Toyota Camry - 2014 Fuse Box Diagram

Toyota Camry - 2014 Fuse Box Diagram

392
3-5. Other interior features
NOTICE
To avoid damaging the power outlet
Close the power outlet lid when the power outlet is not in use.
Foreign objects or liquids that enter the power outlet may cause a short cir-
cuit.
To prevent blown fuse
Do not use an accessory that uses more than 12 V 10 A.
To prevent battery discharge
Do not use the power outlet longer than necessary when the engine is not
running.
435
4-3. Do-it-yourself maintenance
4
Maintenance and care
Items
Parts and tools
Engine oil level
(→
P. 442)
• “Toyota Genuine Motor Oil” or
equivalent
• Rag or paper towel
• Funnel (used only for adding
engine oil)
Fuses
(
P. 474)
Fuse with same amperage rating
as original
Light bulbs
(
P. 486)
• Bulb with same number and watt-
age rating as original
• Phillips-head screwdriver
• Flathead screwdriver
• Wrench
Radiator and condenser
(
P. 448)
Tire inflation pressure (
P. 460)
• Tire pressure gauge
• Compressed air source
Washer fluid
(
P. 453)
• Water or washer fluid containing
antifreeze (for winter use)
• Funnel (used only for adding
water or washer fluid)
440
4-3. Do-it-yourself maintenance
Engine compartment
2.5 L 4-cylinder (2AR-FE) engine
Engine oil filler cap
(
P. 444)
Engine oil level dipstick
(
P. 442)
Brake fluid reservoir
(
P. 449)
Fuse box
(
P. 474)
Battery
(
P. 450)
Radiator
(
P. 448)
Electric cooling fans
Condenser
(
P. 448)
Engine coolant reservoir
(
P. 447)
Washer fluid tank (
P. 453)
441
4-3. Do-it-yourself maintenance
4
Maintenance and care
3.5 L V6 (2GR-FE) engine
Engine oil filler cap
(
P. 444)
Engine oil level dipstick
(
P. 442)
Brake fluid reservoir
(
P. 449)
Fuse box
(
P. 474)
Battery
(
P. 450)
Radiator
(
P. 448)
Electric cooling fans
Condenser
(
P. 448)
Engine coolant reservoir
(
P. 447)
Washer fluid tank (
P. 453)
474
4-3. Do-it-yourself maintenance
Checking and replacing fuses
If any of the electrical components do not operate, a fuse may have
blown. If this happens, check and replace the fuses as necessary.
Vehicles without a smart key system: Turn the engine
switch off.
Vehicles with a smart key system: Turn the “ENGINE
START STOP” switch off.
Open the fuse box cover.
Engine compartment
Push the tabs in and lift the lid
off.
Under the instrument panel
Remove the lid.
After a system failure, see “Fuse layout and amperage rat-
ings” (
P. 477) for details about which fuse to check.
STEP
1
STEP
2
STEP
3
475
4-3. Do-it-yourself maintenance
4
Maintenance and care
Remove the fuse.
Only type A fuse can be
removed using the pullout
tool.
Check if the fuse has blown.
Type A
Normal fuse
Blown fuse
Replace the blown fuse with a
new fuse of an appropriate
amperage rating. The amper-
age rating can be found on the
fuse box lid.
Type B
Normal fuse
Blown fuse
Replace the blown fuse with a
new fuse of an appropriate
amperage rating. The amper-
age rating can be found on the
fuse box lid.
STEP
4
STEP
5
476
4-3. Do-it-yourself maintenance
Type C
Normal fuse
Blown fuse
Contact your Toyota dealer.
