Toyota Aygo - 2013 Fuse Box Diagram

Toyota Aygo - 2013 Fuse Box Diagram

236
3-6. Other interior features
AYGO_WE_99G80E
Power outlet
The power outlet can be used when
The engine switch is in the “ACC” or “ON” position.
NOTICE
To avoid damaging the power outlet
Close the power outlet lid when the power outlet is not in use.
Foreign objects or liquids that enter the power outlet may cause a short cir-
cuit.
To prevent blown fuse
Do not use an accessory that uses more than 12 V 120 W.
To prevent battery discharge
Do not use the power outlet longer than necessary when the engine is not
running.
The power outlet can be used for 12 V accessories that run on less
than 120 W.
251
4
Maintenance and care
AYGO_WE_99G80E
4-3. Do-it-yourself maintenance
Do-it-yourself service precautions
If you perform maintenance by yourself, be sure to follow the correct
procedures as given in these sections.
Items
Parts and tools
Battery condition
(
P. 266)
• Warm water
• Baking soda
• Grease
• Conventional wrench
(for terminal clamp bolts)
Engine coolant level
(
P. 264)
• “Toyota Super Long Life Coolant”
or a similar high quality ethylene
glycol-based non-silicate, non-
amine, non-nitrite and non-borate
coolant with long-life hybrid
organic acid technology. “Toyota
Super Long Life Coolant” is pre-
mixed with 50% coolant and 50%
deionized water.
• Funnel (used only for adding cool-
ant)
Engine oil level

