Toyota Yaris Hatchback - 2017 Fuse Box Diagram

Toyota Yaris Hatchback - 2017 Fuse Box Diagram

237
6-3. Do-it-yourself maintenance
6
Maintenance and care
Fuses
(
P. 273)
Fuse with same amperage rating as original
Light bulbs
(
P. 278)
Bulb with same number and wattage rating as origi-
nal
Phillips-head screwdriver
Flathead screwdriver
• Wrench
Radiator and
condenser
(
P. 248)
Tire inflation
pressure
(
P. 261)
Tire pressure gauge
Compressed air source
Washer fluid
(
P. 251)
Water or washer fluid containing antifreeze (for win-
ter use)
Funnel (used only for adding water or washer fluid)
Windshield wiper/
rear window wiper
• The wiper blades should not show any signs of
cracking, splitting, wear, contamination or deforma-
tion.
• The wiper blades should clear the windshield/rear
window without streaking or skipping.
Items
Parts and tools
243
6-3. Do-it-yourself maintenance
6
Maintenance and care
Engine compartment
Fuse boxes
(
P. 273)
Engine oil filler cap
(
P. 245)
Battery
(
P. 249)
Brake fluid reservoir
(
P. 248)
Radiator
(
P. 248)
Condenser
(
P. 248)
Electric cooling fan
Engine coolant reservoir
(
P. 246)
Engine oil level dipstick
(
P. 244)
Washer fluid tank (
P. 251)
1
2
3
4
5
6
7
8
9
10
273
6-3. Do-it-yourself maintenance
6
Maintenance and care
Checking and replacing fuses
Turn the engine switch to the “LOCK” position.
Open the fuse box cover.
Engine compartment: type A and B fuse boxes
Type A fuse box
Push the tab in and lift the lid off.
Type B fuse box
Push the tab in and lift the lid off.
If any of the electrical components do not operate, a fuse may
have blown. If this happens, check and replace the fuses as nec-
essary.
1
2
1
2
274
6-3. Do-it-yourself maintenance
Engine compartment: type C fuse box
Pull the rubber strip on the
edge to unhook it from the
cover, and then push the
tabs in and lift the cover off.
Remove the battery terminal
cover and then the fuse box
cover.
Instrument panel
Remove the lid.
Remove the fuse with the pull-
out tool.
Only type A fuse can be removed
using the pullout tool.
1
2
3
275
6-3. Do-it-yourself maintenance
6
Maintenance and care
Check if the fuse is blown.
Normal fuse
Blown fuse
From Type A to E:
Replace the blown fuse with a new fuse of an appropriate amperage rat-
ing. The amperage rating can be found on the fuse box lid.
Type F:
Contact your Toyota dealer.
4
1
2
Type A
Type B
Type C
Type D
Type E
Type F
276
6-3. Do-it-yourself maintenance
After a fuse is replaced
If the lights do not turn on even after the fuse has been replaced, a bulb may
need replacement. (
P. 278)
If the replaced fuse blows again, have the vehicle inspected by your Toyota
dealer.
If there is an overload in a circuit
The fuses are designed to blow, protecting the wiring harness from damage.
When replacing light bulbs
Toyota recommends that you use genuine Toyota products designed for this
vehicle. Because certain bulbs are connected to circuits designed to prevent
overload, non-genuine parts or parts not designed for this vehicle may be
unusable.
When reinstalling the cover (type C fuse box)
Reinstall the cover, and then hook the
rubber strip’s groove onto the cover.
WARNING
To prevent system breakdowns and vehicle fire
Observe the following precautions.
Failure to do so may cause damage to the vehicle, and possibly a fire or
injury.
Never use a fuse of a higher amperage rating than that indicated, or use
any other object in place of a fuse.
Always use a genuine Toyota fuse or equivalent.
Never replace a fuse with a wire, even as a temporary fix.
Do not modify the fuses or fuse boxes.
277
6-3. Do-it-yourself maintenance
6
Maintenance and care
NOTICE
Before replacing fuses
Have the cause of electrical overload determined and repaired by your
Toyota dealer as soon as possible.