477
4-3. Do-it-yourself maintenance
4
Maintenance and care
Fuse layout and amperage ratings
Engine compartment
Fuse block
Fuse block on the back of the cover
478
4-3. Do-it-yourself maintenance
Fuse
Ampere
Circuit
1
METER-IG2
5 A
Gauge and meters
2
FAN*
1
50 A
Electric cooling fans
3
H-LP CLN
30 A
No circuit
4
HTR
50 A
Air conditioning system
5
ALT
120 A
Charging system
6
ABS NO.2
30 A
Vehicle stability control system
7
ST/AM2
30 A
Starter system, ECU-IG2 NO.1,
A/B, ECU-IG2 NO.2
8
H-LP-MAIN
30 A
H-LP LH-LO, H-LP RH-LO, MNL
H-LP LVL, headlights (low beam)
9
ABS NO.1
50 A
Vehicle stability control system
10
EPS
80 A
Electric power steering
11
S-HORN
7.5 A
S-HORN
12
HORN
10 A
Horns
13
EFI NO.2
15 A
Multiport fuel injection system/
sequential multiport fuel injection
system, electronic controlled trans-
mission
14
EFI NO.3
7.5 A*
2
Multiport fuel injection system/
sequential multiport fuel injection
system
10 A*
1
15
INJ
7.5 A
Multiport fuel injection system/
sequential multiport fuel injection
system
16
ECU-IG2 NO.3
7.5 A
Multiport fuel injection system/
sequential multiport fuel injection
system, steering lock system, elec-
tronic controlled transmission
17
IGN
15 A
Starter system
18
D/L-AM2
20 A
No circuit
479
4-3. Do-it-yourself maintenance
4
Maintenance and care
19
IG2-MAIN
25 A
IGN, INJ, METER-IG2, ECU-IG2
NO.3, A/B, ECU-IG2 NO.2, ECU-
IG2 NO.1
20
ALT-S
7.5 A
Charging system
21
MAYDAY
5 A
MAYDAY
22
TURN&HAZ
15 A
Turn signal lights, emergency
flashers, gauge and meters
23
STRG LOCK
10 A
Steering lock system
24
AMP
15 A
Audio system
25
H-LP LH-LO
15 A*
3
Left-hand headlight (low beam),
manual headlight leveling system
20 A*
4
26
H-LP RH-LO
15 A*
3
Right-hand headlight (low beam)
20 A*
4
27
MNL H-LP
LVL*
4
7.5 A
Manual headlight leveling system
28
EFI-MAIN NO.1
30 A
Multiport fuel injection system/
sequential multiport fuel injection
system, EFI NO.2, EFI NO.3, A/F
sensor
29
SMART
5 A
No circuit
30
ETCS
10 A
Electronic throttle control system
31
TOWING
20 A
No circuit
32
EFI NO.1
7.5 A
Multiport fuel injection system/
sequential multiport fuel injection
system, electronic controlled trans-
mission
33
EFI-MAIN
NO.2*
2
20 A
A/F sensor
A/F*
1
34
AM2
7.5 A
Smart key system
Fuse
Ampere
Circuit
480
4-3. Do-it-yourself maintenance
*
1
: 3.5 L V6 (2GR-FE) engine
*
2
: 2.5 L 4-cylinder (2AR-FE) engine
*
3
:
Vehicles with halogen headlight
*
4
:
Vehicles with discharge headlight
35
RADIO-B
20 A
Audio system, navigation system
36
DOME
7.5 A
Clock, vanity lights, interior lights,
personal lights, trunk light, door
courtesy lights
37
ECU-B NO.1
10 A
Multiplex communication system,
smart key system, gauge and
meters, tire pressure warning sys-
tem, wireless remote control, steer-
ing sensor, front passenger
occupant classification system,
Blind Spot Monitor
38
SPARE
25 A
Spare fuse
39
SPARE
30 A
Spare fuse
Fuse
Ampere
Circuit
481
4-3. Do-it-yourself maintenance
4
Maintenance and care
Under the instrument panel
Fuse
Ampere
Circuit
1
ECU-IG1 NO.2
10 A
Shift lock control system, seat
heaters, smart key system, tire
pressure warning system, wireless
remote control, multiplex communi-
cation system, audio system, navi-
gation system, moon roof, auto
anti-glare inside rear view mirror
2
ECU-IG1 NO.1
10 A
Vehicle stability control system,
electric cooling fans, steering sen-
sor, multiport fuel injection system/
sequential multiport fuel injection
system, charging system, rear win-
dow defogger, outside rear view
mirror defoggers, Blind Spot Moni-
tor
3
PANEL
10 A
Switch illumination, air condition-
ing system, shift lever light, glove
box light, interior lights, personal
lights, audio system, navigation
system
482
4-3. Do-it-yourself maintenance
4
TAIL
15 A
Parking lights, side marker lights,
tail lights, license plate lights, fog
lights
5
EPS-IG1
7.5 A
Electric power steering
6
ECU-IG1 NO.3
7.5 A
Blind Spot Monitor
7
S/HTR&FAN
F/L
10 A
Seat heaters
8
H-LP LVL
7.5 A
No circuit
9
WASHER
10 A
Windshield wipers and washer
10
A/C-IG1
7.5 A
Air conditioning system
11
WIPER
25 A
Windshield wipers and washer
12
BKUP LP
7.5 A
Back-up lights, multiport fuel injec-
tion system/sequential multiport
fuel injection system, electronic
controlled transmission, audio sys-