P. 261)
• “Toyota Genuine Motor Oil” or
equivalent
• Rag or paper towel
• Funnel (used only for adding
engine oil)
Fuses
(
P. 282)
Fuse with same amperage rating
as original
Light bulbs
(
P. 292)
• Bulb with same number and watt-
age rating as original
• Phillips-head screwdriver
• Flathead screwdriver
• Wrench
Radiator and condenser
(
P. 266)
260
4-3. Do-it-yourself maintenance
AYGO_WE_99G80E
Engine compartment
Washer fluid tank (
P. 269)
Engine oil level dipstick
(
P. 261)
Engine oil filler cap
(
P. 262)
Fuse box
(
P. 282)
Battery
(
P. 266)
Engine coolant reservoir
(
P. 264)
Condenser
(
P. 266)
Electric cooling fan
Radiator
(
P. 266)
282
4-3. Do-it-yourself maintenance
AYGO_WE_99G80E
Checking and replacing fuses
If any of the electrical components do not operate, a fuse may have
blown. If this happens, check and replace the fuses as necessary.
Turn the engine switch to the “LOCK” position.
Open the fuse box cover.
Engine compartment
Push the tab in and lift the lid
off.
Instrument panel
If the following procedures seems difficult to perform, consult any
authorized Toyota dealer or repairer, or another duly qualified and
equipped professional.
Remove the meter cover
screws, by using a Phillips-
head screwdriver.
If the steering lock is engaged,
please disengage it. (
P. 127)
283
4-3. Do-it-yourself maintenance
4
Maintenance and care
AYGO_WE_99G80E
Remove the bottom screw
of the tachometer, and lift
and pull up on the tachome-
ter.
Pull the meter cover for-
ward, lift up, and remove
the meter cover.
After a system failure, see “Fuse layout and amperage
ratings” (
P. 285) for details about which fuse to check.
Remove the fuse.
Only type A fuse can be
removed using the pullout
tool.
screw
284
4-3. Do-it-yourself maintenance
AYGO_WE_99G80E
Check if the fuse is blown.
Type A
Normal fuse
Blown fuse
Replace the blown fuse with a
new fuse of an appropriate
amperage rating.
Type B
Normal fuse
Blown fuse
Replace the blown fuse with a
new fuse of an appropriate
amperage rating.
Type C
Normal fuse
Blown fuse
Contact any authorized Toyota
dealer or repairer, or another
duly qualified and equipped
professional.
285
4-3. Do-it-yourself maintenance
4
Maintenance and care
AYGO_WE_99G80E
Fuse layout and amperage ratings
Engine compartment (top side)
Fuse
Ampere
Circuit
1
DRL
5 A
Daytime running lights
2
FOG FR
20 A
Front fog lights
3
H-LP LH
10 A
Left-hand headlights
4
H-LP RH
10 A
Right-hand headlights
5
STA
7.5 A
Multi-mode manual transmission,
multiport fuel injection system/
sequential multiport fuel injection
system
6
EFI NO.2
7.5 A
Multiport fuel injection system/
sequential multiport fuel injection
system, multi-mode manual trans-
mission
7
MET
5 A
Gauges and meters
8
SUB-LP
30 A
DRL, FOG FR fuses
9
ABS NO.2
*
1
25 A
Anti-lock brake system
VSC NO.2
*
2
30 A
Anti-lock brake system and vehicle
stability control system
286
4-3. Do-it-yourself maintenance
AYGO_WE_99G80E
*
1
:
Vehicles without VSC system
*
2
:
Vehicles with VSC system
*
3
:
Replace the fuse with one of the same ampere rating as the original
10
AM2
30 A
Starting system, IG1, IG2, STA
fuses
11
HAZARD
10 A
Turn signal lights, emergency
flashers, gauges and meters
12
H-LP MAIN
20 A
H-LP LH, H-LP RH fuses
13
DOME
15 A
Gauges and meters, interior light,
audio system, tachometer
14
EFI
15 A
Electric cooling fan, multiport fuel
injection system/sequential multi-
port fuel injection system
15
HORN
10 A
Horn
16
SPARE
7.5 A
Spare fuse
17
SPARE
10 A
Spare fuse
18
SPARE
15 A
Spare fuse
19
AMT
50 A
Multi-mode manual transmission
20
RADIATOR
30 A
*
3
Electric cooling fan
40 A
*
3
21
ABS
*
1
40 A
Anti-lock brake system
VSC
*
2
50 A
Anti-lock brake system and vehicle
stability control system
22
EMPS
50 A
Electric power steering system
Fuse
Ampere
Circuit
287
4-3. Do-it-yourself maintenance
4
Maintenance and care
AYGO_WE_99G80E
Engine compartment (back side)
Fuse
Ampere
Circuit
1
ALTERNATOR
120 A
Charging system, EMPS, ABS,
VSC, RADIATOR, AM1, HTR,
PWR, D/L, DEF, TAIL, STOP, OBD,
ECU-B fuses
288
4-3. Do-it-yourself maintenance
AYGO_WE_99G80E
Instrument panel (right side)
Fuse
Ampere
Circuit
1
STOP
10 A
Stop lights, high mounted stoplight,
anti-lock brake system, multi-mode
manual transmission
2
D/L
25 A
Power door lock system, wireless
remote control system
3
DEF
20 A
Rear window defogger
4
TAIL
7.5 A
Daytime running light system, tail
lights, license plate lights, position
lights, headlight beam level control
system, instrument panel lights
5
OBD
7.5 A
On-board diagnosis system
6
ECU-B
7.5 A
Multi-mode manual transmission,
daytime running light system, vehi-
cle stability control system, gauges
and meters, rear fog light
289
4-3. Do-it-yourself maintenance
4
Maintenance and care
AYGO_WE_99G80E
Instrument panel (left side)
Fuse
Ampere
Circuit
1
ECU-IG
7.5 A
Anti-lock brake system, vehicle sta-
bility control system, electric power
steering system, electric cooling fan
2
BACK UP
10 A
Back-up lights, power door lock
system, wireless remote control
system, power windows, rear win-
dow defogger, tachometer, air con-
ditioning system, heater system
3
WIP
20 A
Windshield wiper and washer, rear
window wiper and washer
4
ACC
15 A
Power outlet, audio system
5
IG1
7.5 A
Windshield wiper and washer, rear
window wiper and washer, anti-lock
brake system, electric power steer-
ing system, electric cooling fan,
back-up lights, power door lock
system, wireless remote control
system, power windows, rear win-
dow defogger, tachometer, air con-
ditioning system, heater system
6
IG2
15 A
Multiport fuel injection system/
sequential multiport fuel injection
system, SRS airbag system,
gauges and meters, daytime run-
ning light system, multi-mode man-
ual transmission
290
4-3. Do-it-yourself maintenance
AYGO_WE_99G80E
Instrument panel (back side)
7
A/C
7.5 A
Air conditioning system, power
heater
Fuse
Ampere
Circuit
1
AM1
40 A
ACC, WIP, ECU-IG, BACK UP
fuses
2
PWR
30 A
Power windows
3
HTR
40 A
Heater system, air conditioning
system, A/C fuse
Fuse
Ampere
Circuit
291
4-3. Do-it-yourself maintenance
4
Maintenance and care
AYGO_WE_99G80E
After a fuse is replaced
If the lights do not turn on even after the fuse has been replaced, a bulb
may need replacement. (
P. 292)
If the replaced fuse blows again, have the vehicle inspected by any
authorized Toyota dealer or repairer, or another duly qualified and
equipped professional.
If there is an overload in a circuit
The fuses are designed to blow, protecting the wiring harness from damage.
CAUTION
To prevent system breakdowns and vehicle fire
Observe the following precautions.
Failure to do so may cause damage to the vehicle, and possibly a fire or
injury.
Never use a fuse of a higher amperage rating than that indicated, or use
any other object in place of a fuse.
Always use a genuine Toyota fuse or equivalent.
Never replace a fuse with a wire, even as a temporary fix.
Do not modify the fuses or fuse boxes.
NOTICE
Before replacing fuses
Have the cause of electrical overload determined and repaired by any autho-
rized Toyota dealer or repairer, or another duly qualified and equipped pro-
fessional as soon as possible.