
53
(If
Equipped).
Heated Steering Wheel
0
98
(If
Equipped).
11.
Electric Parking Brake. See
Parking Brake
0
201
.
12.
Shift Lever. See
Automatic
Transmission
0
196
or
Manual
Transmission
0
199
(If
Equipped).
13.
ENGINE START/STOP Button.
See
Ignition Positions (Keyless
Access)
0
186
or
Ignition
Positions (Key Access)
0
188
.
14.
Steering Wheel Controls
0
97
.
15.
Horn
0
98
.
16.
Steering Wheel
Adjustment
0
97
.
17.
Cruise Control
0
206
.
Forward Collision Alert (FCA)
System
0
212
(If Equipped).
18.
Data Link Connector (DLC)
(Out of View). See
Malfunction
Indicator Lamp (Check Engine
Light)
0
106
.
19.
Instrument Panel Fuse
Block
0
258
.
20.
Exterior Lamp Controls
0
132
.
Front Fog Lamps
0
135
(If
Equipped).
Instrument Panel Illumination
Control
0
136
.
21.
Hood Release. See
Hood
0
230
.
100
Instruments and Controls
5.
To save the time and return to
the Time and Date menu, press
/
BACK at any time or press
the TUNE/MENU knob after
adjusting the minutes.
Setting the 12/24 Hour Format
1.
Press the CONFIG button and
select Time and Date or
press
H
.
2.
Highlight 12/24 Hour Format.
3.
Press TUNE/MENU to select
the 12 hour or 24 hour display
format.
Setting the Clock (Radio with
CD and Touch Screen)
The clock is in the center stack
display.
To set the time:
1.
Press the CONFIG button to
enter the menu options or
press
H
. Turn the TUNE/
MENU knob to scroll through
the available setup features
and select Time and Date.
Press TUNE/MENU or press
the Time screen button to
display other options within that
feature.
2.
Press + or
to increase or
decrease the Hours and
Minutes displayed on the clock.
If auto timing is set, the time
displayed on the clock may not
update immediately when driving
into a new time zone.
12/24 HR Format :
Press the 12 HR
screen button for standard time;
press the 24 HR screen button for
military time.
Day + or Day
:
Press the Day +
or Day
display buttons to increase
or decrease the day.
Display :
Press Display to turn the
display of the time on the screen on
or off.
Power Outlets
The accessory power outlets can be
used to plug in electrical equipment,
such as a cell phone or MP3 player.
There is one accessory power outlet
on the center stack below the
climate controls and one on the rear
of the center floor console. These
outlets are powered when the key is
in ON/RUN or ACC/ACCESSORY,
or until the driver door is opened
within 10 minutes of turning off the
vehicle. See
Retained Accessory
Power (RAP)
0
192
.
Caution
Leaving electrical equipment
plugged in for an extended period
of time while the vehicle is off will
drain the battery. Always unplug
electrical equipment when not in
use and do not plug in equipment
that exceeds the maximum
20 amp rating.
Certain electrical accessories may
not be compatible with the
accessory power outlet and could
overload vehicle or adapter fuses.
If a problem is experienced, see
your dealer.
Lighting
135
Turn and Lane-Change
Signals
Move the lever all the way up or
down to signal a turn.
An arrow on the instrument cluster
will flash in the direction of the turn
or lane change.
Raise or lower the lever until the
arrow starts to flash to signal a lane
change. The turn signal flashes
three times.
The lever returns to its starting
position when it is released.
If after signaling a turn or lane
change the arrow flashes rapidly or
does not come on, a signal bulb
may be burned out. Replace any
burned out bulbs. If a bulb is not
burned out, check the fuse. See
Fuses and Circuit Breakers
0
255
.
Front Fog Lamps
For vehicles with front fog lamps,
the button is on the outboard side of
the instrument panel.
The ignition must be on to turn on
the fog lamps.
