Cadillac Eldorado - 1994 Fuse Box Diagram

Cadillac Eldorado - 1994 Fuse Box Diagram

This
light
reminds
you
to arm the theft deterrent system.
Here’s how to
do it:
1.
Open the door.
2.
Lock the
door with the power aoor lock
switch or Keyless Entry
System. The
“SECURITY”
light
should
come
on and stay
on.
3.
Close
all
doors. The “SECURITY” light
should
go
off.
If
a
door
or
the
trunk
is opened without the
key
or Keyless Entry System,
the alarm will
go
off.
It will
also
go
off
if
the’trunk lock
is
damaged.
Your
vehicle’s
lights
will
flash
and thehorn will sound for
3
minutes, then will
go
off
to save battery power.
1.
\
Remember, the theft deterrent system w
h
t
arm
if
you lock the doors
with a key or manual door lock. It arms
only
if
you use a power door lock
switch or Keyless Entry System.
Here’s
how to avoid setting
off
the alarm
by
accident:
If
you
dop’t
want to arm the theft deterrent system, the vehicle
should
be locked
with
the
door key after
the doors are closed.
Always
unlock a door with
a
key, or use the Keyless Entry System.
If
you set
off
the alarm by accident,
unlock
any
door with
your
key.
You
Unlocking a door any other way
will set off the alarm.
can
also
turn
off
the alarm by using the Keyless Entry Syste
it. The alarm won’t stop if
you try to unlock a door any
How
to
Test
The
Alarm
Roll
down
your
window
and lock
your
vehicle
using
the power door
lock or
the Keyless Entry System.
Reach
in and unlock the
door using the manual
lock,
and open the
If
the alarm does not sound when it should,
check
to see
if
the horn
works. The horn fuse may
be
blown.
To
replace the fuse, see “Fuses
and
Circuit Breakers” in the Index.
To reduce the possibility
of theft, always
arm
the theft deterrent system
when
leaving
your
vehicle.
door. The
horn will sound
and
your
headlights
will
flash.
81
Your
vehicle
is
equipped
with
(Personalized
Automotive
Security
System)
theft
deterrent system.
is
a
passive
theftdeterrent system.
This
means
you
don’t
have
to
do anything
different to arm or disarm
the
system.
It works
when
you
insert or remove
the
key
from the ignition.
uses
a
resistor
pellet in the
ignition key that matches
a
decoder
in
your
vehicle.
system
senses
that someone is
using
the wrong
key, it shuts down the vehicle’s starter and
fuel
systems.
For
about
three
minutes, the starter won’t
work and
fuel won’t
go to the
engine.
If
someone
tries
to start your
vehicle
again
or uses another
key
during
this
time, the vehicle will not
start.
This
discourages
someone
from
random
trying
different
keys
with
different
resistor
pellets
in
an attempt to make
a
match.
The ignition key must
be
clean
and
dry
before
it’s
inserted
in
the ignition
or
the engine may not
start. If
the
engine
does
not
start and the
SECURITY
light
comes
on,
the key
may be dirty or wet.
Turn the
ignition
off.
Clean
and dry the
key.
If
the starter still
won’t
work,
and the key appears
to be clean
and
dry,
wait
about
three minutes
and
try
the other ignition
key.
At this
time, you
may also
want
to check the fuses
(see
Fuses
and
Circuit
Breakers”
in
the
Index). If the starter won’t
work
with the other
key,
your
vehicle
needs
seivice.
If your
vehicle
does
start, the first
ignition
key
may be
faulty.
See
your
Cadillac
dealer
or a
locksmith
who
can
service the [email protected]
If
you accidentally
use
a
key
that has
a
damagea
or
missing resistor
pellet,
the
starter won’t
work
But
you
don’t
have
to wait three minutes
before
trying one of the other ignition
keys.
See
your
Cadillac
dealer
or a
locksmith
who
can
service
to have
a
new
key made.
If you’re
ever
driving
and
you get the “PASS-KEY MALFUNCTION”
message you
will
be
able
to
restart
your
engine
if
you turn
it
off.
Your
PASS-Key% system,
however,
is
not
working
properly
and
must
be
serviced by your
Cadillac
dealer. Your
vehicle
is
not
protected
by the
system.
82
If
a
bulb
is burned out,
~
~
p
~
a
~
~
~
,
~
~
.
~
~
~
.
h
~
,?wide$.
If
the green
arrows
don’t
go
on
at all
when
you
signal-a
turn,
check the
fuse
(see
Fuses
in
the Index) and for burned-out bulbs.
Operation
of
Lights
Although
your
vehicle’s
lighting
system
(headlights,
parking
lights,
fog
lamps,
side marker lights
and
taillights) meets all
applicable
federal
lighting requirements, certain states and
provinces may
apply their
own
lighting
regulations
that may require special attention before you operate
these lights.
For example,
some
jurisdictions
may
require that you operate your
lower
beam
lights
with
fog
lamps
at all
times, or
that headlights be turned on
whenever
you
must
use
your
windshield
wipers.
In addition,
most
jurisdictions prohibit driving
solely
with
parking
lights,
especially
at dawn
or dusk. It is
recommended
that you
check
with
your
own
state
or
provincial
highway
authoritfi
for applicable
lighting
regulations.
Headlight
High-Low
Beam
To
change the
headlights
from
low
‘beam to high or high to
low,
pull
the
turn signal
lever
all
the way toward
you. Then release it.
When the high
beams
are on, this
blue
light
on
the instrument
panel also
will be on.
Flash-To-Pass
Feature
This lets you use
your
high
beam
headlights
to signal a driver
in front of
you that you
want
to pass. It works
even if your
headlights are off.
To
use it, pull the multifunction
lever
toward
you.
When you
do:
105
There
is
a fuse
removal
tool and some
spare
mini
fuses
in the
glove
box door, just
lift
the cover
up.
hgine Compartment Fuse
Block
A
To
gain
access,
lift
the
cover.
Maxi
FuseslRelay
Center
The
maxi
fuse and relays are located
next to
the
engine compartment fuse
block.
If
a maxi fuse
should
blow,
have
your
vehicle
serviced
by your
Cadillac dealer immediately.
312