Toyota 4Runner - 2015 Fuse Box Diagram

Toyota 4Runner - 2015 Fuse Box Diagram

315
5-4. Other interior features
5
Interior features
NOTICE
To avoid damaging the power outlet and the plug
Close the power outlet lid when not in use.
Do not allow foreign objects or liquids to enter the power outlet, as this
may cause a short circuit.
Do not use plug adaptors to connect too many plugs to the power outlet.
After removing a plug, gently close the power outlet lid.
To prevent the fuse from being blown
Do not use a 120 V AC appliance that requires more than the maximum
capacity of the power outlet. If a 120 V AC appliance that consumes more
than the maximum capacity is used, the protection circuit will cut the power
supply.
Appliances that may not operate properly (120 V AC)
The following 120 V AC appliances may not operate even if their power con-
sumption is under maximum capacity.
Appliances with high initial peak wattage
Measuring devices that process precise data.
Other appliances that require an extremely stable power supply
To prevent battery discharge
Turn off all the vehicle's electronic equipment and accessories, such as the
headlights and air conditioning, when electrical appliances that consume in
excess of 100 W are used continuously for long periods of time.
To prevent any damage caused by heat
Do not use any electrical appliances that give off intense heat, such as
toasters, in any locations including the internal or external trim, seats and
deck.
Do not use any electrical appliances that are easily affected by vibration or
heat inside the vehicle. Vibration while driving, or the heat of the sun while
parking, may result in damage to those electrical appliances.
346
6-3. Do-it-yourself maintenance
Fuses
(
P. 380)
Fuse with same amperage rating as original
Light bulbs
(
P. 383)
Bulb with same number and wattage rating as
original
Phillips-head screwdriver
Flathead screwdriver
• Wrench
Power
steering
fluid
level
(
P. 358)
Automatic transmission fluid DEXRON
®
II or III
Rag or paper towel
Clean funnel
Radiator
and
con-
denser
(
P. 355)
Tire inflation pressure
(
P. 369)
Tire pressure gauge
Compressed air source
Washer fluid
(
P. 362)
Water or washer fluid containing antifreeze (for
winter use)
• Funnel (used only for adding water or washer
fluid)
Items
Parts and tools
349
6-3. Do-it-yourself maintenance
6
Maintenance and care
Engine compartment
Washer fluid tank (
P. 362)
Power steering fluid reservoir
(
P. 358)
Engine oil level dipstick
(
P. 351)
Engine coolant reservoir
(
P. 354)
Engine oil filler cap(
P. 352)
Brake fluid reservoir
(
P. 356)
Fuse box
(
P. 380)
Battery
(
P. 359)
Condenser
(
P. 355)
Radiator
(
P. 355)
1
2
3
4
5
6
7
8
9
10
380
6-3. Do-it-yourself maintenance
Turn the engine switch off.
Open the Fuse box cover.
X
Engine compartment
Push the tab in and lift the lid
off.
X
Driver’s side instrument panel
Remove the lid.
Remove the fuse with the pull-
out tool.
Only type A fuse can be removed
using the pullout tool.
Checking and replacing fuses
If any of the electrical components do not operate, a fuse may
have blown. If this happens, check and replace the fuses as nec-
essary.
1
2
3
381
6-3. Do-it-yourself maintenance
6
Maintenance and care
Check if the fuse is blown.
Normal fuse
Blown fuse
Type A, B, C, D, E:
Replace the blown fuse with a new fuse of an appropriate amperage rat-
ing. The amperage rating can be found on the fuse box lid.
Type F:
Contact your Toyota dealer.
4
1
2
X
Type A
X
Type B
X
Type C
X
Type D
X
Type E
X
Type F
382
6-3. Do-it-yourself maintenance
After a fuse is replaced
If the lights do not turn on even after the fuse has been replaced, a bulb may
need replacement. (
P. 383)
If the replaced fuse blows again, have the vehicle inspected by your Toyota
dealer.
If there is an overload in a circuit
The fuses are designed to blow, protecting the wiring harness from damage.
CAUTION
To prevent system breakdowns and vehicle fire
Observe the following precautions.
Failure to do so may cause damage to the vehicle, and possibly a fire or
injury.
Never use a fuse of a higher amperage rating than that indicated, or use
any other object in place of a fuse.
Always use a genuine Toyota fuse or equivalent.
Never replace a fuse with a wire, even as a temporary fix.
Do not modify the fuses or fuse boxes.
NOTICE
Before replacing fuses
Have the cause of electrical overload determined and repaired by your
Toyota dealer as soon as possible.
441
7-2. Steps to take in an emergency
7
When trouble arises
One of the following may be the cause of the problem:
There may not be sufficient fuel in the vehicle’s tank.
Refuel the vehicle.
The engine may be flooded.
Try to restart the engine again following correct starting procedures.
(
P. 191, 194)
There may be a malfunction in the engine immobilizer system.
(
P. 70)
One of the following may be the cause of the problem:
The battery may be discharged. (
P. 447)
The battery terminal connections may be loose or corroded.
The engine starting system may be malfunctioning due to an electrical
problem such as an open circuit or a blown fuse. However, an interim
measure is available to start the engine.
(
P. 442)
If the engine will not start
If the engine will not start even though correct starting proce-
dures are being followed (
P. 191, 194), consider each of the fol-
lowing points:
The engine will not start even though the starter motor operates
normally.
The starter motor turns over slowly, the interior lights and head-
lights are dim, or the horn does not sound or sounds at a low
volume.
The starter motor does not turn over