Toyota Prius Hybrid - 2016 Fuse Box Diagram

Toyota Prius Hybrid - 2016 Fuse Box Diagram

517
6-3. Do-it-yourself maintenance
PRIUS_OM_OM47B41E_(EE)
6
Maintenance and care
Do-it-yourself service precautions
If you perform maintenance by yourself, be sure to follow the
correct procedure as given in these sections.
Items
Parts and tools
12-volt battery
condition
(
P. 530)
Warm water
Baking soda
• Grease
Conventional wrench (for terminal clamp bolts)
Distilled water
Engine/power
control unit
coolant level
(
P. 527)
• “Toyota Super Long Life Coolant” or a similar high
quality ethylene glycol-based non-silicate, non-
amine, non-nitrite and non-borate coolant with long-
life hybrid organic acid technology
“Toyota Super Long Life Coolant” is pre-mixed with
50% coolant and 50% deionized water.
Funnel (used only for adding coolant)
Engine oil level
(
P. 524)
“Toyota Genuine Motor Oil” or equivalent
Rag or paper towel
Funnel (used only for adding engine oil)
Fuses (
P. 565)
Fuse with same amperage rating as original
Light bulbs
(
P. 569)
Bulb with same number and wattage rating as origi-
nal
Phillips-head screwdriver
Flathead screwdriver
• Wrench
Radiator and
condenser
(
P. 529)
Tire inflation
pressure
(
P. 550)
Tire pressure gauge
Compressed air source
Washer fluid
(
P. 535)
Water or washer fluid containing antifreeze (for win-
ter use)
Funnel (used only for adding water or washer fluid)
523
6-3. Do-it-yourself maintenance
PRIUS_OM_OM47B41E_(EE)
6
Maintenance and care
Engine compartment
Engine coolant reservoir
(
P. 527)
Fuse boxes
(
P. 565)
Engine oil level dipstick
(
P. 524)
Engine oil filler cap
(
P. 525)
12-volt battery
(
P. 530)
Power control unit coolant
reservoir
(
P. 527)
Radiator
(
P. 529)
Condenser
(
P. 529)
Electric cooling fans
Washer fluid tank
(
P. 535)
1
2
3
4
5
6
7
8
9
10
565
6-3. Do-it-yourself maintenance
PRIUS_OM_OM47B41E_(EE)
6
Maintenance and care
Checking and replacing fuses
Turn the power switch off.
Open the fuse box cover.
X
Engine compartment type A fuse box
While pushing the 2 claws, lift
up the cover.
When closing the cover, make
sure to attach the 2 claws.
X
Engine compartment type B fuse box
While pushing the 3 claws, lift
up the cover.
When closing the cover, make
sure to attach the 3 claws.
X
Left side instrument panel (left-hand drive vehicles)
Remove the lid.
Make sure to press the claw
during removal or installation.
If any of the electrical components do not operate, a fuse may
have blown. If this happens, check and replace the fuses as nec-
essary.
1
2
566
6-3. Do-it-yourself maintenance
PRIUS_OM_OM47B41E_(EE)
X
Left side instrument panel (right-hand drive vehicles)
Push the tab in and remove
the cover.
Unplug the connector while
pressing the lock release.
Remove the lid.
Make sure to press the claw
during removal or installation.
Remove the fuse.
Only type A fuse can be
removed using the pullout tool.
1
2
3
3
567
6-3. Do-it-yourself maintenance
PRIUS_OM_OM47B41E_(EE)
6
Maintenance and care
Check if the fuse is blown.
Normal fuse
Blown fuse
Replace the blown fuse with a new fuse of an appropriate amperage rat-
ing. The amperage rating can be found on the fuse box lid.
4
1
2
X
Type A
X
Type B
X
Type C
568
6-3. Do-it-yourself maintenance
PRIUS_OM_OM47B41E_(EE)
After a fuse is replaced
If the lights do not turn on even after the fuse has been replaced, a bulb may
need replacement. (
P. 569)
If the replaced fuse blows again, have the vehicle inspected by any autho-
rized Toyota dealer or repairer, or another duly qualified and equipped pro-
fessional.
If there is an overload in a circuit
The fuses are designed to blow, protecting the wiring harness from damage.
When replacing light bulbs
Toyota recommends that you use genuine Toyota products designed for this
vehicle. Because certain bulbs are connected to circuits designed to prevent
overload, non-genuine parts or parts not designed for this vehicle may be
unusable.
WARNING
To prevent system breakdowns and vehicle fire
Observe the following precautions.
Failure to do so may cause damage to the vehicle, and possibly a fire or
injury.
Never use a fuse of a higher amperage rating than that indicated, or use
any other object in place of a fuse.
Always use a genuine Toyota fuse or equivalent.
Never replace a fuse with a wire, even as a temporary fix.
Do not modify the fuses or fuse boxes.
NOTICE
Before replacing fuses
Have the cause of electrical overload determined and repaired by any
authorized Toyota dealer or repairer, or another duly qualified and equipped
professional as soon as possible.