Toyota Corolla iM - 2017 Fuse Box Diagram

Toyota Corolla iM - 2017 Fuse Box Diagram

233
6
Maintenance and care
6-3. Do-it-yourself maintenance
Do-it-yourself service precautions
If you perform maintenance by yourself, be sure to follow the
correct procedure as given in these sections.
Items
Parts and tools
Battery condition
(
P. 246)
Warm water
Baking soda
• Grease
Conventional wrench (for terminal clamp bolts)
Brake fluid level
(
P. 244)
FMVSS No.116 DOT 3 or SAE J1703 brake fluid
Rag or paper towel
Funnel (used only for adding brake fluid)
Engine
coolant
level (
P. 242)
• “Toyota Super Long Life Coolant” or a similar high
quality ethylene glycol-based non-silicate, non-
amine, non-nitrite and non-borate coolant with long-
life hybrid organic acid technology
For the U.S.A.:
“Toyota Super Long Life Coolant” is pre-mixed with
50% coolant and 50% deionized water.
For Canada:
“Toyota Super Long Life Coolant” is pre-mixed with
55% coolant and 45% deionized water.
Funnel (used only for adding engine coolant)
Engine oil level
(
P. 239)
“Toyota Genuine Motor Oil” or equivalent
Rag or paper towel
Funnel (used only for adding engine oil)
Fuses (
P. 269)
Fuse with same amperage rating as original
Light bulbs
(
P. 272)
Bulb with same number and wattage rating as origi-
nal
Phillips-head screwdriver
Flathead screwdriver
• Wrench
Radiator and con-
denser (
P. 244)
Tire
inflation
pressure
(
P. 260)
Tire pressure gauge
Compressed air source
Washer fluid
(
P. 249)
Water or washer fluid containing antifreeze (for win-
ter use)
Funnel (used only for adding water or washer fluid)
238
6-3. Do-it-yourself maintenance
Engine compartment
Washer fluid tank
(
P. 249)
Engine coolant reservoir
(
P. 242)
Engine oil filler cap
(
P. 240)
Engine oil level dipstick
(
P. 239)
Brake fluid reservoir
(
P. 244)
Battery
(
P. 246)
Fuse box
(
P. 269)
Electric cooling fan
Condenser
(
P. 244)
Radiator
(
P. 244)
1
2
3
4
5
6
7
8
9
10
269
6-3. Do-it-yourself maintenance
6
Maintenance and care
Turn the engine switch off.
Open the fuse box cover.
X
Engine compartment
Push the tab in and lift the lid
off.
X
Under the driver’s side instrument panel
Remove the lid.
Remove the fuse with the pull-
out tool.
Only type A fuses can be removed
using the pullout tool.
Checking and replacing fuses
If any of the electrical components do not operate, a fuse may
have blown. If this happens, check and replace the fuses as nec-
essary.
1
2
3
270
6-3. Do-it-yourself maintenance
Check if the fuse is blown.
Normal fuse
Blown fuse
Type A, B and C:
Replace the blown fuse with a new fuse of an appropriate amperage rat-
ing. The amperage rating can be found on the fuse box lid.
Type D:
Contact your Toyota dealer.
4
1
2
X
Type A
X
Type B
X
Type C
X
Type D
271
6-3. Do-it-yourself maintenance
6
Maintenance and care
After a fuse is replaced
If the lights do not turn on even after the fuse has been replaced, a bulb may
need replacement. (
P. 272)
If the replaced fuse blows again, have the vehicle inspected by your Toyota
dealer.
If there is an overload in a circuit
The fuses are designed to blow, protecting the wiring harness from damage.
WARNING
To prevent system breakdowns and vehicle fire
Observe the following precautions.
Failure to do so may cause damage to the vehicle, and possibly a fire or
injury.
Never use a fuse of a higher amperage rating than that indicated, or use
any other object in place of a fuse.
Always use a genuine Toyota fuse or equivalent.
Never replace a fuse with a wire, even as a temporary fix.
Do not modify the fuses or fuse boxes.
NOTICE
Before replacing fuses
Have the cause of electrical overload determined and repaired by your
Toyota dealer as soon as possible.