Toyota Hilux - 2017 Fuse Box Diagram

Toyota Hilux - 2017 Fuse Box Diagram

480
6-4. Using the other interior features
The power outlet can be used when:
X
Vehicles without smart entry & start system
12 V DC: The engine switch is in the “ACC” or “ON” position.
220 V AC: The engine switch is in the “ON” position.
X
Vehicles with smart entry & start system
12 V DC: The engine switch is in ACCESSORY or IGNITION ON mode.
220 V AC: The engine switch is in IGNITION ON mode.
Vehicles with Stop & Start system: When the engine restarts after having
been stopped by the Stop & Start system, the power outlet may be tempo-
rarily unusable, but this is not a malfunction.
NOTICE
To avoid damaging the power outlets, close the power outlet lid when the
power outlet is not in use.
Foreign objects or liquids that enter the power outlet may cause a short
circuit.
To prevent blown fuse:
X
12 V DC
Do not use an accessory that uses more than 12 V 10 A.
X
220 V AC
Do not use a 220 V AC appliance that requires more than 100 W.
If a 220 V AC appliance that consumes more than 100 W is used, the pro-
tection circuit will cut the power supply.
To prevent battery discharge, do not use the power outlet longer than nec-
essary when the engine is not running.
The following 220 V AC appliances may not operate properly even if their
power consumption is under 100 W:
Appliances with high initial peak wattage
Measuring devices that process precise data
Other appliances that require an extremely stable power supply
495
7-3. Do-it-yourself maintenance
7
Maintenance and care
Do-it-yourself service precautions
If you perform maintenance by yourself, be sure to follow the
correct procedure as given in these sections.
Items
Parts and tools
Battery condition
(
P. 507)
Warm water
Baking soda
• Grease
Conventional wrench (for terminal clamp bolts)
Distilled water
Engine coolant
level (
P. 505)
• “Toyota Super Long Life Coolant” or a similar high
quality ethylene glycol-based non-silicate, non-
amine, non-nitrite and non-borate coolant with long-
life hybrid organic acid technology
“Toyota Super Long Life Coolant” is pre-mixed with
50% coolant and 50% deionized water.
Funnel (used only for adding coolant)
Engine oil level
(
P. 502)
“Toyota Genuine Motor Oil” or equivalent
Rag or paper towel
Funnel (used only for adding engine oil)
Fuses (
P. 535)
Fuse with same amperage rating as original
Light bulbs
(
P. 540)
Bulb with same number and wattage rating as origi-
nal
Phillips-head screwdriver
Flathead screwdriver
• Wrench
Radiator,
condenser and
intercooler
(if equipped)
(
P. 506)
Tire inflation
pressure
(
P. 526)
Tire pressure gauge
Compressed air source
Washer fluid
(
P. 511)
Water or washer fluid containing antifreeze (for win-
ter use)
Funnel (used only for adding water or washer fluid)
499
7-3. Do-it-yourself maintenance
7
Maintenance and care
Engine compartment
X
2TR-FE engine
Engine coolant reservoir
(
P. 505)
Engine oil level dipstick
(
P. 502)
Engine oil filler cap(
P. 503)
Fuse box
(
P. 535)
Battery
(
P. 507)
Washer fluid tank
(
P. 511)
Condenser
(
P. 506)
Radiator
(
P. 506)
1
2
3
4
5
6
7
8
500
7-3. Do-it-yourself maintenance
X
1GD-FTV and 2GD-FTV engines
Battery (if equipped)
(
P. 507)
Engine coolant reservoir
(
P. 505)
Engine oil filler cap(
P. 503)
Engine oil level dipstick
(
P. 502)
AdBlue™ tank cap
(if equipped)
(
P. 513)
Fuel filter
(
P. 512, 616)
Fuse box
(
P. 535)
Battery
(
P. 507)
Washer fluid tank
(
P. 511)
Intercooler
(
P. 506)
Radiator
(
P. 506)
Condenser (if equipped)
(
P. 506)
1
2
3
4
5
6
7
8
9
10
11
12
501
7-3. Do-it-yourself maintenance
7
Maintenance and care
X
2KD-FTV engine
Battery (if equipped)
(
P. 507)
Engine coolant reservoir
(
P. 505)
Engine oil filler cap(
P. 503)
Engine oil level dipstick
(
P. 502)
Fuel filter
(
P. 512, 616)
Fuse box
(
P. 535)
Battery
(
P. 507)
Washer fluid tank
(
P. 511)
Condenser
(
P. 506)
Radiator
(
P. 506)
1
2
3
4
5
6
7
8
9
10
535
7-3. Do-it-yourself maintenance
7
Maintenance and care
Checking and replacing fuses
Vehicles without smart entry & start system:
Turn the engine switch to the “LOCK” position.
