Toyota 4Runner - 2013 Fuse Box Diagram

Toyota 4Runner - 2013 Fuse Box Diagram

466
3-7. Other interior features
The power outlet can be used when
Vehicles without a smart key system
The engine switch is in the “ACC” or “ON” position.
Vehicles with a smart key system
The “ENGINE START STOP” switch is in ACCESSORY or IGNITION ON
mode.
NOTICE
To avoid damaging the power outlet
Close the power outlet lid when the power outlet is not in use.
Foreign objects or liquids that enter the power outlet may cause a short cir-
cuit.
To prevent blown fuse
Do not use an accessory that uses more than 12 V 10 A.
To prevent battery discharge
Do not use the power outlet longer than necessary when the engine is not
running.
Luggage compartment (vehicles with the 120 V AC)
CTH37AS086
472
3-7. Other interior features
NOTICE
To avoid damaging the power outlet and the plug
Close the power outlet lid when not in use.
Do not allow foreign objects or liquids to enter the power outlet, as this
may cause a short circuit.
Do not use plug adaptors to connect too many plugs to the power outlet.
After removing a plug, gently close the power outlet lid.
To prevent the fuse from being blown
Do not use a 120 V AC appliance that requires more than the maximum
capacity of the power outlet. If a 120 V AC appliance that consumes more
than the maximum capacity is used, the protection circuit will cut the power
supply.
Appliances that may not operate properly (120 V AC)
The following 120 V AC appliances may not operate even if their power con-
sumption is under maximum capacity.
Appliances with high initial peak wattage
Measuring devices that process precise data.
Other appliances that require an extremely stable power supply
To prevent battery discharge
Turn off all the vehicle's electronic equipment and accessories, such as the
headlights and air conditioning, when electrical appliances that consume in
excess of 100 W are used continuously for long periods of time.
To prevent any damage caused by heat
Do not use any electrical appliances that give off intense heat, such as
toasters, in any locations including the internal or external trim, seats and
deck.
Do not use any electrical appliances that are easily affected by vibration or
heat inside the vehicle. Vibration while driving, or the heat of the sun while
parking, may result in damage to those electrical appliances.
523
4-3. Do-it-yourself maintenance
4
Maintenance and care
Items
Parts and tools
Fuses
(
P. 560)
Fuse with same amperage rating
as original
Light bulbs
(
P. 570)
• Bulb with same number and watt-
age rating as original
• Phillips-head screwdriver
• Flathead screwdriver
• Wrench
Power steering fluid level
(
P. 535)
• Automatic transmission fluid
DEXRON
®
II or III
• Rag or paper towel
• Clean funnel
Radiator and condenser
(
P. 532)
Tire inflation pressure
(
P. 548
)
• Tire pressure gauge
• Compressed air source
Washer fluid
(
P. 540)
• Water or washer fluid containing
antifreeze (for winter use)
• Funnel (used only for adding
water or washer fluid)
526
4-3. Do-it-yourself maintenance
Engine compartment
Washer fluid tank (
P. 540)
Power steering fluid reservoir
(
P. 535)
Engine oil level dipstick
(
P. 528)
Engine coolant reservoir
(
P. 531)
Engine oil filler cap
(
P. 528)
Brake fluid reservoir
(
P. 533)
Fuse box
(
P. 560)
Battery
(
P. 537)
Condenser
(
P. 532)
Radiator
(
P. 532)
CTH43AS117
560
4-3. Do-it-yourself maintenance
Checking and replacing fuses
If any of the electrical components do not operate, a fuse may have
blown. If this happens, check and replace the fuses as necessary.
Vehicles without a smart key system
Turn the engine switch off.
Vehicles with a smart key system
Turn the “ENGINE START STOP” switch off.
Open the fuse box cover.
Engine compartment
Push the tab in and lift the lid
off.
Driver’s side instrument panel
Remove the lid.