#
(Front Fog Lamps) :
Press to
turn the fog lamps on or off. An
indicator light on the instrument
cluster comes on when the fog
lamps are on.
The fog lamps come on together
with the parking lamps.
If the high-beam headlamps are
turned on, the fog lamps will turn off.
If the high-beam headlamps are
turned off, the fog lamps will turn
back on again.
Some localities have laws that
require the headlamps to be on
along with the fog lamps.
Vehicle Care
233
1.
Engine Air Cleaner/Filter
0
239
.
2.
Engine Oil Dipstick. See
Checking Engine Oil
under
Engine Oil
0
235
.
3.
Engine Cooling Fan (Out of
View). See
Cooling
System
0
240
.
4.
Engine Oil Fill Cap. See
When
to Add Engine Oil
under
Engine Oil
0
235
.
5.
Brake Fluid Reservoir. See
Brake Fluid
under
Brake
Fluid
0
247
.
6.
Battery - North America
0
248
(Under Cover).
7.
Engine Coolant Surge Tank
and Pressure Cap. See
Engine
Coolant
0
241
.
8.
Remote Positive (+) Terminal.
See
Jump Starting - North
America
0
290
.
9.
Engine Compartment Fuse
Block
0
256
.
10.
Windshield Washer Fluid
Reservoir. See
Adding Washer
Fluid
under
Washer
Fluid
0
245
.
Vehicle Care
235
1.
Engine Air Cleaner/Filter
0
239
.
2.
Engine Cooling Fan (Out of
View). See
Cooling
System
0
240
.
3.
Engine Oil Dipstick. See
Checking Engine Oil
under
Engine Oil
0
235
.
4.
Engine Oil Fill Cap. See
When
to Add Engine Oil
under
Engine Oil
0
235
.
5.
Brake Fluid Reservoir. See
Brake Fluid
under
Brake
Fluid
0
247
.
6.
Battery - North America
0
248
(Under Cover).
7.
Engine Coolant Surge Tank
and Pressure Cap. See
Engine
Coolant
0
241
.
8.
Remote Positive (+) Terminal.
See
Jump Starting - North
America
0
290
.
9.
Engine Compartment Fuse
Block
0
256
.
10.
Windshield Washer Fluid
Reservoir. See
Adding Washer
Fluid
under
Washer
Fluid
0
245
.
Engine Oil
To ensure proper engine
performance and long life, careful
attention must be paid to engine oil.
Following these simple, but
important steps will help protect
your investment:
.
Use engine oil approved to the
proper specification and of the
proper viscosity grade. See
Selecting the Right Engine Oil
in this section.
.
Check the engine oil level
regularly and maintain the
proper oil level. See
Checking
Engine Oil
and
When to Add
Engine Oil
in this section.
.
Change the engine oil at the
appropriate time. See
Engine Oil
Life System
0
237
.
.
Always dispose of engine oil
properly. See
What to Do with
Used Oil
in this section.
Checking Engine Oil
It is a good idea to check the engine
oil level at each fuel fill. In order to
get an accurate reading, the vehicle
must be on level ground. The
engine oil dipstick handle is a loop.
See
Engine Compartment Overview
0
232
for the location of the engine
oil dipstick.
Obtaining an accurate oil level
reading is essential:
1.
If the engine has been running
recently, turn off the engine and
allow several minutes for the oil
to drain back into the oil pan.
Checking the oil level too soon
after engine shutoff will not
provide an accurate oil level
reading.
{
Warning
The engine oil dipstick handle
may be hot; it could burn you.
Use a towel or glove to touch the
dipstick handle.
2.
Pull out the dipstick and wipe it
with a clean paper towel or
cloth, then push it back in all
the way. Remove it again,
keeping the tip down, and
check the level.
Vehicle Care
255
Electrical System
Electrical System
Overload
The vehicle has fuses and circuit
breakers to protect against an
electrical system overload.
