Polaris Sportsman X2 550 - 2013 Fuse Box Diagram

Polaris Sportsman X2 550 - 2013 Fuse Box Diagram

37
FEATURES AND CONTROLS
Front Box/Compartment
Release the front box anchor latches
and remove the box assembly to gain
access to the front compartment. To
reinstall the box, hold the box as
shown in the rack illustration. Posi-
tion the front edge in the tabs, then
push the box downward and secure
the latches.
Access the following components in
the front compartment:
Radiator cap
Brake fluid reservoir
ADC fluid reservoir
• Battery
Coolant recovery bottle cap
Electrical/fuse/relay components
Latches
ADC Fluid
Reservoir
Brake Fluid
Reservoir
Radiator
Cap
Coolant
Bottle Cap
Electrical/Fuse/Relay
Battery
97
MAINTENANCE
Fuse Replacement
If the engine stops or will not start, or if you experience other electrical
failures, a fuse may need replacement. Locate and correct any short cir-
cuits that may have caused the blown fuse, then replace the fuse. Spare
fuses are provided in the fuse box.
1.
Remove the front box.
2.
Remove the fuse box cover.
3.
Remove the suspect fuse from the fuse panel. If the fuse is blown,
install a new fuse with the same amperage rating.
4.
Reinstall the fuse box cover.
5.
Reinstall the front box.
Fuse Box
131
WARRANTY
WARRANTY COVERAGE AND EXCLUSIONS:
LIMITATIONS OF WARRANTIES AND REMEDIES
The POLARIS limited warranty excludes any failures that are not caused by a defect in
material or workmanship. This warranty does not cover accidental damage, normal wear
and tear, abuse or improper handling. This warranty also does not cover any vehicle that
has been altered structurally, modified, neglected, improperly maintained, used for rac-
ing, or used for purposes other than for which it was manufactured, or for any damages
which occur during trailer transit or as a result of unauthorized service or the use of
unauthorized parts. In addition, this warranty does not cover physical damage to paint or
finish, stress cracks, tearing or puncturing of upholstery material, corrosion, or defects in
parts, components or the vehicle due to fire, explosions or any other cause beyond
POLARIS' control.
Warranty does not apply to parts exposed to friction surfaces, stresses, environmental
conditions and/or contamination for which they were not designed or not intended,
including but not limited to the following items:
Wheels and tires
Finished and unfinished surfaces
Suspension components
Carburetor/Throttle body components
Brake components
Engine components
Seat components
Drive belts
Clutches and components
Hydraulic components
Steering components
Circuit breakers/Fuses
Batteries
Electronic components
Light bulbs/Sealed beam lamps