Toyota Yaris - 2015 Fuse Box Diagram

Toyota Yaris - 2015 Fuse Box Diagram

325
7-3. Do-it-yourself maintenance
7
Maintenance and care
Do-it-yourself service precautions
If you perform maintenance by yourself, be sure to follow the
correct procedure as given in these sections.
Items
Parts and tools
Battery condition
(
P. 342)
Warm water
Baking soda
• Grease
Conventional wrench (for terminal clamp bolts)
Distilled water
Engine coolant
level (
P. 340)
• “Toyota Super Long Life Coolant” or a similar high
quality ethylene glycol-based non-silicate, non-
amine, non-nitrite and non-borate coolant with long-
life hybrid organic acid technology
“Toyota Super Long Life Coolant” is pre-mixed with
50% coolant and 50% deionized water.
Funnel (used only for adding coolant)
Engine oil level
(
P. 335)
“Toyota Genuine Motor Oil” or equivalent
Rag or paper towel
Funnel (used only for adding engine oil)
Fuses
(
P. 370)
Fuse with same amperage rating as original
Light bulbs
(
P. 376)
Bulb with same number and wattage rating as origi-
nal
Phillips-head screwdriver
Flathead screwdriver
• Wrench
Radiator, condenser
and intercooler
(
P. 341)
Tire inflation
pressure
(
P. 360)
Tire pressure gauge
Compressed air source
Washer fluid
(
P. 345)
Water or washer fluid containing antifreeze (for win-
ter use)
Funnel (used only for adding water or washer fluid)
332
7-3. Do-it-yourself maintenance
Engine compartment
1KR-FE engine
Fuse boxes
(
P. 370)
Engine oil level dipstick
(
P. 335)
Engine oil filler cap
(
P. 337)
Battery
(
P. 342)
Engine coolant reservoir
(
P. 340)
Electric cooling fan
Condenser
(
P. 341)
Radiator
(
P. 341)
Washer fluid tank (
P. 345)
1
2
3
4
5
6
7
8
9
333
7-3. Do-it-yourself maintenance
7
Maintenance and care
1NR-FE engine
Fuse boxes
(
P. 370)
Engine oil filler cap
(
P. 337)
Engine oil level dipstick
(
P. 335)
Battery
(
P. 342)
Engine coolant reservoir
(
P. 340)
Electric cooling fan
Condenser
(
P. 341)
Radiator
(
P. 341)
Washer fluid tank (
P. 345)
1
2
3
4
5
6
7
8
9
334
7-3. Do-it-yourself maintenance
1ND-TV engine
D
Fuse boxes
(
P. 370)
Engine oil filler cap
(
P. 337)
Engine oil level dipstick
(
P. 335)
Fuel filter
(
P. 346)
Battery
(
P. 342)
Intercooler
(
P. 341)
Electric cooling fan
Condenser
(
P. 341)
Radiator
(
P. 341)
Engine coolant reservoir
(
P. 340)
Washer fluid tank (
P. 345)
1
2
3
4
5
6
7
8
9
10
11
370
7-3. Do-it-yourself maintenance
Checking and replacing fuses
Turn the engine switch to the “LOCK” position (vehicles without a
smart entry & start system) or off (vehicles with a smart entry & start
system).
Open the fuse box cover.
Engine compartment: type A and B fuse boxes
Type A fuse box
Push the tab in and lift the lid off.
Type B fuse box
Push the tab in and lift the lid off.
If any of the electrical components do not operate, a fuse may
have blown. If this happens, check and replace the fuses as nec-
essary.
1
2
1
2
371
7-3. Do-it-yourself maintenance
7
Maintenance and care
Engine compartment: type C fuse box (left-hand drive vehicles)
Pull the rubber strip on the
edge to unhook it from the
cover, and then push the
tabs in and lift the cover off.
Remove the battery terminal
cover and then the fuse box
cover.
Engine compartment: type C fuse box (right-hand drive vehicles)
Pull the rubber strip on the
edge to unhook it from the
cover, and then push the
tabs in and lift the cover off.
Remove the battery terminal
cover and then the fuse box
cover.
1
2
1
2
372
7-3. Do-it-yourself maintenance
Instrument panel (left-hand drive vehicles)
Remove the lid.
Instrument panel (right-hand drive vehicles)
Remove the cover.
Do not pull off the cover using
excessive force as it is attached
to the footwell light.
Remove the lid.
Remove the fuse with the pull-
out tool.
Only type A fuse can be removed
using the pullout tool.
1
2
3
373
7-3. Do-it-yourself maintenance
7
Maintenance and care
Check if the fuse is blown.