tem, navigation system
13
DOOR NO.1
30 A
Power windows
14
WIPER-S
5 A
No circuit
15
P/OUTLET RR
20 A
Power outlet
16
SFT LOCK-
ACC
5 A
Shift lock control system
17
DOOR R/R
20 A
Rear right-hand power windows
18
DOOR R/L
20 A
Rear left-hand power windows
19
OBD
10 A
On-Board diagnosis system
20
ECU-B NO.2
10 A
Smart key system, tire pressure
warning system
21
DOOR NO.2
20 A
Power windows
22
AM1
7.5 A
Multiport fuel injection system/
sequential multiport fuel injection
system, starter system
Fuse
Ampere
Circuit
483
4-3. Do-it-yourself maintenance
4
Maintenance and care
23
STOP
7.5 A
Tail lights, multiport fuel injection
system/sequential multiport fuel
injection system, vehicle stability
control system, anti-lock brake sys-
tem, electronic controlled transmis-
sion, high mounted stoplight, smart
key system, shift lock control sys-
tem
24
P/SEAT RR
30 A
No circuit
25
A/C-B
7.5 A
Air conditioning system
26
S/ROOF
10 A
Moon roof
27
P/SEAT FR
30 A
Power seats
28
PSB
30 A
No circuit
29
D/L-AM1
20 A
Multiplex communication system,
power door lock, trunk opener
switch
30
TI&TE
20 A
No circuit
31
A/B
10 A
Front passenger occupant classifi-
cation system, SRS airbag system
32
ECU-IG2 NO.1
7.5 A
Multiport fuel injection system/
sequential multiport fuel injection
system
33
ECU-IG2 NO.2
7.5 A
Smart key system, Blind Spot Mon-
itor
34
CIG&P/
OUTLET
15 A
Power outlet
35
ECU-ACC
7.5 A
Clock, outside rear view mirrors,
multiplex communication system,
audio system, navigation system
36
S/HTR&FAN F/
R
10 A
Seat heaters
37
S/HTR RR
20 A
No circuit
Fuse
Ampere
Circuit
484
4-3. Do-it-yourself maintenance
After a fuse is replaced
If the lights do not turn on even after the fuse has been replaced, a bulb
may need replacement. (
P. 486)
If the replaced fuse blows again, have the vehicle inspected by your
Toyota dealer.
If there is an overload in a circuit
The fuses are designed to blow, protecting the wiring harness from damage.
When replacing light bulbs
Toyota recommends that you use genuine Toyota products designed for this
vehicle. Because certain bulbs are connected to circuits designed to prevent
overload, non-genuine parts or parts not designed for this vehicle may be
unusable.
485
4-3. Do-it-yourself maintenance
4
Maintenance and care
CAUTION
To prevent system breakdowns and vehicle fire
Observe the following precautions.
Failure to do so may cause damage to the vehicle, and possibly a fire or
injury.
Never use a fuse of a higher amperage rating than that indicated, or use
any other object in place of a fuse.
Always use a genuine Toyota fuse or equivalent.
Never replace a fuse with a wire, even as a temporary fix.
Do not modify the fuses or fuse boxes.
NOTICE
Before replacing fuses
Have the cause of electrical overload determined and repaired by your
Toyota dealer as soon as possible.
5
When trouble arises
533
5-2. Steps to take in an emergency
Emergency start function (vehicles with a smart key system)
When the engine does not start, the following steps can be used as
an interim measure to start the engine if the “ENGINE START STOP”
switch is functioning normally:
Set the parking brake.
Shift the shift lever to P.
Set the “ENGINE START STOP” switch to ACCESSORY
mode.
Press and hold the “ENGINE START STOP” switch for about
15 seconds while depressing the brake pedal firmly.
Even if the engine can be started using the above steps, the system
may be malfunctioning. Have the vehicle inspected by your Toyota
dealer.
The starter motor does not turn over (vehicles with a smart
key system).
The engine starting system may be malfunctioning due to an
electrical problem such as an open circuit or a blown fuse. How-
ever, an interim measure is available to start the engine.
(
P. 533)
The starter motor does not turn over, the interior lights and
headlights do not turn on, or the horn does not sound.
One of the following may be the cause of the problem:
One or both of the battery terminals may be disconnected.
The battery may be discharged. (
P. 539)
There may be a malfunction in the steering lock system (vehi-
cles with a smart key system).
Contact your Toyota dealer if the problem cannot be repaired, or if
repair procedures are unknown.
STEP
1
STEP
2
STEP
3
STEP
4