STEP
1
STEP
2
CTH43AS123
CTH43AS028
561
4-3. Do-it-yourself maintenance
4
Maintenance and care
After a system failure, see “Fuse layout and amperage rat-
ings” (
P. 564) for details about which fuse to check.
Remove the fuse.
Only type A fuse can be
removed using the pull-out
tool.
Check if the fuse is blown.
Type A
Normal fuse
Blown fuse
Replace the blown fuse with a
new fuse of an appropriate
amperage rating. The amper-
age rating can be found on the
fuse box lid.
Type B
Normal fuse
Blown fuse
Replace the blown fuse with a
new fuse of an appropriate
amperage rating. The amper-
age rating can be found on the
fuse box lid.
STEP
3
STEP
4
CTH43AS029
STEP
5
CTH43AS030
CTH43AS031
562
4-3. Do-it-yourself maintenance
Type C
Normal fuse
Blown fuse
Replace the blown fuse with a
new fuse of an appropriate
amperage rating. The amper-
age rating can be found on the
fuse box lid.
Type D
Normal fuse
Blown fuse
Replace the blown fuse with a
new fuse of an appropriate
amperage rating. The amper-
age rating can be found on the
fuse box lid.
Type E
Normal fuse
Blown fuse
Replace the blown fuse with a
new fuse of an appropriate
amperage rating. The amper-
age rating can be found on the
fuse box lid.
CTH43AS073
CTH43AS074
CTH43AS075
563
4-3. Do-it-yourself maintenance
4
Maintenance and care
Type F
Normal fuse
Blown fuse
Contact your Toyota dealer.
CTH43AS076
564
4-3. Do-it-yourself maintenance
Fuse layout and amperage ratings
Engine compartment
Fuse
Ampere
Circuit
1
PTC HTR NO.3
30 A
PTC heater
2
DEF
30 A
Rear window defogger
3
DEICER
20 A
Windshield wiper de-icer
4
AIR PMP HTR
10 A
Air pump heater, AI combina-
tion valve
5
PTC HTR NO.2
30 A
PTC heater
6
SUB BATT
30 A
Trailer sub battery
7
PTC HTR NO.1
50 A
PTC heater
8
MIR HTR
10 A
Outside rear view mirror defog-
gers
9
TOWING TAIL
30 A
Trailer tail light
10
A/C COMP
10 A
Air conditioning system
11
STOP
10 A
Stop/tail lights
12
IG2
20 A
INJ, IGN, GAUGE fuses
13
HORN
10 A
Horn(s)
14
EFI
25 A
Multiport fuel injection system/
sequential multiport fuel injec-
tion system
CTH43AS146
565
4-3. Do-it-yourself maintenance
4
Maintenance and care
15
A/F
20 A
A/F sensor
16
H-LP RH-HI
10 A
Right-hand headlight (high
beam)
17
H-LP LH-HI
10 A
Left-hand headlight (high
beam)
18
HTR
50 A
Air conditioning system
19
400W INV
80 A
Power outlets
20
ST
30 A
Starter system
21
H-LP HI
20 A
H-LP RH-HI, H-LP LH-HI fuses
22
ALT-S
7.5 A
Charging system
23
TURN&HAZ
15 A
Turn signal lights, emergency
flashers
24
ETCS
10 A
Multiport fuel injection system/
sequential multiport fuel injec-
tion system
25
PRB
30 A
Automatic running boards sys-
tem
26
TOWING
30 A
Trailer stop/turn lights
27
SHORT PIN
No circuit
28
RAD NO.1
10 A
Audio system
29
AM2
7.5 A
Starter system
30
MAYDAY
7.5 A
MAYDAY
31
AMP
30 A
Audio system
32
ABS NO.1
50 A
ABS, VSC
33
ABS NO.2
30 A
ABS, VSC
34
AIR PMP
50 A
AIR PMP MTR
35
DOME
10 A
Interior lights, vanity lights
36
ECU-B
10 A
Multiplex communication sys-