Normal fuse
Blown fuse
From Type A to F:
Replace the blown fuse with a new fuse of an appropriate amperage rat-
ing. The amperage rating can be found on the fuse box lid.
Type G:
Contact any authorized Toyota dealer or repairer, or another duly qualified
and equipped professional.
4
1
2
Type A
Type B
Type C
Type D
374
7-3. Do-it-yourself maintenance
After a fuse is replaced
If the lights do not turn on even after the fuse has been replaced, a bulb may
need replacement. (
P. 376)
If the replaced fuse blows again, have the vehicle inspected by any autho-
rized Toyota dealer or repairer, or another duly qualified and equipped pro-
fessional.
If there is an overload in a circuit
The fuses are designed to blow, protecting the wiring harness from damage.
When replacing light bulbs
Toyota recommends that you use genuine Toyota products designed for this
vehicle. Because certain bulbs are connected to circuits designed to prevent
overload, non-genuine parts or parts not designed for this vehicle may be
unusable.
Type E
Type F
Type G
375
7-3. Do-it-yourself maintenance
7
Maintenance and care
When reinstalling the cover (type C fuse box)
Left-hand drive vehicles
Right-hand drive vehicles
Reinstall the cover, and then hook the
rubber strip’s groove onto the cover.
Reinstall the cover, and then hook the
rubber strip’s groove onto the cover.
WARNING
To prevent system breakdowns and vehicle fire
Observe the following precautions.
Failure to do so may cause damage to the vehicle, and possibly a fire or
injury.
Never use a fuse of a higher amperage rating than that indicated, or use
any other object in place of a fuse.
Always use a genuine Toyota fuse or equivalent.
Never replace a fuse with a wire, even as a temporary fix.
Do not modify the fuses or fuse boxes.
NOTICE
Before replacing fuses
Have the cause of electrical overload determined and repaired by any
authorized Toyota dealer or repairer, or another duly qualified and equipped
professional as soon as possible.
448
8-2. Steps to take in an emergency
If the engine will not start
One of the following may be the cause of the problem:
There may not be sufficient fuel in the vehicle’s tank.
Gasoline engine: Refuel the vehicle.
Diesel engine:
P. 462
The engine may be flooded. (gasoline engine)
Try to restart the engine again following correct starting procedures.
(
P. 182, 185)
There may be a malfunction in the engine immobilizer system.
(
P. 74)
One of the following may be the cause of the problem:
The battery may be discharged. (
P. 453)
The battery terminal connections may be loose or corroded.
The engine starting system may be malfunctioning due to an electrical
problem such as an open circuit or a blown fuse. However, an interim
measure is available to start the engine. (
P. 449)
If the engine will not start even though correct starting proce-
dures are being followed (
P. 182, 185), consider each of the fol-
lowing points:
The engine will not start even though the starter motor operates
normally.
The starter motor turns over slowly, the interior lights and head-
lights are dim, or the horn does not sound or sounds at a low
volume.
The starter motor does not turn over (vehicles with a smart entry
& start system).
325
7-3. Do-it-yourself maintenance
7
Maintenance and care
Do-it-yourself service precautions
If you perform maintenance by yourself, be sure to follow the
correct procedure as given in these sections.
Items
Parts and tools
Battery condition
(
P. 342)
Warm water
Baking soda
• Grease
Conventional wrench (for terminal clamp bolts)
Distilled water
Engine coolant
level (
P. 340)
• “Toyota Super Long Life Coolant” or a similar high
quality ethylene glycol-based non-silicate, non-
amine, non-nitrite and non-borate coolant with long-
life hybrid organic acid technology
“Toyota Super Long Life Coolant” is pre-mixed with
50% coolant and 50% deionized water.