When the current electrical load is
too heavy, the circuit breaker opens
and closes, protecting the circuit
until the current load returns to
normal or the problem is fixed. This
greatly reduces the chance of circuit
overload and fire caused by
electrical problems.
Fuses and circuit breakers protect
power devices in the vehicle.
Replace a bad fuse with a new one
of the identical size and rating.
If there is a problem on the road and
a fuse needs to be replaced, the
same amperage fuse can be
borrowed. Choose some feature of
the vehicle that is not needed to use
and replace it as soon as possible.
Headlamp Wiring
An electrical overload may cause
the lamps to go on and off, or in
some cases to remain off. Have the
headlamp wiring checked right away
if the lamps go on and off or
remain off.
Windshield Wipers
If the wiper motor overheats due to
heavy snow or ice, the windshield
wipers will stop until the motor
cools, and the wiper control is
turned off. After removal of the
blockage, the wiper motor will
restart when the control is moved to
the desired operating position.
Although the circuit is protected
from electrical overload, overload
due to heavy snow or ice may
cause wiper linkage damage.
Always clear ice and heavy snow
from the windshield before using the
windshield wipers.
If the overload is caused by an
electrical problem and not snow or
ice, be sure to get it fixed.
Fuses and Circuit
Breakers
The wiring circuits in the vehicle are
protected from short circuits by a
combination of fuses and circuit
breakers. This greatly reduces the
chance of damage caused by
electrical problems.
To check a fuse, look at the
silver-colored band inside the fuse.
If the band is broken or melted,
replace the fuse. Be sure to replace
a bad fuse with a new one of the
identical size and rating.
Fuses of the same amperage can
be temporarily borrowed from
another fuse location, if a fuse goes
out. Replace the fuse as soon as
possible.
To identify and check fuses, circuit
breakers, and relays, see
Engine
Compartment Fuse Block
0
256
,
Instrument Panel Fuse Block
0
258
,
and
Rear Compartment Fuse
Block
0
260
.
256
Vehicle Care
Engine Compartment
Fuse Block
To open the fuse block cover, press
the clips at the front and back and
rotate the cover up to the side.
Caution
Spilling liquid on any electrical
component on the vehicle may
damage it. Always keep the
covers on any electrical
component.
Engine Compartment Fuse Block
There is a fuse puller in the engine
compartment fuse block.
The vehicle may not be equipped
with all of the fuses, relays, and
features shown.
Fuses
Amps
Usage
1
20A
Engine control
module
Fuses
Amps
Usage
2
7.5A
O2 sensor/
Purge solenoid
3
15A
Ignition coils/
Injectors
4
15A
5
6a
Vehicle Care
257
Fuses
Amps
Usage
6b
7.5A
Mirror defogger
7
5A
Powertrain
cooling
8
7.5A
Mass airflow
sensor/Pre
O2
sensor
9
10
5A
Battery
potential signal
11
7.5A
12
13
25A
ABS valve
14
15
10A
Engine control
module
16
30A
Starter control
17
10A
Transmission
control module
18
30A
Rear window
defogger
19
30A
Front power
window
Fuses
Amps
Usage
20
30A
Rear power
window
21
40A
Rear electrical
center
22
23
24
15A
Right
high-beam
headlamp
25
15A
Left high-beam
headlamp
26
15A
Front fog
lamps
27
50A
28
29
30A
Electric parking
brake
30
60A
ABS pump
31
32
5A
Airbag
33
34
7.5A
Fuses
Amps
Usage
35
7.5A
Door switch
supply/Left
power window
36
10A
A/C clutch
37
10A
Canister vent
38
39
20A
Fuel system
control module
40
10A
Front
windshield
washer
41
42
40A
Engine cooling
fan (RPO LEA)
43
30A
Front wipers
44
45
30A
Engine cooling
fan (RPO LEA)
46
47
15A
Horn
48
60A
Engine
cooling fan
49
20A
Fuel pump
258
Vehicle Care
Fuses
Amps
Usage
50
5A
Rear vision
camera
51
7.5A
Interior
rearview mirror
52
53
7.5A
Ignition engine
control module/
Transmission
control module
54
7.5A
Instrument
cluster/Fuel
system control
module/HVAC/
Run/Crank
Relays
Usage
1
2
Starter
3
Engine control
powertrain
4
Rear window
defogger
5
Relays
Usage
6
High-beam
headlamps
7
8
9
10
EGR/Coolant pump/
AIR solenoid valve
11
Engine cooling fan
(RPO LEA)
12
Engine cooling fan
(RPO LEA)
13
Engine cooling fan
(RPO LEA)
14
Run/Crank
Instrument Panel Fuse
Block
The instrument panel fuse block is
on the driver side of the instrument
panel. To access:
1.