Vehicles with smart entry & start system:
Turn the engine switch off.
Open the fuse box cover.
X
In the engine compartment
Push the tab in and pull the lock
release, and lift the lid off.
X
Under the instrument panel (left-hand drive vehicles)
Remove the lid.
If any of the electrical components do not operate, a fuse may
have blown. If this happens, check and replace the fuses as nec-
essary.
1
2
537
7-3. Do-it-yourself maintenance
7
Maintenance and care
X
Behind the cowl side panel
Remove the driver’s door scuff
plate (left-hand drive vehicles)
or the front passenger’s door
scuff plate (right-hand drive
vehicles).
Remove the nut and the cowl
side panel.
Remove the fuse.
Only type A fuse can be
removed using the pullout tool.
3
538
7-3. Do-it-yourself maintenance
Check if the fuse is blown.
Normal fuse
Blown fuse
Type A, B, C and D:
Replace the blown fuse with a new fuse of an appropriate amperage rat-
ing. The amperage rating can be found on the fuse box lid.
Type E:
Contact any authorized Toyota dealer or repairer, or another duly qualified
and equipped professional.
4
1
2
X
Type A
X
Type B
X
Type C
X
Type D
X
Type E
539
7-3. Do-it-yourself maintenance
7
Maintenance and care
After a fuse is replaced
If the lights do not turn on even after the fuse has been replaced, a bulb may
need replacement. (
P. 540)
If the replaced fuse blows again, have the vehicle inspected by any autho-
rized Toyota dealer or repairer, or another duly qualified and equipped pro-
fessional.
If there is an overload in a circuit
The fuses are designed to blow, protecting the wiring harness from damage.
WARNING
To prevent system breakdowns and vehicle fire
Observe the following precautions.
Failure to do so may cause damage to the vehicle, and possibly a fire or
injury.
Never use a fuse of a higher amperage rating than that indicated, or use
any other object in place of a fuse.
Always use a genuine Toyota fuse or equivalent.
Never replace a fuse with a wire, even as a temporary fix.
Do not modify the fuses or fuse boxes.
NOTICE
Before replacing fuses
Have the cause of electrical overload determined and repaired by any
authorized Toyota dealer or repairer, or another duly qualified and equipped
professional as soon as possible.
601
8-2. Steps to take in an emergency
8
When trouble arises
If the engine will not start
One of the following may be the cause of the problem:
There may not be sufficient fuel in the vehicle’s tank.
Gasoline engine: Refuel the vehicle.
Diesel engine:
P. 616
The engine may be flooded. (gasoline engine)
Try to restart the engine again following correct starting procedures.
(
P. 236, 239)
There may be a malfunction in the engine immobilizer system.
(if equipped:
P. 107)
One of the following may be the cause of the problem:
The battery may be discharged. (
P. 607)
The battery terminal connections may be loose or corroded.
The engine starting system may be malfunctioning due to an electrical
problem such as an open circuit or a blown fuse. However, an interim
measure is available to start the engine. (
P. 602)
If the engine will not start even though correct starting proce-
dures are being followed (
P. 236, 239), consider each of the
following points:
The engine will not start even though the starter motor operates
normally.
The starter motor turns over slowly, the interior lights and head-
lights are dim, or the horn does not sound or sounds at a low
volume.
The starter motor does not turn over (vehicles with smart entry &
start system).