Funnel (used only for adding coolant)
Engine oil level
(
P. 335)
“Toyota Genuine Motor Oil” or equivalent
Rag or paper towel
Funnel (used only for adding engine oil)
Fuses
(
P. 370)
Fuse with same amperage rating as original
Light bulbs
(
P. 376)
Bulb with same number and wattage rating as origi-
nal
Phillips-head screwdriver
Flathead screwdriver
• Wrench
Radiator, condenser
and intercooler
(
P. 341)
Tire inflation
pressure
(
P. 360)
Tire pressure gauge
Compressed air source
Washer fluid
(
P. 345)
Water or washer fluid containing antifreeze (for win-
ter use)
Funnel (used only for adding water or washer fluid)
332
7-3. Do-it-yourself maintenance
Engine compartment
1KR-FE engine
Fuse boxes
(
P. 370)
Engine oil level dipstick
(
P. 335)
Engine oil filler cap
(
P. 337)
Battery
(
P. 342)
Engine coolant reservoir
(
P. 340)
Electric cooling fan
Condenser
(
P. 341)
Radiator
(
P. 341)
Washer fluid tank (
P. 345)
1
2
3
4
5
6
7
8
9
333
7-3. Do-it-yourself maintenance
7
Maintenance and care
1NR-FE engine
Fuse boxes
(
P. 370)
Engine oil filler cap
(
P. 337)
Engine oil level dipstick
(
P. 335)
Battery
(
P. 342)
Engine coolant reservoir
(
P. 340)
Electric cooling fan
Condenser
(
P. 341)
Radiator
(
P. 341)
Washer fluid tank (
P. 345)
1
2
3
4
5
6
7
8
9
334
7-3. Do-it-yourself maintenance
1ND-TV engine
D
Fuse boxes
(
P. 370)
Engine oil filler cap
(
P. 337)
Engine oil level dipstick
(
P. 335)
Fuel filter
(
P. 346)
Battery
(
P. 342)
Intercooler
(
P. 341)
Electric cooling fan
Condenser
(
P. 341)
Radiator
(
P. 341)
Engine coolant reservoir
(
P. 340)
Washer fluid tank (
P. 345)
1
2
3
4
5
6
7
8
9
10
11
370
7-3. Do-it-yourself maintenance
Checking and replacing fuses
Turn the engine switch to the “LOCK” position (vehicles without a
smart entry & start system) or off (vehicles with a smart entry & start
system).
Open the fuse box cover.
Engine compartment: type A and B fuse boxes
Type A fuse box
Push the tab in and lift the lid off.
Type B fuse box
Push the tab in and lift the lid off.
If any of the electrical components do not operate, a fuse may
have blown. If this happens, check and replace the fuses as nec-
essary.
1
2
1
2
371
7-3. Do-it-yourself maintenance
7
Maintenance and care
Engine compartment: type C fuse box (left-hand drive vehicles)
Pull the rubber strip on the
edge to unhook it from the
cover, and then push the
tabs in and lift the cover off.
Remove the battery terminal
cover and then the fuse box
cover.
Engine compartment: type C fuse box (right-hand drive vehicles)
Pull the rubber strip on the
edge to unhook it from the
cover, and then push the
tabs in and lift the cover off.
Remove the battery terminal
cover and then the fuse box
cover.
1
2
1
2
372
7-3. Do-it-yourself maintenance
Instrument panel (left-hand drive vehicles)
Remove the lid.
Instrument panel (right-hand drive vehicles)
Remove the cover.
Do not pull off the cover using
excessive force as it is attached
to the footwell light.
Remove the lid.
Remove the fuse with the pull-
out tool.
Only type A fuse can be removed
using the pullout tool.
1
2
3
373
7-3. Do-it-yourself maintenance
7
Maintenance and care
Check if the fuse is blown.
Normal fuse
Blown fuse
From Type A to F:
Replace the blown fuse with a new fuse of an appropriate amperage rat-
ing. The amperage rating can be found on the fuse box lid.
Type G:
Contact any authorized Toyota dealer or repairer, or another duly qualified
and equipped professional.
4
1
2
Type A
Type B
Type C
Type D
374
7-3. Do-it-yourself maintenance
After a fuse is replaced
If the lights do not turn on even after the fuse has been replaced, a bulb may
need replacement. (
P. 376)
If the replaced fuse blows again, have the vehicle inspected by any autho-
rized Toyota dealer or repairer, or another duly qualified and equipped pro-
fessional.
If there is an overload in a circuit
The fuses are designed to blow, protecting the wiring harness from damage.
When replacing light bulbs
Toyota recommends that you use genuine Toyota products designed for this
vehicle. Because certain bulbs are connected to circuits designed to prevent
overload, non-genuine parts or parts not designed for this vehicle may be
unusable.
Type E
Type F
Type G
375
7-3. Do-it-yourself maintenance
7
Maintenance and care
When reinstalling the cover (type C fuse box)
Left-hand drive vehicles
Right-hand drive vehicles
Reinstall the cover, and then hook the
rubber strip’s groove onto the cover.
Reinstall the cover, and then hook the
rubber strip’s groove onto the cover.
WARNING
To prevent system breakdowns and vehicle fire
Observe the following precautions.
Failure to do so may cause damage to the vehicle, and possibly a fire or
injury.
Never use a fuse of a higher amperage rating than that indicated, or use
any other object in place of a fuse.
Always use a genuine Toyota fuse or equivalent.
Never replace a fuse with a wire, even as a temporary fix.
Do not modify the fuses or fuse boxes.
NOTICE
Before replacing fuses
Have the cause of electrical overload determined and repaired by any
authorized Toyota dealer or repairer, or another duly qualified and equipped
professional as soon as possible.