tem, meter and gauge
37
H-LP RH-LO
10 A
Right-hand headlight (low
beam)
38
H-LP LH-LO
10 A
Left-hand headlight (low beam)
39
INJ
10 A
Multiport fuel injection system/
sequential multiport fuel injec-
tion system
Fuse
Ampere
Circuit
566
4-3. Do-it-yourself maintenance
*: Replace the fuse with one of the same ampere rating as the origi-
nal
40
EFI NO.2
7.5 A
Multiport fuel injection system/
sequential multiport fuel injec-
tion system
41
ALT
140 A*
HTR, 400W INV, A/C COMP,
TOWING TAIL, SUB BATT,
MIR HTR, DEF, DEICER,
STOP, PTC HTR NO.1, PTC
HTR NO.2, PTC HTR NO.3,
S/HTR FR, ACC, P/OUTLET,
IG1, ECU-IG NO.1, ECU-IG
NO.2, WIP, WASHER, KDSS,
4WD, BKUP LP, TOWING
BKUP, DOOR P, DOOR RL,
DOOR RR, DOOR D, P/SEAT
FL, P/SEAT FR, DOOR, A/C,
OBD, DOOR BACK, S/ROOF,
PANEL, TAIL, FOG FR, D/L
NO.2 fuses, AIR PMP HTR
42
SPARE
10 A
43
SPARE
15 A
44
SPARE
20 A
45
P/I-B
80 A
IG2, EFI, A/F, HORN fuses
46
SECURITY
10 A
Multiport fuel injection system/
sequential multiport fuel injec-
tion system
47
SMART
7.5 A
Smart key system
48
STRG LOCK
20 A
Steering lock system
49
TOWING BRK
30 A
Trailer brake controller
Fuse
Ampere
Circuit
567
4-3. Do-it-yourself maintenance
4
Maintenance and care
Driver’s side instrument panel
Fuse
Ampere
Circuit
1
TAIL
10 A
Stop/tail lights
2
PANEL
7.5 A
Instrument panel lights
3
GAUGE
7.5 A
Meter and gauge
4
IGN
10 A
Multiport fuel injection system/
sequential multiport fuel injec-
tion system, air bag system,
smart key system
5
WASHER
20 A
Wiper and washer
6
WIP
30 A
Wiper and washer
7
S/ROOF
25 A
Electric moon roof
8
DOOR RR
25 A
Power windows
9
DOOR D
25 A
Power windows
10
DOOR BACK
30 A
Multiplex communication sys-
tem
11
DOOR P
30 A
Power windows
12
P/SEAT FR
30 A
Front passenger's power seat
13
S/HTR FR
20 A
Seat heater system
14
ECU-IG NO.2
10 A
Air conditioning system,
multiport fuel injection system/
sequential multiport fuel injec-
tion system
15
IG1
7.5 A
Turn signal lights, emergency
flashers
16
ECU-IG NO.1
10 A
Vehicle stability control sys-
tem, tire pressure warning sys-
tem, steering sensor
17
DOOR
7.5 A
Power windows
568
4-3. Do-it-yourself maintenance
18
DOOR RL
25 A
Power windows
19
AM1
7.5 A
Starter system
20
A/C
7.5 A
Air conditioning system
21
OBD
7.5 A
On-Board diagnosis
22
FOG FR
15 A
Fog lights
23
D/L NO.2
25 A
Multiplex communication sys-
tem
24
P/SEAT FL
30 A
Front driver’s power seat
25
4WD
20 A
Four wheel drive system
26
KDSS
10 A
Kinetic dynamic suspension
system
27
TOWING BKUP
10 A
Trailer back-up lights
28
BKUP LP
10 A
Back-up lights
29
ACC
7.5 A
Multiport fuel injection system/
sequential multiport fuel injec-
tion system
30
P/OUTLET
15 A
Power outlets
Fuse
Ampere
Circuit
569
4-3. Do-it-yourself maintenance
4
Maintenance and care
After a fuse is replaced
If the lights do not turn on even after the fuse has been replaced, a bulb
may need replacement. (
P. 570)
If the replaced fuse blows again, have the vehicle inspected by your
Toyota dealer.