Open the storage
compartment.
2.
Pull straight down and out to
remove the storage
compartment.
3.
Remove the cover.
To reinstall the cover, line up the
retainers and push into place.
Vehicle Care
259
Instrument Panel Fuse Block
The vehicle may not be equipped
with all of the fuses, relays, and
features shown.
Fuses
Amps
Usage
1
2A
Steering wheel
controls
2
20A
Body control
module
3
20A
Body control
module
4
20A
Infotainment
system
5
10A
Information
display/Parking
assist
6
20A
Cigar lighter
7
20A
Power outlet
8
30A
Body control
module
9
30A
Body control
module
10
30A
Body control
module
11
40A
Interior fan
Fuses
Amps
Usage
12
25A
Driver
power seat
13
14
7.5A
Diagnostic
connector
15
10A
Airbag
16
10A
Central locking
system/
Tailgate
17
10A
A/C system
18
30A
Infotainment
system
19
30A
Body control
module
20
5A
Passenger
power seat
21
7.5A
Instrument
cluster
22
2A/5A
Ignition/
Electronic key
system
23
20A
Body control
module
260
Vehicle Care
Fuses
Amps
Usage
24
20A
Body control
module
25
26
Relays
Usage
1
Trunk open
2
Door security
3
Power outlet
Rear Compartment Fuse
Block
The rear compartment fuse block,
if equipped, is on the left side of the
trunk behind a cover.
Vehicle Care
261
The vehicle may not be equipped
with all of the fuses, relays, and
features shown.
Fuses
Amps
Usage
F1
F02
F03
5A
Rear parking
assist
F04
Fuses
Amps
Usage
F5
F06
F07
10A
F08
F09
F10
F11
Fuses
Amps
Usage
F12
F13
F14
F15
F16
5A
Rear vision
camera
F17
F18
F19
7.5A
Heated
steering wheel
F20
25A
Sunroof
F21
25A
Heated seats
F22
F23
F24
F25
5A
Side blind
zone alert
F26
30A
F27
30A
Passive entry/
Passive start
F28
262
Vehicle Care
Fuses
Amps
Usage
F29
F30
F31
30A
Amplifier
F32
Relays
Usage
R01
R02
Run
R03
R04
R05
Wheels and Tires
Tires
Every new GM vehicle has
high-quality tires made by a
leading tire manufacturer. See
the warranty manual for
information regarding the tire
warranty and where to get
service. For additional
information refer to the tire
manufacturer.
{
Warning
.
Poorly maintained and
improperly used tires are
dangerous.
.
Overloading the tires can
cause overheating as a
result of too much
flexing. There could be a
blowout and a serious
crash. See
Vehicle Load
Limits
0
182
.
(Continued)
Warning (Continued)
.
Underinflated tires pose
the same danger as
overloaded tires. The
resulting crash could
cause serious injury.
Check all tires frequently
to maintain the
recommended pressure.
Tire pressure should be
checked when the tires
are cold.
.
Overinflated tires are
more likely to be cut,
punctured, or broken by
a sudden impact
such
as when hitting a pothole.
Keep tires at the
recommended pressure.
.
Worn or old tires can
cause a crash. If the
tread is badly worn,
replace them.
(Continued)