If there is an overload in a circuit
The fuses are designed to blow, protecting the wiring harness from damage.
CAUTION
To prevent system breakdowns and vehicle fire
Observe the following precautions.
Failure to do so may cause damage to the vehicle, and possibly a fire or
injury.
Never use a fuse of a higher amperage rating than that indicated, or use
any other object in place of a fuse.
Always use a genuine Toyota fuse or equivalent.
Never replace a fuse with a wire, even as a temporary fix.
Do not modify the fuses or fuse boxes.
NOTICE
Before replacing fuses
Have the cause of electrical overload determined and repaired by your
Toyota dealer as soon as possible.
620
5-2. Steps to take in an emergency
If the engine will not start
If the engine will not start even though correct starting procedures
are being followed (
P. 170, 173), consider each of the following
points:
The engine will not start even though the starter motor
operates normally.
One of the following may be the cause of the problem:
There may not be sufficient fuel in the vehicle’s tank.
Refuel the vehicle.
The engine may be flooded.
Try to restart the engine again following correct starting proce-
dures. (
P. 170, 173)
There may be a malfunction in the engine immobilizer system.
(
P. 113)
The starter motor turns over slowly, the interior lights and
headlights are dim, or the horn does not sound or sounds at
a low volume.
One of the following may be the cause of the problem:
The battery may be discharged. (
P. 627)
The battery terminal connections may be loose or corroded.
The starter motor does not turn over.
The engine starting system may be malfunctioning due to an
electrical problem such as an open circuit or a blown fuse. How-
ever, an interim measure is available to start the engine.
(
P. 621)
W A R R A N T Y
W A R R A N T Y
This warranty also does not cover the following:
N O R M A L S O U N D , V I B R A T I O N A N D D E T E R I O R A T I O N
Conditions related to normal noise, wear, vibration, deterioration,
discolouration, distortion, deformation and fading.
M A I N T E N A N C E E X P E N S E
Normal maintenance services such as: engine tune-ups, lubrication, cleaning
and polishing, replacement of coolant, filters, spark plugs, fuses, remote key/
key fob batteries, worn wiper blades, brake pads/linings and clutch linings.
V E H I C L E S W I T H A L T E R E D O D O M E T E R R E A D I N G
Failure of a vehicle on which the odometer has been altered or changed so that
the actual kilometres driven cannot be determined.
S A L V A G E O R W R I T T E N - O F F V E H I C L E S
The new vehicle warranty no longer applies on any Toyota vehicle which is
designated at any time as salvaged, scrapped, junked, totalled or written off.
I N C I D E N T A L D A M A G E S
Incidental or consequential damages associated with a vehicle failure. Such
damages include but are not limited to inconvenience, the cost of
transportation (unless expressly provided in this warranty), telephone calls and
lodging, the loss of personal or commercial property, and the loss of pay or
revenue.
T I R E S
Tires originally installed on a new 2013 model year Toyota vehicle are
warranted by the respective tire manufacturer. Refer to the tire pamphlet
provided with your Toyota vehicle. If an original tire on your Toyota vehicle has
a defect during the term of the tire manufacturer warranty, please contact
your authorized Toyota dealer for assistance.
Any implied warranty of merchantability or fitness for a particular purpose
applicable to this vehicle, where permitted by law, is limited in duration to the
duration of this written warranty. The performance of repairs and needed
adjustments is the exclusive remedy under this written warranty or any implied
warranty. Toyota shall not be liable for incidental or consequential damages by
reasons of this written warranty or any implied warranty.
The provision of the above written warranties is in addition to any statutory
warranties or other rights or remedies as may otherwise exist at law.
Toyota does not authorize any person or corporation to assume for it any
obligation or liability or make any representation in respect of the
Toyota New
Vehicle Warranty.
1 3
Toyota New Vehicle Warranty